djsundog
/
circuitpython
1
0
Fork 0
Code Issues Pull Requests Packages Projects Releases Wiki Activity
circuitpython/Makefile

341 lines
12 KiB
Makefile
Raw Blame History

# SPDX-FileCopyrightText: 2014 MicroPython & CircuitPython contributors (https://github.com/adafruit/circuitpython/graphs/contributors)
#
# SPDX-License-Identifier: MIT
# Top-level Makefile for documentation builds and miscellaneous tasks.
#
# You can set these variables from the command line.
PYTHON = python3
SPHINXOPTS = -W --keep-going
SPHINXBUILD = sphinx-build
PAPER =
# path to build the generated docs
BUILDDIR = _build
# path to source files to process
SOURCEDIR = .
# path to conf.py
CONFDIR = .
# Run "make FORCE= ..." to avoid rebuilding from scratch (and risk
# producing incorrect docs).
FORCE = -E
VERBOSE = -v
# path to generated type stubs
STUBDIR = circuitpython-stubs
# Run "make VALIDATE= stubs" to avoid validating generated stub files
VALIDATE = -v
# path to pypi source distributions
DISTDIR = dist
# Make sure you have Sphinx installed, then set the SPHINXBUILD environment variable to point to the
# full path of the '$(SPHINXBUILD)' executable. Alternatively you can add the directory with the
# executable to your PATH. If you don't have Sphinx installed, grab it from http://sphinx-doc.org/)
# Internal variables.
PAPEROPT_a4 = -D latex_paper_size=a4
PAPEROPT_letter = -D latex_paper_size=letter
BASEOPTS = -c $(CONFDIR) $(PAPEROPT_$(PAPER)) $(FORCE) $(VERBOSE) $(SPHINXOPTS) $(SOURCEDIR)
ALLSPHINXOPTS = -d $(BUILDDIR)/doctrees $(BASEOPTS)
# the i18n builder cannot share the environment and doctrees with the others
I18NSPHINXOPTS = $(BASEOPTS)
TRANSLATE_SOURCES = extmod lib main.c ports/atmel-samd ports/cxd56 ports/espressif ports/mimxrt10xx ports/nrf ports/raspberrypi ports/stm py shared-bindings shared-module supervisor
# Paths to exclude from TRANSLATE_SOURCES
# Each must be preceded by "-path"; if any wildcards, enclose in quotes.
# Separate by "-o" (Find's "or" operand)
TRANSLATE_SOURCES_EXC = -path "ports/*/build-*" \
-o -path "ports/*/build" \
-o -path ports/atmel-samd/asf4 \
-o -path ports/cxd56/spresense-exported-sdk \
-o -path ports/espressif/esp-idf \
-o -path ports/mimxrt10xx/sdk \
-o -path ports/raspberrypi/sdk \
-o -path ports/stm/st_driver \
-o -path lib/tinyusb \
-o -path lib/lwip \
-o -path extmod/ulab/circuitpython \
-o -path extmod/ulab/micropython \
.PHONY: help clean html dirhtml singlehtml pickle json htmlhelp qthelp devhelp epub latex latexpdf text man changes linkcheck doctest gettext stubs
help:
@echo "Please use \`make <target>' where <target> is one of"
@echo " html to make standalone HTML files"
@echo " dirhtml to make HTML files named index.html in directories"
@echo " singlehtml to make a single large HTML file"
@echo " pickle to make pickle files"
@echo " json to make JSON files"
@echo " htmlhelp to make HTML files and a HTML help project"
@echo " qthelp to make HTML files and a qthelp project"
@echo " devhelp to make HTML files and a Devhelp project"
@echo " epub to make an epub"
@echo " latex to make LaTeX files, you can set PAPER=a4 or PAPER=letter"
@echo " latexpdf to make LaTeX files and run them through pdflatex"
@echo " latexpdfja to make LaTeX files and run them through platex/dvipdfmx"
@echo " text to make text files"
@echo " man to make manual pages"
@echo " texinfo to make Texinfo files"
@echo " info to make Texinfo files and run them through makeinfo"
@echo " gettext to make PO message catalogs"
@echo " changes to make an overview of all changed/added/deprecated items"
@echo " xml to make Docutils-native XML files"
@echo " pseudoxml to make pseudoxml-XML files for display purposes"
@echo " linkcheck to check all external links for integrity"
@echo " doctest to run all doctests embedded in the documentation (if enabled)"
@echo " fetch-all-submodules to fetch submodules for all ports"
@echo " remove-all-submodules remove all submodules, including files and .git/ data"
clean:
rm -rf $(BUILDDIR)/*
rm -rf autoapi
rm -rf $(STUBDIR) $(DISTDIR) *.egg-info
html:
$(SPHINXBUILD) -b html $(ALLSPHINXOPTS) $(BUILDDIR)/html
@echo
@echo "Build finished. The HTML pages are in $(BUILDDIR)/html."
