52bca95208
Refactor dotenv module so that it can be tested on host
...
.. it needs to operate on a FILE* rather than FIL depending on
the build.
Note that this is comparing output to expected, not to cpython dotenv
package. Because run-tests.py starts the CPython interpreter with the
'-S' (skip site initialization) flag, pip-installed packages are
not available for import inside a test file. Instead, the exp
file is generated manually:
```
circuitpython/tests$ python3 circuitpython/dotenv_test.py > circuitpython/dotenv_test.py.exp
```
Unfortunately, the test fails on test e15:
```diff
FAILURE /home/jepler/src/circuitpython/tests/results/circuitpython_dotenv_test.py
--- /home/jepler/src/circuitpython/tests/results/circuitpython_dotenv_test.py.exp 2022-10-04 09:48:16.307703128 -0500
+++ /home/jepler/src/circuitpython/tests/results/circuitpython_dotenv_test.py.out 2022-10-04 09:48:16.307703128 -0500
@@ -14,7 +14,7 @@
line
e13 e13value
e14 None
-e15 e15value
+e15 None
e16 #
e17 def
e18 #has a hash
```
2022-10-04 09:51:27 -05:00
2618e11002
use next update partition
2022-10-04 19:42:48 +05:30
9fe7308b88
conditionally add storage extension
2022-10-04 17:26:28 +05:30
7d8ff20dac
add initial storage extension support
2022-10-04 17:25:48 +05:30
02e115cbc2
Update mpconfigboard.mk
2022-10-04 00:03:59 -05:00
330b96726a
add newlines to end of files
2022-10-04 04:56:31 +00:00
5268ef01c9
Utilize VID/PID from native USB port
2022-10-03 23:45:28 -05:00
cffc1bfcab
sdkconfig didn't get committed for some reason...
2022-10-03 22:54:31 -05:00
a948dc399b
add esp32-s2-devkitc-1-n8r2 variant
2022-10-04 03:51:51 +00:00
90f6096955
fix ai-thinker creation ids; fix some typos elsewhere
2022-10-03 15:29:03 -04:00
ad79f595a5
Merge pull request #6974 from MicroDev1/patch
...
Couple Minor Fixes
2022-10-01 13:12:01 -04:00
7bb90dbf45
remove redundant port/*/.gitignore; cleanup others
2022-10-01 11:52:36 -04:00
40c2de833d
doc improvements
2022-10-01 10:09:33 -05:00
d3e85d165e
Set cyw43 power management as needed, default to disabled
...
.. the value actually needs to be enforced each time the STA or AP
is enabled, because internally there's a call to cyw43_wifi_pm with the
library's defaut power management value, not ours.
Add a getter, though it only returns our idea of what the power
management register is set to, it doesn't read out from the actual
hardware, sadly.
2022-10-01 08:20:34 -05:00
943b992bfc
Improve cyw43.set_power_management documentation
...
.. and provide 4 preset values
2022-10-01 07:52:08 -05:00
7eaeca4eb3
update espressif port's .gitignore
2022-10-01 09:14:48 +05:30
f9e655da47
Merge pull request #6962 from dhalbert/espressif-deep-sleep-hold-pins
...
Espressif: do not hold pins during deep sleep if not necessary
2022-09-30 22:20:44 -04:00
bced76887e
Merge pull request #6973 from jepler/rp2040-fix-warnings
...
Rp2040 fix warnings
2022-09-30 16:21:31 -04:00
c02602ace1
Enable strict-overflow diagnostic
2022-09-30 11:19:23 -05:00
afc1c0e3bb
Fix unused variable diagnostics, make it a fatal error
2022-09-30 11:19:22 -05:00
37620d4eb0
Fix several classes of compiler diagnostic & make fatal
...
* -Wno-nested-externs
* -Wno-strict-prototypes
* -Wno-double-promotion
* -Wno-sign-compare
2022-09-30 11:19:22 -05:00
c6eef3931f
Enable warning for unused static functions
2022-09-30 11:19:22 -05:00
2c9c6fc80e
Remove unused static functions
2022-09-30 11:19:21 -05:00
907c5d387f
Tweak black_bindings
...
Originally, black_bindings found each contiguous "//|" block and sent
it to black independently. This was slower than it needed to be.
