DavePutz
e7fc806034
Throw a NotImplementedError for time functions on boards without long ints
...
Fix for Issue #2812 . Instead of reporting a missing attribute for functions such as time.time() and time.mktime(); platforms that do not have long integer support will raise a NotImplementedError
2020-05-08 16:33:26 -05:00
dherrada
09530e5dc3
Did os, _pixelbuf, _pew
2020-05-08 16:03:39 -04:00
Kattni Rembor
a83d1d7b4b
Update wheel to colorwheel and fix RGB order.
2020-05-08 14:44:41 -04:00
Kattni Rembor
37e5ff7757
Update colorwheel from GRB to RGB.
2020-05-08 13:25:52 -04:00
dherrada
d750096bef
Did neopixel, network, nvm
2020-05-07 18:40:46 -04:00
dherrada
e31e9eeaa1
Did math, microcontroller, and multiterminal
2020-05-07 15:59:52 -04:00
dherrada
4f33a20d17
Added gamepad, gamepadshift, and i2cslave
2020-05-07 15:10:44 -04:00
dherrada
a3d5adb43c
Did _eve, fontio, framebufferio, and frequencyio
2020-05-07 11:56:46 -04:00
dherrada
2ebe3035df
Did board, digitalio, displayio
2020-05-07 10:54:09 -04:00
Daniel Pollard
84c806a4be
updated descriptions and build variable
2020-05-07 12:42:46 +10:00
spkuehl
af55af216a
Fix type in RTC documentation.
2020-05-06 14:11:11 -05:00
Sean Cross
b168784fa0
aesio: add basic AES encryption and decryption
...
This adds initial support for an AES module named aesio. This
implementation supports only a subset of AES modes, namely
ECB, CBC, and CTR modes.
Example usage:
```
>>> import aesio
>>>
>>> key = b'Sixteen byte key'
>>> cipher = aesio.AES(key, aesio.MODE_ECB)
>>> output = bytearray(16)
>>> cipher.encrypt_into(b'Circuit Python!!', output)
>>> output
bytearray(b'E\x14\x85\x18\x9a\x9c\r\x95>\xa7kV\xa2`\x8b\n')
>>>
```
This key is 16-bytes, so it uses AES128. If your key is 24- or 32-
bytes long, it will switch to AES192 or AES256 respectively.
This has been tested with many of the official NIST test vectors,
such as those used in `pycryptodome` at
39626a5b01/lib/Crypto/SelfTest/Cipher/test_vectors/AES
CTR has not been tested as NIST does not provide test vectors for it.
Signed-off-by: Sean Cross <sean@xobs.io>
2020-05-06 17:40:06 +08:00
Daniel Pollard
8961dd9fe7
changed build variables as per advice
2020-05-06 09:05:14 +10:00
Daniel Pollard
bfa5cd9c13
refactor countio based on feedback
2020-05-05 15:23:38 +10:00
Dan Halbert
e1366d78b1
trivial change to force rebuild
2020-05-04 23:05:47 -04:00
Dan Halbert
b7836aeac6
address review comments
2020-05-04 19:51:08 -04:00
Dan Halbert
bae7a5e433
make translate again
2020-05-04 17:26:59 -04:00
Dan Halbert
d6c6f9f4f0
add PacketBuffer .incoming_ and .outgoing_packet_length
2020-05-04 15:59:45 -04:00
dherrada
0e465e63b9
Did audiopwmio, bitbangio, and _bleio
2020-05-01 18:23:27 -04:00
Scott Shawcroft
242063e1d0
Merge pull request #2838 from spkuehl/UART_sharedbinding_fix
...
Fix #2814 Corrected UART output.
2020-05-01 11:05:24 -07:00
spkuehl
a3a2dd0f70
Corrected UART output.
