circuitpython/ports/nrf/boards/tinkeringtech_scoutmakes_azul/README.md

26 lines
1.2 KiB
Markdown
Raw Blame History

This file contains ambiguous Unicode characters

This file contains Unicode characters that might be confused with other characters. If you think that this is intentional, you can safely ignore this warning. Use the Escape button to reveal them.

# Setup
The TinkeringTech ScoutMakes Azul is a bluetooth enabled, feather format, open source platform featuring the nRF52840 from Nordic Semiconductors. The design is based on the Adafruit nRF52840 feather express and uses the Raytac MDBT50Q-1MV2 module.
Schematic, datasheet, pin mapping etc. can be found over [here](https://tinkeringtech.com/scoutmakes-azul).
features:
- ARM Cortex M4F (with HW floating point acceleration) running at 64MHz
- Raytac MDBT50Q-1MV2 BLE module. FCC / IC / TELEC certified module
- 1MB flash and 256KB SRAM
- Native Open Source USB stack pre-programmed with UF2 bootloader and CircuitPython
- 128×32 OLED display
- USB type-C
- On/off power switch
- Bluetooth Low Energy compatible 2.4GHz radio (Details available in the nRF52840 product specification)
- BT5.1 & BT5 Bluetooth Specification Certified
- Supports BT5 Long Range Feature
- 1.7v to 3.3v operation with internal linear and DC/DC voltage regulators
- 21 GPIO, 6 x 12-bit ADC pins, up to 12 PWM outputs (3 PWM modules with 4 outputs each)
- Pin #3 red LED for general purpose blinking,
- Programmable NeoPixel for colorful feedback
- 4 mounting holes
- Reset button
- Works out of the box with Adafruit feather wings.
- Open source design.