This patch is a code optimisation, trading text bytes for speed. On
pyboard it's an increase of 0.06% in code size for a gain (in pystone
performance) of roughly 6.5%.
The patch optimises load/store/delete of attributes in user defined classes
by not looking up special accessors (@property, __get__, __delete__,
__set__, __setattr__ and __getattr_) if they are guaranteed not to exist in
the class.
Currently, if you do my_obj.foo() then the runtime has to do a few checks
to see if foo is a property or has __get__, and if so delegate the call.
And for stores things like my_obj.foo = 1 has to first check if foo is a
property or has __set__ defined on it.
Doing all those checks each and every time the attribute is accessed has a
performance penalty. This patch eliminates all those checks for cases when
it's guaranteed that the checks will always fail, ie no attributes are
properties nor have any special accessor methods defined on them.
To make this guarantee it checks all attributes of a user-defined class
when it is first created. If any of the attributes of the user class are
properties or have special accessors, or any of the base classes of the
user class have them, then it sets a flag in the class to indicate that
special accessors must be checked for. Then in the load/store/delete code
it checks this flag to see if it can take the shortcut and optimise the
lookup.
It's an optimisation that's pretty widely applicable because it improves
lookup performance for all methods of user defined classes, and stores of
attributes, at least for those that don't have special accessors. And, it
allows to enable descriptors with minimal additional runtime overhead if
they are not used for a particular user class.
There is one restriction on dynamic class creation that has been introduced
by this patch: a user-defined class cannot go from zero special accessors
to one special accessor (or more) after that class has been subclassed. If
the script attempts this an AttributeError is raised (see addition to
tests/misc/non_compliant.py for an example of this case).
The cost in code space bytes for the optimisation in this patch is:
unix x64: +528
unix nanbox: +508
stm32: +192
cc3200: +200
esp8266: +332
esp32: +244
Performance tests that were done:
- on unix x86-64, pystone improved by about 5%
- on pyboard, pystone improved by about 6.5%, from 1683 up to 1794
- on pyboard, bm_chaos (from CPython benchmark suite) improved by about 5%
- on esp32, pystone improved by about 30% (but there are caching effects)
- on esp32, bm_chaos improved by about 11%
The string "Q+?" is special in that it hashes to zero with the djb2
algorithm (among other strings), and a zero hash should be incremented to a
hash of 1.
The case of a return statement in the try suite of a try-except statement
was previously only tested by builtin_compile.py, and only then in the part
of this test which checked for the existence of the compile builtin. So
this patch adds an explicit unit test for this case.
The VM expects that, if mp_resume() returns MP_VM_RETURN_EXCEPTION, then
the returned value is an exception instance (eg to add a traceback to it).
It's possible that a value passed to a generator's throw() is not an
exception so must be explicitly checked for if the thrown value is not
intercepted by the generator.
Thanks to @jepler for finding the bug.
Prior to this patch the code would crash if a key in a ** dict was anything
other than a str or qstr. This is because mp_setup_code_state() assumes
that keys in kwargs are qstrs (for efficiency).
Thanks to @jepler for finding the bug.
micropython: ../../py/objtype.c:1100: super_attr: Assertion `MP_OBJ_IS_TYPE(self->type, &mp_type_type)' failed.
e.g., when making calls like
super(1, 1).x
Fixes the following assertion failures when the arguments to type()
were not of valid types:
micropython: ../../py/objtype.c:984: mp_obj_new_type: Assertion `MP_OBJ_IS_TYPE(bases_tuple, &mp_type_tuple)' failed.
micropython: ../../py/objtype.c:994: mp_obj_new_type: Assertion `MP_OBJ_IS_TYPE(items[i], &mp_type_type)' failed.
e.g., when making calls like
type("", (), 3)
type("", 3, {})
.. defaulting to off for circuitpython-supported boards, on for others.