Instead, swap the comment prefix: when running black, take off
"//|" prefixes and put "##|" prefixes on all un-prefixed lines.
Then, after black is run, do the opposite operation
This more than doubles the overall speed of "pre-commit run --all",
from 3m20s to 55s CPU time on my local machine (32.5s to under 10s
"elapsed" time)
It also causes a small amount of churn in the bindings, because
black now sees enough context to know whether one 'def' follows another
or ends the 'def's in a 'class'. In the latter case, it adds an extra
newline, which becomes a "//|" line.
I'm less sure why a trailing comma was omitted before down in
rp2pio/StateMachine.c but let's roll with it.
2022-09-30 11:18:13 -05:00
fcf7cfe838
Merge pull request #6960 from jepler/picow-server
...
Pico W: implement more things
2022-09-30 11:15:37 -05:00
0912889106
raspberrypi: statically allocate storage for hostname
2022-09-30 10:05:11 -05:00
84c7ac4a81
Make cyw43.set_power_management() be a function as intended
2022-09-30 07:56:59 -05:00
3281e14be1
fix reference to board module
2022-09-29 21:37:34 -05:00
4de9487820
It turns out you CAN have too many GPIO
2022-09-29 20:10:33 -05:00
9d1b12066d
Espressif: do not hold pins during deep sleep if not necessary
2022-09-29 20:11:48 -04:00
7af8a23ddf
Use macro for computing size of array.
2022-09-29 22:10:21 +02:00
3609c29b27
Update STM DFU mode software implementation.
...
- fix for sizeof array calculation.
- follow ARM recommendation to turn off interruptions with NVIC.
2022-09-29 21:15:51 +02:00
510bd11f58
Enable reading back value of cyw43 pin
...
Now, `led.value = not led.value` works as a way to toggle the LED state.
Closes : #6959
2022-09-29 11:06:11 -05:00
a3bcfd6911
Add pin_CYW1 for SMPS_MODE
2022-09-29 10:54:06 -05:00
72b06021c0
fix doc formatting
2022-09-29 10:27:13 -05:00
74cdf42ece
pico w: implement bind, listen, accept
...
this works with some simple tcp & udp echo service code
2022-09-29 10:02:20 -05:00
12ea04ca70
Add cyw43.set_power_management
2022-09-29 10:02:20 -05:00
91f1266db5
Document CywPin
2022-09-29 10:02:19 -05:00
56f9f0d136
add tx power get/set
2022-09-29 10:02:19 -05:00
71a00157ba
Add hostname setting
2022-09-29 10:02:19 -05:00
c6d3163841
remove comment about something the Makefile does now
2022-09-29 10:02:18 -05:00
db065a299f
Merge pull request #6933 from jepler/ 🥧 🐮
...
Implement a useful subset of `wifi` and `socketpool` modules on 🥧 🐮
2022-09-28 18:09:24 -04:00
2dd6df9d93
better to explain why this file has no useful content
2022-09-28 15:19:06 -05:00
72bce51ce3
restore submodule commits
2022-09-28 14:48:54 -05:00
3d76aa00f5
implementations not needed
2022-09-28 14:38:13 -05:00
09d4fbc557
Remove FIXME
...
this was verbatim-copied from micropython
2022-09-28 14:38:13 -05:00
6189156a0b
Add missing NotImplementedErrors
2022-09-28 14:38:12 -05:00
edf1efd728
Add CYW43 guards to more things
2022-09-28 14:38:12 -05:00
e100981d90
revert CFLAGS change
2022-09-28 14:38:12 -05:00
4380292848
comment why not actually reset wifi
2022-09-28 14:38:11 -05:00
ff7731491e
Implement enough of socketpool to do ntp and non-https requests
2022-09-28 10:06:34 -05:00
a7a1bd7880
Implement DNS resolution
...
```
>>> s = socketpool.SocketPool(wifi.radio)
>>> s.getaddrinfo("google.com", 80)
[(0, 0, 0, '', ('142.250.81.206', 80))]
```
2022-09-28 10:06:33 -05:00
6c3cdceb45
Implement scan, connect, ping
...
