circuitpython/stmhal/main.c

561 lines
15 KiB
C
Raw Normal View History

/*
* This file is part of the Micro Python project, http://micropython.org/
*
* The MIT License (MIT)
*
* Copyright (c) 2013, 2014 Damien P. George
*
* Permission is hereby granted, free of charge, to any person obtaining a copy
* of this software and associated documentation files (the "Software"), to deal
* in the Software without restriction, including without limitation the rights
* to use, copy, modify, merge, publish, distribute, sublicense, and/or sell
* copies of the Software, and to permit persons to whom the Software is
* furnished to do so, subject to the following conditions:
*
* The above copyright notice and this permission notice shall be included in
* all copies or substantial portions of the Software.
*
* THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
* IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
* FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE
* AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
* LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM,
* OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN
* THE SOFTWARE.
*/
#include <stdio.h>
#include <string.h>
#include "stm32f4xx_hal.h"
#include "misc.h"
2014-03-12 21:06:26 -04:00
#include "systick.h"
#include "pendsv.h"
#include "mpconfig.h"
#include "qstr.h"
#include "misc.h"
#include "nlr.h"
#include "lexer.h"
#include "parse.h"
#include "obj.h"
#include "runtime.h"
#include "gc.h"
#include "gccollect.h"
#include "pybstdio.h"
#include "readline.h"
#include "pyexec.h"
#include "i2c.h"
#include "spi.h"
#include "uart.h"
#include "timer.h"
#include "led.h"
#include "pin.h"
#include "extint.h"
#include "usrsw.h"
#include "usb.h"
2014-03-15 08:54:48 -04:00
#include "rtc.h"
#include "storage.h"
#include "sdcard.h"
2014-03-12 21:06:26 -04:00
#include "ff.h"
#include "rng.h"
#include "accel.h"
#include "servo.h"
2014-03-24 11:15:33 -04:00
#include "dac.h"
#include "pybwlan.h"
2014-03-12 21:06:26 -04:00
void SystemClock_Config(void);
int errno;
static FATFS fatfs0;
#if MICROPY_HW_HAS_SDCARD
static FATFS fatfs1;
#endif
void flash_error(int n) {
for (int i = 0; i < n; i++) {
led_state(PYB_LED_R1, 1);
led_state(PYB_LED_R2, 0);
HAL_Delay(250);
led_state(PYB_LED_R1, 0);
led_state(PYB_LED_R2, 1);
HAL_Delay(250);
}
led_state(PYB_LED_R2, 0);
}
void __fatal_error(const char *msg) {
for (volatile uint delay = 0; delay < 10000000; delay++) {
}
led_state(1, 1);
led_state(2, 1);
led_state(3, 1);
led_state(4, 1);
stdout_tx_strn("\nFATAL ERROR:\n", 14);
stdout_tx_strn(msg, strlen(msg));
for (uint i = 0;;) {
led_toggle(((i++) & 3) + 1);
for (volatile uint delay = 0; delay < 10000000; delay++) {
}
if (i >= 16) {
// to conserve power
__WFI();
}
}
}
void nlr_jump_fail(void *val) {
printf("FATAL: uncaught exception %p\n", val);
__fatal_error("");
}
2014-06-14 09:53:11 -04:00
#ifndef NDEBUG
2014-06-14 11:02:50 -04:00
void __attribute__((weak))
__assert_func(const char *file, int line, const char *func, const char *expr) {
2014-06-14 08:41:11 -04:00
(void)func;
printf("Assertion '%s' failed, at file %s:%d\n", expr, file, line);
__fatal_error("");
}
2014-06-14 09:53:11 -04:00
#endif
2014-06-14 08:41:11 -04:00
STATIC mp_obj_t pyb_config_source_dir = MP_OBJ_NULL;
