116 lines
4.6 KiB
Markdown
116 lines
4.6 KiB
Markdown
MicroPython port to STM32 MCUs
|
|
==============================
|
|
|
|
This directory contains the port of MicroPython to ST's line of STM32Fxxx
|
|
microcontrollers. It is based on the STM32Cube HAL library and currently
|
|
supports: STM32F401, STM32F405, STM32F411, STM32F429, STM32F746.
|
|
|
|
The officially supported boards are the line of pyboards: PYBv1.0 and PYBv1.1
|
|
(both with STM32F405), and PYBLITEv1.0 (with STM32F411). See
|
|
[micropython.org/pyboard](http://www.micropython.org/pyboard/) for further
|
|
details.
|
|
|
|
Other boards that are supported include ST Discovery and Nucleo boards.
|
|
See the boards/ subdirectory, which contains the configuration files used
|
|
to build each individual board.
|
|
|
|
Build instructions
|
|
------------------
|
|
|
|
Before building the firmware for a given board the MicroPython cross-compiler
|
|
must be built; it will be used to pre-compile some of the built-in scripts to
|
|
bytecode. The cross-compiler is built and run on the host machine, using:
|
|
```bash
|
|
$ make -C mpy-cross
|
|
```
|
|
This command should be executed from the root directory of this repository.
|
|
All other commands below should be executed from the ports/stm32/ directory.
|
|
|
|
An ARM compiler is required for the build, along with the associated binary
|
|
utilities. The default compiler is `arm-none-eabi-gcc`, which is available for
|
|
Arch Linux via the package `arm-none-eabi-gcc`, for Ubuntu via instructions
|
|
[here](https://launchpad.net/~team-gcc-arm-embedded/+archive/ubuntu/ppa), or
|
|
see [here](https://launchpad.net/gcc-arm-embedded) for the main GCC ARM
|
|
Embedded page. The compiler can be changed using the `CROSS_COMPILE` variable
|
|
when invoking `make`.
|
|
|
|
To build for a given board, run:
|
|
|
|
$ make BOARD=PYBV11
|
|
|
|
The default board is PYBV10 but any of the names of the subdirectories in the
|
|
`boards/` directory can be passed as the argument to `BOARD=`. The above command
|
|
should produce binary images in the `build-PYBV11/` subdirectory (or the
|
|
equivalent directory for the board specified).
|
|
|
|
You must then get your board/microcontroller into DFU mode. On the pyboard
|
|
connect the 3V3 pin to the P1/DFU pin with a wire (they are next to each
|
|
other on the bottom left of the board, second row from the bottom) and then
|
|
reset (by pressing the RST button) or power on the board. Then flash the
|
|
firmware using the command:
|
|
|
|
$ make BOARD=PYBV11 deploy
|
|
|
|
This will use the included `tools/pydfu.py` script. You can use instead the
|
|
`dfu-util` program (available [here](http://dfu-util.sourceforge.net/)) by
|
|
passing `USE_PYDFU=0`:
|
|
|
|
$ make BOARD=PYBV11 USE_PYDFU=0 deploy
|
|
|
|
If flashing the firmware does not work it may be because you don't have the
|
|
correct permissions. Try then:
|
|
|
|
$ sudo make BOARD=PYBV11 deploy
|
|
|
|
Or using `dfu-util` directly:
|
|
|
|
$ sudo dfu-util -a 0 -d 0483:df11 -D build-PYBV11/firmware.dfu
|
|
|
|
|
|
### Flashing the Firmware with stlink
|
|
|
|
ST Discovery or Nucleo boards have a builtin programmer called ST-LINK. With
|
|
these boards and using Linux or OS X, you have the option to upload the
|
|
`stm32` firmware using the `st-flash` utility from the
|
|
[stlink](https://github.com/texane/stlink) project. To do so, connect the board
|
|
with a mini USB cable to its ST-LINK USB port and then use the make target
|
|
`deploy-stlink`. For example, if you have the STM32F4DISCOVERY board, you can
|
|
run:
|
|
|
|
$ make BOARD=STM32F4DISC deploy-stlink
|
|
|
|
The `st-flash` program should detect the USB connection to the board
|
|
automatically. If not, run `lsusb` to determine its USB bus and device number
|
|
and set the `STLINK_DEVICE` environment variable accordingly, using the format
|
|
`<USB_BUS>:<USB_ADDR>`. Example:
|
|
|
|
$ lsusb
|
|
[...]
|
|
Bus 002 Device 035: ID 0483:3748 STMicroelectronics ST-LINK/V2
|
|
$ export STLINK_DEVICE="002:0035"
|
|
$ make BOARD=STM32F4DISC deploy-stlink
|
|
|
|
|
|
### Flashing the Firmware with OpenOCD
|
|
|
|
Another option to deploy the firmware on ST Discovery or Nucleo boards with a
|
|
ST-LINK interface uses [OpenOCD](http://openocd.org/). Connect the board with
|
|
a mini USB cable to its ST-LINK USB port and then use the make target
|
|
`deploy-openocd`. For example, if you have the STM32F4DISCOVERY board:
|
|
|
|
$ make BOARD=STM32F4DISC deploy-openocd
|
|
|
|
The `openocd` program, which writes the firmware to the target board's flash,
|
|
is configured via the file `ports/stm32/boards/openocd_stm32f4.cfg`. This
|
|
configuration should work for all boards based on a STM32F4xx MCU with a
|
|
ST-LINKv2 interface. You can override the path to this configuration by setting
|
|
`OPENOCD_CONFIG` in your Makefile or on the command line.
|
|
|
|
Accessing the board
|
|
-------------------
|
|
|
|
Once built and deployed, access the MicroPython REPL (the Python prompt) via USB
|
|
serial or UART, depending on the board. For the pyboard you can try:
|
|
|
|
$ picocom /dev/ttyACM0
|