My pings go out, and then they come back
```py
import os
import wifi
import ipaddress
wifi.radio.connect(os.getenv('WIFI_SSID'), os.getenv('WIFI_PASSWORD'))
ipv4 = ipaddress.ip_address("8.8.4.4")
print("Ping google.com: %f ms" % (wifi.radio.ping(ipv4)*1000))
```
2022-09-28 10:06:33 -05:00
346fff2e7c
cyw43 basic gpio support, hwaddr in boot_out
2022-09-28 10:06:33 -05:00
22b04aef22
Reindent a block
2022-09-28 10:05:53 -05:00
9caa65cf28
allow a board to override link.ld
2022-09-28 10:05:53 -05:00
77fcb8a5a3
disable rainbowio on this arduino_nano_33_iot
...
The gpio changes took away enough code space that it doesn't fit.
2022-09-28 10:05:32 -05:00
39492b3403
Merge pull request #6951 from jepler/black-bindings
...
Black bindings
2022-09-27 17:57:07 -04:00
b2cc8d2aad
run black_bindings across all bindings
2022-09-27 15:21:42 -05:00
4e96667d50
Manual fix for oddball cases
2022-09-27 15:19:32 -05:00
ea5e4b20b0
Add more spacing for aliased pins.
2022-09-27 15:50:30 -04:00
9c4c7241d0
Update pin order to match silk.
2022-09-27 15:24:07 -04:00
96a83ecbfe
Update mpconfigboard.h
2022-09-26 19:58:33 +02:00
e626502fd2
Add USB VID and PID from STM.
2022-09-26 19:45:33 +02:00
2bd2406d13
Update license info and remove redundant board functions.
2022-09-26 19:39:07 +02:00
8754a6ec53
Add circuitpython support for STM Nucleo-F446RE.
2022-09-26 19:12:42 +02:00
de80db681f
Merge pull request #6915 from dhalbert/ringbuf-cleanup
...
ringbuf cleanup
2022-09-25 17:50:21 -04:00
1c8e12660c
Merge pull request #6944 from Neradoc/doc-fix-usb-cdc
...
docs: usb_cdc.Serial.readinto has no nbytes parameter
2022-09-25 13:35:58 -05:00
e25c195b78
fix broadcom UART ringbuf init
2022-09-25 09:12:23 -04:00
5346b89b08
don't use @property in docs, just document as a property
2022-09-25 07:18:18 +02:00
d44edc4a0c
Merge pull request #6937 from jepler/issue6839
...
Use new unique ID for this board
2022-09-24 23:55:06 -04:00
f12136af7f
esp32-camera: sync doc with code.
...
Closes : #6836
2022-09-23 08:54:00 -05:00
5bbbca4d44
lock and unlock i2c bus around any ops that might access it
2022-09-22 17:03:05 -05:00
a769beed3f
Use new unique ID for this board
2022-09-22 16:23:38 -05:00
ea15a9118a
ringbuf cleanup
2022-09-21 10:03:05 -04:00
c567b43441
add CIRCUITPY_USB_IDENTIFICATION to turn off on smallest builds
2022-09-20 14:32:38 -04:00
745d83adac
DFU mode implementation for STM32F4 MCU.
2022-09-18 18:24:38 +02:00
1091d51af2
Merge pull request #6918 from UnexpectedCircuitPython/main
...
Added support for Unexpected Maker TinyPICO (V2/V3) and TinyPICO Nano
2022-09-17 21:39:17 -04:00
268b3f0dde
Added support for Unexpected Maker TinyPICO (V2/V3) and TinyPICO Nano boards using ESP32-PICO-D4
2022-09-18 09:49:30 +10:00
b2ffda219a
updated a pin definition
2022-09-17 16:53:24 -04:00
8a568d18b5
Merge pull request #6757 from latkinso42/adcdma
...
analogbufio
2022-09-16 08:32:24 -04:00
4a69dfa50c
Merge pull request #6907 from dhalbert/preserve-pins-on-deep-sleep
...
allow preserving pin state during deep sleep
2022-09-16 17:52:04 +05:30
f994b11d52
Merge pull request #6909 from dhalbert/fesp32s2tft-remove-unneeded-code
...
