308 lines
12 KiB
C
308 lines
12 KiB
C
/*
|
|
* This file is part of the MicroPython project, http://micropython.org/
|
|
*
|
|
* The MIT License (MIT)
|
|
*
|
|
* SPDX-FileCopyrightText: Copyright (c) 2023 Milind Movasha
|
|
*
|
|
* SPDX-License-Identifier: BSD-3-Clause
|
|
*
|
|
*
|
|
* Permission is hereby granted, free of charge, to any person obtaining a copy
|
|
* of this software and associated documentation files (the "Software"), to deal
|
|
* in the Software without restriction, including without limitation the rights
|
|
* to use, copy, modify, merge, publish, distribute, sublicense, and/or sell
|
|
* copies of the Software, and to permit persons to whom the Software is
|
|
* furnished to do so, subject to the following conditions:
|
|
*
|
|
* The above copyright notice and this permission notice shall be included in
|
|
* all copies or substantial portions of the Software.
|
|
*
|
|
* THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
|
|
* IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
|
|
* FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE
|
|
* AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
|
|
* LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM,
|
|
* OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN
|
|
* THE SOFTWARE.
|
|
*/
|
|
|
|
#include <stdio.h>
|
|
#include "common-hal/analogbufio/BufferedIn.h"
|
|
#include "shared-bindings/analogbufio/BufferedIn.h"
|
|
#include "shared-bindings/microcontroller/Pin.h"
|
|
#include "shared/runtime/interrupt_char.h"
|
|
#include "py/runtime.h"
|
|
#include <string.h>
|
|
#include <stdio.h>
|
|
#include "sdkconfig.h"
|
|
#include "freertos/FreeRTOS.h"
|
|
#include "freertos/task.h"
|
|
#include "freertos/semphr.h"
|
|
#include "driver/adc.h"
|
|
|
|
// #define DEBUG_ANALOGBUFIO
|
|
|
|
#define NUM_SAMPLES_PER_INTERRUPT 256
|
|
#define NUM_ADC_CHANNELS 1
|
|
#define DMA_BUFFER_SIZE 1024
|
|
#define ATTENUATION ADC_ATTEN_DB_0
|
|
#define ADC_READ_TIMEOUT_MS 2000
|
|
|
|
#if defined(CONFIG_IDF_TARGET_ESP32)
|
|
#define ADC_RESULT_BYTE 2
|
|
#define ADC_CONV_LIMIT_EN 1 // For ESP32, this should always be set to 1
|
|
#elif defined(CONFIG_IDF_TARGET_ESP32S2)
|
|
#define ADC_RESULT_BYTE 2
|
|
#define ADC_CONV_LIMIT_EN 0
|
|
#elif defined(CONFIG_IDF_TARGET_ESP32C3) || defined(CONFIG_IDF_TARGET_ESP32H2)
|
|
#define ADC_RESULT_BYTE 4
|
|
#define ADC_CONV_LIMIT_EN 0
|
|
#elif defined(CONFIG_IDF_TARGET_ESP32S3)
|
|
#define ADC_RESULT_BYTE 4
|
|
#define ADC_CONV_LIMIT_EN 0
|
|
#endif
|
|
|
|
static void start_dma(analogbufio_bufferedin_obj_t *self, adc_digi_convert_mode_t *convert_mode, adc_digi_output_format_t *output_format);
|
|
static void stop_dma(analogbufio_bufferedin_obj_t *self);
|
|
|
|