.. fixing up the tests that fail when it is turned off, so that they skip
instead of failing
This patch concerns the handling of an NLR-raised StopIteration, raised
during a call to mp_resume() which is handling the yield from opcode.
Previously, commit 6738c1dded introduced code
to handle this case, along with a test. It seems that it was lucky that
the test worked because the code did not correctly handle the stack pointer
(sp).
Furthermore, commit 79d996a57b improved the
way mp_resume() propagated certain exceptions: it changed raising an NLR
value to returning MP_VM_RETURN_EXCEPTION. This change meant that the
test introduced in gen_yield_from_ducktype.py was no longer hitting the
code introduced in 6738c1dded.
The patch here does two things:
1. Fixes the handling of sp in the VM for the case that yield from is
interrupted by a StopIteration raised via NLR.
2. Introduces a new test to check this handling of sp and re-covers the
code in the VM.
Otherwise passing -1 as maxlen will lead to a zero allocation and
subsequent unbound buffer overflow in deque.append() because i_put is
allowed to grow without bound.
Prior to this patch uPy (on a 32-bit arch) would have severe issues when
calling bytes(-1): such a call would call vstr_init_len(vstr, -1) which
would then +1 on the len and call vstr_init(vstr, 0), which would then
round this up and allocate a small amount of memory for the vstr. The
bytes constructor would then attempt to zero out all this memory, thinking
it had allocated 2^32-1 bytes.
This patch improves the builtin dir() function by probing the target object
with all possible qstrs via mp_load_method_maybe. This is very simple (in
terms of implementation), doesn't require recursion, and allows to list all
methods of user-defined classes (without duplicates) even if they have
multiple inheritance with a common parent. The downside is that it can be
slow because it has to iterate through all the qstrs in the system, but
the "dir()" function is anyway mostly used for testing frameworks and user
introspection of types, so speed is not considered a priority.
In addition to providing a more complete implementation of dir(), this
patch is simpler than the previous implementation and saves some code
space:
bare-arm: -80
minimal x86: -80
unix x64: -56
unix nanbox: -48
stm32: -80
cc3200: -80
esp8266: -104
esp32: -64
This feature is not often used so is guarded by the config option
MICROPY_PY_BUILTINS_RANGE_BINOP which is disabled by default. With this
option disabled MicroPython will always return false when comparing two
range objects for equality (unless they are exactly the same object
instance). This does not match CPython so if (in)equality between range
objects is needed then this option should be enabled.
Enabling this option costs between 100 and 200 bytes of code space
depending on the machine architecture.
Note that the check for elem!=NULL is removed for the
MP_MAP_LOOKUP_ADD_IF_NOT_FOUND case because mp_map_lookup will always
return non-NULL for such a case.
This implements .pend_throw(exc) method, which sets up an exception to be
triggered on the next call to generator's .__next__() or .send() method.
This is unlike .throw(), which immediately starts to execute the generator
to process the exception. This effectively adds Future-like capabilities
to generator protocol (exception will be raised in the future).
The need for such a method arised to implement uasyncio wait_for() function
efficiently (its behavior is clearly "Future" like, and normally would
require to introduce an expensive Future wrapper around all native
couroutines, like upstream asyncio does).
py/objgenerator: pend_throw: Return previous pended value.
This effectively allows to store an additional value (not necessary an
exception) in a coroutine while it's not being executed. uasyncio has
exactly this usecase: to mark a coro waiting in I/O queue (and thus
not executed in the normal scheduling queue), for the purpose of
implementing wait_for() function (cancellation of such waiting coro
by a timeout).
"Builtin" tinytest-based testsuite as employed by qemu-arm (and now
generalized by me to be reusable for other targets) performs simplified
detection of skipped tests, it treats as such tests which raised SystemExit
(instead of checking got "SKIP" output). Consequently, each "SKIP" must
be accompanied by SystemExit (and conversely, SystemExit should not be
used if test is not skipped, which so far seems to be true).