Remove unneeded workaround for Feather ESP32-S2 TFT
2022-09-16 10:18:13 +05:30
7914870f9a
Merge pull request #6908 from dhalbert/nrf-busio-none-empty-uart-read
...
nrf: return None when UART.read() reads nothing
2022-09-15 22:12:06 -04:00
6bb47038d5
Merge remote-tracking branch 'adafruit/main' into adcdma
2022-09-15 20:42:51 -04:00
0ab4f12dc4
fix some submodules commit skew
2022-09-15 20:36:29 -04:00
82694b7265
remove extraneous copyrights
2022-09-15 20:31:08 -04:00
4df8a51982
Remove unneeded workaround for Feather ESP32-S2 TFT
2022-09-15 20:06:47 -04:00
3abfd212ec
nrf: return None when UART.read() reads nothing
2022-09-15 19:40:02 -04:00
60f43b1703
allow preserving pin state during deep sleep
2022-09-15 17:35:14 -04:00
56c5f1eedf
Add BananaPi BPI-Leaf-S3.
...
Based on esp32s3, all available pins are drawn.
2M PSRAM, 8M FLASH.
A JST SH 4-pin Connector can be used for STEMMA QT / Qwiic.
A MX 1.25mm 2-Pin Connector Lithium battery power supply.
A WS2812 LED.
2022-09-15 14:18:24 +08:00
14fc4a0797
Merge pull request #6898 from dhalbert/espressif-pwmout-reset
...
Espressif pwmout reset fixes
2022-09-14 18:47:05 -04:00
ae64f9fd78
Merge pull request #6899 from BPI-STEAM/CircuitPython-main-BPI-BIT-S2-PR
...
Add BananaPi BPI-Bit-S2 .
2022-09-13 23:02:46 -04:00
6f4cc611ed
Add BananaPi BPI-Bit-S2 .
...
Adds support for the BananaPi BPI-Bit-S2 Boards.
Based on esp32s2 chip.
With 25 ws2812 LEDs, 1 buzzer, 2 photosensitive sensors, 1 thermosensitive sensor,
2 buttons on the front, 1 reset button and 1 boot button on the back.
2022-09-14 10:21:23 +08:00
d2f28eb980
Merge pull request #6887 from RetiredWizard/Broadcom-UART
...
Enable CIRCUITPY_CONSOLE_UART by default on Broadcom boards
2022-09-13 14:35:16 -04:00
2b25a5d574
update esp32-camera
2022-09-13 13:16:37 -04:00
14adfb16dd
avoid pwmout_reset() workaround by reordering in main(); remove unnecessary never-resets
2022-09-12 21:32:21 -04:00
d0d10179c2
fix logic in pwmout_reset()
2022-09-12 17:03:45 -04:00
c157f1cb39
Cast pin_number to int8_t so that it can be used with switch-case.
2022-09-12 18:56:15 +08:00
0ae015e4d9
Removed whitespaces.
2022-09-12 18:25:27 +08:00
aaa2be1200
Set the default pin state for GPIOs to pull down.
2022-09-12 18:19:33 +08:00
36221bd749
update board microdev_micro_c3
2022-09-11 13:31:38 +05:30
14b604f48c
Add LED pin definition to Zero 2W board
2022-09-10 23:18:25 -04:00
28756936d5
Add HW_LED_STATUS pin to Zero 2W board
2022-09-10 23:17:02 -04:00
38a0ca324e
Uses different pins for RX/TX
2022-09-10 21:48:10 -04:00
f4eb618598
Define CIRCUITPY_CONSOLE_UART_TX/RX
2022-09-10 21:42:41 -04:00
1bdf9fca40
Define CIRCUITPY_CONSOLE_UART_TX/RX
2022-09-10 21:40:31 -04:00
1d03d73c13
Define CIRCUITPY_CONSOLE_UART_TX/RX
2022-09-10 21:39:51 -04:00
29e0aba72f
Define CIRCUITPY_CONSOLE_UART_TX/RX
2022-09-10 21:39:03 -04:00
fb4062d23f
Define CIRCUITPY_CONSOLE_UART_TX/RX
2022-09-10 21:38:16 -04:00
72c479efe6
Define CIRCUITPY_CONSOLE_UART_TX/RX
2022-09-10 21:37:31 -04:00
a892af8d77
Define CIRCUITPY_CONSOLE_UART_TX/RX
2022-09-10 21:36:41 -04:00
7708f19ec8
Define CIRCUITPY_CONSOLE_UART_TX/RX
2022-09-10 21:36:01 -04:00
0913e3a148
Define CIRCUITPY_CONSOLE_UART_TX/RX
2022-09-10 21:34:45 -04:00
ecb74aa652
Remove CIRCUITPY_CONSOLE_UART_TX/RX
2022-09-10 21:33:29 -04:00
8cd4b9fc04
fix espressif run modes
2022-09-10 18:08:09 +05:30
2fbb3090e2
Changed the pins assignment.
