root
aac324c4d1
added frozen modules, changed to 8BM FLASH
2022-12-18 22:49:28 +00:00
RetiredWizard
68d510cb2f
Update mpconfigboard.h
...
Configure LED pin for STATUS display and to prevent ESP floating pins from constantly lighting led dimly.
2022-12-07 23:00:09 -05:00
Dan Halbert
676e40d62f
Merge pull request #7311 from dhalbert/esp32-box-lite-sdkconfig
...
make esp32-box-lite sdkconfig same as box
2022-12-06 21:31:45 -05:00
Dan Halbert
3965ef9c2a
make esp32-box-lite sdkconfig same as box
2022-12-06 19:27:00 -05:00
evildave666
eaf39b4c10
Update pins.c
2022-12-05 16:40:36 +09:00
evildave666
14b430ed35
Fix pre-commit issues
2022-12-05 16:35:48 +09:00
evildave666
5b6f06d84c
Add additional files
2022-12-05 16:08:12 +09:00
evildave666
05a8bf8c38
Create board.c
2022-12-05 16:06:50 +09:00
m1cha1s
b5dda0b770
Removed esp32_devkit_v1 folder
2022-12-02 14:26:46 +01:00
m1cha1s
d904d8e9a0
Renamed the board folder to doit_esp32_devkit_v1
2022-11-30 20:26:41 +01:00
m1cha1s
680e56c52a
Changed creator id
2022-11-25 14:09:35 +01:00
m1cha1s
26fbb25653
Fixed formatting
2022-11-25 13:55:06 +01:00
m1cha1s
fb46e7c4d8
Defined esp32 board for the esp32 devkit v1
2022-11-25 12:13:44 +01:00
Dan Halbert
85a83b8150
Simplify some ESP32-C3 board sdkconfig files
2022-11-21 12:35:10 -05:00
MicroDev
3a418379d3
Merge branch 'main' of origin into ESP32-S3-DevKitC-1-N32R8
2022-11-18 09:40:20 +05:30
Neradoc
f9f1edbb08
setup PWM status LED on aithinker ESP32-C3 boards
2022-11-17 20:32:50 +01:00
Jeff Epler
12545fb060
Add prototype feather esp32s2/s3 reverse tft board definition
...
This is not final hardware and may change!
2022-11-15 20:22:20 -06:00
root
43566dec5b
allow inclusion of board while blocking build files
2022-11-13 12:13:32 +00:00
root
6c3b9b64da
add crcibernetica-ideaboard
2022-11-12 03:22:15 +00:00
dronecz
11ce074318
Update mpconfigboard.mk
2022-11-08 23:43:13 +01:00
dronecz
a568a5c2e2
Rename sdkonfig to sdkconfig
2022-11-06 22:14:19 +01:00
dronecz
f1e658f8bb
Update sdkonfig
2022-11-06 22:07:12 +01:00
dronecz
882100a87a
Create sdkonfig
2022-11-02 22:10:44 +01:00
dronecz
71b5e6088b
Update mpconfigboard.mk
2022-11-02 22:07:28 +01:00
dronecz
d6fe378456
Update mpconfigboard.h
2022-11-02 22:05:39 +01:00
dronecz
9b1181804c
Merge branch 'adafruit:main' into main
2022-10-30 19:16:05 +01:00
dronecz
468709abcc
Update pins.c
...
Hopefully last change nefore merge.
2022-10-30 18:51:46 +01:00
dronecz
ae8f415bd5
Update board.c
2022-10-30 02:17:38 +02:00
Neradoc
0aa41fa92e
change BOARD_USER_SAFE_MODE_ACTION into a separate sentence
2022-10-30 01:55:42 +02:00
Neradoc
934d2a7004
remove duplicate press boot button, it's already the default
2022-10-30 01:52:17 +02:00
dronecz
5d7c58da5d
Update pins.c
...
Attempt to fix build issue
2022-10-30 01:52:09 +02:00
Dan Halbert
a064b52ad7
CIRCUITPY_ESP32_CAMERA, not CIRCUITPY_USB_CAMERA
2022-10-29 10:13:11 -04:00
Dan Halbert
2ffd16a10c
Update mpconfigboard.mk
2022-10-29 09:27:09 -04:00
CDario
19fd9107a2
Merded with main branch
2022-10-29 07:46:54 +00:00
CDarius
7282bd9c9a
Removed boilerplate already handled by MP_WEAK definitions
...
