246 lines
8.0 KiB
Markdown
246 lines
8.0 KiB
Markdown
MicroPython port to ESP8266
|
||
===========================
|
||
|
||
This is a port of MicroPython to the Espressif ESP8266 WiFi microcontroller.
|
||
MicroPython runs on this chip without any underlying operating system, using
|
||
the ESP8266 NONOS SDK.
|
||
|
||
Supported features include:
|
||
- REPL (Python prompt) over UART0.
|
||
- Garbage collector, exceptions.
|
||
- Unicode support.
|
||
- Builtin modules: gc, array, collections, io, struct, sys, esp, network,
|
||
many more.
|
||
- Arbitrary-precision long integers and 30-bit precision floats.
|
||
- WiFi support.
|
||
- Sockets using modlwip.
|
||
- GPIO and bit-banging I2C, SPI support.
|
||
- 1-Wire and WS2812 (aka Neopixel) protocols support.
|
||
- Internal filesystem using the flash.
|
||
- WebREPL over WiFi from a browser (clients at https://github.com/micropython/webrepl).
|
||
- Modules for HTTP, MQTT, many other formats and protocols via
|
||
https://github.com/micropython/micropython-lib .
|
||
|
||
Documentation is available at http://docs.micropython.org/en/latest/esp8266/quickref.html.
|
||
|
||
Build instructions
|
||
------------------
|
||
|
||
You need the esp-open-sdk toolchain, which provides both the compiler and libraries.
|
||
|
||
There are two ways to do this:
|
||
- By running the toolchain in [Docker](https://www.docker.com/) (**recommended**).
|
||
- By installing a pre-built toolchain and adding it to your `$PATH`.
|
||
|
||
Regardless of which toolchain you use, the first step is to make sure required
|
||
submodules are available:
|
||
|
||
```bash
|
||
$ make -C ports/esp8266 submodules
|
||
```
|
||
|
||
See the README in the repository root for more information about external
|
||
dependencies.
|
||
|
||
__Building with Docker__
|
||
|
||
Once you have installed Docker, you can run all of the following build
|
||
commands inside the Docker container by prefixing them with `docker
|
||
run --rm -v $HOME:$HOME -u $UID -w $PWD larsks/esp-open-sdk ...command...`.
|
||
This will automatically download the Docker image provided by @larsks which
|
||
contains the full toolchain and SDK.
|
||
|
||
Then you need to compile the MicroPython cross-compiler (`mpy-cross`). From
|
||
the root of this repository, run:
|
||
|
||
```bash
|
||
$ docker run --rm -v $HOME:$HOME -u $UID -w $PWD larsks/esp-open-sdk make -C mpy-cross
|
||
```
|
||
|
||
**Note:** The `mpy-cross` binary will likely only work inside the Docker
|
||
container. This will not be a problem if you're only building ESP8266
|
||
firmware, but if you're also working on other ports then you will need to
|
||
recompile for your host when switching between ports. To avoid this, use
|
||
the local toolchain instead.
|
||
|
||
Then to compile the ESP8266 firmware:
|
||
|
||
```
|
||
$ cd ports/esp8266
|
||
$ docker run --rm -v $HOME:$HOME -u $UID -w $PWD larsks/esp-open-sdk make -j BOARD=GENERIC
|
||
```
|
||
|
||
This will produce binary images in the `build-GENERIC/` subdirectory.
|
||
Substitute the board for whichever board you're using.
|
||
|
||
__Building with a local toolchain__
|
||
|
||
First download the pre-built toolchain (thanks to @jepler from Adafruit). You
|
||
will need to find somewhere to put it in your filesystem, e.g. `~/espressif`.
|
||
Create that directory first if necessary.
|
||
|
||
```
|
||
$ cd ~/espressif # Change as necessary
|
||
$ wget https://github.com/jepler/esp-open-sdk/releases/download/2018-06-10/xtensa-lx106-elf-standalone.tar.gz
|
||
$ tar zxvf xtensa-lx106-elf-standalone.tar.gz
|
||
$ rm xtensa-lx106-elf/bin/esptool.py # Use system version of esptool.py instead.
|
||
```
|
||
|
||
Then append this to your `$PATH` variable so the compiler binaries can be
|
||
found:
|
||
|
||
```
|
||
$ export "PATH=$HOME/espressif/xtensa-lx106-elf/bin/:$PATH"
|
||
```
|
||
|
||
(You will need to do this each time you start a new terminal)
|
||
|
||
Then you need to compile the MicroPython cross-compiler (`mpy-cross`). From
|
||
the root of this repository, run:
|
||
|
||
```bash
|
||
$ make -C mpy-cross
|
||
```
|
||
|
||
Then to compile the ESP8266 firmware:
|
||
|
||
```
|
||
$ cd ports/esp8266
|
||
$ make -j BOARD=GENERIC
|
||
```
|
||
|
||
This will produce binary images in the `build-GENERIC/` subdirectory.
|
||
Substitute the board for whichever board you're using.
|
||
|
||
|
||
Installing MicroPython
|
||
----------------------
|
||
|
||
To communicate with the board you will need to install `esptool.py`. This can
|
||
be obtained from your system package manager or from PyPi via `pip`.
