e5e472198c
docs/pyboard/quickref: Refer to new machine.I2C instead of old pyb.I2C.
...
On stm32 boards, machine.I2C is now preferred over pyb.I2C.
2019-05-20 15:46:01 +10:00
8bec0e869d
docs/machine.I2C: Add writevto method to write a vector of byte bufs.
...
This allows to efficiently send to an I2C slave data that is made up of
more than one buffer. Instead of needing to allocate temporary memory to
combine buffers together this new method allows to pass in a tuple or list
of buffers. The name is based on the POSIX function writev() which has
similar intentions and signature.
The reasons for taking this approach (compared to having an interface with
separate start/write/stop methods) are:
- It's a backwards compatible extension.
- It's convenient for the user.
- It's efficient because there is only one Python call, then the C code can
do everything in one go.
- It's efficient on the I2C bus because the implementation can do
everything in one go without pauses between blocks of bytes.
- It should be possible to implement this extension in all ports, for
hardware and software I2C.
Further discussion is found in issue #3482 , PR #4020 and PR #4763 .
2019-05-20 14:51:56 +10:00
f812394c33
docs/esp32: Correct quickref for ESP32 hardware SPI with non-default IO.
2019-05-10 15:56:13 +10:00
34942d0a72
stm32/machine_uart: Change default UART timeout to 0, for non blocking.
...
It's more common to need non-blocking behaviour when reading from a UART,
rather than having a large timeout like 1000ms (the original behaviour).
With a large timeout it's 1) likely that the function will read forever if
characters keep trickling it; or 2) the function will unnecessarily wait
when characters come sporadically, eg at a REPL prompt.
2019-05-07 13:56:42 +10:00
6323cbda4f
docs/esp8266: Add tutorial for APA102 LEDs.
2019-05-07 11:45:10 +10:00
ef9843653b
extmod/moducryptolib: Add AES-CTR support.
...
Selectable at compile time via MICROPY_PY_UCRYPTOLIB_CTR. Disabled by
default.
2019-05-06 18:09:48 +10:00
d4e182039f
docs/cmodules: Note the various ways MODULE_EXAMPLE_ENABLED can be set.
2019-04-18 11:59:43 +10:00
fd58136d6b
docs/cmodules: Fix example to globally define MODULE_EXAMPLE_ENABLED.
...
MODULE_EXAMPLE_ENABLED must be globally defined for the module to be seen
and referenced by all parts of the code.
2019-04-15 11:56:22 +10:00
0fb15fc3f4
docs/develop: Remove paragraph that was copied in error from other doc.
2019-03-29 11:50:39 +11:00
95b6330403
docs/esp32: Add example for pin isolation in combination with deepsleep.
2019-03-28 15:25:41 +11:00
28c2873d99
docs/esp32: Add a note to quickref about use of Pin.PULL_HOLD.
2019-03-14 07:38:50 +11:00
6fa830bfd8
docs/library/machine.Pin: Add PULL_HOLD constant to possible pin pulls.
...
As already mentioned in the docs, not all constants may be available on all
ports, so this is optional to implement.
2019-03-14 07:29:04 +11:00
912e957512
docs/develop: Fix typos in C-module example for example_add_ints.
2019-03-13 12:54:01 +11:00
ea95bdc1ca
docs/pyboard: Make pyboard v1.1 pinout the default shown in quickref.
2019-03-13 12:37:35 +11:00
d390ad9053
docs/pyboard: Add link to pyboard v1.1 schematic and layout PDF.
2019-03-13 12:33:02 +11:00
89ff506513
py: Update and rework build system for including external C modules.
...
How to use this feature is documented in docs/develop/cmodules.rst.
2019-03-08 22:58:42 +11:00
2e516074da
py: Implement a module system for external, user C modules.
...
This system makes it a lot easier to include external libraries as static,
native modules in MicroPython. Simply pass USER_C_MODULES (like
FROZEN_MPY_DIR) as a make parameter.
2019-03-08 22:49:00 +11:00
9521399044
docs/uos: Document extra requirements on stream objs passed to dupterm.
...