2022-09-09 16:50:14 +08:00
f279a2dbb2
Merge branch 'adafruit:main' into adcdma
2022-09-08 11:46:01 -04:00
dd37c81136
Merge pull request #6847 from dhalbert/status-bar-control
...
Allow enabling and disabling of status bar
2022-09-08 10:48:36 -04:00
58b00467c4
Merge pull request #6878 from dhalbert/weak-board-defs
...
Use MP_WEAK for default board.c routines
2022-09-08 10:47:08 -04:00
4cb69a51d5
Use MP_WEAK for default board.c routines
2022-09-08 07:36:50 -04:00
c1f57c6ceb
Pushing for resolution
2022-09-07 18:53:35 -04:00
328138225b
Merge pull request #6868 from PontusO/main
...
Added challenger_rp2040_wifi_ble board
2022-09-07 18:36:52 -04:00
6c4f352533
Fixed incorrect IO naming for ProS3 and FeatherS3
2022-09-07 19:51:45 +10:00
25078a24a3
Attempt to fix Build-Docs and Pre-Commit
2022-09-06 18:58:57 -04:00
c043c437f7
Merge branch 'main' of https://github.com/PontusO/circuitpython
2022-09-06 09:37:25 +02:00
9a937e6ea3
Added challenger_rp2040_wifi_ble board.
2022-09-06 09:37:21 +02:00
5498b3ac91
fix to analogbufio BufferedIn.h
2022-09-05 14:22:08 -04:00
a09836eb4a
Merge pull request #6681 from PontusO/main
...
Adds support for the Challenger RP2040 SubGHz board
2022-09-05 10:01:51 -07:00
a1856ea3e9
Renaming module from adcbuffer to analogbufio
2022-09-05 12:11:49 -04:00
478b40ecf9
Merge branch 'adcdma' of https://github.com/latkinso42/circuitpython into adcdma
...
Syncing with remote
2022-09-04 16:07:37 -04:00
3cd8259a78
Merge branch 'adafruit:main' into adcdma
2022-09-04 15:59:20 -04:00
d7a1db5b87
Changes per review
2022-09-04 15:57:59 -04:00
14498f793d
Merge pull request #6859 from wemos/s3_cpython
...
Add LOLIN S3 ESP32-S3 board.
2022-09-04 13:10:52 -04:00
ca7fb6dede
removal of sda-scl and add "GP" to 40,41
2022-09-04 18:05:50 +03:00
e1891038c8
Forgor the one IO pin and sda-scl
2022-09-04 16:59:56 +03:00
449b43e5a6
Merge pull request #6863 from jepler/rp2pio-erroneous-mask
...
rp2pio: fix occasional bug when not using OUT pins
2022-09-04 09:15:35 -04:00
a3e17189a4
rp2pio: fix occasional bug when not using OUT pins
...
a NULL first pin object is used to indicate that there are zero
of some kind of pin associated with the StateMachine. However,
mask_and_rotate wasn't checking for zero. It actually read data from
near address 0x0 and (in my case) got a nonzero mask, which then
caused a program with GPIO11 and GPIO12 as input with pull-up and no
out pins to erroneously encounter the error "pull masks conflict with
direction masks"
2022-09-03 20:39:42 -05:00
3a18d285a2
Add LOLIN S3 ESP32-S3 board.
2022-09-03 11:06:51 +08:00
6fe2ea4513
Merging back with updated main files
2022-09-02 15:51:45 -04:00
59fb3fbbd6
Merge branch 'adafruit:main' into main
2022-09-01 10:35:13 +02:00
52080e24eb
status bar control
2022-08-30 15:23:44 -04:00
3ba385ff5c
Merge pull request #6794 from jepler/esp32-camera-error-checking
...