void common_hal_analogbufio_bufferedin_construct(analogbufio_bufferedin_obj_t *self, const mcu_pin_obj_t *pin, uint32_t sample_rate) {
|
|
self->pin = pin;
|
|
self->sample_rate = sample_rate;
|
|
}
|
|
|
|
static void start_dma(analogbufio_bufferedin_obj_t *self, adc_digi_convert_mode_t *convert_mode, adc_digi_output_format_t *output_format) {
|
|
uint16_t adc1_chan_mask = 0;
|
|
uint16_t adc2_chan_mask = 0;
|
|
|
|
const mcu_pin_obj_t *pin = self->pin;
|
|
uint32_t sample_rate = self->sample_rate;
|
|
|
|
*output_format = ADC_DIGI_OUTPUT_FORMAT_TYPE1;
|
|
if (pin->adc_index == ADC_UNIT_1) {
|
|
*convert_mode = ADC_CONV_SINGLE_UNIT_1;
|
|
} else {
|
|
*convert_mode = ADC_CONV_SINGLE_UNIT_2;
|
|
}
|
|
|
|
if (pin->adc_index == NO_ADC || pin->adc_channel == NO_ADC_CHANNEL) {
|
|
raise_ValueError_invalid_pin();
|
|
}
|
|
|
|
/*
|
|
* Chip version Conversion Mode Output Format Type
|
|
* ESP32 1 TYPE1
|
|
* ESP32S2 1,2,BOTH,ALTER TYPE1, TYPE2
|
|
* ESP32C3 ALTER TYPE2
|
|
* ESP32S3 1,2,BOTH,ALTER TYPE2
|
|
* ESP32H3 1,2,BOTH,ALTER TYPE2
|
|
*/
|
|
|
|
#if defined(CONFIG_IDF_TARGET_ESP32)
|
|
if (pin->adc_index != ADC_UNIT_1) {
|
|
/*
|
|
* ESP32 only supports ADC1 unit
|
|
* https://www.espressif.com/sites/default/files/documentation/esp32_technical_reference_manual_en.pdf
|
|
* Table 29-3
|
|
*/
|
|
raise_ValueError_invalid_pin();
|
|
}
|
|
#endif
|
|
|
|
#if defined(CONFIG_IDF_TARGET_ESP32C3)
|
|
/* ESP32C3 only supports alter mode */
|
|
*convert_mode = ADC_CONV_ALTER_UNIT;
|
|
#endif
|
|
|
|
#if defined(CONFIG_IDF_TARGET_ESP32C3) || defined(CONFIG_IDF_TARGET_ESP32S3) || defined(CONFIG_IDF_TARGET_ESP32H2)
|
|
*output_format = ADC_DIGI_OUTPUT_FORMAT_TYPE2;
|
|
#endif
|
|
|
|
common_hal_mcu_pin_claim(pin);
|
|
|
|
if (pin->adc_index == ADC_UNIT_1) {
|
|
adc1_chan_mask = 1 << pin->adc_channel;
|
|
} else {
|
|
adc2_chan_mask = 1 << pin->adc_channel;
|
|
}
|
|
|
|
adc_digi_init_config_t adc_dma_config = {
|
|
.max_store_buf_size = DMA_BUFFER_SIZE,
|
|
.conv_num_each_intr = NUM_SAMPLES_PER_INTERRUPT,
|
|
.adc1_chan_mask = adc1_chan_mask,
|
|
.adc2_chan_mask = adc2_chan_mask,
|
|
};
|
|
|
|
#if defined(DEBUG_ANALOGBUFIO)
|
|
mp_printf(&mp_plat_print,"pin:%d, ADC channel:%d, ADC index:%d, adc1_chan_mask:0x%x, adc2_chan_mask:0x%x\n",pin->number,pin->adc_channel,pin->adc_index,adc1_chan_mask,adc2_chan_mask);
|
|
#endif // DEBUG_ANALOGBUFIO
|
|
esp_err_t err = adc_digi_initialize(&adc_dma_config);
|
|
if (ESP_OK != err) {
|
|
common_hal_analogbufio_bufferedin_deinit(self);
|
|
mp_raise_ValueError_varg(translate("Unable to initialize ADC DMA controller, ErrorCode:%d"),err);
|
|
}
|
|
|
|
adc_digi_configuration_t dig_cfg = {
|
|
.conv_limit_en = ADC_CONV_LIMIT_EN,
|
|
.conv_limit_num = 250,
|
|
.pattern_num = NUM_ADC_CHANNELS,
|
|
.sample_freq_hz = sample_rate,