This is only correct for the extmod/uos_dupterm.c implementation however,
as e.g cc3200 implementation does the mp_load_method() itself, and anyway
requires `read` instead of `readinto`.
2019-02-26 01:12:37 +11:00
812969d615
all: Change PYB message prefix to MPY.
...
Replaces "PYB: soft reboot" with "MPY: soft reboot", etc.
Having a consistent prefix across ports reduces the difference between
ports, which is a general goal. And this change won't break pyboard.py
because that tool only looks for "soft reboot".
2019-02-12 15:18:33 +11:00
a0d60c574a
docs/ure: Fix match.group signature to indicate index param is required.
2019-02-08 17:06:19 +11:00
4dfcc255d5
docs: Convert all cases of machine.sleep to machine.lightsleep.
2019-01-30 14:15:51 +11:00
b16146d189
docs/machine: Change sleep to lightsleep and add timeout arguments.
...
The machine.sleep() function can be misleading because it clashes with
time.sleep() which has quite different semantics. So change it to
machine.lightsleep() which shows that it is closer in behaviour to
machine.deepsleep().
Also, add an optional argument to these two sleep functions to specify a
maximum time to sleep for. This is a common operation and underlying
hardware usually has a special way of performing this operation.
The existing machine.sleep() function will remain for backwards
compatibility purposes, and it can simply be an alias for
machine.lightsleep() without arguments. The behaviour will be the same.
2019-01-27 11:12:16 +11:00
3e25d611ef
all: Bump version to 1.10.
2019-01-26 00:56:48 +11:00
acd647100b
docs/library: Add documentation for esp32 module.
2019-01-25 12:18:34 +11:00
69e72954ad
docs: Add initial docs for esp32 port, including quick-ref and general.
...
With contributions from Oliver Robson (@HowManyOliversAreThere), Sean
Lanigan (@seanlano) and @rprr.
2019-01-25 12:18:34 +11:00
5064df2074
docs/differences: Clarify the differences are against Python 3.4.
2019-01-11 12:11:02 +11:00
169b152f29
docs/ure: Fully describe supported syntax subset, add example.
2018-12-13 01:16:30 +11:00
beeeec292b
docs/README: Remove references to MICROPY_PORT when building docs.
...
The docs are now built as one for all ports.
2018-12-11 02:55:22 +11:00
42d0a28117
docs/conf.py: Use https for intersphinx link to docs.python.org.
...
To get rid of warning when building the docs saying there's a redirect from
http: to https:.
2018-10-23 11:47:35 +11:00
dd76c8dc0f
docs/library/uctypes: Add examples and make general updates.
...
Examples are added to the beginning of the module docs, similarly to docs
for many other modules.
Improvements to grammar, style, and clarity. Some paragraphs are updated
with better suggestions. A warning added of the effect incorrect usage of
the module may have. Describe the fact that offset range used in one
defined structure is limited.
2018-10-23 11:42:30 +11:00
b031b6f4dd
docs/pyb.Pin: Minor typo fix to specify Pin in pyb.Pin.cpu.
2018-10-19 17:31:59 +11:00
5f7088f84d
docs/uio: Document StringIO/BytesIO(alloc_size) constructors.
2018-10-18 12:39:25 +11:00
759853f2a1
docs/machine.Pin: Document "hard" argument of Pin.irq method.
2018-10-15 00:17:54 +11:00
7de9211b80
docs/machine.Pin: Add note regarding irq handler argument.
2018-10-13 16:25:42 +11:00
f5d46a88aa
lib/utils/pyexec: Forcefully unlock the heap if locked and REPL active.
...
Otherwise there is really nothing that can be done, it can't be unlocked by
the user because there is no way to allocate memory to execute the unlock.
See issue #4205 and #4209 .
2018-10-13 16:21:08 +11:00
d251f26688
docs/uselect: Describe more aspects of poll.register/modify behavior.
...
E.g., register() can be called again for the same object, while modify()
will raise exception if object was not register()ed before.
2018-10-05 16:57:58 +10:00
86819a52fe
docs/wipy: Fix links to network.Server, and markup for boot.py.
2018-10-01 14:08:02 +10:00
d1adfee251
docs: Remove sphinx_selective_exclude, it's no longer used.
