Glenn Ruben Bakke e07088ce23 nrf5/examples: Adding some notes on which pin layout that has been used in the seeed_tft.py ILI9341 driver for driving the display.

2017-05-29 23:09:53 +02:00

..

mountsd.py

nrf5/modules: Moving python scripts to examples folder to free up some flash space on constrained targets as modules folder is used as frozen files folder.

2017-01-04 17:27:02 +01:00

musictest.py

nrf5/examples: Adding music example. Only working if bluetooth stack is not enabled.

2017-05-18 23:11:41 +02:00

powerup.py

nrf5/examples: Tuning Bluetooth LE example controller python script after testing out the example live. Motor speed of 100 was not enought to lift the airplane. Also turning was hard without setting higher angle values. The new values are just guessed values. However, the flying experience was good.

2017-05-21 18:14:08 +02:00

sdcard.py

nrf5/examples: Updating documentation in SDCard module example. Correcting typo and adding SD card wireing documentation for direct SPI connection.

2017-05-28 22:42:45 +02:00

seeed_tft.py

nrf5/examples: Adding some notes on which pin layout that has been used in the seeed_tft.py ILI9341 driver for driving the display.

2017-05-29 23:09:53 +02:00

servo.py

nrf5/examples: Adding example to show how to use current PWM module to control servo motors.

2017-04-18 21:03:14 +02:00

ssd1306.py

nrf5/examples: Updating ssd1306.py example with a comment describing proceedure on how to use the I2C variant of the driver.

2017-02-02 23:50:43 +01:00

ubluepy_eddystone.py

nrf5/bluetooth: Adding possibility to configure whether advertisment should be connectable or not.

2017-04-02 18:34:56 +02:00

ubluepy_scan.py

nrf5/examples: Updating ubluepy scan example to use constant value from ubluepy instead of hardcoded value.

2017-04-01 22:50:37 +02:00