2020-04-30 19:14:51 -05:00
dherrada
d65e851044
Did audioio, audiomixer, audiomp3
2020-04-30 13:06:09 -04:00
Dan Halbert
46298ddcb4
PacketBuffer doc fixes
2020-04-30 00:36:01 -04:00
Dan Halbert
f3078511a6
further cleanup and bug fixing
2020-04-29 23:18:08 -04:00
Dan Halbert
180f5c6a94
Merge remote-tracking branch 'adafruit/master' into ringbuf-fixes
2020-04-29 22:11:22 -04:00
Dan Halbert
3d62f87e29
back to '.packet_size' for compatiblity
2020-04-29 22:10:56 -04:00
Dan Halbert
84cee1ab8d
rename and improve PacketBuffer packet length property
2020-04-29 17:49:31 -04:00
dherrada
7ff9b9bc80
Did first 3
2020-04-29 17:36:28 -04:00
dherrada
a2a32fea1a
Added newlines after every ellipsis
2020-04-29 15:55:06 -04:00
dherrada
093461e816
Fixed indentation
2020-04-29 15:45:19 -04:00
dherrada
deccdcc1d6
Did the same for the rest of busio
2020-04-29 15:20:05 -04:00
dherrada
93d1e53c66
Hopefully fixed whitespace issues
2020-04-29 14:19:04 -04:00
dherrada
c7b721f4f1
Fixed some more whitespace
2020-04-28 19:22:03 -04:00
dherrada
aacca61598
Fixed whitespace on audiocore
2020-04-28 18:56:19 -04:00
dherrada
c3897d0add
Fixed whitespace in analogio
2020-04-28 18:43:40 -04:00
dherrada
724dcda3ec
Fixed whitespace in busio
2020-04-28 18:39:58 -04:00
Scott Shawcroft
755d404edf
Merge remote-tracking branch 'adafruit/master' into lower_power
2020-04-27 16:45:10 -07:00
dherrada
829da5c127
Added inline pyi to audiomp3
2020-04-27 17:29:50 -04:00
dherrada
8330471068
Added inline pyi to audiomixer
2020-04-27 17:20:40 -04:00
dherrada
1363e6e724
Added inline pyi to audiocore
2020-04-27 17:02:48 -04:00
dherrada
088b5b1785
Added inline pyi to audiocore
2020-04-27 16:49:12 -04:00
dherrada
e96235d0cf
Added inline pyi to audiobusio
2020-04-27 16:35:03 -04:00
dherrada
8344fce994
Added inline pyi to analogio
2020-04-27 13:06:47 -04:00
dherrada
27e085ec36
Added pyi to OneWire.c
2020-04-25 15:36:16 -04:00
dherrada
e7874277ab
Fixed empty lines
2020-04-25 15:35:24 -04:00
dherrada
7070fe1995
Added inline pyi to UART.c
2020-04-25 15:25:31 -04:00
dherrada
28430a9919
Added inline pyi to I2C.c
2020-04-25 15:07:58 -04:00
dherrada
55bdee688f
Reorganized pyi again
2020-04-23 16:14:17 -04:00
dherrada
855c2033b5
Reogranized pyi in spi.c
2020-04-23 15:35:20 -04:00
dherrada
a18b991ca9
Added pyi to SPI.c
2020-04-22 15:22:34 -04:00
Jeff Epler
b87af3b071
ulab: Update from upstream
...
Closes : #2787
2020-04-22 09:04:12 -05:00
Dan Halbert
77cd93ac2d
merge from adafruit
2020-04-21 17:47:51 -04:00
Dan Halbert
38ec3bc574
further ringbuf cleanup
2020-04-21 17:38:20 -04:00
Jeff Epler
507e17fbf1
displayio: Fix "bus type" problem introduced at 8cba145c90
...
When allocate_display_bus_or_raise was factored out, the assignment
of the bus's Python type was lost. Restore it.
This would have affected displays of any type other than RGBMatrix, when
they were created dynamically. Boards with displays configured in flash
were unaffected.
Closes : #2792
2020-04-21 13:48:34 -05:00
Scott Shawcroft
bebf27e733
Merge remote-tracking branch 'adafruit/master' into lower_power
...
This isn't perfect and needs a bit more testing.
2020-04-20 18:25:13 -07:00
Jeff Epler
898c09c35e
RGBMatrix: nonessential change to kick Actions
2020-04-19 09:10:08 -05:00
Jeff Epler
9bfe6b7197
framebufferio: update copyright information
2020-04-17 18:44:07 -05:00
Jeff Epler
8c455f24bf
RGBMatrix: this comment no longer describes the code
...
... allocate_display_bus_or_raise() uses fixed storage, not heap storage.
2020-04-17 18:44:07 -05:00
Jeff Epler
37cb6bafa8
RGBMatrix: documentation got behind the code
2020-04-17 18:44:07 -05:00
Jeff Epler
5fcc6d6286
RGBMatrix: finish renaming from Protomatter
...
This gets all the purely internal references. Some uses of
protomatter/Protomatter/PROTOMATTER remain, as they are references
to symbols in the Protomatter C library itself.
2020-04-17 18:44:07 -05:00
Jeff Epler
1b478bbae6
RGBMatrix: remove unneeded properties
2020-04-17 18:43:57 -05:00
Jeff Epler
57ce2d1f41
framebufferio: get width, etc., from protocol, not object property
2020-04-17 18:43:57 -05:00
Jeff Epler
3d6258f63d
Rename Protomatter -> RGBMatrix
...
