jun2sak
a17fcb6d1a
add copyright notice. remove obsolete comments.
2021-04-25 19:19:11 +09:00
Artyom Skrobov
4e3c1d4a4c
[build] Allow USB to be set to 0
...
Unify USB-related makefile var and C def as CIRCUITPY_USB.
Always define it as 0 or 1, same as all other settings.
USB_AVAILABLE was conditionally defined in supervisor.mk,
but never actually used to #ifdef USB-related code.
Loosely related to #4546
2021-04-23 11:13:34 -04:00
Dan Halbert
346740e152
Merge pull request #4609 from Neradoc/add_nrf_countio
...
NRF: implement countio
2021-04-23 08:37:00 -04:00
Scott Shawcroft
43c16c89c4
Account for max_packet_size in outgoing length
2021-04-15 16:34:06 -07:00
Scott Shawcroft
aa28d4f315
Allow setting max_packet_size for PacketBuffer
...
This is handy for remote characteristics because it allows for
the PacketBuffer binding code to have the correct max size. This
PR also adds checks so we don't write outside the outgoing buffer.
2021-04-14 17:09:48 -07:00
Neradoc
0d743224f2
add countio to nrf port
2021-04-14 01:37:19 +02:00
Scott Shawcroft
b273f59c4e
Assume max characteristic size when the client
2021-04-13 15:37:47 -07:00
jun2sak
6e9429d779
soft reboot for pretending deep sleep.
2021-04-12 20:53:14 +09:00
Lucian Copeland
15764b4c24
Merge remote-tracking branch 'upstream/main' into nrf52-sleep
2021-04-09 13:48:45 -04:00
Dan Halbert
1b60c9d033
Merge pull request #4580 from jepler/incrementalencoder-refactor
...
IncrementalEncoder: factor out the quadrature state machine
2021-04-09 13:10:02 -04:00
Dan Halbert
61e33a5619
fix nrf ISR; make direction consistent across ports; save code size
2021-04-09 11:07:47 -04:00
Dan Halbert
72055ff02b
Merge pull request #4578 from tannewt/packetbuffer_lengths
...
Improve PacketBuffer lengths and remove packet_size
2021-04-08 18:55:24 -04:00
Jeff Epler
d69ca4a8ae
nrf: switch to shared softencoder implementation
2021-04-08 16:36:10 -05:00
Scott Shawcroft
e3b3f97fa6
Improve PacketBuffer packet lengths for remote service
2021-04-08 13:25:11 -07:00
Jonny Bergdahl
1afd204828
Changed error message to display the generic term 'system firmware' instead of the Nordic specific term 'soft device'
2021-04-02 20:34:37 +02:00
Scott Shawcroft
58835e5a5b
Two small PacketBuffer fixes
...
1. Allow for ctrl-c during a write.
2. Handle disconnects when acting as a client.
2021-04-01 14:16:35 -07:00
Scott Shawcroft
0752bbd5fd
Fix central pairing and crash on clear
...
The list_clear would crash if we tried to clear a NULL list. (It
can happen if we haven't tried to discover any services.)
2021-03-31 16:04:04 -07:00
gamblor21
0890b54cd9
More formatting
2021-03-16 08:29:04 -05:00
gamblor21
fb437d8280
Formatting fixes
2021-03-16 08:22:02 -05:00
Mark
e326d7ca80
Merge branch 'main' into rp_dp_parallel
2021-03-15 20:00:13 -05:00
microDev
a52eb88031
run code formatting script
2021-03-15 19:27:36 +05:30
gamblor21
56a219911f
Add frequency support to parallel bus
2021-03-11 19:32:43 -06:00
jun2sak
c8f36e604c
reset myself, not go REPL, after wakeup from deep sleep.
2021-03-09 00:42:22 +09:00
jun2sak
51c7a49853
Merge branch 'main' into nrf52-sleep
2021-03-07 20:50:53 +09:00
jun2sak
2eed9a1735
old System OFF sleep code for future reference.
2021-03-07 20:21:33 +09:00
jun2sak
2795c002ad
disable QSPI while system ON idle loop.
2021-03-07 19:14:04 +09:00
jun2sak
3fab9f8b1b
new wait-until-alarm design, don't use System OFF.
2021-03-07 01:09:54 +09:00
Artyom Skrobov
e0b96c0f43
[nrf] No need to store buffer_length as part of audiopwmio_pwmaudioout_obj_t
2021-03-05 06:01:58 -05:00
Jeff Epler
238484ec26
Merge remote-tracking branch 'origin/main' into update-protomatter-rp2
2021-03-01 15:18:32 -06:00
jun2sak
7cecd99658
remove unused debug printf's.
