Commit Graph

39 Commits

Author SHA1 Message Date
Damien George d80174d7c3 stmhal: Use polling, not DMA, for 1 byte SPI transfers.
There is an issue sending 1 byte on the SPI bus using DMA, but it only
occurs when the transmit is done for the first time after initialising
the SPI and DMA peripherals.  All other cases (sending 2 or more bytes,
doing send_recv, doing recv first) work okay.  We sidestep this issue by
using polling (not DMA) for all 1 byte transfers.  This is fine because
a 1 byte transfer can't be interrupted and doesn't need the benefits of
DMA (and using polling for this case is more efficient).

Resolves #1456.
2015-09-15 20:45:37 +01:00
Dave Hylands 8a1a5c236d stmhal: Fix hardfault when configured as a SPI slave 2015-08-05 23:42:05 +01:00
Dave Hylands 5e11d2b349 stmhal: Enable SPI support for F7 MCUs. 2015-08-05 23:38:49 +01:00
Damien George 0851751615 stmhal: Factor GPIO clock enable logic into mp_hal_gpio_clock_enable.
Extracted GPIO clock enable logic into mp_hal_gpio_clock_enable
and called from anyplace which might need to use GPIO functions
on ports other than A-D.

Thanks to Dave Hylands for the patch.
2015-08-03 00:14:48 +01:00
Dave Hylands 92d4b51ad5 stmhal: Add STM32F7DISC and associated changes. 2015-07-30 00:38:32 +01:00
blmorris c5175526dd stmhal/dma.c: Modify dma_init() to accept init struct as an argument
This removes hard-coded DMA init params from dma_init(), instead defining
these parameters in a DMA_InitTypeDef struct that gets passed as an
argument to dma_init()
This makes dma_init more generic so it can be used for I2S and SD Card,
which require different initialization parameters.
2015-06-24 17:48:52 +01:00
Damien George 3d30d605f5 stmhal: Factor out DMA initialisation code from spi.c.
This is so that the DMA can be shared by multiple peripherals.
2015-06-10 14:01:44 +01:00
Damien George 53a8aeb6e7 stmhal: Fix slow SPI DMA transfers by removing wfi from DMA wait loop.
Addresses issue #1268.
2015-06-03 23:20:23 +01:00
Damien George 17d9b5006d stmhal: Fix off-by-one error when checking for valid I2C and SPI bus. 2015-05-28 11:05:44 +01:00
Damien George 70446f46c2 stmhal: Allow to name SPI busses, and give them names for pyboard. 2015-05-27 17:21:42 +01:00
Damien George 7f9d1d6ab9 py: Overhaul and simplify printf/pfenv mechanism.
Previous to this patch the printing mechanism was a bit of a tangled
mess.  This patch attempts to consolidate printing into one interface.

All (non-debug) printing now uses the mp_print* family of functions,
mainly mp_printf.  All these functions take an mp_print_t structure as
their first argument, and this structure defines the printing backend
through the "print_strn" function of said structure.

Printing from the uPy core can reach the platform-defined print code via
two paths: either through mp_sys_stdout_obj (defined pert port) in
conjunction with mp_stream_write; or through the mp_plat_print structure
which uses the MP_PLAT_PRINT_STRN macro to define how string are printed
on the platform.  The former is only used when MICROPY_PY_IO is defined.

With this new scheme printing is generally more efficient (less layers
to go through, less arguments to pass), and, given an mp_print_t*
structure, one can call mp_print_str for efficiency instead of
mp_printf("%s", ...).  Code size is also reduced by around 200 bytes on
Thumb2 archs.
2015-04-16 14:30:16 +00:00
Damien George 05005f679e py: Remove mp_obj_str_builder and use vstr instead.
With this patch str/bytes construction is streamlined.  Always use a
vstr to build a str/bytes object.  If the size is known beforehand then
use vstr_init_len to allocate only required memory.  Otherwise use
vstr_init and the vstr will grow as needed.  Then use
mp_obj_new_str_from_vstr to create a str/bytes object using the vstr
memory.

Saves code ROM: 68 bytes on stmhal, 108 bytes on bare-arm, and 336 bytes
on unix x64.
2015-01-21 23:18:02 +00:00
Dave Hylands d7f199465f stmhal: Add support for FEZ Cerb40 II board from ghielectronics.com. 2015-01-21 00:11:04 +00:00
Damien George 2cf6dfa280 stmhal: Prefix includes with py/; remove need for -I../py. 2015-01-01 21:06:20 +00:00
Damien George b66a31c42c stmhal: Allow SPI.init to specify prescaler directly; improve SPI docs. 2014-12-08 21:34:07 +00:00
Damien George 9de6773237 stmhal: Make SPI bus use DMA for transfers.
Uses DMA if interrupts are enabled, polling if they are disabled.
2014-12-06 17:41:17 +00:00
Damien George 480a7ce58f stmhal: Change SPI phase spec to 0,1 to match standard conventions.
Was 1 or 2, now 0 or 1 (respectively).  0 means sample MISO on first
edge, 1 means sample on second edge.