2018-10-01 13:54:32 +10:00
b3e013f60e
docs: Unify all the ports into one set of documentation.
...
With this commit there is now only one entry point into the whole
documentation, which describes the general MicroPython language, and then
from there there are links to information about specific platforms/ports.
This commit doesn't change content (almost, it does fix a few internal
links), it just reorganises things.
2018-10-01 13:53:53 +10:00
8a84e08dc8
docs/library/network: Make AbstractNIC methods layout correctly.
2018-09-27 17:24:41 +10:00
217566b764
docs/library/network: Move specific network classes to their own file.
...
All concrete network classes are now moved to their own file (eg
network.WLAN.rst) and deconditionalised (remove ..only:: directives). This
makes the network documentation the same for all ports. After this change
there are no more "..only::" directives for different ports, and the only
difference among ports is the very front page of the docs.
2018-09-27 17:23:42 +10:00
09c5c58a1f
docs/library/machine.SPI: Add note about baudrate imprecision.
2018-09-26 15:21:10 +10:00
ad4fb62f13
docs/pyboard: Fix to use Sphinx style for internal/external links.
2018-09-20 17:14:13 +10:00
927a5d1dfd
docs/library/pyb: Add deprecation warning for mount and old block proto.
...
pyb.mount(None, mountpoint) functionality is also removed and replaced by
uos.umount.
2018-09-20 16:31:36 +10:00
b18fa1e606
docs/library/machine.UART.rst: Specify optional txbuf and rxbuf args.
...
If a port would like to expose the configuration of transmit and/or receive
buffers then it can use these arguments.
2018-08-14 15:21:54 +10:00
163bacd1e8
docs/library/machine.I2C.rst: Clarify availability of primitive I2C ops.
2018-08-04 15:53:12 +10:00
d8e0320485
docs: Move WiPy specific Timer class to separate doc file.
...
The WiPy machine.Timer class is very different to the esp8266 and esp32
implementations which are better candidates for a general Timer class. By
moving the WiPy Timer docs to a completely separate file, under a new name
machine.TimerWiPy, it gives a clean slate to define and write the docs for
a better, general machine.Timer class. This is with the aim of eventually
providing documentation that does not have conditional parts to it,
conditional on the port.
While the new docs are being defined it makes sense to keep the WiPy docs,
since they describe its behaviour. Once the new Timer behaviour is defined
the WiPy code can be changed to match it, and then the TimerWiPy docs would
be removed.
2018-07-31 23:40:06 +10:00
81e320aecc
docs/library/machine: Remove conditionals in machine class index.
...
The machine module should be standard across all ports so should have the
same set of classes in the docs. A special warning is added to the top of
the machine.SD class because it is not standardised and only available on
the cc3200 port.
2018-07-20 15:58:18 +10:00
0ab8428995
docs/reference/index: Remove conditional for inline asm docs.
...
The heading of this section makes it clear it is for Thumb-2 architectures
only.
2018-07-20 15:51:06 +10:00
5b1ca66668
docs/library/index: Add hint about using help('modules') for discovery.
2018-07-20 15:47:42 +10:00
84d5dd46fe
docs/library/index: Remove all conditionals from library index.
...
It's fair to just provide a link to all available modules, regardless of
the port. Most of the existing ports (unix, stm32, esp8266, esp32) share
most of the same set of modules anyway, so no need to maintain separate
lists for them. And there's a big discussion at the start of this index
about modules not being available on a given port.
For port-specific modules, they can also be listed unconditionally because
they have headings that explicitly state they are only available on certain
ports.
2018-07-20 15:34:22 +10:00
3e0d587a49
docs/library/machine: Remove conditional docs for rng function.
...
And instead list its availability explicitly.
2018-07-18 16:28:30 +10:00
163cc66a0b
docs/library/machine: Remove conditional docs for wake_reason function.
...
And instead list its availability explicitly.
2018-07-18 16:23:34 +10:00
4cc65e22d4
docs/library/machine.UART: Remove conditional docs for wipy port.
...
The UART.init() method is now included unconditionally and its wording
adjusted to better describe ports other than the cc3200.
