Commit Graph

9595 Commits

Author SHA1 Message Date
Bill Sideris
f05c730a01
settable pystack = 0 for kicksat-sprite 2023-02-17 15:14:09 +02:00
Dan Halbert
bbadc00599
Merge pull request #7577 from dhalbert/safemode-py
Implement safemode.py
2023-02-16 14:15:20 -05:00
Dan Halbert
f79459cb70 Try -fweb -frename-registers to make more SAMD21 builds fit 2023-02-15 16:38:24 -05:00
Dan Halbert
fe40181144 Turn back on for pewpew_m4, turn off terminalio for incomplete fonts in pewpew_m4 2023-02-15 14:45:15 -05:00
MicroDev
32d86c3ea3
Merge pull request #7580 from adafruit/8.0.x
Merge 8.0.x up to main
2023-02-15 09:16:51 +05:30
MicroDev
48077daa7f
Merge pull request #7581 from gneverov/issue_7333
Add function common_hal_busio_uart_never_reset for rp2
2023-02-15 09:16:25 +05:30
Scott Shawcroft
0be53977f9
Merge pull request #7570 from RetiredWizard/broadcomNeopix
Broadcom pi zero2w neopixel misbehaving/crash fix
2023-02-14 09:56:18 -08:00
Gregory Neverov
98b61279e4 Add function common_hal_busio_uart_never_reset for rp2 2023-02-14 09:05:24 -08:00
Dan Halbert
0f099cdb31 Turn off safemode.py for pewpew_m4 2023-02-13 22:52:39 -05:00
Dan Halbert
c39a51527f Turn safemode.py off on non-external-flash SAMD21 builds 2023-02-13 21:48:03 -05:00
RetiredWizard
6ebb911a4d pre-commit formatting fix 2023-02-13 21:06:47 -05:00
RetiredWizard
09ccf2988d Replace bitwise or with boolean or 2023-02-13 21:04:11 -05:00
RetiredWizard
39d3d97ea4 Remove unnecessary memory barriers 2023-02-13 19:46:35 -05:00
Dan Halbert
d8231f1588 Implement safemode.py 2023-02-13 18:26:38 -05:00
RetiredWizard
dcb6955fa5 use boolean and symbols 2023-02-13 14:58:37 -05:00
RetiredWizard
791aefd388
Update ports/broadcom/common-hal/neopixel_write/__init__.c
Co-authored-by: Scott Shawcroft <scott@tannewt.org>
2023-02-13 14:44:54 -05:00
RetiredWizard
575f177dd0
Update ports/broadcom/common-hal/neopixel_write/__init__.c
Co-authored-by: Scott Shawcroft <scott@tannewt.org>
2023-02-13 14:44:46 -05:00
Scott Shawcroft
7d236f2782
Merge pull request #7547 from ajs256/add_sprig
Add new board hack_club_sprig
2023-02-13 10:25:04 -08:00
Pierre Constantineau
676cbb308d minor update to boards.c to fix mismatched number of LEDs causing LEDs not to be reset 2023-02-13 09:52:18 -06:00
Dan Halbert
ec90d79d61
Merge pull request #7553 from kamtom480/sdk2.6.0
spresense: update SDK to 2.6.0
2023-02-13 09:04:35 -05:00
RetiredWizard
1679790481 Tweaked to run without delays on zero w 2023-02-11 20:21:25 -05:00
RetiredWizard
359a27e166 Pre-commit is stubborn 2023-02-11 12:19:21 -05:00
RetiredWizard
2104708c58 missed a trailing space 2023-02-11 12:17:55 -05:00
RetiredWizard
f29cd4a836 Pre-commit fix trim trailing whitespace 2023-02-11 12:13:34 -05:00
RetiredWizard
a462a316bd Fix pre-commit formatting 2023-02-11 12:10:03 -05:00
RetiredWizard
a2bbca1428 Broadcom Raspberry Pi Zero2W neopixel timing fix
These changes result in working neopixel functionality. I've tested on
both the zero2w and the pi4b (The 4b didn't exhibit the original issue)
and the boards now behave properly with 1 to 30 pixels and the board hanging
no longer occurs.

Remove mod that didn't help during testing
Restoring back to original structure
Replace 2 microsecond delay w/deterministic loop
Remove unneded check for empty queue

Put transmit delay outside loop so Queue is used

Make sure last transmission is complete
2023-02-11 11:38:11 -05:00
Jeff Epler
b9f689adf4 Use lowest drive level for PIO 2023-02-08 16:18:58 -06:00
Alex
e78143a2f5
fix copyright header 2023-02-05 11:18:23 -08:00
Alex Sirota
07e8506b79 Add board hack_club_sprig 2023-02-03 20:19:11 -08:00
Jeff Epler
b03eed32fb espressif: i2sout: wait a short time to succesfully write data 2023-02-03 14:22:03 -06:00
Jeff Epler
41dff5d8cc espressif: i2sout: don't needlessly set sample rate
this may reduce glitches when starting samples
2023-02-03 14:22:03 -06:00
Jeff Epler
75ed28665c espressif: i2sout: enlarge buffers 2023-02-03 14:22:03 -06:00
Dan Halbert
f13e6d8758 update flash chip for Metro M7 1011 2023-02-03 11:56:42 -05:00
Dan Halbert
aafec496c3
Merge pull request #7539 from DavePutz/issue_7419
Correct assignment of RMT channels on ESP32C3
2023-02-02 17:35:37 -05:00
root
750535d4af Correct assignment of RMT channels on ESP32C3 2023-02-02 14:55:57 -06:00
Gregory Neverov
77c6daf4b8 don't throw exception 2023-02-01 16:33:22 -08:00
Kamil Tomaszewski
3fdebd4f60 spresense: Add HDR camera support 2023-02-01 12:37:29 +01:00
MicroDev
d9d94eacca
run updated pre-commit 2023-02-01 13:38:41 +05:30
Dan Halbert
9ab0733a28
Merge pull request #7530 from BrainBoardz/main
BrainBoardz Neuron Commit (Final I Hope!) - Updated as Per Previous Instructions VID+PID Work
2023-01-31 23:33:34 -05:00
brainboardz
2656ccffe4 Commit01-31 2023-01-31 19:35:57 -05:00
Dan Halbert
2faa8a435a
Merge pull request #7510 from BPI-STEAM/CircuitPython-main
Update mpconfigboard.h  with LED definition for BPI-Bit-S2.
2023-01-31 16:08:10 -05:00
Scott Shawcroft
e1041a8625
Merge pull request #7509 from RetiredWizard/seeedc3
seeed_xiao_esp32c3 flash mode change to dio
2023-01-31 11:29:24 -08:00
Jeff Epler
b8d6f20308
Add front buttons as D0/1/2, matching the silk 2023-01-31 10:02:21 -06:00
brainboardz
f3b1ceeb81 Seventh Commit 2023-01-30 20:45:57 -05:00
brainboardz
f71b4bc018 Sixth Commit 2023-01-30 20:32:19 -05:00
brainboardz
e10816f34c Fifth Commit 2023-01-30 20:20:37 -05:00
brainboardz
3f3519e0ab Fourth Commit 2023-01-30 20:10:34 -05:00
brainboardz
7c525fdcb0 Third Commit 2023-01-30 19:54:11 -05:00
brainboardz
34f480d735 Second Commit 2023-01-30 19:03:57 -05:00
brainboardz
d6ebf1bf43 First commit 2023-01-30 17:12:21 -05:00