2b910b7292
Adding LED for D13/L pin name.
2021-03-16 12:14:40 -04:00
bc690d4070
Merge pull request #4415 from jepler/pre-commit-no-run-if-empty
...
pre-commit: code formatter fixes
2021-03-16 09:54:12 -05:00
0890b54cd9
More formatting
2021-03-16 08:29:04 -05:00
fb437d8280
Formatting fixes
2021-03-16 08:22:02 -05:00
3b01a65743
Fixed formatting
2021-03-16 08:14:49 -05:00
9de40f56f3
Add board config files
2021-03-15 22:08:19 -06:00
c9427780b3
Create pins.c
2021-03-15 22:07:24 -06:00
49baa94446
added sparkfun_thingplus_rp2040 to .github/workflows/boards.yml and renamed board folder to include chip
2021-03-15 23:00:24 -04:00
288415f867
Update ports/raspberrypi/boards/sparkfun_thingplus/mpconfigboard.h
...
Co-authored-by: Scott Shawcroft <scott@tannewt.org>
2021-03-15 21:07:31 -04:00
30a74b3d92
Update ports/raspberrypi/boards/sparkfun_thingplus/mpconfigboard.mk
...
Co-authored-by: Scott Shawcroft <scott@tannewt.org>
2021-03-15 21:07:24 -04:00
e326d7ca80
Merge branch 'main' into rp_dp_parallel
2021-03-15 20:00:13 -05:00
f7a988b9b3
Merge pull request #4405 from DavePutz/issue_4237
...
Issue 4237 - Changed initial setting in program_struct
2021-03-15 17:51:36 -07:00
9cb8ce67ed
Merge pull request #4412 from kamtom480/spi_and_i2c
...
spresense: minor changes for i2c, spi and uart
2021-03-15 17:35:06 -07:00
d3bf1fe15d
modifications by pre-commit
2021-03-15 18:11:00 -05:00
ed3f636be5
spresense: empty rx uart fifo after initialization
2021-03-15 16:14:16 +01:00
22ed0abf6c
spresens: configure pin mode for i2c and spi
2021-03-15 16:14:16 +01:00
0567d06936
added board configuration for Sparkfun ThingPlus RP2040
2021-03-15 10:27:21 -04:00
a52eb88031
run code formatting script
2021-03-15 19:27:36 +05:30
b33d77bfe8
disable bitmaptools on over-full board
2021-03-14 20:08:09 -05:00
9a83501982
Fixed initial settings for program_struct to allow more than 1 program per pio
2021-03-14 15:05:56 -05:00
8e425a9354
Merge pull request #4393 from tannewt/raise_default_flash_speed
...
Speed up a bit more
2021-03-13 12:50:29 -05:00
1b106de4e0
Merge pull request #4262 from DavePutz/issue_4111
...
Issue 4111 - Implement pulseio(pulsein) for RP2040
2021-03-12 16:48:57 -08:00
45487f14a0
Speed up a bit more
2021-03-12 16:00:16 -08:00
96ce43e6d6
Added the correct files
2021-03-12 16:18:33 -06:00
6628f49852
Use StateMachine.c interrupt setup and simplify SM program
2021-03-12 16:06:57 -06:00
a5c6759325
Merge pull request #4392 from tannewt/lower_default_flash_speed
...
Lower default flash speed.
2021-03-12 13:58:44 -06:00
aec03a409f
Lower default flash speed.
...
/ 6 leads to ~40mhz. 2M and 4M have a max 0x03 read speed of 60mhz.
If the divisor is / 4 then the speed is just over 60mhz.