|
|
.conv_mode = *convert_mode,
|
|
.format = *output_format,
|
|
};
|
|
|
|
#if defined(DEBUG_ANALOGBUFIO)
|
|
mp_printf(&mp_plat_print,"conversion_mode:%d, format:%d, conv_limit_en:%d, sample_rate:%d\n",*convert_mode,*output_format,ADC_CONV_LIMIT_EN,sample_rate);
|
|
#endif // DEBUG_ANALOGBUFIO
|
|
|
|
adc_digi_pattern_config_t adc_pattern[NUM_ADC_CHANNELS] = {0};
|
|
adc_pattern[0].atten = ATTENUATION;
|
|
adc_pattern[0].channel = pin->adc_channel;
|
|
if (pin->adc_index == ADC_UNIT_1) {
|
|
adc_pattern[0].unit = 0;
|
|
} else {
|
|
adc_pattern[0].unit = 1;
|
|
}
|
|
adc_pattern[0].bit_width = SOC_ADC_DIGI_MAX_BITWIDTH;
|
|
|
|
dig_cfg.adc_pattern = adc_pattern;
|
|
#if defined(DEBUG_ANALOGBUFIO)
|
|
mp_printf(&mp_plat_print,"adc_pattern[0].channel:%d, adc_pattern[0].unit:%d, adc_pattern[0].atten:%d\n",adc_pattern[0].channel,adc_pattern[0].unit,adc_pattern[0].atten);
|
|
#endif // DEBUG_ANALOGBUFIO
|
|
|
|
err = adc_digi_controller_configure(&dig_cfg);
|
|
if (ESP_OK != err) {
|
|
common_hal_analogbufio_bufferedin_deinit(self);
|
|
mp_raise_ValueError_varg(translate("Unable to configure ADC DMA controller, ErrorCode:%d"),err);
|
|
}
|
|
err = adc_digi_start();
|
|
if (ESP_OK != err) {
|
|
common_hal_analogbufio_bufferedin_deinit(self);
|
|
mp_raise_ValueError_varg(translate("Unable to start ADC DMA controller, ErrorCode:%d"),err);
|
|
}
|
|
}
|
|
|
|
static void stop_dma(analogbufio_bufferedin_obj_t *self) {
|
|
adc_digi_stop();
|
|
adc_digi_deinitialize();
|
|
// Release ADC Pin
|
|
reset_pin_number(self->pin->number);
|
|
}
|
|
|
|
bool common_hal_analogbufio_bufferedin_deinited(analogbufio_bufferedin_obj_t *self) {
|
|
return self->pin == NULL;
|
|
}
|
|
|
|
void common_hal_analogbufio_bufferedin_deinit(analogbufio_bufferedin_obj_t *self) {
|
|
if (common_hal_analogbufio_bufferedin_deinited(self)) {
|
|
return;
|
|
}
|
|
self->pin = NULL;
|
|
}
|
|
|
|
static bool check_valid_data(const adc_digi_output_data_t *data, const mcu_pin_obj_t *pin, adc_digi_convert_mode_t convert_mode, adc_digi_output_format_t output_format) {
|
|
unsigned int unit = data->type2.unit;
|
|
if (output_format == ADC_DIGI_OUTPUT_FORMAT_TYPE2) {
|
|
if (data->type2.channel >= SOC_ADC_CHANNEL_NUM(unit)) {
|
|
return false;
|
|
}
|
|
if (pin->adc_channel != data->type2.channel) {
|
|
return false;
|
|
}
|
|
} else {
|
|
if (convert_mode == ADC_CONV_SINGLE_UNIT_1) {
|
|
unit = 0;
|
|
} else {
|
|
unit = 1;
|
|
}
|
|
#if defined(CONFIG_IDF_TARGET_ESP32) || defined(CONFIG_IDF_TARGET_ESP32S2)
|
|
if (data->type1.channel >= SOC_ADC_CHANNEL_NUM(unit)) {
|
|
return false;
|
|
}
|
|
if (pin->adc_channel != data->type1.channel) {
|
|
return false;
|
|
}
|
|
#endif
|
|
}
|
|
if (unit > 2) {
|
|
return false;
|
|
}
|
|
return true;
|