UART.irq() is also included unconditionally, but this is currently only
available on the WiPy target.
2018-07-18 16:20:53 +10:00
164377f806
docs/library/pyb.DAC: Fix typo in markup to balance quotes.
2018-07-18 15:52:48 +10:00
805fd0cfe6
docs/library: Remove "only" directive from all pyb module docs.
...
By virtue of its name, the pyb module would only be available on a pyboard
and so does not need to have conditional "only" directives throughout its
documentation.
These conditionals were added mostly in
cfcf47c0644542643025
2018-07-18 15:47:44 +10:00
2cff340357
docs/pyboard: For latex build, use smaller quickref jpg, and no gifs.
...
The latexpdf target needs images that fit on the page, and does not support
gifs.
2018-07-10 12:45:52 +10:00
41226e9a18
docs/ure: Document some more supported regex operators.
2018-07-02 14:55:05 +10:00
4727bd1db8
docs/ure: Document sub(), groups(), span(), start() and end().
2018-07-02 14:55:05 +10:00
ab02abe96d
docs/uos: Make it clear that block device block_num param is an index.
2018-06-28 13:25:10 +10:00
473fe45da2
extmod/moducryptolib: Optionally export MODE_* constants to Python.
...
Allow including crypto consts based on compilation settings. Disabled by
default to reduce code size; if one wants extra code readability, can
enable them.
2018-06-27 16:29:26 +10:00
11a7a70a6f
docs/usocket: Minor fixes to grammar of getaddrinfo.
2018-06-27 15:18:46 +10:00
2e3468a68c
docs/usocket: getaddrinfo: Describe af/type/proto optional params.
...
These can be optionally specified, but all ports are expected to be able to
accept them, at the very least ignore, though handling of "type" param
(SOCK_STREAM vs SOCK_DGRAM) is recommended.
2018-06-27 14:57:19 +10:00
12fde67a25
docs/ucryptolib: Add docs for new ucryptolib module.
2018-06-27 14:57:11 +10:00
b9ec6037ed
docs/library: Add documentation for ucollections.deque.
2018-06-26 14:29:22 +10:00
5731e535dd
docs/esp8266: Fix minor typo in "certificates".
2018-06-25 17:36:28 +10:00
6c955932f3
stm32/rtc: Don't try to set SubSeconds value on RTC.
...
The hardware doesn't allow it, instead the value is reset to 255 upon
setting the other calendar/time values.
2018-05-21 14:08:37 +10:00
421b84af99
docs: Bump version to 1.9.4.
2018-05-11 16:39:59 +10:00
c7818032b1
docs/library: Add ussl module to library index for unix port.
2018-04-26 17:14:51 +10:00
c24b0a7f2b
docs/library/pyb.ADC: Fix typo of "prarmeter".
2018-04-20 15:54:09 +10:00
0600645944
docs/library/pyb.ADC: Remove outdated ADCAll code example.
2018-04-20 15:52:28 +10:00
b30e0d2f26
stm32/dac: Add buffering argument to constructor and init() method.
...
This can be used to select the output buffer behaviour of the DAC. The
default values are chosen to retain backwards compatibility with existing
behaviour.
Thanks to @peterhinch for the initial idea to add this feature.
2018-04-11 14:22:21 +10:00
aebd9701a7
stm32/adc: Optimise read_timed_multi() by caching buffer pointers.
2018-04-11 14:09:09 +10:00
4f40fa5cf4
stm32/adc: Add read_timed_multi() static method, with docs and tests.
2018-04-11 13:36:17 +10:00
8f11d0b532
docs/library/pyb.ADC.rst: Document new features for ADCAll.
2018-04-10 13:06:26 +10:00
0abbafd424
stm32/can: Add "list" param to CAN.recv() to receive data inplace.
...
This API matches (as close as possible) how other pyb classes allow inplace
operations, such as pyb.SPI.recv(buf).
2018-03-19 15:12:24 +11:00
b7d576d69a
docs/library/pyb.CAN: Clean up documentation of data constants.