Fixes #4377
2021-03-12 11:06:39 -08:00
0ce5b2f594
put back pullup setting
2021-03-12 08:20:09 -05:00
307d2a99fe
Fix after rebase
2021-03-11 20:06:50 -06:00
5689307798
Changed frequency to match PIO having 2 instructions
2021-03-11 19:32:44 -06:00
b02b1e9979
Set frequency default 60Mhz
2021-03-11 19:32:44 -06:00
1658fe04f9
Set the statemachine to never reset so REPL works
2021-03-11 19:32:44 -06:00
c384ebe5c0
Updated to initalize pindirs
2021-03-11 19:32:44 -06:00
7321411962
Added frequency to parallel display
2021-03-11 19:32:43 -06:00
56a219911f
Add frequency support to parallel bus
2021-03-11 19:32:43 -06:00
b080d6207b
Removing debug info and clean up
2021-03-11 19:32:43 -06:00
c6aaab6f64
Initial commit
2021-03-11 19:32:43 -06:00
c71b6cb699
move to esp-idf PR merge
2021-03-11 20:05:31 -05:00
f75a009ed4
fix unnecessary statement order change
2021-03-11 15:16:32 -05:00
b5d2cc6f46
Merge remote-tracking branch 'adafruit/main' into esp32s2-i2c-bug
2021-03-11 15:09:18 -05:00
24f4d981bd
Merge pull request #4380 from jepler/rp2040-audiomp3
...
raspberrypi: Enable mp3 playback
2021-03-11 12:53:46 -06:00
0e451a1681
Merge pull request #4383 from hierophect/stm32-uart-dereserve
...
STM32: Fix UART deinit
2021-03-11 10:48:01 -08:00
40886d198d
Merge pull request #4385 from hierophect/stm32-f407-can
...
STM32: add all F405 modules to F407
2021-03-11 10:45:08 -08:00
de88fa37fb
Merge remote-tracking branch 'adafruit/main' into esp32s2-i2c-bug
2021-03-11 12:27:29 -05:00
061d5910cb
use fixed esp-idf
2021-03-11 12:09:01 -05:00
18668f6e28
spresense: fix spi to work with only one data pin
2021-03-11 18:06:49 +01:00
76d0870fba
spresense: return error as positive value for i2c
2021-03-11 18:04:01 +01:00
0b73c7a212
Update F407 to match F405
2021-03-11 11:27:17 -05:00
1ebbd14d0f
Fix UART deinit
2021-03-11 11:02:13 -05:00
15e97f12a1
Merge pull request #4379 from jepler/rp2040-rtc
...
raspberrypi: RTC: Ensure a time is set
2021-03-11 09:00:31 -06:00
08c5dbb003
use return values in STM PWMOut constructor, not exceptions
2021-03-11 08:52:47 -05:00
16bfe3b41c
raspberrypi: RTC: Ensure a time is set
...
Until a time is set, the RTC is not running, and rtc_get_datetime()
returns false without assigning to the out-parameter.
In CircuitPython, this would manifest as arbitrary values being returned,
since uninitialized storage on the stack was being converted into a timestamp.
2021-03-10 20:20:40 -06:00
f0965b1ef7
Merge pull request #4350 from nitz/board-add-sparkfun-micromod-nrf52840
...
Add new nRF port for SF MicroMod nRF52840.
2021-03-10 18:13:11 -08:00
c95def0b32
raspberrypi: Enable mp3 playback
...
The rp2040 is _very_ marginal for mp3 playback, and currently sometimes triggers a bug that gives garbled audio output. However, it does work for some limited situations.
2021-03-10 18:44:10 -06:00
58fb011070
clean up
2021-03-10 19:03:27 +07:00
d1c6bb0927
rp2040 add double reset to uf2, also update pico-sdk to 1.1.0
2021-03-10 18:58:23 +07:00
a3c3e8a0fa
fix trailing whitespace
2021-03-09 22:41:08 -06:00
d5365cb066
SDIO/QSPI pin names. ¯\_(ツ)_/¯
2021-03-09 18:36:29 -05:00
5beb529f61
Update pins, remove unused defs from board config.
2021-03-09 17:43:13 -05:00
fe0655e121
Update pins, remove unused defs from board config.
2021-03-09 17:39:50 -05:00
0c58cc4772
Moved pin wait to an initial exec
2021-03-09 16:37:29 -06:00
1ae858126a
Fix the mpconfigboard.mk that was screwy?
2021-03-09 17:29:10 -05:00
d650849581
Merge pull request #4348 from FBSeletronica/franzininhoWIFI_wrover
...
Franzininho wifi ESP32-S2 Wrover
2021-03-09 13:07:19 -08:00
2c3002b327
Merge pull request #4370 from jposada202020/i2cperipheral_ctrlc
...
I2CPeripheral samd51 corrections in the CTRLC bit
2021-03-09 12:58:59 -08:00
a61db7f12e
Updated SparkFun MicroMod USB PID
...
