Commit Graph

71 Commits

Author SHA1 Message Date
Damien George 13fcd8440e stm32: Add support for STM32H723 MCUs.
Signed-off-by: Damien George <damien@micropython.org>
2023-03-21 14:02:49 +11:00
brave ulysses 7f71057a89 stm32/boards/NUCLEO_F756ZG: Add board definition for NUCLEO-F756ZG.
Signed-off-by: Damien George <damien@micropython.org>
2022-12-15 14:59:26 +11:00
yn386 f6b5d1838b stm32/adc: Fix ADCAll.read_core_temp() on L4 MCUs.
TS_CAL1 and TS_CAL2 of STM32L4 are at VDDA=3.0V, so the reference
correction factor should be updated before reading tempsensor.
2022-11-18 14:46:14 +11:00
yn386 2154ee2163 stm32/adc: Fix reading internal ADC channels on L4 MCUs.
For STM32L4 series, the internal sensors are connected to:
- ADC1_IN0: Internal voltage reference
- ADC1_IN17: Temperature sensor
- ADC1_IN18: VBAT battery voltage monitoring
but ADC_CHANNEL_VREFINT, ADC_CHANNEL_VBAT, ADC_CHANNEL_TEMPSENSOR are not
defined as 0, 17, 18.

This commit converts channel 0, 17, 18 to ADC_CHANNEL_x in
adc_get_internal_channel().
2022-11-18 14:38:58 +11:00
yn386 427d72667f stm32: Add support for STM32L1 MCUs.
This change adds STM32L1 support to the STM32 port.
2022-09-25 23:56:41 +10:00
Jim Mussared 94beeabd2e py/obj: Convert make_new into a mp_obj_type_t slot.
Instead of being an explicit field, it's now a slot like all the other
methods.

This is a marginal code size improvement because most types have a make_new
(100/138 on PYBV11), however it improves consistency in how types are
declared, removing the special case for make_new.

Signed-off-by: Jim Mussared <jim.mussared@gmail.com>
2022-09-19 19:06:15 +10:00
Jim Mussared 9dce82776d all: Remove unnecessary locals_dict cast.
Signed-off-by: Jim Mussared <jim.mussared@gmail.com>
2022-09-19 19:06:01 +10:00
Jim Mussared 662b9761b3 all: Make all mp_obj_type_t defs use MP_DEFINE_CONST_OBJ_TYPE.
In preparation for upcoming rework of mp_obj_type_t layout.

Signed-off-by: Jim Mussared <jim.mussared@gmail.com>
2022-09-19 19:06:01 +10:00
yn386 8770cd2f4d stm32/adc: Make ADCAll.read_channel reject invalid channels.
pyb.ADC(channel) checks whether specified channel is valid or have ADC
capability but pyb.ADCAll().read_channel() does not.

This change adds checking whether specified channel is valid and throw
ValueError if channel is invalid.  This is same as pyb.ADC().
2022-09-06 15:22:16 +10:00
Tim Gates f736afb577 drivers,ports: Fix a few typos in comments.
Fixes:
- Should read `definitions` rather than `defintions`.
- Should read `resolution` rather than `resoultion`.
- Should read `inefficient` rather than `inefficent`.
- Should read `closed` rather than `closded`.

Signed-off-by: Tim Gates <tim.gates@iress.com>
2022-07-23 23:24:24 +10:00
Jim Mussared 0e7bfc88c6 all: Use mp_obj_malloc everywhere it's applicable.
This replaces occurences of

    foo_t *foo = m_new_obj(foo_t);
    foo->base.type = &foo_type;

with

    foo_t *foo = mp_obj_malloc(foo_t, &foo_type);

Excludes any places where base is a sub-field or when new0/memset is used.

Signed-off-by: Jim Mussared <jim.mussared@gmail.com>
2022-05-03 22:28:14 +10:00
Asensio Lorenzo Sempere 010012c7c3 stm32: Add support for G0 MCUs.
This commit adds support for the STM32G0 series of MCUs.

Signed-off-by: Asensio Lorenzo Sempere <asensio.aerospace@gmail.com>
2022-04-28 11:56:15 +10:00
Damien George 66fe3d5cb5 stm32: Support building for STM32F745.
Signed-off-by: Damien George <damien@micropython.org>
2022-03-22 16:01:09 +11:00
iabdalkader 31f2440388 stm32/adc: Remove obsolete FIRST/LAST GPIO channel macros. 2022-02-04 10:45:11 +11:00
iabdalkader e5df4a96fa stm32/adc: Fix L4 ADC channel numbers.
Use HAL macro to map decimal numbers to channel numbers.  This is needed
since updating L4 HAL v1.17.0 in a0f5b3148a.