2018-03-16 18:29:43 +11:00
a25e6c6b65
stm32/can: Add CAN.info() method to retrieve error and tx/rx buf info.
2018-03-16 18:28:35 +11:00
d7e67fb1b4
stm32/can: Add CAN.state() method to get the state of the controller.
...
This is useful for monitoring errors on the bus and knowing when a restart
is needed.
2018-03-16 17:10:41 +11:00
1272c3c65d
stm32/can: Add CAN.restart() method so controller can leave bus-off.
2018-03-15 17:29:30 +11:00
823ca03008
stm32/can: Add "auto_restart" option to constructor and init() method.
2018-03-15 17:17:33 +11:00
d91a1989f5
docs/library/pyb.CAN: Update markup to use latest doc conventions.
2018-03-15 16:30:05 +11:00
0db49c37a4
docs: Fix some references and RST markup to eliminate Sphinx warnings.
2018-03-15 15:50:51 +11:00
4d3a92c67c
extmod/vfs_fat: Add file size as 4th element of uos.ilistdir tuple.
2018-03-12 12:26:36 +11:00
9cef2b03a7
docs/reference/repl.rst: Fix some minor errors in the REPL tutorial.
2018-03-09 16:14:58 +11:00
8359210e71
docs/library/uos: Document mount, umount, VfsFat and block devices.
2018-03-07 14:50:38 +11:00
63b003d523
docs/library/uos: Create sections for distinct parts and document uname.
2018-03-07 14:49:25 +11:00
a5fb699d87
docs/library/micropython: Describe optimisation levels for opt_level().
2018-03-05 19:10:45 +11:00
6e09320b4c
docs/library/usocket: Make xref to uerrno explicitly a module reference.
2018-03-05 19:07:39 +11:00
c5fe610ba1
esp8266/modnetwork: Implement WLAN.status('rssi') for STA interface.
...
This will return the RSSI of the AP that the STA is connected to.
2018-02-26 16:41:13 +11:00
e05fca4ef3
docs/library/ujson: Document dump() and load() functions.
2018-02-15 11:37:48 +11:00
9e8b7b1b63
docs/library/ujson: Update to conform with docs conventions.
...
The formatting of exception objects is done as per CPython conventions, eg:
:exc:`TypeError`
2018-02-15 11:31:34 +11:00
298b325f3e
docs/esp8266: Add a note concerning GPIO16 pull capabilities.
2018-02-15 11:15:12 +11:00
d072573226
docs/esp8266: Update PWM doc regarding clipping of min/max values.
2018-02-15 11:14:34 +11:00
e708e87139
docs/library/pyb.rst: Add note about availability of USB MSC-only mode.
2018-02-01 15:52:49 +11:00
5de064fbd0
docs/library/index: Elaborate uPy libraries intro.
2017-12-23 21:21:08 +02:00
e37ccfe59b
docs/packages: Explicitly recommend usage of setuptools instead of distutils.
2017-12-16 10:42:30 +02:00
9251f1395e
docs/packages: Use "install_dir/" in examples.
2017-12-16 10:37:36 +02:00
02d2a0fb3a
docs/conf: Reference CPython 3.5 docs.
...
CPython 3.6 contains some backward incompatible changes, and further
version(s) are expected to have more. As we anyway implemente 3.4 with
some features of 3.5, refer to 3.5 docs to avoid confusion.
Examples of 3.6 backward incompatibilities:
https://docs.python.org/3.6/library/json.html#json.dump
https://docs.python.org/3.6/library/json.html#json.load
> Changed in version 3.6: All optional parameters are now keyword-only.
https://docs.python.org/3.6/library/functions.html#type
> Changed in version 3.6: Subclasses of type which don’t override
> type.__new__ may no longer use the one-argument form to get the
> type of an object.
https://docs.python.org/3.6/library/collections.html#collections.namedtuple
> Changed in version 3.6: The verbose and rename parameters became
> keyword-only arguments.
2017-12-16 01:22:46 +02:00
448d93a04a
docs/glossary: micropython-lib: Clarify wording.
2017-12-15 00:11:02 +02:00
bf73ee114f
docs/packages: mpy_bin2res no longer required to create resources.
...