As per the PID provide by TheHoff, [here](https://forum.sparkfun.com/viewtopic.php?p=223812#p223812 )
2021-03-09 12:54:52 -05:00
f0e3274a33
Update to agree with modified StateMachine.h
2021-03-09 11:13:09 -06:00
c6eb3f98be
Fixing build.yml
2021-03-09 13:55:20 -03:00
be90fa80e8
Initial Changes
2021-03-09 10:48:33 -05:00
6f4510d7aa
Merge branch 'main' into issue_4111
2021-03-08 23:28:21 -06:00
576da73a17
Added check for maxlen
2021-03-08 23:23:51 -06:00
95b7a59156
Merge branch 'issue_4111' of https://github.com/DavePutz/circuitpython into issue_4111
2021-03-08 23:22:05 -06:00
3db0fec267
Added check for maxlen
2021-03-08 23:20:57 -06:00
88650bc4d0
Removed leftover debug code
2021-03-08 22:48:57 -06:00
7029783985
funhouse board
2021-03-08 21:24:28 -05:00
775f1b9e0d
Merge pull request #4329 from jepler/rp2-rotaryio
...
raspberrypi: Implement rotaryio, improve StateMachine
2021-03-08 17:49:45 -08:00
4fc6c7d8c9
Merge pull request #4347 from FBSeletronica/franzininhoWIFI
...
Adding Circuitpython port for Franzininho WIFI board with the ESP32-S2 wroom module
2021-03-08 15:37:42 -08:00
27703f3156
fix quote error
2021-03-08 10:32:37 -03:00
fe29780afb
updating USB_VID and USB_PID for Espressif modules
2021-03-08 08:51:48 -03:00
2771e7fe75
Updating USB vendor ID and producfor Espressif modules
2021-03-08 08:47:33 -03:00
cdb0fda72a
Merge remote-tracking branch 'origin/main' into count-flash-devices
2021-03-07 20:26:04 -06:00
26eb429cc6
restore install/delete for i2c driver
2021-03-07 18:23:14 -05:00
f1ada8e880
Automatically count EXTERNAL_FLASH_DEVICES
2021-03-07 11:48:39 -06:00
a23129bc49
add GD25Q16C flash to BlackPill
2021-03-07 17:23:39 +00:00
a4133c4545
Merge pull request #4344 from jepler/vm-size-optimizations
...
Vm size optimizations: Get back 1500 bytes for 3.2% VM speed decrease
2021-03-07 10:09:51 -06:00
3b76299f39
Add new nRF port for SF MicroMod nRF52840.
2021-03-07 01:06:50 -05:00
17aa9ae3f6
Update vendor ID for Espressif ESP32S2 Modules
2021-03-06 18:43:34 -03:00
4a50f1dd6f
Update Vendor ID for Espressif
2021-03-06 18:36:53 -03:00
48e727f7d6
adding port for Franzininho WIFI board ESP32S2 w/Wrover
2021-03-06 17:47:27 -03:00
6cf9c5158c
adding port for Franzininho WIFI board
2021-03-06 17:15:54 -03:00
4f040af481
vm: Make the speed-size trade-off compile time settable
...
.. and enable for all samd21 boards
2021-03-05 18:29:27 -06:00
67fb3054b4
Merge pull request #4342 from jamesbowman/main
...
Enable EVE low-level for Teensy 4.0 and 4.1
2021-03-05 17:25:00 -06:00
d2056a46ee
Merge pull request #4335 from tyomitch/main
...
[nrf] No need to store `buffer_length` as part of `audiopwmio_pwmaudioout_obj_t`
2021-03-05 15:54:10 -06:00
bed96a98d2
Merge pull request #4337 from tyomitch/patch-1
...
[stm] `curr_pulseout` can be `STATIC`
2021-03-05 15:53:31 -06:00
bff585ffd2
Enable EVE low-level for Teensy 4.0 and 4.1
2021-03-05 11:32:58 -08:00
cd1f19020f
raspberrypi: move landmine Makefile comments
2021-03-05 12:59:55 -06:00
2ae1e7de61
WIPrp2040: Implement IncrementalEncoder
...