CPython docs explicitly state that the RHS of a set/frozenset binary op
must be a set to prevent user errors. It also preserves commutativity of
the ops, eg: "abc" & set() is a TypeError, and so should be set() & "abc".
This change actually decreases unix (x64) code by 160 bytes; it increases
stm32 by 4 bytes and esp8266 by 28 bytes (but previous patch already
introduced a much large saving).
Prior to this patch, the size of the buffer given to pack_into() was checked
for being too small by using the count of the arguments, not their actual
size. For example, a format spec of '4I' would only check that there was 4
bytes available, not 16; and 'I' would check for 1 byte, not 4.
The pack() function is ok because its buffer is created to be exactly the
correct size.
The fix in this patch calculates the total size of the format spec at the
start of pack_into() and verifies that the buffer is large enough. This
adds some computational overhead, to iterate through the whole format spec.
The alternative is to check during the packing, but that requires extra
code to handle alignment, and the check is anyway not needed for pack().
So to maintain minimal code size the check is done using struct_calcsize.
Prior to this patch, the size of the buffer given to unpack/unpack_from was
checked for being too small by using the count of the arguments, not their
actual size. For example, a format spec of '4I' would only check that
there was 4 bytes available, not 16; and 'I' would check for 1 byte, not 4.
This bug is fixed in this patch by calculating the total size of the format
spec at the start of the unpacking function. This function anyway needs to
calculate the number of items at the start, so calculating the total size
can be done at the same time.
This patch makes a repeat counter behave the same as repeating the
typecode, when there are not enough args. For example:
struct.pack('2I', 1) now behave the same as struct.pack('II', 1).
Similar to the existing testcase, but test that returning both value of
native type and instance of another user class from __new__ lead to
__init__ not being called, for better coverage.
NotImplemented means "try other fallbacks (like calling __rop__
instead of __op__) and if nothing works, raise TypeError". As
MicroPython doesn't implement any fallbacks, signal to raise
TypeError right away.
Otherwise, it will silently get incorrect result on other values types,
including CPython tuple form like "foo.png".endswith(("png", "jpg"))
(which MicroPython doesn't support for unbloatedness).
The value of 0 can't be used because otherwise mp_binary_get_size will let
a null byte through as the type code (intepreted as byterray). This can
lead to invalid type-specifier strings being let through without an error
in the struct module, and even buffer overruns.
This introduces a skip_if module that can be used by tests to
determine when they should be skipped due to the environment.
Some tests have been split in order to have finer grained skip
control.
Fixes for stmhal USB mass storage, lwIP bindings and VFS regressions
This release provides an important fix for the USB mass storage device in
the stmhal port by implementing the SCSI SYNCHRONIZE_CACHE command, which
is now require by some Operating Systems. There are also fixes for the
lwIP bindings to improve non-blocking sockets and error codes. The VFS has
some regressions fixed including the ability to statvfs the root.
All changes are listed below.