Esp32 camera error checking
2022-08-30 11:41:42 -04:00
371e544a92
Merge pull request #6823 from pypewpew/ugame10-fix
...
Fix ugame.py for the ugame10 board
2022-08-29 12:34:02 -04:00
2c6f57be5e
Update ports/espressif/common-hal/esp32_camera/Camera.c
...
Co-authored-by: Mark <56205165+gamblor21@users.noreply.github.com>
2022-08-28 16:46:50 -05:00
04af01a672
Pin Validation fixed/readmultiple return fixed
2022-08-27 14:47:12 -04:00
0a0c03c3d2
Fix ugame.py for the ugame10 board
...
It was still trying to use the gamepad module, and there was a typo
2022-08-26 17:07:44 +02:00
ebd58155f2
bump pico-sdk to 1.4.0
2022-08-26 09:54:16 -05:00
dc27fb967d
error at runtime if no psram actually reserved
2022-08-26 09:27:50 -05:00
9f22e75e5e
error if camera is configured but no psram
2022-08-26 09:27:50 -05:00
8ed6a6135a
Disable camera on boards without psram
2022-08-26 09:27:50 -05:00
83838fc4fd
Merge pull request #6798 from DavePutz/issue_6735
...
Fix handling of zero-length pulseout pulse
2022-08-25 07:49:28 -04:00
37b6079c05
Merge branch 'adcdma' of https://github.com/latkinso42/circuitpython into adcdma
...
Reconciling remote updates
2022-08-24 21:46:28 -04:00
55c0404d85
Merge branch 'adafruit:main' into adcdma
2022-08-24 21:07:12 -04:00
6fd08483e2
Tidying code for PR/ Minor Issues
2022-08-24 17:41:51 -04:00
c00a630f50
Update PulseOut.c
...
reorder the tests for zero-length
2022-08-23 15:58:27 -05:00
3daebb36c3
Fix handling of zero-length pulseout pulse
2022-08-23 15:17:54 -05:00
6572f85913
Merge pull request #6779 from dhalbert/matrixportal-more-ram
...
matrixportal: remove ulab to make room to freeze portalbase
2022-08-23 09:41:36 -06:00
e23b621d69
Fixing 8 bit and 12 bit conversion
2022-08-22 18:55:55 -04:00
f5655dd48c
Fixing Build errors/ DMA Xfer Rate
2022-08-21 11:44:40 -04:00
68671399d1
More formating
2022-08-19 10:51:13 -04:00
d3c3c9eac4
Tidy a few things
2022-08-18 19:10:16 -04:00
f91af513b7
Introduced odule adcbuffer / removed analogio/AnalogFastIn
2022-08-18 16:23:17 -04:00
0c87d0b40d
matrixportal: remove ulab instead of bleio HCI
2022-08-18 10:23:37 -04:00
34b8fbaf14
Merge branch 'adafruit:main' into adcdma
2022-08-18 09:08:10 -04:00
2664d3766d
matrixportal: remove BLEIO HCI to make room to freeze portalbase
2022-08-18 07:43:31 -04:00
23f2b62196
Add the Solder Party BBQ20KBD board
2022-08-17 20:44:23 +02:00
2f0e209eca
Merge pull request #6772 from dhalbert/esp32-touch-fix
...
Fix ESP32 touch; rework common code a bit
2022-08-17 10:24:22 -07:00
2bc8d73776
Fix ESP32 touch; rework common code a bit
2022-08-16 20:04:27 -04:00
4b1d1fd72d
Merge pull request #6768 from mayrhomar/main
...
Add Waveshare ESP32-S2-Pico-LCD
2022-08-16 09:50:46 -07:00
3fbddfde59
Merge pull request #6758 from gamblor21/rp2040_i2ctarget
...
Rp2040 i2ctarget support
2022-08-15 13:57:49 -07:00
528da05f54
Add Waveshare ESP32-S2-Pico-LCD
2022-08-15 16:46:14 +02:00
4542c801b0
Tidying up loose endson draft PR
2022-08-14 13:03:33 -04:00
2f2ccdddbf
pycam rev b pins
2022-08-13 23:41:35 -04:00
7584363f66
Forgot an include
2022-08-13 17:41:45 -05:00
1ae2a2154e
Initial i2ctaret commit
2022-08-13 17:00:43 -05:00
fa3e265bfb
Merge pull request #6753 from tannewt/esp_led_reset
...