Any two consecutive pins can be used for an IncrementalEncoder
Testing performed: Put a synthesized (few hundred counts per second) quadrature signal into GP2/3 and read the encoder out. Performed filesystem operations at the same time to stress test it.
The reasons for not using common_hal_rp2pio_statemachine_readinto are commented on.
2021-03-05 10:31:29 -06:00
4cf6579e22
remove general changes; not consistent across builds
2021-03-05 10:10:50 -05:00
e0b96c0f43
[nrf] No need to store `buffer_length` as part of `audiopwmio_pwmaudioout_obj_t`
2021-03-05 06:01:58 -05:00
4720dc179a
[stm] `curr_pulseout` can be `STATIC`
...
Not used outside of PulseOut.c
2021-03-05 12:52:13 +02:00
c97721455a
Shrink the smallest builds with compile options
2021-03-04 23:07:06 -05:00
a4dda3a5ba
Merge branch 'main' into issue_4111
2021-03-04 14:38:00 -06:00
c5c297d2c0
Update PulseOut.c
2021-03-04 13:53:19 -06:00
b7f03f9487
Update PulseOut.h
2021-03-04 13:52:40 -06:00
2d941b070f
Changed interrupt to per-word basis; cleaned up other small items
2021-03-04 13:51:46 -06:00
bc14ed31f6
StateMachine.h: Add header for declaration of mcu_pin_obj_t typedef
2021-03-04 12:28:46 -06:00
c023ec03ff
PDMIn: Add missing deinit call
2021-03-04 12:28:06 -06:00
bd01d31542
rp2pio: Add pins_are_sequential
...
This can be used where the standard API calls for a list of pins, to check that they satisfy the requirements of the rp2pio state machine, e.g.,
```python
def __init__(self, pin_a, pin_b):
if not rp2pio.pins_are_sequential([pin_a, pin_b]):
raise ValueError("Pins must be sequential")
```
2021-03-04 11:26:33 -06:00
ff62b0d2c0
StateMachine: Add pull up/down for inputs
2021-03-04 11:26:29 -06:00
68ac14b309
StateMachine: Add in_available property
...
I named the property `in_available` because it is similar to pyserial.
However, it indicates the number of words in the fifo, not the number
of bytes.
2021-03-04 11:14:09 -06:00
2ae8a44b2a
Merge pull request #4325 from microDev1/fix-wdt
...
ESP32S2: Fix watchdog deinit
2021-03-04 11:04:01 -05:00
6f99026a64
rp2040 use normal usb_irq_handler()
2021-03-04 21:29:04 +07:00
13453d35c6
fix watchdog deinit
2021-03-04 13:23:34 +05:30
71c43ca2dd
Merge pull request #4319 from jepler/feather-default-uart
...
feather rp2040: enable default board.UART
2021-03-03 16:46:00 -05:00
b0fca4fcda
feather rp2040: enable default board.UART
2021-03-03 13:13:06 -06:00
cd48c5ee83
Merge pull request #4315 from dhalbert/rp2040-i2c-short-writes
...
RP2040: Implement short I2C writes (2 bytes or less) using bitbangio
2021-03-03 12:42:47 -05:00
88353f2f5b
Update mpconfigport.mk
2021-03-03 11:00:58 -06:00
ced707ed32
Update call to rp2pio_statemachine_construct
2021-03-03 10:55:08 -06:00
514b73bcf8
Merge pull request #4254 from gamblor21/rp2040_countio
...
Rp2040 countio
2021-03-03 08:47:24 -08:00
1d8933dd05
Merge pull request #4265 from DavePutz/pio_soft_reset
...
Clear out PIOs and State Machines on RP2040 soft reset
2021-03-03 08:43:57 -08:00
fb7a0f7efc
add 1sec timeouts for I2C read and write
2021-03-03 09:43:57 -05:00
98075c5255
Fixed merge
2021-03-02 22:32:59 -06:00
e3ab394cd6
works on nearly all sensors
2021-03-02 23:27:37 -05:00
4167778bbc
Merge pull request #4312 from jepler/feather-rp2040-led
...
