Changes:
* New faster filter loop, by @ladyada. New filter coefficients as well.
* Turn on microphone clock when PDMIn object is created, and run it all the time, so the user code doesn't have to wait for microphone startup, which can be 10ms or even 100ms.
* Wait for microphone startup when PDMIn is first created, based on new optional parameter microphone_startup in seconds (takes a float).
* record() returns number of samples actually recorded, so you can see if it's not keeping up.
* Fix buffer overflow errors when buffer size was not a multiple of 16 or something like that.
* Tweak a few peripheral settings.
* Minimum sampling frequency is now 16kHZ or so, because 8kHz runs microphone at only 0.5MHz, which is too slow for many mics.
Note: I tried 128x oversampling instead of 64x, but the code cannot keep up at 24kHz or above sampling. 128x would reduce the high-frequency noise by 6db.
- Added D4 and moved associated SD_CS so that they are paired within list
- Added D7 and SD_CD which is the SD Card Detect pin
- Added D8 and GREEN_LED
- Added RED_LED associated with D13
- Added Setup information regarding arm complier packages
This is a C module with some low-level functions required for the
CircuitPython "stage" library. It provides support for fast
rendering of tile grids and sprites on SPI-based RGB displays.
This is a board definition for the uGame project:
https://hackaday.io/project/27629-game
uGame is a small handheld game console programmable with
CircuitPython. The hardware part of the project is pretty
much stable by now.
If a soft reset happens while the gamepad module is scanning for button
presses, there is a moment when the pins get de-initialized, but the
gamepad module is still trying to read them, which ends in a crash.
We can avoid it by disabling scanning on reset.
2. Add flag INTERNAL_LIBM to mpconfigboard.mk files to signal using lib/libm.
3. Fix floating-point warnings in lib/libm
4. Turn off -finline-limit, no longer needed due to 1.
5. Add explicit flags for SPI_FLASH_FILESYSTEM and INTERNAL_FLASH_FILESYSTEM
to mpconfigboard.mk files, so they don't need to know the name of the .c file
that implements those. Makefile takes care of checking the flags and including
the right files.
This saves a lot of RAM. Fixes#287.
Also fixed compilation of frozen_mpy.c to use supplied make rule rather than
builtin rule (supplied rule suppresses printing out the gcc command line).
`microcontroller.cpu.temperature` uses different ADC settings, and caused
AnalogIn to give wrong answers. AnalogIn can no longer assume it's the
only user of the ADC.
The frozen module `_boot.py` was not being loaded on restart
because `pyexec_frozen_module()` did not know about the new `.frozen`
pseudo-directory. Updated lower-level routine to look in the right place.
Also made ".frozen" and related values be `#define`s.