dirhtml:
$(SPHINXBUILD) -b dirhtml $(ALLSPHINXOPTS) $(BUILDDIR)/dirhtml
@echo
@echo "Build finished. The HTML pages are in $(BUILDDIR)/dirhtml."
singlehtml:
$(SPHINXBUILD) -b singlehtml $(ALLSPHINXOPTS) $(BUILDDIR)/singlehtml
@echo
@echo "Build finished. The HTML page is in $(BUILDDIR)/singlehtml."
pickle:
$(SPHINXBUILD) -b pickle $(ALLSPHINXOPTS) $(BUILDDIR)/pickle
@echo
@echo "Build finished; now you can process the pickle files."
json:
$(SPHINXBUILD) -b json $(ALLSPHINXOPTS) $(BUILDDIR)/json
@echo
@echo "Build finished; now you can process the JSON files."
htmlhelp:
$(SPHINXBUILD) -b htmlhelp $(ALLSPHINXOPTS) $(BUILDDIR)/htmlhelp
@echo
@echo "Build finished; now you can run HTML Help Workshop with the" \
".hhp project file in $(BUILDDIR)/htmlhelp."
qthelp:
$(SPHINXBUILD) -b qthelp $(ALLSPHINXOPTS) $(BUILDDIR)/qthelp
@echo
@echo "Build finished; now you can run "qcollectiongenerator" with the" \
".qhcp project file in $(BUILDDIR)/qthelp, like this:"
@echo "# qcollectiongenerator $(BUILDDIR)/qthelp/MicroPython.qhcp"
@echo "To view the help file:"
@echo "# assistant -collectionFile $(BUILDDIR)/qthelp/MicroPython.qhc"
devhelp:
$(SPHINXBUILD) -b devhelp $(ALLSPHINXOPTS) $(BUILDDIR)/devhelp
@echo
@echo "Build finished."
@echo "To view the help file:"
@echo "# mkdir -p $$HOME/.local/share/devhelp/MicroPython"
@echo "# ln -s $(BUILDDIR)/devhelp $$HOME/.local/share/devhelp/MicroPython"
@echo "# devhelp"
epub:
$(SPHINXBUILD) -b epub $(ALLSPHINXOPTS) $(BUILDDIR)/epub
@echo
@echo "Build finished. The epub file is in $(BUILDDIR)/epub."
latex:
$(SPHINXBUILD) -b latex $(ALLSPHINXOPTS) $(BUILDDIR)/latex
@echo
@echo "Build finished; the LaTeX files are in $(BUILDDIR)/latex."
@echo "Run \`make' in that directory to run these through (pdf)latex" \
"(use \`make latexpdf' here to do that automatically)."
# seems to be malfunctioning
latexpdf:
$(SPHINXBUILD) -b latex $(ALLSPHINXOPTS) $(BUILDDIR)/latex
@echo "Running LaTeX files through pdflatex..."
$(MAKE) -C $(BUILDDIR)/latex all-pdf
@echo "pdflatex finished; the PDF files are in $(BUILDDIR)/latex."