This is a quick rename, it changes the user-facing names but not the
internal names of things.
2020-04-17 18:43:57 -05:00
Jeff Epler
64c3968a2e
protomatter: move get_width/height to common_hal
2020-04-17 18:43:57 -05:00
Jeff Epler
545b6e560a
fix doc build
2020-04-17 18:43:57 -05:00
Jeff Epler
1a91a75b9c
framebufferio: get more properties direct from underlying framebuffer
2020-04-17 18:43:57 -05:00
Jeff Epler
a32337718d
Rename _protomatter -> protomatter
...
I originally believed that there would be a wrapper library around it,
like with _pixelbuf; but this proves not to be the case, as there's
too little for the library to do.
2020-04-17 18:43:57 -05:00
Jeff Epler
d1ff23e004
framebufferio: get width, height from framebuffer properties
2020-04-17 18:43:57 -05:00
Jeff Epler
d2aac7a754
Protomatter: add width, height properties
2020-04-17 18:43:57 -05:00
AndrewR-L
f572b72306
busio/UART: Correct and clarify readline() return.
...
Surely readline() "rtype" is string not int as stated (and not bytes as some might expect).
Also it is not totally unambiguous what happens on a timeout so it would help to clarify in docs that on a timeout
it does NOT return with what it has read so far, rather it leaves all that in the buffer ready for a future read and returns nothing.
Likewise clarify that if timeout=0 but there is no newline it DOES return what it has read so far (NOT None).
At least this is what I think it does and/or is supposed to do!
Python docs are generally not too explicit about what is the proper treatment, so perhaps all the more reason to
clarify the interpretation adopted?
2020-04-17 15:10:36 +01:00
Scott Shawcroft
b580b34cbf
Merge remote-tracking branch 'adafruit/master' into lower_power
2020-04-14 17:14:44 -07:00
Jeff Epler
0ce9c008c5
Protomatter: Make all arguments kw-only, add rgb count and optional height checking
...
They're not readily distinguishable by type.
I also added the requested height optional parameter; this is checked
against the computed one. It's not feasible to use this parameter to
artificailly reduce the number of used rows, because changes in the
underlying C protomatter library would be required.
Finally, I added a better error message when the number of RGB pins was
not what was expected.
2020-04-14 18:24:59 -05:00
Jeff Epler
880fff80e9
protomatter: Respond to review comments
...
- rename oe_pin -> output_enable_pin
- improve and reorganize docstrings
- rename swapbuffers->refresh
- rename "paused" -> "brightness", change semantics slightly
- common_hal several functions
- clarify why the common_hal routines can't be used directly in the
protocol's function pointers
- whitespace cleanups
- remove prototypes for nonexistent functions
2020-04-14 18:24:59 -05:00
Jeff Epler
5d328c3b44
protomatter: clarify by comment why these functions exist
2020-04-14 18:24:58 -05:00
Jeff Epler
ba20bc8b43
framebufferio: move backlight down to the underlying framebuffer
2020-04-14 18:24:58 -05:00
Jeff Epler
129c6369cf
protomatter: code style
2020-04-14 18:24:58 -05:00
Jeff Epler
4a05e938ed
protomatter: validate pins to give better error message
...
The numbered error from the underlying library is not helpful for
beginning users
2020-04-14 18:24:58 -05:00
Jeff Epler
9019710a1e
protomatter: improve an error message
2020-04-14 18:24:58 -05:00
Jeff Epler
baf04b7738
FramebufferDisplay: remove probably not needed constructor arguments
2020-04-14 18:24:58 -05:00
Jeff Epler
50219862e1
protomatter: make docstring match implementation
2020-04-14 18:24:58 -05:00
Jeff Epler
a663a7dd30
_protomatter: move get/set paused into shared-module
2020-04-14 18:24:58 -05:00
Jeff Epler
5fcba97a51
Make function name more descriptive
2020-04-14 18:24:58 -05:00
Jeff Epler
89eb45a13c
use floor division in docstring
...
Co-Authored-By: Scott Shawcroft <scott@tannewt.org>
2020-04-14 18:24:58 -05:00
Jeff Epler
09dc46a984
Add Protomatter and FramebufferDisplay
2020-04-14 18:24:54 -05:00
Jeff Epler
8cba145c90
displayio: implement, use allocate_new_display_bus_or_raise
2020-04-14 18:24:54 -05:00
Jeff Epler
6378d600c4
displayio: implement, use allocate_display_or_raise
2020-04-14 18:24:54 -05:00
Scott Shawcroft
ada102dd98
Merge pull request #2767 from jepler/update-ulab
...
ulab: Get updates from upstream
2020-04-14 15:59:33 -07:00
Scott Shawcroft
e063b066f0
Merge pull request #2756 from caternuson/bitmap_fill
...
