circuitpython/ports/atmel-samd/mpconfigport.h

257 lines
8.7 KiB
C
Raw Normal View History

2019-02-15 00:28:20 -05:00
/*
* This file is part of the MicroPython project, http://micropython.org/
*
* The MIT License (MIT)
*
* Copyright (c) 2019 Dan Halbert for Adafruit Industries
*
* Permission is hereby granted, free of charge, to any person obtaining a copy
* of this software and associated documentation files (the "Software"), to deal
* in the Software without restriction, including without limitation the rights
* to use, copy, modify, merge, publish, distribute, sublicense, and/or sell
* copies of the Software, and to permit persons to whom the Software is
* furnished to do so, subject to the following conditions:
*
* The above copyright notice and this permission notice shall be included in
* all copies or substantial portions of the Software.
*
* THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
* IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
* FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE
* AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
* LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM,
* OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN
* THE SOFTWARE.
*/
#ifndef __INCLUDED_MPCONFIGPORT_H
#define __INCLUDED_MPCONFIGPORT_H
2019-02-15 00:28:20 -05:00
// Definitions for which SAMD chip we're using.
#include "include/sam.h"
2019-12-10 22:39:44 -05:00
// Definitions that control circuitpy_mpconfig.h:
2019-12-06 15:18:20 -05:00
////////////////////////////////////////////////////////////////////////////////////////////////////
2019-12-10 22:39:44 -05:00
#ifdef SAMD21
2019-10-20 23:50:12 -04:00
// HMCRAMC0_SIZE is defined in the ASF4 include files for each SAMD21 chip.
#define RAM_SIZE HMCRAMC0_SIZE
#define BOOTLOADER_SIZE (8*1024)
#define CIRCUITPY_MCU_FAMILY samd21
#define MICROPY_PY_SYS_PLATFORM "Atmel SAMD21"
#define SPI_FLASH_MAX_BAUDRATE 8000000
#define MICROPY_PY_BUILTINS_NOTIMPLEMENTED (0)
#define MICROPY_PY_FUNCTION_ATTRS (0)
// MICROPY_PY_UJSON depends on MICROPY_PY_IO
#define MICROPY_PY_IO (0)
#define MICROPY_PY_REVERSE_SPECIAL_METHODS (0)
2020-11-01 14:52:03 -05:00
#define MICROPY_PY_UBINASCII (0)
#define MICROPY_PY_UJSON (0)
2020-10-14 21:14:55 -04:00
#define MICROPY_PY_COLLECTIONS_ORDEREDDICT (0)
#define MICROPY_PY_UERRNO_LIST \
X(EPERM) \
X(ENOENT) \
X(EIO) \
X(EAGAIN) \
X(ENOMEM) \
X(EACCES) \
X(EEXIST) \
X(ENODEV) \
X(EISDIR) \
X(EINVAL) \
2019-10-20 23:50:12 -04:00
#endif // SAMD21
2019-12-06 15:18:20 -05:00
////////////////////////////////////////////////////////////////////////////////////////////////////
#ifdef SAM_D5X_E5X
2019-10-20 23:50:12 -04:00
// HSRAM_SIZE is defined in the ASF4 include files for each SAM_D5X_E5X chip.
2019-10-20 23:50:12 -04:00
#define RAM_SIZE HSRAM_SIZE
#define BOOTLOADER_SIZE (16*1024)
#define CIRCUITPY_MCU_FAMILY samd51
#ifdef SAMD51
#define MICROPY_PY_SYS_PLATFORM "MicroChip SAMD51"
#elif defined(SAME54)
#define MICROPY_PY_SYS_PLATFORM "MicroChip SAME54"
#ifndef MICROCONTROLLER_VOLTAGE_DISABLE
#define MICROCONTROLLER_VOLTAGE_DISABLE (1)
#endif
#endif
#define SPI_FLASH_MAX_BAUDRATE 24000000
#define MICROPY_PY_BUILTINS_NOTIMPLEMENTED (1)
#define MICROPY_PY_FUNCTION_ATTRS (1)
2019-12-06 15:18:20 -05:00
// MICROPY_PY_UJSON depends on MICROPY_PY_IO
#define MICROPY_PY_IO (1)
#define MICROPY_PY_UJSON (1)
// MICROPY_PY_UERRNO_LIST - Use the default
2019-10-20 23:50:12 -04:00
#endif // SAM_D5X_E5X
2019-12-06 15:18:20 -05:00
////////////////////////////////////////////////////////////////////////////////////////////////////
// This also includes mpconfigboard.h.
