43b593725b
It's intended that the actual timeout always be at least the requested timeout. However, due to multiplying by the wrong factor to get from seconds to cycles, a timeout request of e.g., 8.1s (which is less than 8.192s) would give an actual timeout of 8, not 16 as it should. |
||
|---|---|---|
| .. | ||
| asf4@84f56af132 | ||
| asf4_conf | ||
| bindings/samd | ||
| boards | ||
| common-hal | ||
| freetouch@b6859a349e | ||
| modules | ||
| peripherals@d3b20192cf | ||
| sd_mmc | ||
| supervisor | ||
| tools | ||
| .gitattributes | ||
| .gitignore | ||
| audio_dma.c | ||
| audio_dma.h | ||
| background.c | ||
| background.h | ||
| eic_handler.c | ||
| eic_handler.h | ||
| fatfs_port.c | ||
| ld_defines.c | ||
| Makefile | ||
| mpconfigport.h | ||
| mpconfigport.mk | ||
| mphalport.c | ||
| mphalport.h | ||
| qstrdefsport.h | ||
| README.rst | ||
| reset.c | ||
| reset.h | ||
| samd_peripherals_config.h | ||
| shared_timers.c | ||
| shared_timers.h | ||
| timer_handler.c | ||
| timer_handler.h | ||
SAMD21 and SAMD51
==================
This port supports many development boards that utilize SAMD21 and SAMD51 chips. See
https://circuitpython.org/downloads for all supported boards.
Building
--------
For build instructions see this guide: https://learn.adafruit.com/building-circuitpython/
Debugging
---------
For debugging instructions see this guide: https://learn.adafruit.com/debugging-the-samd21-with-gdb
Port Specific modules
---------------------
.. toctree::
../../shared-bindings/samd/index