2021-02-28 16:04:29 +09:00
jun2sak
3e47e00291
address the pretending-to-deep-sleep issue.
2021-02-28 15:57:37 +09:00
jun2sak
498debc826
remove unused debug printf's.
2021-02-28 15:37:25 +09:00
Jeff Epler
1d1ff5f308
Merge remote-tracking branch 'origin/main' into update-protomatter-rp2
2021-02-26 09:56:35 -06:00
Scott Shawcroft
3f08cb47b8
Merge remote-tracking branch 'adafruit/main' into busio-uart-rp
2021-02-25 16:59:15 -08:00
jun2sak
0f8c96f424
remove trailing whitespaces.
2021-02-26 09:11:35 +09:00
jun2sak
7fd4648cd5
rase error if Alarm time >= 512 sec.
2021-02-26 09:06:11 +09:00
jun2sak
277a67d876
call touchalarm funcs as well as pin/timealarm.
2021-02-26 08:11:50 +09:00
jun2sak
2aa5aec0d5
cleanup.
2021-02-26 01:45:12 +09:00
jun2sak
c713d31d0d
move externs to .h
2021-02-26 01:20:55 +09:00
jun2sak
c86ca2a4ff
move externs to .h
2021-02-26 00:51:52 +09:00
jun2sak
9328d09a7a
re-enable parameters check.
2021-02-26 00:50:44 +09:00
jun2sak
61a69daae1
raise NotImplementedError when construct TouchAlarm.
2021-02-25 08:19:03 +09:00
microDev
5d7fdafcde
implement suggested changes
...
- add internal buffering
- rtc initialization fix
2021-02-25 00:48:36 +05:30
jun2sak
f66896ce32
use nRF SDK function to set up memory retention.
2021-02-25 02:34:43 +09:00
jun2sak
9661d67cd3
replace MY_DEBUG_UART -> NRF_DEBUG_PRINT.
2021-02-25 01:49:57 +09:00
jun2sak
0f188befb6
set RAM retention just before deep sleep
2021-02-24 00:12:25 +09:00
jun2sak
ec64fa6a29
move dump_xxx functions to debug_uart.c.
2021-02-23 12:16:37 +09:00
jun2sak
9df0f439f3
alarm/pin/__init__.c is no longer used.
2021-02-23 10:31:49 +09:00
jun2sak
1da8b9900a
Merge branch 'main' into nrf52-sleep
2021-02-21 13:35:06 +09:00
jun2sak
36c59250dd
some cleanups.
2021-02-21 09:57:14 +09:00
jun2sak
793198909e
set SleepMemory size to 256 bytes.
2021-02-21 08:19:39 +09:00
jun2sak
41d9d4e0ab
call sd API only when sd enabled.
2021-02-21 08:17:57 +09:00
jun2sak
26f8f532f1
safe mode fix.
2021-02-21 00:47:07 +09:00
Dan Halbert
5c37b73c6d
fix typo to fix nrf builds
2021-02-18 11:09:32 -05:00
jun2sak
cf2427c561
light sleep reason fix.
2021-02-17 21:51:28 +09:00
jun2sak
e6350ff834
Initial commit.
2021-02-17 20:53:18 +09:00
Dan Halbert
d54b5861a3
wip
2021-02-12 19:01:14 -05:00
Jeff Epler
ff1942cff6
Enable protomatter on RP2040 builds
...
Also found a race condition between timer_disable and redraw, which
would happen if I debugger-paused inside common_hal_rgbmatrix_timer_disable
or put a delay or print inside it. That's what pausing inside reconstruct
fixes.
So that the "right timer" can be chosen, `timer_allocate` now gets the `self`
pointer. It's guaranteed at this point that the pin information is accurate,
so you can e.g., find a PWM unit related to the pins themselves.
This required touching each port to add the parameter even though it's
unused everywhere but raspberrypi.