Everything happens automagically with overridden "sdist" from
sdist_upip.py.
2017-12-14 18:28:10 +02:00
46b35356e1
extmod/modframebuf: Add 8-bit greyscale format (GS8).
2017-12-14 17:36:13 +11:00
34247465c3
extmod/modframebuf: Add 2-bit color format (GS2_HMSB).
...
This format is used in 2-color LED matrices and in e-ink displays like
SSD1606.
2017-12-14 17:13:02 +11:00
1e2b78111b
docs/esp8266/tutorial: Fix typo, change -> changed.
2017-12-13 17:30:02 +11:00
54cd6e3e4b
docs/packages: Add quick "Creating distribution packages" section.
...
Needs more details.
2017-12-13 00:12:37 +02:00
c60fc670ea
docs/reference/packages: Add chapter on distribution packages and deployment.
...
A long overdue overview of preparing packages, installing them with upip,
freezing, dealing with resources. Initial version, more iterations required.
2017-12-11 00:08:41 +02:00
ca8034d6b8
docs/glossary: Clarify wording for "baremetal".
2017-12-06 00:08:24 +02:00
3ff7040c8a
docs/library: Add xrefs to "stream" dictionary entry for many modules.
2017-12-04 18:36:20 +02:00
155ec21e49
docs/glossary: Describe string interning.
2017-12-04 01:01:03 +02:00
8175f1608e
docs/glossary: Describe "stream" term.
2017-12-03 18:56:18 +02:00
140acc9a32
docs/uerrno: Fix xref-vs-code markup.
2017-12-03 15:50:37 +02:00
4fee35a32c
docs/glossary: Describe the callee-owned tuple concept.
2017-12-03 15:08:39 +02:00
cb9da2279b
docs/uselect: ipoll: Fix grammar/wording of one-shot flag description.
2017-11-30 20:32:49 +02:00
7d25a19220
docs/library/utime: Fix incorrect example with ticks_diff args order.
...
The parameter order in the example for ticks_diff was incorrect. If it's
"too early" that means that scheduled time is greater than current time and
if it's "running late" then scheduled time would be less than current time.
2017-11-30 14:56:08 +11:00
f59c6b48ae
docs/uselect: Describe POLLHUP/POLLERR semantics in more details.
...
Per POSIX, http://pubs.opengroup.org/onlinepubs/9699919799/functions/poll.html
these flags aren't valid in the input eventmask. Instead, they can be
returned in unsolicited manner in the output eventmask at any time.
2017-11-26 09:58:19 +02:00
50cffcfe2c
docs/uctypes: Tweak descriptor reference to hopefully be easier to follow.
...
Put offset first in OR expressions, and use "offset" var instead of
hardcoded numbers. Hopefully, this will make it more self-describing
and show patterns better.
2017-11-25 09:02:08 +02:00
c23cc4cc81
docs/uctypes: Typo/article fixes.
2017-11-25 09:01:11 +02:00
067bf849d2
docs/uselect: poll: Explicitly specify that no-timeout value is -1.
2017-11-23 18:03:32 +02:00
ec1e9a10a7
docs: Add notes on heap allocation caused by bound method refs.
2017-11-23 11:35:58 +11:00
31550a52e4
docs/library/network: Enhance AbstractNIC.status to take an argument.
...
The argument is optional and if given should be a string naming the
status variable to query.
2017-11-16 14:48:04 +11:00
579b86451d
docs/_thread: Add a placeholder docs for _thread module.
...
Doesn't list specific API calls yet, the purpose is to let user know that
the module exists.
2017-11-10 00:09:43 +02:00
5b1b80a8db
docs/ure: Emphasize not supported features more.
...
Plus, additional descriptions/formatting.
2017-11-08 00:24:39 +02:00
ad5a6f5917
docs/ure: Add flags arg to ure.compile(), mention that ure.DEBUG is optional.
2017-11-04 00:26:31 +02:00
1742ab2653
docs/esp8266/general: Minor grammar fixes.
2017-11-02 00:38:58 +02:00
58c785632f
docs/esp8266/general: TLS limitations: Mention also "ussl" module limitations.