Add fill method to displayio.Bitmap
2020-04-14 12:54:44 -07:00
Jeff Epler
693928d201
doc updates
2020-04-13 20:10:02 -05:00
caternuson
dc75746842
add docstring, clean up
2020-04-09 08:59:26 -07:00
caternuson
49fff2d9b4
initial working fill
2020-04-09 08:43:50 -07:00
sommersoft
61bab8e62e
ulab/__init__.rst: fix attribute name; uint8 -> uint16
2020-04-09 08:45:26 -05:00
Scott Shawcroft
317b96e93a
Fix iMX builds
2020-03-31 17:00:30 -07:00
Scott Shawcroft
cbe9512691
Merge pull request #2741 from tannewt/fix_packetbuffer_server
...
Fix PacketBuffer server support
2020-03-31 13:39:34 -07:00
Jeff Epler
54e8c63b4f
Merge pull request #2730 from tannewt/fix_fourwire_phase_polarity
...
Add polarity and phase to FourWire.
2020-03-28 07:28:37 -05:00
Scott Shawcroft
a870908718
Don't break the function signature
2020-03-26 14:11:20 -07:00
siddacious
9e0c00dfd4
adding a backlight polarity flag to Display
2020-03-25 22:51:20 -07:00
Scott Shawcroft
8a5d3cd6c4
Add exception on small buffer and fix Connecion WRITE handling
2020-03-25 17:41:47 -07:00
Scott Shawcroft
6b7acc65b6
Add polarity and phase to FourWire.
...
It was fixed as 0/0 even though it used to get it from the current
SPI state. This makes it more explicit with kwargs.
Thanks to magpie_lark and kmatocha on the Adafruit Support forum
for finding the issue: https://forums.adafruit.com/viewtopic.php?f=60&t=162515
2020-03-25 11:22:46 -07:00
Jeff Epler
aaf07ce72f
Update shared-bindings/ulab/__init__.rst
...
Co-Authored-By: Scott Shawcroft <scott@tannewt.org>
2020-03-17 16:37:16 -05:00
Jeff Epler
aa54a7e76e
ulab: update documentation
2020-03-17 09:25:33 -05:00
Dale Hawkins
8ae103e07c
Fix documentation typo: tm_minute should be tm_min
2020-03-16 09:07:10 -06:00
Dan Halbert
fdcdc1320b
Make ParallelBus reset ping arg required
2020-03-06 14:30:30 -05:00
Dan Halbert
210c3274e5
Merge remote-tracking branch 'adafruit/master' into assert_pin-and-mp_const_none-cleanup
2020-03-05 17:47:01 -05:00
Dan Halbert
817b5be320
rename routines to be clearer; fix wiznet arg types
2020-03-05 16:35:31 -05:00
Dan Halbert
e30b1d3121
missing semicolon
2020-02-29 22:48:11 -05:00
Dan Halbert
8435935429
update uses of assert_pin_free; remove redundant checks
2020-02-29 15:37:32 -05:00
Dan Halbert
b6206406de
new pin validation routines; don't use mp_const_none if NULL will do
2020-02-28 23:43:04 -05:00
Jeff Epler
39cfe32c34
Update ulab from upstream again
2020-02-27 14:14:05 -06:00
Jeff Epler
645df931ae
typos
2020-02-27 11:07:37 -06:00
Jeff Epler
fa3b9eba92
ulab: Incorporate it
2020-02-27 11:03:03 -06:00
Dan Halbert
e31ac710be
Enable _bleio adapter when _bleio is imported
2020-02-20 21:55:04 -05:00
Dave Marples
d388899985
Addition of RS485 support
2020-02-18 23:16:40 +00:00
Dave Marples
84ad3d8393
Addition of RTS/CTS/RS485 UART functionality
2020-02-18 23:16:40 +00:00
Scott Shawcroft
52d96ca151
Merge pull request #2626 from dhalbert/stat-for-shortint
...
avoid os.stat() int overflow on smallint-only builds
2020-02-18 13:40:52 -08:00
Dan Halbert
e0753c4ad2
avoid os.stat() int overflow on smallint-only builds
2020-02-14 18:33:37 -05:00
Melissa LeBlanc-Williams
33774e790c
Updated OnDiskBitmap RTD example for 5.x
2020-02-14 10:23:23 -08:00
Scott Shawcroft
e97b0cfc61
Merge pull request #2581 from jamesbowman/master
...