STATIC mp_obj_t pyb_config_main = MP_OBJ_NULL;
STATIC mp_obj_t pyb_config_usb_mode = MP_OBJ_NULL;
STATIC mp_obj_t pyb_source_dir(mp_obj_t source_dir) {
if (MP_OBJ_IS_STR(source_dir)) {
pyb_config_source_dir = source_dir;
}
return mp_const_none;
}
MP_DEFINE_CONST_FUN_OBJ_1(pyb_source_dir_obj, pyb_source_dir);
STATIC mp_obj_t pyb_main(mp_obj_t main) {
if (MP_OBJ_IS_STR(main)) {
pyb_config_main = main;
}
return mp_const_none;
}
MP_DEFINE_CONST_FUN_OBJ_1(pyb_main_obj, pyb_main);
STATIC mp_obj_t pyb_usb_mode(mp_obj_t usb_mode) {
if (MP_OBJ_IS_STR(usb_mode)) {
pyb_config_usb_mode = usb_mode;
}
return mp_const_none;
}
MP_DEFINE_CONST_FUN_OBJ_1(pyb_usb_mode_obj, pyb_usb_mode);
static const char fresh_boot_py[] =
"# boot.py -- run on boot-up\n"
"# can run arbitrary Python, but best to keep it minimal\n"
"\n"
"import pyb\n"
"#pyb.main('main.py') # main script to run after this one\n"
"#pyb.usb_mode('CDC+MSC') # act as a serial and a storage device\n"
"#pyb.usb_mode('CDC+HID') # act as a serial device and a mouse\n"
;
static const char fresh_main_py[] =
"# main.py -- put your code here!\n"
;
static const char fresh_pybcdc_inf[] =
#include "genhdr/pybcdc_inf.h"
;
static const char fresh_readme_txt[] =
"This is a Micro Python board\r\n"
"\r\n"
"You can get started right away by writing your Python code in 'main.py'.\r\n"
"\r\n"
"For a serial prompt:\r\n"
" - Windows: you need to go to 'Device manager', right click on the unknown device,\r\n"
" then update the driver software, using the 'pybcdc.inf' file found on this drive.\r\n"
" Then use a terminal program like Hyperterminal or putty.\r\n"
" - Mac OS X: use the command: screen /dev/tty.usbmodem*\r\n"
" - Linux: use the command: screen /dev/ttyACM0\r\n"
"\r\n"
"Please visit http://micropython.org/help/ for further help.\r\n"
;
int main(void) {
// TODO disable JTAG
/* STM32F4xx HAL library initialization:
- Configure the Flash prefetch, instruction and Data caches
- Configure the Systick to generate an interrupt each 1 msec
- Set NVIC Group Priority to 4
- Global MSP (MCU Support Package) initialization
*/
HAL_Init();
2014-03-12 17:59:33 -04:00
// set the system clock to be HSE
SystemClock_Config();
// enable GPIO clocks
__GPIOA_CLK_ENABLE();
__GPIOB_CLK_ENABLE();
__GPIOC_CLK_ENABLE();
__GPIOD_CLK_ENABLE();
// enable the CCM RAM
__CCMDATARAMEN_CLK_ENABLE();
#if 0
#if defined(NETDUINO_PLUS_2)
{
GPIO_InitTypeDef GPIO_InitStructure;
GPIO_InitStructure.GPIO_Speed = GPIO_Speed_25MHz;
GPIO_InitStructure.GPIO_Mode = GPIO_Mode_OUT;
GPIO_InitStructure.GPIO_OType = GPIO_OType_PP;
GPIO_InitStructure.GPIO_PuPd = GPIO_PuPd_NOPULL;
#if MICROPY_HW_HAS_SDCARD
// Turn on the power enable for the sdcard (PB1)
GPIO_InitStructure.GPIO_Pin = GPIO_Pin_1;
GPIO_Init(GPIOB, &GPIO_InitStructure);
GPIO_WriteBit(GPIOB, GPIO_Pin_1, Bit_SET);
#endif
// Turn on the power for the 5V on the expansion header (PB2)
GPIO_InitStructure.GPIO_Pin = GPIO_Pin_2;
GPIO_Init(GPIOB, &GPIO_InitStructure);
GPIO_WriteBit(GPIOB, GPIO_Pin_2, Bit_SET);
}
2014-03-12 21:06:26 -04:00
#endif
#endif
// basic sub-system init
pendsv_init();
timer_tim3_init();
led_init();
#if MICROPY_HW_HAS_SWITCH
switch_init0();
#endif
int first_soft_reset = true;
soft_reset:
// check if user switch held to select the reset mode
led_state(1, 0);
