circuitpython/ports/esp32/boards/deploy_c3.md

15 lines
468 B
Markdown

Program your board using the esptool.py program, found [here](https://github.com/espressif/esptool).
If you are putting MicroPython on your board for the first time then you should
first erase the entire flash using:
```bash
esptool.py --chip esp32c3 --port /dev/ttyUSB0 erase_flash
```
From then on program the firmware starting at address 0x0:
```bash
esptool.py --chip esp32c3 --port /dev/ttyUSB0 --baud 460800 write_flash -z 0x0 esp32c3-20220117-v1.18.bin
```