Audit all boards with LED pins defined
2022-08-13 15:25:02 +05:30
8cd12b2478
Copyright Change
2022-08-12 16:01:58 -04:00
81c7ba899d
Copyright Update/Acknowledgements
2022-08-12 13:57:45 -04:00
6d8e8c71fc
Merge branch 'adcdma' of https://github.com/latkinso42/circuitpython into adcdma
...
Fixing code behind commits
2022-08-11 17:58:46 -04:00
ce24469848
Merge branch 'adafruit:main' into adcdma
2022-08-11 17:57:01 -04:00
c3c1e307c4
Sample Rate Enhancements
2022-08-11 17:50:30 -04:00
df1435ae94
Audit all boards with LED pins defined
...
Add them as MICROPY_HW_LED_STATUS so that we can share reset code
for them. They aren't actually used for the status if another RGB
option is available. (But maybe they should be.)
Fixes #6717
2022-08-11 14:41:20 -07:00
5823bcc744
Merge branch 'main' into c3_short_send
2022-08-11 12:45:02 -07:00
f1053fb963
Introduce port_yield()
...
This allows the web workflow send code to yield briefly when
waiting for more room to send in a socket. Waiting for an "interrupt"
could wait forever because the select task only waits for read and
error. Adding wait on write is tricky because much of the time we
don't care if the sockets are ready to write. Using yield avoids
this trickiness.
2022-08-11 11:25:34 -07:00
5fb5fd0558
Merge branch 'adafruit:main' into adcdma
2022-08-10 18:33:52 -04:00
f9d724c09e
Fix retries after successful connection.
...
We may have set retries to 0 to enforce a timeout but the connect
succeeded. When it succeeds, we want to allow retries later in
case we lose signal briefly. (The callback will do this too but
the connect function will override it after.)
Also, remove extra code from websocket that is leftover from
debugging.
2022-08-10 15:24:08 -07:00
c2a45c1f27
Merge pull request #6739 from jepler/qrio-esp32camera
...
Enable qrio to work with rgb565 data, including byte-swapped data
2022-08-10 13:54:40 -05:00
7a5d2e81fc
Merge pull request #6734 from dhalbert/remove-autobrightness
...
Remove support for auto-brightness
2022-08-10 10:22:53 -07:00
86f9d98a5d
fix documentation of framebuffer_count
2022-08-10 11:12:54 -05:00
af64faae1e
switch back one I2C message
2022-08-10 12:06:43 -04:00
e778112710
Merge branch 'adafruit:main' into adcdma
2022-08-10 10:29:17 -04:00
9e0c580d3d
AnalogFastIn
2022-08-10 09:42:24 -04:00
198c8fea11
merge from upstream and fix espressif_esp32s3_eye
2022-08-10 08:43:08 -04:00
02cc6c2aee
Merge remote-tracking branch 'adafruit/main' into remove-autobrightness
2022-08-10 08:35:53 -04:00
138c92f035
Merge pull request #6727 from dhalbert/restore-deleted-modules
...
restore rainbowio and onewireio to a number of boards
2022-08-09 21:44:26 -07:00
41bcd7b260
Remove support for auto-brightness
2022-08-09 22:40:21 -04:00
59b4353282
Merge pull request #6713 from tannewt/exception_filename
...
Add exception filename to title bar
2022-08-09 16:59:12 -07:00
5040e1b7a5
Merge pull request #6684 from jepler/espressif-camera-2
...
Rewrite camera support for the Espressif port
2022-08-09 18:50:25 -05:00
db837e2b48
Merge pull request #6725 from dhalbert/esp-stack-size-16kB
...
increase main task stack size from 8kB to 16kB
2022-08-09 16:40:16 -07:00
Jeff Epler
microDev
Kyle Mohr
Dan Halbert
Dan Halbert
flom84
flom84
Kattni Rembor
flom_84
Neradoc
Seon Rozenblum
Paul Price
Wind-stormger
Kong Wai Weng
RetiredWizard
Lee Atkinson
Pontus Oldberg
Scott Shawcroft
bill88t
wemos
Radomir Dopieralski
DavePutz
arturo182
Martin
lady ada
gamblor21