#include "py/circuitpy_mpconfig.h"
2019-12-10 22:39:44 -05:00
// Definitions that can be overridden by mpconfigboard.h:
////////////////////////////////////////////////////////////////////////////////////////////////////
#ifdef SAMD21
#if INTERNAL_FLASH_FILESYSTEM
#define CIRCUITPY_INTERNAL_FLASH_FILESYSTEM_SIZE (64*1024)
#else
#define CIRCUITPY_INTERNAL_FLASH_FILESYSTEM_SIZE (0)
#endif
#ifndef CIRCUITPY_INTERNAL_NVM_SIZE
#define CIRCUITPY_INTERNAL_NVM_SIZE (256)
#endif
2019-12-16 17:17:13 -05:00
#ifndef CIRCUITPY_DEFAULT_STACK_SIZE
#define CIRCUITPY_DEFAULT_STACK_SIZE 3584
2019-12-16 17:17:13 -05:00
#endif
#ifndef SAMD21_BOD33_LEVEL
// Set brownout detection to ~2.7V. Default from factory is 1.7V,
// which is too low for proper operation of external SPI flash chips
// (they are 2.7-3.6V).
#define SAMD21_BOD33_LEVEL (39)
// 2.77V with hysteresis off. Table 37.20 in datasheet.
#endif
// Smallest unit of flash that can be erased.
#define FLASH_ERASE_SIZE NVMCTRL_ROW_SIZE
2019-12-10 22:39:44 -05:00
#endif // SAMD21
////////////////////////////////////////////////////////////////////////////////////////////////////
#ifdef SAM_D5X_E5X
2019-12-10 22:39:44 -05:00
#ifndef CIRCUITPY_INTERNAL_NVM_SIZE
#define CIRCUITPY_INTERNAL_NVM_SIZE (8192)
#endif
2019-12-16 17:17:13 -05:00
#ifndef CIRCUITPY_DEFAULT_STACK_SIZE
#define CIRCUITPY_DEFAULT_STACK_SIZE (24*1024)
#endif
#ifndef SAMD5x_E5x_BOD33_LEVEL
// Set brownout detection to ~2.7V. Default from factory is 1.7V,
// which is too low for proper operation of external SPI flash chips
// (they are 2.7-3.6V).
#define SAMD5x_E5x_BOD33_LEVEL (200)
// 2.7V: 1.5V + LEVEL * 6mV.
#endif
// Smallest unit of flash that can be erased.
#define FLASH_ERASE_SIZE NVMCTRL_BLOCK_SIZE
2019-12-10 22:39:44 -05:00
// If CIRCUITPY is internal, use half of flash for it.
#if INTERNAL_FLASH_FILESYSTEM
#ifndef CIRCUITPY_INTERNAL_FLASH_FILESYSTEM_SIZE
#define CIRCUITPY_INTERNAL_FLASH_FILESYSTEM_SIZE (FLASH_SIZE/2)
#endif
#else
#define CIRCUITPY_INTERNAL_FLASH_FILESYSTEM_SIZE (0)
#endif
#endif // SAM_D5X_E5X
2019-12-10 22:39:44 -05:00
////////////////////////////////////////////////////////////////////////////////////////////////////
2019-12-06 15:18:20 -05:00
#ifndef CALIBRATE_CRYSTALLESS
#define CALIBRATE_CRYSTALLESS (0)
#endif
#ifndef BOARD_HAS_CRYSTAL
#define BOARD_HAS_CRYSTAL (0)
#endif
// if CALIBRATE_CRYSTALLESS is requested, make room for storing
// calibration data generated from external USB.