Addresses issue #936.
2014-10-26 13:54:31 +00:00
Damien George 185cb0d943 stmhal: Use OSError with POSIX error code for HAL errors.
Addresses issue #921.
2014-10-23 14:25:32 +01:00
Damien George bfa7b480a7 stmhal: For spi_init, add argument to select if NSS pin is enabled.
Most of the time you don't use the NSS pin of the SPI bus, and so it
shouldn't be enabled by default (this gave some bugs in the past).
2014-09-30 22:36:47 +01:00
Damien George b766e79510 stmhal: Initial implementation of cc3k module and driver.
Pulled in and modified work done by mux/iabdalkader on cc3k driver, from
iabdalkader-cc3k-update branch.  That branch was terribly messy and had
too many conflicts to merge neatly.
2014-09-26 00:57:26 +01:00
Damien George ecc88e949c Change some parts of the core API to use mp_uint_t instead of uint/int.
Addressing issue #50, still some way to go yet.
2014-08-30 00:35:11 +01:00
Damien George 40f3c02682 Rename machine_(u)int_t to mp_(u)int_t.
See discussion in issue #50.
2014-07-03 13:25:24 +01:00
Emmanuel Blot f6932d6506 Prefix ARRAY_SIZE with micropython prefix MP_ 2014-06-19 18:54:34 +02:00
Damien George 5fc400ccdb stmhal: Document physical pins for SPI, I2C, UART busses. 2014-05-04 14:28:11 +01:00
Damien George 04b9147e15 Add license header to (almost) all files.
Blanket wide to all .c and .h files.  Some files originating from ST are
difficult to deal with (license wise) so it was left out of those.

Also merged modpyb.h, modos.h, modstm.h and modtime.h in stmhal/.
2014-05-03 23:27:38 +01:00
Damien George baa2afbb58 stmhal: Fix typos in class documentation. 2014-05-03 16:42:27 +01:00
Paul Sokolovsky 9b71b16a94 unix,stmhal: Make "mpconfig.h" be first included, as other headers depend on it. 2014-05-02 18:08:16 +03:00
Damien George 8d09640b22 stmhal: Add documentation in comments, and script to generate HTML.
Decided to write own script to pull documentation from comments in C code.
Style for writing auto generated documentation is: start line with ///
and then use standard markdown to write the comment.  Keywords
recognised by the scraper begin with backslash.  See code for examples.

Running: python gendoc.py modpyb.c accel.c adc.c dac.c extint.c i2c.c
led.c pin.c rng.c servo.c spi.c uart.c usrsw.c, will generate a HTML
structure in gendoc-out/.

gendoc.py is crude but functional.  Needed something quick, and this was
it.
2014-04-29 22:55:34 +01:00
Damien George dbc81df5d4 Simplify names for argcheck.c / arg parsing. 2014-04-26 11:19:17 +01:00
Damien George 6d3c5e4301 Add ARRAY_SIZE macro, and use it where possible. 2014-04-26 10:47:29 +01:00
Damien George 34f01c2ca1 stmhal: Add some documentation to I2C, SPI and USART modules. 2014-04-21 01:59:43 +01:00
Damien George 3771a097da stmhal: Improve USART class, to be more like SPI and I2C.
The three classes I2C, SPI and USART now have a fairly uniform (Python)
API.  All are constructed, initialised and deinitialised in the same
way.  They can have most of their parameters set, using keyword arguments.
All have send and recv (although slightly different with I2C requiring an
address in master mode).  recv can do inplace receiving (ie store the
data in a previously-created bytearray).

It's just polling mode at the moment, but interrupt and DMA would be
nice to add.
2014-04-21 01:14:14 +01:00
Damien George eb8bdf4df3 stmhal, SPI and I2C: Improvements to functionality and consistency. 2014-04-21 00:10:04 +01:00
Damien George ff91156d34 stmhal: Improved configurability for I2C and SPI busses.
The HAL handles for the I2C/SPI objects are rather large, so we don't
want to unnecessarily include them.
2014-04-20 19:06:15 +01:00
Dave Hylands f70630c58f Fix i2c and spi to compile for Netduino Plus 2 2014-04-20 00:06:03 -07:00
Damien George fd6925b4b9 stmhal: Small bug fixes and simplifications. 2014-04-20 01:25:58 +01:00
Damien George 0a6e9f562f stmhal: Update ExtInt to allow keyword arguments in constructor. 2014-04-20 00:38:50 +01:00
Damien George 57e415859a stmhal: Tidy up and improve consistency across modules. 2014-04-20 00:30:09 +01:00
Damien George d689430e79 stmhal: Add SPI class.
Also some updates to compile with latest changes to core py.
2014-04-20 00:16:30 +01:00