First draft of eveL, the low-level module of the Gameduino bindings
2020-02-13 11:21:32 -08:00
James Bowman
b02937d1a7
Split ROMDECLS for readability
2020-02-13 07:28:21 -08:00
Dan Halbert
c57ccd5eb4
doc typo
2020-02-11 20:03:47 -05:00
Dan Halbert
f73b58a2c6
fix doc indentation
2020-02-11 19:57:48 -05:00
Dan Halbert
2e029d55fc
nrf: add SPIM3 support
2020-02-11 19:22:14 -05:00
James Bowman
a87dee2f66
Correct the BitmapTransform operations.
...
Correct argument order
better argument naming
fix copypaste bug on C and F arguments
2020-02-10 19:34:38 -08:00
James Bowman
1f44029c56
Remove unused code
2020-02-10 18:57:04 -08:00
James Bowman
f101ff60c5
Move _eve module declarations into shared-bindings header
2020-02-07 17:10:19 -08:00
James Bowman
c631b4d60e
Add doc strings, inline mod_eve-gen.h and remove it
2020-02-07 16:44:48 -08:00
James Bowman
5c6d94d3e5
Split into shared-module and shared-bindings
2020-02-07 10:30:49 -08:00
Dan Halbert
cbd519bfa6
time.sleep() rounds to nearest msec
2020-02-07 10:24:11 -05:00
Dan Halbert
857d8ab40a
improve time.monotonic_ns() accuracy from ms to us
2020-02-07 10:02:50 -05:00
James Bowman
a20490c0b3
Add method VertexFormat() and variable fixed-point scaling in Vertex2f()
2020-02-06 08:49:07 -08:00
James Bowman
acef93a253
Rename eveL to _eve, EVEL to _EVE
2020-02-05 18:17:58 -08:00
James Bowman
a9b34f45dc
My name
2020-02-05 18:01:25 -08:00
James Bowman
53f7e2be4f
Use mp_instance_cast_to_native_base() throughout
2020-02-05 17:58:59 -08:00
Dan Halbert
a4ebd2f7c1
allow tuple or list for Palette color
2020-02-03 22:09:53 -05:00
James Bowman
0bcfabbc87
Add header for module eveL explaining what it is.
...
Exclude modeveL-gen.h from Sphinx build
2020-02-03 18:41:32 -08:00
James Bowman
7fd30e7d20
First draft of eveL, the low-level module of the Gameduino (and BridgeTek EVE) bindings.
...
[adafruit/circuitpython#2578 ]
2020-02-03 16:46:14 -08:00
Scott Shawcroft
55eb1730b8
Merge remote-tracking branch 'adafruit/master' into tweak_pixelbuf
2020-01-30 10:59:21 -08:00
Radomir Dopieralski
27c36eea2b
circuitpython-stage: allow choosing background color
2020-01-30 15:24:04 +01:00
Scott Shawcroft
5d24ade5c9
Tweak error messages to reduce code size.
2020-01-29 17:32:07 -08:00
Dan Halbert
e21580b67f
PacketBuffer.packet_size was returning bool instead of int
2020-01-27 17:10:56 -05:00
Scott Shawcroft
39971794dd
Encapsulate buffers inside PixelBuf and refactor it.
2020-01-24 18:23:07 -08:00
Dan Halbert
2a75196aa3
merge from adafruit/circuitpython
2020-01-13 18:15:32 -05:00
Dan Halbert
9e7f8743c2
fix CCCD bonding store; avoid excessive bonding writes
2020-01-12 23:32:51 -05:00
Dan Halbert
346ce3b73b
wip: HID bonding works!
2020-01-10 23:55:45 -05:00
Scott Shawcroft
8708d3dc45
Merge pull request #2461 from jepler/urandom-hardfaults
...
Urandom hardfaults
2020-01-10 11:37:59 -08:00
Dan Halbert
9c167af17a
wip; redid flash writing to be compatible with SD
2020-01-09 17:40:02 -05:00
Scott Shawcroft
a10cd8580c
Merge pull request #2445 from jepler/mp3-jeplayer-fixes
...
Fixes for JEplayer
2020-01-08 12:50:13 -08:00
Jeff Epler
6735283d8f
os: Don't require an on-stack buffer
...
This allows urandom requests of even 100k bytes to succeed on a fresh
VM session on a Metro M4 express.
2020-01-08 09:43:13 -06:00
Jeff Epler
b1b4a9e842
fix doc build error
2020-01-06 09:26:32 -06:00
Jeff Epler
dc729718eb
audiomp3: rename to MP3Decoder
2020-01-06 07:51:41 -06:00