Co-authored-by: Dan Halbert <halbert@halwitz.org>
2022-10-29 09:34:45 +02:00
Dan Halbert
053d0fa8b5
Merge pull request #7145 from chukwon/fix_lolin_s3
...
fix and add lolin_s3 pins definition
2022-10-28 23:50:53 -04:00
chukwon
9c66320474
fix and add lolin_s3 pins definition
2022-10-28 21:40:35 +08:00
CDario
b815a4cc5e
Added safe mode button and fix coyright attribution
2022-10-28 12:06:11 +00:00
CDario
27142d090b
Fixed copyright attribution
2022-10-28 11:08:30 +00:00
CDario
b276ed7af9
Fixed copyright attribution
2022-10-28 05:32:09 +00:00
CDario
b94447fde5
Added safe mode button
2022-10-28 05:00:54 +00:00
Dan Halbert
8fe44a23d2
Merge pull request #7140 from dhalbert/esp32-s3-box-spiram-fix
...
correct SPIRAM settings for ESP32-S3-BOX
2022-10-27 16:09:59 -04:00
Dan Halbert
26688fa826
correct SPIRAM settings for ESP32-S3-BOX
2022-10-27 14:45:29 -04:00
MicroDev
baa44a2dba
Merge pull request #7133 from CDarius/fix_m5stack_core_basic
...
Fixed wrong configuration in sdkconfig
2022-10-27 18:34:07 +05:30
dronecz
d774f3d34f
Update board.c
...
Fix for CLI
2022-10-27 15:02:44 +02:00
dronecz
0e0c106740
Add Maker badge board
2022-10-27 01:06:38 +02:00
CDario
cdbad53649
Fixed wrong configuration in sdkconfig
2022-10-26 20:06:27 +00:00
CDario
be07722bbc
Added board M5Stack Atom Lite
2022-10-26 19:57:23 +00:00
Dan Halbert
5ebdf281cb
Merge pull request #7125 from dhalbert/esp-pin-alarm-fix
...
Fix setup of Espressif PinAlarms
2022-10-26 15:24:58 -04:00
Jeff Epler
366cf4a048
Merge pull request #7113 from CDarius/m5stack_core_fire
...
Added M5Stack Core Fire board
2022-10-26 09:10:50 -05:00
Dan Halbert
e49cd00d60
fix debug UART pins on Metro ESP32-S2
2022-10-25 20:41:08 -04:00
CDario
f6e2369bbd
Removed not available UART in board
2022-10-25 16:53:42 +00:00
CDario
f9983ff556
Added M5Stack Core Basic board
2022-10-25 16:42:14 +00:00
CDario
c8191e8830
Better pins definitions
2022-10-25 11:41:39 +00:00
CDario
5fa67548ea
Added missing sdkconfig file
2022-10-24 20:03:06 +00:00
CDario
39171d7626
Removed unnecessary compiler flags
2022-10-24 19:21:26 +00:00
CDario
beab76c325
Added M5Stack Core Fire board
2022-10-24 18:38:30 +00:00
Neradoc
3c5bf4e852
Update ports/espressif/boards/m5stack_stamp_c3/mpconfigboard.mk
...
Co-authored-by: MicroDev <70126934+MicroDev1@users.noreply.github.com>
2022-10-22 16:23:27 +02:00
askpatrickw
d147712522
Add M5 Stamp C3 board
2022-10-22 00:45:54 +02:00
microDev
5114ae7a31
fix 2MB-no-uf2 partition table
2022-10-17 19:44:08 +05:30
Kong Wai Weng
fc00a6675e
Added some pin definitions to match with the Arduino core.
2022-10-14 17:25:24 +08:00
Dan Halbert
822e806f03
Merge pull request #7031 from BPI-STEAM/CircuitPython-main-bpi-picow-dev
...
Add BananaPi BPI-PicoW-S3 .
2022-10-11 22:53:37 -04:00
Wind-stormger
376df8ec7e
Add BananaPi BPI-PicoW-S3 .
...
Adds support for the BananaPi BPI-PicoW-S3 Boards.
Based on esp32s3 chip.
With one WS2812 LED, one monochrome LED, one ceramic antenna.
Support double-reset to tinyUF2.
2022-10-12 09:11:25 +08:00
microDev
4f753251db
cleanup mpconfigboard.mk of espressif boards
...
- move `INTERNAL_FLASH_FILESYSTEM` to `mpconfigport.mk`
- move `LONGINT_IMPL` to `mpconfigport.mk`
- move `CFG_TUD_TASK_QUEUE_SZ` to `Makefile`
2022-10-06 16:15:01 +05:30
Dan Halbert
296960dd89
shorten board.c
2022-10-05 20:23:19 -04:00
Neradoc
d31acdef6c
we don't use AUTORESET_DELAY_MS
2022-10-06 02:19:48 +02:00
Kyle Mohr
dd5f9411c8
Merge branch 'adafruit:main' into main
2022-10-05 13:44:12 -05:00
Kyle Mohr
02e115cbc2
Update mpconfigboard.mk
2022-10-04 00:03:59 -05:00
Kyle Mohr
330b96726a
add newlines to end of files
2022-10-04 04:56:31 +00:00
Kyle Mohr
5268ef01c9
Utilize VID/PID from native USB port
2022-10-03 23:45:28 -05:00
Kyle Mohr
cffc1bfcab
sdkconfig didn't get committed for some reason...