led_state(2, 1);
led_state(3, 0);
led_state(4, 0);
uint reset_mode = 1;
#if MICROPY_HW_HAS_SWITCH
if (switch_get()) {
for (uint i = 0; i < 3000; i++) {
if (!switch_get()) {
break;
}
HAL_Delay(20);
if (i % 30 == 29) {
if (++reset_mode > 3) {
reset_mode = 1;
}
led_state(2, reset_mode & 1);
led_state(3, reset_mode & 2);
led_state(4, reset_mode & 4);
}
}
// flash the selected reset mode
for (uint i = 0; i < 6; i++) {
led_state(2, 0);
led_state(3, 0);
led_state(4, 0);
HAL_Delay(50);
led_state(2, reset_mode & 1);
led_state(3, reset_mode & 2);
led_state(4, reset_mode & 4);
HAL_Delay(50);
}
HAL_Delay(400);
}
#endif
#if MICROPY_HW_ENABLE_RTC
if (first_soft_reset) {
rtc_init();
}
2014-03-12 21:06:26 -04:00
#endif
// more sub-system init
#if MICROPY_HW_HAS_SDCARD
if (first_soft_reset) {
sdcard_init();
}
#endif
if (first_soft_reset) {
storage_init();
}
// GC init
gc_init(&_heap_start, &_heap_end);
// Change #if 0 to #if 1 if you want REPL on UART_6 (or another uart)
2014-03-16 03:22:22 -04:00
// as well as on USB VCP
#if 0
{
mp_obj_t args[2] = {
MP_OBJ_NEW_SMALL_INT(PYB_UART_6),
MP_OBJ_NEW_SMALL_INT(115200),
};
pyb_uart_global_debug = pyb_uart_type.make_new((mp_obj_t)&pyb_uart_type,
ARRAY_SIZE(args),
0, args);
}
2014-03-16 03:22:22 -04:00
#else
pyb_uart_global_debug = NULL;
2014-03-16 03:22:22 -04:00
#endif
// Micro Python init
qstr_init();
mp_init();
2014-04-13 00:00:37 -04:00
mp_obj_list_init(mp_sys_path, 0);
mp_obj_list_append(mp_sys_path, MP_OBJ_NEW_QSTR(MP_QSTR_0_colon__slash_));
mp_obj_list_append(mp_sys_path, MP_OBJ_NEW_QSTR(MP_QSTR_0_colon__slash_lib));
mp_obj_list_init(mp_sys_argv, 0);
readline_init();
pin_init();
extint_init();
// local filesystem init
{
// try to mount the flash
FRESULT res = f_mount(&fatfs0, "0:", 1);
if (reset_mode == 3 || res == FR_NO_FILESYSTEM) {
// no filesystem, or asked to reset it, so create a fresh one
// LED on to indicate creation of LFS
led_state(PYB_LED_R2, 1);
uint32_t start_tick = HAL_GetTick();
res = f_mkfs("0:", 0, 0);
if (res == FR_OK) {
// success creating fresh LFS
} else {
__fatal_error("could not create LFS");
}
// create empty main.py
FIL fp;
f_open(&fp, "0:/main.py", FA_WRITE | FA_CREATE_ALWAYS);
UINT n;
f_write(&fp, fresh_main_py, sizeof(fresh_main_py) - 1 /* don't count null terminator */, &n);
// TODO check we could write n bytes
f_close(&fp);
// create .inf driver file
f_open(&fp, "0:/pybcdc.inf", FA_WRITE | FA_CREATE_ALWAYS);
f_write(&fp, fresh_pybcdc_inf, sizeof(fresh_pybcdc_inf) - 1 /* don't count null terminator */, &n);
f_close(&fp);
// create readme file
f_open(&fp, "0:/README.txt", FA_WRITE | FA_CREATE_ALWAYS);
f_write(&fp, fresh_readme_txt, sizeof(fresh_readme_txt) - 1 /* don't count null terminator */, &n);
f_close(&fp);
// keep LED on for at least 200ms
sys_tick_wait_at_least(start_tick, 200);
led_state(PYB_LED_R2, 0);
} else if (res == FR_OK) {
// mount sucessful
} else {
__fatal_error("could not access LFS");
}
}
// make sure we have a 0:/boot.py
{
FILINFO fno;
#if _USE_LFN
fno.lfname = NULL;
fno.lfsize = 0;
#endif
FRESULT res = f_stat("0:/boot.py", &fno);
if (res == FR_OK) {
if (fno.fattrib & AM_DIR) {
// exists as a directory
// TODO handle this case
// see http://elm-chan.org/fsw/ff/img/app2.c for a "rm -rf" implementation
} else {
// exists as a file, good!