#ifndef CIRCUITPY_INTERNAL_CONFIG_SIZE
#if CALIBRATE_CRYSTALLESS
#define CIRCUITPY_INTERNAL_CONFIG_SIZE (NVMCTRL_ROW_SIZE) // 256
#else
#define CIRCUITPY_INTERNAL_CONFIG_SIZE (0)
#endif
#endif
2019-10-28 18:15:02 -04:00
// Flash layout, starting at 0x00000000
//
// - bootloader (8 or 16kB)
// - firmware
// - internal CIRCUITPY flash filesystem (optional)
// - internal config, used to store crystalless clock calibration info (optional)
// - microntroller.nvm (optional)
2019-10-28 18:15:02 -04:00
2019-12-05 22:45:53 -05:00
// Define these regions starting up from the bottom of flash:
2019-10-28 18:15:02 -04:00
2019-12-05 22:45:53 -05:00
#define BOOTLOADER_START_ADDR (0x00000000)
#define CIRCUITPY_FIRMWARE_START_ADDR (BOOTLOADER_START_ADDR + BOOTLOADER_SIZE)
// Define these regions start down from the top of flash:
2019-10-28 18:15:02 -04:00
2019-12-05 22:45:53 -05:00
#define CIRCUITPY_INTERNAL_NVM_START_ADDR \
2019-12-10 17:57:17 -05:00
(FLASH_SIZE - CIRCUITPY_INTERNAL_NVM_SIZE)
2019-12-05 22:45:53 -05:00
#define CIRCUITPY_INTERNAL_CONFIG_START_ADDR \
(CIRCUITPY_INTERNAL_NVM_START_ADDR - CIRCUITPY_INTERNAL_CONFIG_SIZE)
2019-12-10 17:57:17 -05:00
#define CIRCUITPY_INTERNAL_FLASH_FILESYSTEM_START_ADDR \
(CIRCUITPY_INTERNAL_CONFIG_START_ADDR - CIRCUITPY_INTERNAL_FLASH_FILESYSTEM_SIZE)
2019-12-05 22:45:53 -05:00
// The firmware space is the space left over between the fixed lower and upper regions.
#define CIRCUITPY_FIRMWARE_SIZE \
2019-12-10 17:57:17 -05:00
(CIRCUITPY_INTERNAL_FLASH_FILESYSTEM_START_ADDR - CIRCUITPY_FIRMWARE_START_ADDR)
#if BOOTLOADER_START_ADDR % FLASH_PAGE_SIZE != 0
#error BOOTLOADER_START_ADDR must be on a flash page boundary.
#endif
#if CIRCUITPY_INTERNAL_NVM_START_ADDR % FLASH_ERASE_SIZE != 0
#error CIRCUITPY_INTERNAL_NVM_START_ADDR must be on a flash erase (row or block) boundary.
2019-12-10 17:57:17 -05:00
#endif
#if CIRCUITPY_INTERNAL_NVM_SIZE % FLASH_ERASE_SIZE != 0
#error CIRCUITPY_INTERNAL_NVM_SIZE must be a multiple of FLASH_ERASE_SIZE.
2019-12-10 17:57:17 -05:00
#endif
#if CIRCUITPY_INTERNAL_CONFIG_START_ADDR % FLASH_ERASE_SIZE != 0
#error CIRCUITPY_INTERNAL_CONFIG_SIZE must be on a flash erase (row or block) boundary.
2019-12-10 17:57:17 -05:00
#endif
#if CIRCUITPY_INTERNAL_CONFIG_SIZE % FLASH_ERASE_SIZE != 0
#error CIRCUITPY_INTERNAL_CONFIG_SIZE must be a multiple of FLASH_ERASE_SIZE.
2019-12-10 17:57:17 -05:00
#endif
#if CIRCUITPY_INTERNAL_FLASH_FILESYSTEM_START_ADDR % FLASH_ERASE_SIZE != 0
#error CIRCUITPY_INTERNAL_FLASH_FILESYSTEM_SIZE must be on a flash erase (row or block) boundary.
2019-12-10 17:57:17 -05:00
#endif
#if CIRCUITPY_INTERNAL_FLASH_FILESYSTEM_SIZE % FLASH_ERASE_SIZE != 0
#error CIRCUITPY_INTERNAL_FLASH_FILESYSTEM_SIZE must be a multiple of FLASH_ERASE_SIZE.
2019-12-10 17:57:17 -05:00
#endif
2019-12-05 22:45:53 -05:00
#if CIRCUITPY_FIRMWARE_SIZE < 0
#error No space left in flash for firmware after specifying other regions!
#endif
2019-10-28 18:15:02 -04:00
2019-02-15 00:28:20 -05:00
// Turning off audioio, audiobusio, and touchio as necessary
// due to limitations of chips is handled in mpconfigboard.mk
#include "peripherals/samd/dma.h"
#define MICROPY_PORT_ROOT_POINTERS \
2019-02-15 00:28:20 -05:00
CIRCUITPY_COMMON_ROOT_POINTERS \
mp_obj_t playing_audio[AUDIO_DMA_CHANNEL_COUNT];
#ifndef MICROCONTROLLER_VOLTAGE_DISABLE
#define MICROCONTROLLER_VOLTAGE_DISABLE (0)
#endif
#endif // __INCLUDED_MPCONFIGPORT_H