Fixes issue #8233.
2022-02-04 10:42:38 +11:00
Herwin Grobben 8f68e26f79 stm32: Add support for G4 MCUs, and add NUCLEO_G474RE board defn.
This commit adds support for the STM32G4 series of MCUs, and a board
definition for NUCLEO_G474RE.  This board has the REPL on LPUART1 which is
connected to the on-board ST-link USB-UART.
2022-02-01 16:21:01 +11:00
Damien George 7e61a12eb1 stm32: Add support for F479 MCUs.
Signed-off-by: Damien George <damien@micropython.org>
2021-11-30 10:21:18 +11:00
Jan Staal 9e2423e730 stm32: Add support for H7A3(Q)/H7B3(Q), and STM32H73B3I_DK board defn.
This commit is based upon prior work of @dpgeorge and @koendv.

MCU support for the STM32H7A3 and B3 families MCUs:
- STM32H7A3xx
- STM32H7A3xxQ (SMPS)
- STM32H7B3xx
- STM32H7B3xxQ (SMPS)

Support has been added for the STM32H7B3I_DK board.

Signed-off-by: Jan Staal <info@janstaal.com>
2021-09-16 12:29:28 +10:00
Jan Hrudka d451dc0086 stm32: Add basic support for STM32H750. 2021-09-15 10:42:20 +10:00
Damien George 86ef965352 stm32/adc: Simplify and generalise how pin_adcX table is defined.
The ADC_FIRST_GPIO_CHANNEL and ADC_LAST_GPIO_CHANNEL macros are no longer
needed.  Instead the pin_adcX table (X = 1, 2, 3) is now generated to be
the exact size needed for a given MCU, and MP_ARRAY_SIZE(pin_adcX) is used
to determine the upper bound.

This commit also allows CPU pins to be excluded from ADC configuration if
they are hidden by prefixing their name with a "-".

Signed-off-by: Damien George <damien@micropython.org>
2021-07-05 16:03:11 +10:00
iabdalkader 0e11966ce9 stm32/adc: Define the ADC instance used for internal channels. 2021-07-02 23:33:51 +10:00
iabdalkader ff7be31f26 stm32/adc: Allow using ADC12 and ADC3 for H7.
* Modify common functions in adc.c to accept ADC handle.
* Most external channels are connected to ADC12 which is used by default.
* For ADCAll (internal channels) ADC3 is used instead.
* Issue #4435 is possibly related (at least partially fixed).
2021-07-02 23:33:51 +10:00
Damien George 80883a82c0 stm32/adc: Deselect VBAT after reading to prevent battery drain.
Signed-off-by: Damien George <damien@micropython.org>
2020-12-18 13:32:02 +11:00
Damien George 5210fc51ec stm32/adc: Add support to pyb.ADC for STM32WB MCUs. 2020-06-02 10:48:49 +10:00
Thomas Roberts d7399679de stm32: Add support for F412 MCUs. 2020-05-15 10:08:30 +10:00
stijn bcf01d1686 all: Fix implicit conversion from double to float.
These are found when building with -Wfloat-conversion.
2020-04-18 22:42:24 +10:00
Jim Mussared def76fe4d9 all: Use MP_ERROR_TEXT for all error messages. 2020-04-05 15:02:06 +10:00
Damien George 1a3e386c67 all: Remove spaces inside and around parenthesis.
Using new options enabled in the uncrustify configuration.
2020-03-28 23:36:44 +11:00
Damien George 69661f3343 all: Reformat C and Python source code with tools/codeformat.py.
This is run with uncrustify 0.70.1, and black 19.10b0.
2020-02-28 10:33:03 +11:00
Damien George ad7213d3c3 py: Add mp_raise_msg_varg helper and use it where appropriate.
This commit adds mp_raise_msg_varg(type, fmt, ...) as a helper for
nlr_raise(mp_obj_new_exception_msg_varg(type, fmt, ...)).  It makes the
C-level API for raising exceptions more consistent, and reduces code size
on most ports:

   bare-arm:   +28 +0.042%
minimal x86:  +100 +0.067%
   unix x64:   -56 -0.011%
unix nanbox:  -300 -0.068%
      stm32:  -204 -0.054% PYBV10
     cc3200:    +0 +0.000%
    esp8266:   -64 -0.010% GENERIC
      esp32:  -104 -0.007% GENERIC
        nrf:  -136 -0.094% pca10040
       samd:    +0 +0.000% ADAFRUIT_ITSYBITSY_M4_EXPRESS
2020-02-13 11:52:40 +11:00
iabdalkader 6e4468a2ab stm32/adc: Fix sampling for internal channels on H7 MCUs.
Set to 810 cycles following HAL examples.
2019-10-15 22:08:45 +11:00
iabdalkader 4cee42d864 stm32/adc: Use IS_CHANNEL_INTERNAL macro to check for internal channels. 2019-10-15 22:08:36 +11:00
iabdalkader d523a377d1 stm32/adc: Remove unused macro and channel check, and fix spacing.
The call to is_adcx_channel is redundant because the channel is already
checked just before calling adc_init_single in adc_make_new.
2019-10-15 22:04:19 +11:00
iabdalkader cb2b210d45 stm32/adc: Update ADC driver to work with the new H7 HAL.
Use NB_TO_CHANNEL to map decimal numbers to channel numbers.  And use the
correct rank to initialize channels (ADC_REGULAR_RANK_1).
2019-10-15 22:03:54 +11:00
Chris Mason 0096041c99 stm32/{adc,machine_adc}: Change ADC clock and sampling time for F0 MCUs.
STM32F0 has PCLK=48MHz and maximum ADC clock is 14MHz so use PCLK/4=12MHz
to stay within spec of the ADC peripheral.  In pyb.ADC set common sampling
time to approx 4uS for internal and external sources.  In machine.ADC
reduce sample time to approx 1uS for external source, leave internal at
maximum sampling time.
2019-10-04 21:39:17 +10:00
Chris Mason 64181b5f76 stm32: Add support for STM32L452 MCUs. 2019-07-08 16:50:19 +10:00
Damien George 73e8b7e0e4 stm32: Update components to work with new H7xx HAL. 2019-07-03 23:40:49 +10:00
Damien George 1f63e9b701 stm32/adc: Fix VBAT_DIV to be 4 for STM32F411.
Fixes issue #4794.
2019-05-20 14:37:28 +10:00
Chris Mason 1b956ec817 stm32: Add support for F413 MCUs.
Includes:
- Support for CAN3.
- Support for UART9 and UART10.
- stm32f413xg.ld and stm32f413xh.ld linker scripts.
- stm32f413_af.csv alternate function mapping.
- startup_stm32f413xx.s because F413 has different interrupt vector table.
- Memory configuration with: 240K filesystem, 240K heap, 16K stack.
2019-05-02 16:26:53 +10:00
Damien George 6e30f96b0b ports: Convert legacy uppercase macro names to lowercase. 2019-02-12 14:54:51 +11:00
Damien George 43a894fb48 stm32/adc: Add basic support for ADC on a pin on STM32H7 MCUs. 2019-02-06 13:35:28 +11:00
Damien George 1db55381b6 stm32/adc: Support 16-bit ADC configuration on H7 MCUs. 2018-12-12 12:51:46 +11:00
Damien George 6cab8daee0 stm32/adc: Increase ADC sampling time for internal sources on H7 MCUs. 2018-12-12 12:51:26 +11:00
Damien George 0555ada277 stm32/adc: Fix calibrated volt/temp readings on H7 by using 16bit scale. 2018-12-12 12:50:37 +11:00
boochow 9d3372bded stm32: Add peripheral support for STM32L432.
The L432 does not have: GPIOD, TIM3, SPI2, ADC dual mode operation, 2-banks
flash.
2018-12-06 13:32:43 +11:00
Tobias Badertscher 9acc32b40f stm32/adc: Add ADC auto-calibration for L4 MCUs.
This increases the precision of the ADC.
2018-11-26 16:16:29 +11:00
Damien George cb3c66e793 stm32/adc: Increase sample time for internal sensors on L4 MCUs.
They need time (around 4us for VREFINT) to obtain accurate results.

Fixes issue #4022.
2018-09-20 23:51:33 +10:00
Damien George 3220cedc31 stm32/adc: Fix ADC calibration scale for L4 MCUs, they use 3.0V. 2018-09-20 23:50:54 +10:00
Andrew Leech 17f7c683d2 stm32: Add support for STM32F765xx MCUs.
This part is functionally similar to STM32F767xx (they share a datasheet)
so support is generally comparable.  When adding board support the
stm32f767_af.csv and stm32f767.ld should be used.
2018-09-20 15:16:03 +10:00
Damien George 7be5bb3672 stm32/adc: Fix ADC reading on F0 MCUs to only sample a single channel.
And increase sampling time to get better results for internal channels.
2018-08-04 13:33:02 +10:00