|
}
|
|
|
|
uint32_t common_hal_analogbufio_bufferedin_readinto(analogbufio_bufferedin_obj_t *self, uint8_t *buffer, uint32_t len, uint8_t bytes_per_sample) {
|
|
uint8_t result[NUM_SAMPLES_PER_INTERRUPT] __attribute__ ((aligned(4))) = {0};
|
|
uint32_t captured_samples = 0;
|
|
uint32_t captured_bytes = 0;
|
|
esp_err_t ret;
|
|
uint32_t ret_num = 0;
|
|
adc_digi_convert_mode_t convert_mode = ADC_CONV_SINGLE_UNIT_2;
|
|
adc_digi_output_format_t output_format = ADC_DIGI_OUTPUT_FORMAT_TYPE1;
|
|
|
|
if (bytes_per_sample != 2) {
|
|
mp_raise_ValueError_varg(translate("%q must be a array of type 'H'"), MP_QSTR_buffer);
|
|
}
|
|
|
|
start_dma(self, &convert_mode, &output_format);
|
|
|
|
#if defined(DEBUG_ANALOGBUFIO)
|
|
mp_printf(&mp_plat_print,"Required bytes: %d\n",len);
|
|
#endif // DEBUG_ANALOGBUFIO
|
|
|
|
while (captured_bytes < len) {
|
|
ret_num = 0;
|
|
ret = adc_digi_read_bytes(result, NUM_SAMPLES_PER_INTERRUPT, &ret_num, ADC_READ_TIMEOUT_MS);
|
|
|
|
if (ret == ESP_OK) {
|
|
for (uint32_t i = 0; i < ret_num; i += ADC_RESULT_BYTE) {
|
|
adc_digi_output_data_t *pResult = (adc_digi_output_data_t *)(void *)&result[i];
|
|
if (check_valid_data(pResult, self->pin, convert_mode, output_format)) {
|
|
if (captured_bytes < len) {
|
|
uint16_t *pBuffer = (uint16_t *)(void *)&buffer[captured_bytes];
|
|
if (output_format == ADC_DIGI_OUTPUT_FORMAT_TYPE1) {
|
|
#if defined(CONFIG_IDF_TARGET_ESP32) || defined(CONFIG_IDF_TARGET_ESP32S2)
|
|
*pBuffer = pResult->type1.data;
|
|
#endif
|
|
} else {
|
|
*pBuffer = pResult->type2.data;
|
|
}
|
|
captured_bytes += sizeof(uint16_t);
|
|
captured_samples++;
|
|
} else {
|
|
stop_dma(self);
|
|
return captured_samples;
|
|
}
|
|
} else {
|
|
#if !defined(CONFIG_IDF_TARGET_ESP32C3)
|
|
// For all chips except for ESP32C3 we would receive samples only from one unit
|
|
// For ESP32C3 we may receive sample from alternating units and need to ignore them
|
|
#if defined(DEBUG_ANALOGBUFIO)
|
|
mp_printf(&mp_plat_print,"Invalid sample received: 0x%x\n",pResult->val);
|
|
#endif // DEBUG_ANALOGBUFIO
|
|
stop_dma(self);
|
|
return captured_samples;
|
|
#endif
|
|
}
|
|
}
|
|
} else if (ret == ESP_ERR_TIMEOUT) {
|
|
#if defined(DEBUG_ANALOGBUFIO)
|
|
mp_printf(&mp_plat_print,"ADC Timeout\n");
|
|
#endif // DEBUG_ANALOGBUFIO
|
|
stop_dma(self);
|
|
return captured_samples;
|
|
} else {
|
|
#if defined(DEBUG_ANALOGBUFIO)
|
|
mp_printf(&mp_plat_print,"adc_digi_read_bytes failed error code:%d\n",ret);
|
|
#endif // DEBUG_ANALOGBUFIO
|
|
stop_dma(self);
|
|
return captured_samples;
|
|
}
|
|
}
|
|
|
|
stop_dma(self);
|
|
#if defined(DEBUG_ANALOGBUFIO)
|
|
mp_printf(&mp_plat_print,"Captured bytes: %d\n",captured_bytes);
|
|
#endif // DEBUG_ANALOGBUFIO
|
|
return captured_samples;
|
|
}
|