}
} else {
// doesn't exist, create fresh file
// LED on to indicate creation of boot.py
led_state(PYB_LED_R2, 1);
uint32_t start_tick = HAL_GetTick();
FIL fp;
f_open(&fp, "0:/boot.py", FA_WRITE | FA_CREATE_ALWAYS);
UINT n;
f_write(&fp, fresh_boot_py, sizeof(fresh_boot_py) - 1 /* don't count null terminator */, &n);
// TODO check we could write n bytes
f_close(&fp);
// keep LED on for at least 200ms
sys_tick_wait_at_least(start_tick, 200);
led_state(PYB_LED_R2, 0);
}
}
// root device defaults to internal flash filesystem
uint root_device = 0;
#if defined(USE_DEVICE_MODE)
usb_storage_medium_t usb_medium = USB_STORAGE_MEDIUM_FLASH;
#endif
#if MICROPY_HW_HAS_SDCARD
// if an SD card is present then mount it on 1:/
if (reset_mode == 1 && sdcard_is_present()) {
FRESULT res = f_mount(&fatfs1, "1:", 1);
if (res != FR_OK) {
printf("[SD] could not mount SD card\n");
} else {
// use SD card as root device
root_device = 1;
if (first_soft_reset) {
// use SD card as medium for the USB MSD
#if defined(USE_DEVICE_MODE)
usb_medium = USB_STORAGE_MEDIUM_SDCARD;
#endif
}
}
}
#else
// Get rid of compiler warning if no SDCARD is configured.
(void)first_soft_reset;
#endif
// run <root>:/boot.py, if it exists
if (reset_mode == 1) {
const char *boot_file;
if (root_device == 0) {
boot_file = "0:/boot.py";
} else {
boot_file = "1:/boot.py";
}
FRESULT res = f_stat(boot_file, NULL);
if (res == FR_OK) {
if (!pyexec_file(boot_file)) {
flash_error(4);
}
}
}
// turn boot-up LEDs off
led_state(2, 0);
led_state(3, 0);
led_state(4, 0);
#if defined(USE_HOST_MODE)
// USB host
pyb_usb_host_init();
#elif defined(USE_DEVICE_MODE)
// USB device
if (reset_mode == 1) {
usb_device_mode_t usb_mode = USB_DEVICE_MODE_CDC_MSC;
if (pyb_config_usb_mode != MP_OBJ_NULL) {
if (strcmp(mp_obj_str_get_str(pyb_config_usb_mode), "CDC+HID") == 0) {
usb_mode = USB_DEVICE_MODE_CDC_HID;
}
}
pyb_usb_dev_init(usb_mode, usb_medium);
} else {
pyb_usb_dev_init(USB_DEVICE_MODE_CDC_MSC, usb_medium);
}
#endif
timer_init0();
#if MICROPY_HW_ENABLE_RNG
2014-04-19 19:45:59 -04:00
rng_init0();
#endif
i2c_init0();
spi_init0();
#if MICROPY_HW_HAS_MMA7660
// MMA accel: init and reset
accel_init();
#endif
#if MICROPY_HW_ENABLE_SERVO
// servo
servo_init();
#endif
#if MICROPY_HW_ENABLE_DAC
// DAC
dac_init();
#endif
// now that everything is initialised, run main script
if (reset_mode == 1 && pyexec_mode_kind == PYEXEC_MODE_FRIENDLY_REPL) {
vstr_t *vstr = vstr_new();
vstr_printf(vstr, "%d:/", root_device);
if (pyb_config_main == MP_OBJ_NULL) {
vstr_add_str(vstr, "main.py");
} else {
vstr_add_str(vstr, mp_obj_str_get_str(pyb_config_main));
}
FRESULT res = f_stat(vstr_str(vstr), NULL);
if (res == FR_OK) {
if (!pyexec_file(vstr_str(vstr))) {
flash_error(3);
}
}
vstr_free(vstr);
}
#if MICROPY_HW_ENABLE_CC3K
// wifi using the CC3000 driver
pyb_wlan_init();
pyb_wlan_start();
#endif
2014-03-24 08:23:37 -04:00
// enter REPL
// REPL mode can change, or it can request a soft reset
for (;;) {
if (pyexec_mode_kind == PYEXEC_MODE_RAW_REPL) {
if (pyexec_raw_repl() != 0) {
break;
}
} else {
if (pyexec_friendly_repl() != 0) {
break;
}
}
}
printf("PYB: sync filesystems\n");
storage_flush();
printf("PYB: soft reboot\n");
first_soft_reset = false;
goto soft_reset;
}
STATIC NORETURN mp_obj_t mp_sys_exit(uint n_args, const mp_obj_t *args) {
int rc = 0;
if (n_args > 0) {
rc = mp_obj_get_int(args[0]);
}
nlr_raise(mp_obj_new_exception_arg1(&mp_type_SystemExit, mp_obj_new_int(rc)));
}
MP_DEFINE_CONST_FUN_OBJ_VAR_BETWEEN(mp_sys_exit_obj, 0, 1, mp_sys_exit);