2017-11-01 08:59:42 +02:00
fe45d78b1e
docs: Bump version to 1.9.3.
2017-11-01 11:19:56 +11:00
80e3f07e7f
docs/ure: Add "|" (alternative) to the list of supported operators.
2017-10-31 14:46:08 +02:00
b81fbf938f
docs/usocket: Document that settimeout() isn't supported by all ports.
...
And describe an alternative of using uselect.poll().
2017-10-31 00:28:28 +02:00
4dd523adbb
docs/esp8266/general: Add section on TLS limitations.
2017-10-30 19:50:57 +02:00
6fb093282b
docs/ussl: Fix module name refs and use "MicroPython port" term.
2017-10-30 18:03:54 +02:00
05a2bb888f
docs/reference/isr_rules: Minor typo correction.
2017-10-30 13:29:00 +11:00
b9923262db
docs/library/network: Add dhcp_hostname parameter
...
I have not actually tested this, going by information available in https://forum.micropython.org/viewtopic.php?t=2584
2017-10-27 11:04:52 +03:00
a33fca99a1
docs/usocket: Document inet_ntop(), inet_pton().
2017-10-27 00:27:27 +03:00
d1cd533134
docs/usocket: Elaborate descriptions.
...
Use the "usocket" module name everywhere. Use "MicroPython port"
terminology. Suggest to avoid using IPPROTO_* constants in socket()
call.
2017-10-26 14:20:37 +03:00
328c1e78be
docs/uselect: Document one-shot polling mode.
2017-10-26 00:30:07 +03:00
d90ade5e3e
docs/library/network: Update docs to state that W5500 is supported.
2017-10-16 15:51:56 +11:00
65ba481cb0
stm32/modnwwiznet5k: Implement WIZNET5K.isconnected() method.
2017-10-16 13:16:00 +11:00
b1457db002
docs/library: Add missing cross-ref links for classes in pyb module.
2017-10-11 11:30:16 +11:00
f599a38059
docs/esp8266/quickref: Add quickref info for RTC class.
2017-10-10 15:22:23 +11:00
dc92f1c4ee
docs/pyboard/tutorial: Update now that yellow LED also supports PWM.
2017-10-10 15:22:11 +11:00
d236d0c415
docs/pyboard/quickref: Add info for Switch, RTC, CAN, Accel classes.
2017-10-10 15:22:11 +11:00
add933feaf
docs/library/network: Clarify usage of "bssid" arg in connect() method.
2017-10-09 23:11:25 +11:00
9e0cdb22f1
docs/esp8266/tutorial: Update neopixel with example of using 4 bbp.
2017-10-04 10:35:22 +11:00
72491b3e40
docs/btree: Describe page caching policy of the underlying implementation.
2017-09-17 21:35:33 +03:00
d42b89bc3a
docs/library/framebuf.rst: Generalise constructor to all colour formats.
2017-09-13 16:36:57 +10:00
da1c80d850
docs/reference/isr_rules.rst Add tutorial on use of micropython.schedule().
2017-09-09 16:05:24 +03:00
4a93801c12
all: Update Makefiles and others to build with new ports/ dir layout.
...
Also renames "stmhal" to "stm32" in documentation and everywhere else.
2017-09-06 14:09:13 +10:00
fe6f0354f6
docs/library/micropython: Fix typo in RST formatting.
2017-08-29 16:53:30 +10:00
e30ba2f1c7
docs/library: Add description of "index" parameter to uos.dupterm().
2017-08-29 16:50:28 +10:00
d5336ba136
docs/machine.Signal: Improve style/grammar and add usage example.
2017-08-29 00:08:40 +03:00
Damien George
Nicko van Someren
Mike Causer
Yonatan Goldschmidt
Daniel O'Connor
spacemanspiff2007
Martin Fischer
johnthagen
Andrew Leech
Ayke van Laethem
Matt Trentini
stijn
Paul Sokolovsky
Dave Hylands
Peter Hinch
jcea
T S
Tom Collins
Olivier Ortigues
Petr Viktorin
Ryan Finnie
Paul Carver
Yuval Langer
Joar Wandborg
Gabe