|
||
|
||
If you install MicroPython to your module for the first time, or after
|
||
installing any other firmware, you should erase flash completely:
|
||
|
||
```bash
|
||
$ esptool.py --port /dev/ttyXXX erase_flash
|
||
```
|
||
|
||
Erasing the flash is also useful as a troubleshooting measure, if a module doesn't
|
||
behave as expected.
|
||
|
||
To flash MicroPython image to your ESP8266, use:
|
||
```bash
|
||
$ make deploy
|
||
```
|
||
|
||
(If using the Docker instructions above, do not run this command via Docker as
|
||
it will need access to the serial port. Run it directly instead.)
|
||
|
||
This will use the `esptool.py` script to download the images. You must have
|
||
your ESP module in the bootloader mode, and connected to a serial port on your PC.
|
||
The default serial port is `/dev/ttyACM0`, flash mode is `qio` and flash size is
|
||
`detect` (auto-detect based on Flash ID).
|
||
|
||
To specify other values for `esptool.py`, use, e.g.:
|
||
```bash
|
||
$ make PORT=/dev/ttyUSB0 FLASH_MODE=qio FLASH_SIZE=32m deploy
|
||
```
|
||
(note that flash size is in megabits)
|
||
|
||
If you want to flash manually using `esptool.py` directly, the image produced is
|
||
`build-GENERIC/firmware-combined.bin`, to be flashed at 0x00000.
|
||
|
||
The default board definition is the directory `boards/GENERIC`.
|
||
For a custom configuration you can define your own board in the directory `boards/`.
|
||
|
||
The `BOARD` variable can be set on the make command line, for example:
|
||
```bash
|
||
$ make BOARD=GENERIC_512K
|
||
```
|
||
|
||
__512KB FlashROM version__
|
||
|
||
The normal build described above requires modules with at least 1MB of FlashROM
|
||
onboard. There's a special configuration for 512KB modules, which can be
|
||
built with `make BOARD=GENERIC_512K`. This configuration is highly limited, lacks
|
||
filesystem support, WebREPL, and has many other features disabled. It's mostly
|
||
suitable for advanced users who are interested to fine-tune options to achieve a
|
||
required setup. If you are an end user, please consider using a module with at
|
||
least 1MB of FlashROM.
|
||
|
||
First start
|
||
-----------
|
||
|
||
Be sure to change ESP8266's WiFi access point password ASAP, see below.
|
||
|
||
__Serial prompt__
|
||
|
||
You can access the REPL (Python prompt) over UART (the same as used for
|
||
programming).
|
||
- Baudrate: 115200
|
||
|
||
Run `help()` for some basic information.
|
||
|
||
__WiFi__
|
||
|
||
Initially, the device configures itself as a WiFi access point (AP).
|
||
- ESSID: MicroPython-xxxxxx (x’s are replaced with part of the MAC address).
|
||
- Password: micropythoN (note the upper-case N).
|
||
- IP address of the board: 192.168.4.1.
|
||
- DHCP-server is activated.
|
||
- Please be sure to change the password to something non-guessable
|
||
immediately. `help()` gives information how.
|
||
|
||
__WebREPL__
|
||
|
||
Python prompt over WiFi, connecting through a browser.
|
||
- Hosted at http://micropython.org/webrepl.
|
||
- GitHub repository https://github.com/micropython/webrepl.
|
||
Please follow the instructions there.
|
||
|
||
__mip__
|
||
|
||
The ESP8266 port comes with the built-in `mip` package manager, which can
|
||
be used to install additional modules:
|
||
|
||
```
|
||
>>> import mip
|
||
>>> mip.install("hmac")
|
||
[...]
|
||
>>> import hmac
|
||
>>> hmac.new(b"1234567890", msg="hello world").hexdigest()
|
||
```
|
||
|
||
See [Package management](https://docs.micropython.org/en/latest/reference/packages.html) for more
|
||
information about `mip`.
|
||
|
||
Downloading and installing packages may requite a lot of free memory,
|
||
if you get an error, retry immediately after the hard reset.
|
||
|
||
Documentation
|
||
-------------
|
||
|
||
More detailed documentation and instructions can be found at
|
||
http://docs.micropython.org/en/latest/esp8266/ , which includes Quick
|
||
Reference, Tutorial, General Information related to ESP8266 port, and
|
||
to MicroPython in general.
|
||
|
||
Troubleshooting
|
||
---------------
|
||
|
||
While the port is in beta, it's known to be generally stable. If you
|
||
experience strange bootloops, crashes, lockups, here's a list to check against:
|
||
|
||
- You didn't erase flash before programming MicroPython firmware.
|
||
- Firmware can be occasionally flashed incorrectly. Just retry. Recent
|
||
esptool.py versions have --verify option.
|
||
- Power supply you use doesn't provide enough power for ESP8266 or isn't
|
||
stable enough.
|
||
- A module/flash may be defective (not unheard of for cheap modules).
|
||
|
||
Please consult dedicated ESP8266 forums/resources for hardware-related
|
||
problems.
|
||
|
||
Additional information may be available by the documentation links above.
|