feather rp2040: add board.LED
2021-03-02 23:19:14 -05:00
9b96bae668
Update mpconfigport.mk
2021-03-02 21:36:00 -06:00
30d491e136
Update mpconfigport.mk
2021-03-02 21:30:49 -06:00
58fb7b9b32
Update mpconfigport.mk to get builds working
2021-03-02 21:27:46 -06:00
6046d37f31
Update PulseIn.c
2021-03-02 21:23:45 -06:00
37ee18349f
Merge branch 'main' into rp2040_countio
2021-03-02 19:47:53 -06:00
4246cc3f6d
Counter and PWMOut slice conflict check
2021-03-02 19:32:06 -06:00
b27afad9cb
move LED to the right spot in the file
2021-03-02 19:02:38 -06:00
efc2667b5f
Merge pull request #4186 from jepler/update-protomatter-rp2
...
Enable protomatter on RP2040 builds
2021-03-02 19:01:37 -06:00
15615effc2
Merge pull request #4276 from bergdahl/patch-1
...
Update StateMachine.c
2021-03-02 17:11:45 -05:00
0a58d451ad
Merge pull request #4306 from Neradoc/fix-reset-to-safe
...
press reset to safe mode on ports where reset reason is not implemented
2021-03-02 15:44:52 -05:00
f31b472309
Merge remote-tracking branch 'adafruit/main' into rp2040-i2c-short-writes
2021-03-02 15:17:12 -05:00
9939c59caa
wip
2021-03-02 15:16:55 -05:00
8bfd308d37
feather rp2040: add board.LED
2021-03-02 13:16:09 -06:00
e4f0e47d9f
Merge pull request #4233 from pewpew-game/displayio-group-list
...
displayio: make Group use a python list internally
2021-03-02 09:59:58 -08:00
ce70b95990
Merge pull request #4177 from microDev1/nvm-rp
...
RP2040: Support for NVM
2021-03-02 09:57:36 -08:00
248acd07c8
shrink builds
2021-03-02 12:25:42 -05:00
f41fb6fafc
Apply suggestions from code review
...
copyediting
2021-03-02 12:01:50 -05:00
9f6ebf3012
Merge pull request #4310 from kamtom480/spresense_analogin
...
spresense: return valid reference voltage
2021-03-02 11:55:42 -05:00
2651e15a52
Merge pull request #4309 from jepler/rp2040-interrupt-pio
...
rp2pio: allow keyboard interrupt while waiting for tx fifo to empty (& stall)
2021-03-02 08:55:27 -08:00
722a7150ca
Merge pull request #4308 from jepler/rp2040-build-boot2
...
raspberrypi: allow directly specifying the original boot .S file
2021-03-02 08:54:30 -08:00
f560b5f3a3
raspberry: switch pico back to the boot2 for W25Q16
...
Presumably, switching it to generic hurt performance a bit.
I verified that the build-raspberry_pi_pico/boot2_padded_checksummed.S
built file has the same checksum as the old
bs2_default_padded_checksummed.S
2021-03-02 08:08:41 -06:00
7c921b808b
spresense: Define LONGINT_IMPL as MPZ
2021-03-02 14:25:22 +01:00
f9d21637a3
spresense: return valid reference voltage
2021-03-02 14:25:22 +01:00
cb2cf81136
ugame10 - disable pulseio to make more room for the French
2021-03-02 11:11:55 +01:00
b029031286
minor structural modification
2021-03-02 14:36:28 +05:30
54d11a8e2d
Merge pull request #4299 from jamesbowman/main
...
Add EVE support for Feather M4 Express
2021-03-01 22:56:50 -05:00
5a00862b1d
raspberrypi: allow directly specifying the original boot .S file
...
.. all the necessary steps to transform it into a padded, checksummed
file are now done by the build system.
Since it is assigned by "?=", it _should_ be the case that individual
builds can override it.
I did not "test" this per se, but it gives the same content and checksum
(except for the identifying comment with a path) as #4302 .
2021-03-01 21:08:19 -06:00
Kattni Rembor
Jeff Epler
gamblor21
spe2
mintakka
Mark
Scott Shawcroft
Jeff Epler
Kamil Tomaszewski
microDev
root
Dan Halbert
Scott Shawcroft
DavePutz
Dan Halbert
Lucian Copeland
hathach
nitz
FBSeletronica
jposada202020
Jeff Epler
jerryneedell
James Bowman
Artyom Skrobov
Radomir Dopieralski