# seems to be malfunctioning
latexpdfja:
$(SPHINXBUILD) -b latex $(ALLSPHINXOPTS) $(BUILDDIR)/latex
@echo "Running LaTeX files through platex and dvipdfmx..."
$(MAKE) -C $(BUILDDIR)/latex all-pdf-ja
@echo "pdflatex finished; the PDF files are in $(BUILDDIR)/latex."
# seems to be malfunctioning
text:
$(SPHINXBUILD) -b text $(ALLSPHINXOPTS) $(BUILDDIR)/text
@echo
@echo "Build finished. The text files are in $(BUILDDIR)/text."
# seems to be malfunctioning
man:
$(SPHINXBUILD) -b man $(ALLSPHINXOPTS) $(BUILDDIR)/man
@echo
@echo "Build finished. The manual pages are in $(BUILDDIR)/man."
texinfo:
$(SPHINXBUILD) -b texinfo $(ALLSPHINXOPTS) $(BUILDDIR)/texinfo
@echo
@echo "Build finished. The Texinfo files are in $(BUILDDIR)/texinfo."
@echo "Run \`make' in that directory to run these through makeinfo" \
"(use \`make info' here to do that automatically)."
info:
$(SPHINXBUILD) -b texinfo $(ALLSPHINXOPTS) $(BUILDDIR)/texinfo
@echo "Running Texinfo files through makeinfo..."
make -C $(BUILDDIR)/texinfo info
@echo "makeinfo finished; the Info files are in $(BUILDDIR)/texinfo."
gettext:
$(SPHINXBUILD) -b gettext $(I18NSPHINXOPTS) $(BUILDDIR)/locale
@echo
@echo "Build finished. The message catalogs are in $(BUILDDIR)/locale."
changes:
$(SPHINXBUILD) -b changes $(ALLSPHINXOPTS) $(BUILDDIR)/changes
@echo
@echo "The overview file is in $(BUILDDIR)/changes."
linkcheck:
$(SPHINXBUILD) -b linkcheck $(ALLSPHINXOPTS) $(BUILDDIR)/linkcheck
@echo
@echo "Link check complete; look for any errors in the above output " \
"or in $(BUILDDIR)/linkcheck/output.txt."
doctest:
$(SPHINXBUILD) -b doctest $(ALLSPHINXOPTS) $(BUILDDIR)/doctest
@echo "Testing of doctests in the sources finished, look at the " \
"results in $(BUILDDIR)/doctest/output.txt."
xml:
$(SPHINXBUILD) -b xml $(ALLSPHINXOPTS) $(BUILDDIR)/xml
@echo
@echo "Build finished. The XML files are in $(BUILDDIR)/xml."
pseudoxml:
$(SPHINXBUILD) -b pseudoxml $(ALLSPHINXOPTS) $(BUILDDIR)/pseudoxml
@echo
@echo "Build finished. The pseudo-XML files are in $(BUILDDIR)/pseudoxml."
# phony target so we always run
.PHONY: all-source
all-source:
TRANSLATE_COMMAND=find $(TRANSLATE_SOURCES) -type d \( $(TRANSLATE_SOURCES_EXC) \) -prune -o -type f \( -iname "*.c" -o -iname "*.h" \) -print | (LC_ALL=C sort) | xgettext -x locale/synthetic.pot -f- -L C -s --add-location=file --keyword=MP_ERROR_TEXT -o - | sed -e '/"POT-Creation-Date: /d'