py core:
- modbuiltins: add core-provided version of input() function
- objstr: catch case of negative "maxsplit" arg to str.rsplit()
- persistentcode: allow to compile with complex numbers disabled
- objstr: allow to compile with obj-repr D, and unicode disabled
- modsys: allow to compile with obj-repr D and PY_ATTRTUPLE disabled
- provide mp_decode_uint_skip() to help reduce stack usage
- makeqstrdefs.py: make script run correctly with Python 2.6
- objstringio: if created from immutable object, follow copy on write policy
extmod:
- modlwip: connect: for non-blocking mode, return EINPROGRESS
- modlwip: fix error codes for duplicate calls to connect()
- modlwip: accept: fix error code for non-blocking mode
- vfs: allow to statvfs the root directory
- vfs: allow "buffering" and "encoding" args to VFS's open()
- modframebuf: fix signed/unsigned comparison pendantic warning
lib:
- libm: use isfinite instead of finitef, for C99 compatibility
- utils/interrupt_char: remove support for KBD_EXCEPTION disabled
tests:
- basics/string_rsplit: add tests for negative "maxsplit" argument
- float: convert "sys.exit()" to "raise SystemExit"
- float/builtin_float_minmax: PEP8 fixes
- basics: convert "sys.exit()" to "raise SystemExit"
- convert remaining "sys.exit()" to "raise SystemExit"
unix port:
- convert to use core-provided version of built-in import()
- Makefile: replace references to make with $(MAKE)
windows port:
- convert to use core-provided version of built-in import()
qemu-arm port:
- Makefile: adjust object-file lists to get correct dependencies
- enable micropython.mem_*() functions to allow more tests
stmhal port:
- boards: enable DAC for NUCLEO_F767ZI board
- add support for NUCLEO_F446RE board
- pass USB handler as parameter to allow more than one USB handler
- usb: use local USB handler variable in Start-of-Frame handler
- usb: make state for USB device private to top-level USB driver
- usbdev: for MSC implement SCSI SYNCHRONIZE_CACHE command
- convert from using stmhal's input() to core provided version
cc3200 port:
- convert from using stmhal's input() to core provided version
teensy port:
- convert from using stmhal's input() to core provided version
esp8266 port:
- Makefile: replace references to make with $(MAKE)
- Makefile: add clean-modules target
- convert from using stmhal's input() to core provided version
zephyr port:
- modusocket: getaddrinfo: Fix mp_obj_len() usage
- define MICROPY_PY_SYS_PLATFORM (to "zephyr")
- machine_pin: use native Zephyr types for Zephyr API calls
docs:
- machine.Pin: remove out_value() method
- machine.Pin: add on() and off() methods
- esp8266: consistently replace Pin.high/low methods with .on/off
- esp8266/quickref: polish Pin.on()/off() examples
- network: move confusingly-named cc3200 Server class to its reference
- uos: deconditionalize, remove minor port-specific details
- uos: move cc3200 port legacy VFS mounting functions to its ref doc
- machine: sort machine classes in logical order, not alphabetically
- network: first step to describe standard network class interface
examples:
- embedding: use core-provided KeyboardInterrupt object
In CPython 3.4 this raises a SyntaxError. In CPython 3.5+ having a
positional after * is allowed but uPy has the wrong semantics and passes
the arguments in the incorrect order. To prevent incorrect use of a
function going unnoticed it is important to raise the SyntaxError in uPy,
until the behaviour is fixed to follow CPython 3.5+.
Tests for an issue with line continuation failing in paste mode due to the
lexer only checking for \n in the "following" character position, before
next_char() has had a chance to convert \r and \r\n to \n.
The 'S' typecode is a uPy extension so it should be grouped with the other
extension (namely 'O' typecode). Testing 'S' needs uctypes which is an
extmod module and not always available, so this test is made optional and
will only be run on ports that have (u)struct and uctypes. Otherwise it
will be silently skipped.
Tests which don't work with small ints are suffixed with _intbig.py. Some
of these may still work with long long ints and need to be reclassified
later.
This patch implements support for class methods __delattr__ and __setattr__
for customising attribute access. It is controlled by the config option
MICROPY_PY_DELATTR_SETATTR and is disabled by default.
Updated modbuiltin.c to add conditional support for 3-arg calls to
pow() using MICROPY_PY_BUILTINS_POW3 config parameter. Added support in
objint_mpz.c for for optimised implementation.
CPython 3.6 has a few changes that, when run on uPy's test suite, give a
different output to CPython 3.5. uPy currently officially supports the
3.4 language definition, but it's useful to be able to run the test suite
with 3.4/3.5/3.6 versions of CPython. This patch makes such changes to
support 3.6.
If sets are not enabled, set literals lead to SyntaxError during parsing,
so it requires feature_check. Set tests are skipped based on set_*.py
pattern.