2022-10-03 22:54:31 -05:00
Kyle Mohr
a948dc399b
add esp32-s2-devkitc-1-n8r2 variant
2022-10-04 03:51:51 +00:00
Dan Halbert
90f6096955
fix ai-thinker creation ids; fix some typos elsewhere
2022-10-03 15:29:03 -04:00
Dan Halbert
9d1b12066d
Espressif: do not hold pins during deep sleep if not necessary
2022-09-29 20:11:48 -04:00
Jeff Epler
a769beed3f
Use new unique ID for this board
2022-09-22 16:23:38 -05:00
Jeff Epler
1091d51af2
Merge pull request #6918 from UnexpectedCircuitPython/main
...
Added support for Unexpected Maker TinyPICO (V2/V3) and TinyPICO Nano
2022-09-17 21:39:17 -04:00
Seon Rozenblum
268b3f0dde
Added support for Unexpected Maker TinyPICO (V2/V3) and TinyPICO Nano boards using ESP32-PICO-D4
2022-09-18 09:49:30 +10:00
Paul Price
b2ffda219a
updated a pin definition
2022-09-17 16:53:24 -04:00
MicroDev
4a69dfa50c
Merge pull request #6907 from dhalbert/preserve-pins-on-deep-sleep
...
allow preserving pin state during deep sleep
2022-09-16 17:52:04 +05:30
Dan Halbert
4df8a51982
Remove unneeded workaround for Feather ESP32-S2 TFT
2022-09-15 20:06:47 -04:00
Dan Halbert
60f43b1703
allow preserving pin state during deep sleep
2022-09-15 17:35:14 -04:00
Wind-stormger
56c5f1eedf
Add BananaPi BPI-Leaf-S3.
...
Based on esp32s3, all available pins are drawn.
2M PSRAM, 8M FLASH.
A JST SH 4-pin Connector can be used for STEMMA QT / Qwiic.
A MX 1.25mm 2-Pin Connector Lithium battery power supply.
A WS2812 LED.
2022-09-15 14:18:24 +08:00
Dan Halbert
14fc4a0797
Merge pull request #6898 from dhalbert/espressif-pwmout-reset
...
Espressif pwmout reset fixes
2022-09-14 18:47:05 -04:00
Dan Halbert
ae64f9fd78
Merge pull request #6899 from BPI-STEAM/CircuitPython-main-BPI-BIT-S2-PR
...
Add BananaPi BPI-Bit-S2 .
2022-09-13 23:02:46 -04:00
Wind-stormger
6f4cc611ed
Add BananaPi BPI-Bit-S2 .
...
Adds support for the BananaPi BPI-Bit-S2 Boards.
Based on esp32s2 chip.
With 25 ws2812 LEDs, 1 buzzer, 2 photosensitive sensors, 1 thermosensitive sensor,
2 buttons on the front, 1 reset button and 1 boot button on the back.
2022-09-14 10:21:23 +08:00
Dan Halbert
14adfb16dd
avoid pwmout_reset() workaround by reordering in main(); remove unnecessary never-resets
2022-09-12 21:32:21 -04:00
Dan Halbert
d0d10179c2
fix logic in pwmout_reset()
2022-09-12 17:03:45 -04:00
Kong Wai Weng
c157f1cb39
Cast pin_number to int8_t so that it can be used with switch-case.
2022-09-12 18:56:15 +08:00
Kong Wai Weng
0ae015e4d9
Removed whitespaces.
2022-09-12 18:25:27 +08:00
Kong Wai Weng
aaa2be1200
Set the default pin state for GPIOs to pull down.
2022-09-12 18:19:33 +08:00
microDev
36221bd749
update board microdev_micro_c3
2022-09-11 13:31:38 +05:30
Kong Wai Weng
2fbb3090e2
Changed the pins assignment.
2022-09-09 16:50:14 +08:00
Dan Halbert
58b00467c4
Merge pull request #6878 from dhalbert/weak-board-defs
...
Use MP_WEAK for default board.c routines
2022-09-08 10:47:08 -04:00
Dan Halbert
4cb69a51d5
Use MP_WEAK for default board.c routines
2022-09-08 07:36:50 -04:00
Seon Rozenblum
6c4f352533
Fixed incorrect IO naming for ProS3 and FeatherS3
2022-09-07 19:51:45 +10:00
Dan Halbert
14498f793d
Merge pull request #6859 from wemos/s3_cpython
...
Add LOLIN S3 ESP32-S3 board.
2022-09-04 13:10:52 -04:00
bill88t
ca7fb6dede
removal of sda-scl and add "GP" to 40,41
2022-09-04 18:05:50 +03:00
bill88t
e1891038c8
Forgor the one IO pin and sda-scl
2022-09-04 16:59:56 +03:00
wemos
3a18d285a2
Add LOLIN S3 ESP32-S3 board.
2022-09-03 11:06:51 +08:00
Jeff Epler
8ed6a6135a
Disable camera on boards without psram
2022-08-26 09:27:50 -05:00