locale/circuitpython.pot: all-source
$(TRANSLATE_COMMAND) > $@
# Historically, `make translate` updated the .pot file and ran msgmerge.
# However, this was a frequent source of merge conflicts. Weblate can perform
# msgmerge, so make translate merely update the translation template file.
.PHONY: translate
translate: locale/circuitpython.pot
# Note that normally we rely on weblate to perform msgmerge. This reduces the
# chance of a merge conflict between developer changes (that only add and
# remove source strings) and weblate changes (that only add and remove
# translated strings from po files). However, in case this is legitimately
# needed we preserve a rule to do it.
.PHONY: msgmerge
msgmerge:
for po in $(shell ls locale/*.po); do msgmerge -U $$po -s --no-fuzzy-matching --add-location=file locale/circuitpython.pot; done
merge-translate:
git merge HEAD 1>&2 2> /dev/null; test $$? -eq 128
rm locale/*~ || true
git checkout --theirs -- locale/*
make translate
.PHONY: check-translate
check-translate:
$(TRANSLATE_COMMAND) > locale/circuitpython.pot.tmp
$(PYTHON) tools/check_translations.py locale/circuitpython.pot.tmp locale/circuitpython.pot; status=$$?; rm -f locale/circuitpython.pot.tmp; exit $$status
.PHONY: stubs
stubs:
@rm -rf circuitpython-stubs
@mkdir circuitpython-stubs
@$(PYTHON) tools/extract_pyi.py shared-bindings/ $(STUBDIR)
@$(PYTHON) tools/extract_pyi.py extmod/ulab/code/ $(STUBDIR)/ulab
@$(PYTHON) tools/extract_pyi.py ports/atmel-samd/bindings $(STUBDIR)
@$(PYTHON) tools/extract_pyi.py ports/espressif/bindings $(STUBDIR)
@$(PYTHON) tools/extract_pyi.py ports/raspberrypi/bindings $(STUBDIR)
@cp setup.py-stubs circuitpython-stubs/setup.py
@cp README.rst-stubs circuitpython-stubs/README.rst
@cp MANIFEST.in-stubs circuitpython-stubs/MANIFEST.in
@$(PYTHON) -m build circuitpython-stubs
.PHONY: check-stubs
check-stubs: stubs
@(cd $(STUBDIR) && set -- */__init__.pyi && mypy "$${@%/*}")
@tools/test-stubs.sh
update-frozen-libraries:
@echo "Updating all frozen libraries to latest tagged version."
cd frozen; for library in *; do cd $$library; ../../tools/git-checkout-latest-tag.sh; cd ..; done
one-of-each: samd21 litex mimxrt10xx nrf stm
samd21:
$(MAKE) -C ports/atmel-samd BOARD=trinket_m0
samd51:
$(MAKE) -C ports/atmel-samd BOARD=feather_m4_express
espressif:
$(MAKE) -C ports/espressif BOARD=espressif_saola_1_wroom
litex:
$(MAKE) -C ports/litex BOARD=fomu
mimxrt10xx:
$(MAKE) -C ports/mimxrt10xx BOARD=feather_mimxrt1011
nrf:
$(MAKE) -C ports/nrf BOARD=feather_nrf52840_express
stm:
$(MAKE) -C ports/stm BOARD=feather_stm32f405_express
clean-one-of-each: clean-samd21 clean-samd51 clean-espressif clean-litex clean-mimxrt10xx clean-nrf clean-stm
clean-samd21:
$(MAKE) -C ports/atmel-samd BOARD=trinket_m0 clean
clean-samd51:
$(MAKE) -C ports/atmel-samd BOARD=feather_m4_express clean
clean-espressif:
$(MAKE) -C ports/espressif BOARD=espressif_saola_1_wroom clean
clean-litex:
$(MAKE) -C ports/litex BOARD=fomu clean
clean-mimxrt10xx:
$(MAKE) -C ports/mimxrt10xx BOARD=feather_mimxrt1011 clean
clean-nrf:
$(MAKE) -C ports/nrf BOARD=feather_nrf52840_express clean
clean-stm:
$(MAKE) -C ports/stm BOARD=feather_stm32f405_express clean
.PHONY: fetch-all-submodules
fetch-all-submodules:
$(PYTHON) tools/ci_fetch_deps.py all
.PHONY: remove-all-submodules
remove-all-submodules:
git submodule deinit -f --all
rm -rf .git/modules/*
.PHONY: fetch-tags
fetch-tags:
git fetch --tags --recurse-submodules=no --shallow-since="2023-02-01" https://github.com/adafruit/circuitpython HEAD
Reference in New Issue View Git Blame Copy Permalink