2021-02-12 08:25:15 -06:00
Dan Halbert
f0564b4986
merge from upstream; complicated webusb merge
2021-02-11 18:50:02 -05:00
Dan Halbert
1b7f3d11e7
wip
2021-02-08 10:57:41 -05:00
BiffoBear
2656c84b01
Initial commit. Edited error messages in .c files
2021-02-03 05:49:40 +07:00
Bernhard Boser
16d54586c1
remove long read error message
2021-01-27 09:20:45 -08:00
Bernhard Boser
e27dd26dc7
make translate, BEWARE adds the 'world'
2021-01-18 11:26:39 -08:00
Bernhard Boser
07a9593abc
add flow control info to busio_uart_obj_t
2021-01-17 19:33:32 -08:00
Dan Halbert
ccace62ac9
don't check length for remote characteristic or dedescriptor
2021-01-13 15:35:51 -05:00
Dan Halbert
a397af9bdf
Round BLE timing values; fix timeout check
2021-01-10 13:16:19 -05:00
Bernhard Boser
c7dc5f2507
support RTS/CTS hardware flow control
2021-01-07 14:13:19 -08:00
microDev
dc332baa87
update common_hal_reset_pin()
2020-12-28 20:04:00 +05:30
Dan Halbert
a11ad25727
BLE fixes
2020-12-23 16:39:27 -05:00
Dan Halbert
8b7c23c1ee
address review comments
2020-12-01 20:01:14 -05:00
Dan Halbert
104a089677
deep sleep working; deep sleep delay when connected
2020-11-26 22:06:37 -05:00
Dan Halbert
a0f1ec3c4a
wip
2020-11-22 19:10:09 -05:00
Dan Halbert
75559f35cc
wip: ResetReason to microcontroller.cpu
2020-11-21 23:29:52 -05:00
Dan Halbert
5bb3c321e9
merge from main
2020-11-19 00:29:14 -05:00
Scott Shawcroft
66fb095069
Merge pull request #3667 from microDev1/watchdog-s2
...
ESP32S2: Support for WatchDog
2020-11-16 15:01:54 -08:00
Dan Halbert
ffff02c053
Merge remote-tracking branch 'adafruit/main' into sleep
2020-11-16 12:06:11 -05:00
Scott Shawcroft
68eb809fbf
Update parallel bus signatures
2020-11-13 18:57:52 -08:00
microDev
10e8b8cf45
move port specific check
2020-11-11 00:24:01 +05:30
microDev
930cf14dce
Add check for invalid io, function to disable all alarms
2020-10-27 16:17:26 -07:00
microDev
e35938971a
Add description of alarm modules
2020-10-27 16:16:55 -07:00
Scott Shawcroft
9fcf96cb64
Replace _bleio.ConnectionError with the native version
...
Replace uses of _bleio.ConnectionError with regular ConnectionError
Fixes #3008
2020-10-07 17:11:32 -07:00
Jeff Epler
b3bdd4686b
PacketBuffer: add missing 'break's, remove unneeded {}
2020-09-13 15:10:38 -05:00
Scott Shawcroft
9e722c8c99
Merge pull request #3375 from DavePutz/issue3296
...
Correction for Issue #3296 - ble hanging on nrf52840
2020-09-10 12:36:17 -07:00
root
2690faec43
Moved checks for invalid pin to common-hal/microcontroller/Pin.c
2020-09-05 11:42:06 -05:00
root
ed6cc64c49
Corrected issue with BLE not working on nrf52840
2020-09-04 16:59:41 -05:00
Dan Halbert
6dbd369272
merge from upstream
2020-08-30 14:39:03 -04:00
Lucian Copeland
8021da08d3
Fix problematic whitespace on pulseout parameter errors
2020-08-27 11:07:47 -04:00
Scott Shawcroft
1527a3ce92
Merge remote-tracking branch 'adafruit/main' into add_pwmio
2020-08-24 18:25:18 -07:00
Scott Shawcroft
644d2ba7a2
Add more "extern" declarations for gcc10 compat
...
gcc has tightened the restrictions on forward declarations that lack
"extern". Fix them up.
2020-08-21 14:39:37 -05:00
Scott Shawcroft
a5b01f7361
Merge remote-tracking branch 'adafruit/main' into add_pwmio
2020-08-21 11:13:53 -07:00
Dan Halbert
f714f53552
Merge remote-tracking branch 'adafruit/main' into ble_hci
2020-08-21 10:45:05 -04:00
Dan Halbert
0e30dd8bcc
merge from upstream; working; includes debug_out code for debugging via Saleae for posterity
2020-08-20 20:29:57 -04:00
Scott Shawcroft
400701004b
Merge pull request #3279 from hierophect/esp32-pulseinout
...
ESP32-S2: Add PulseOut and PulseIn
2020-08-20 11:24:08 -07:00
Scott Shawcroft
6857f98426
Split pulseio.PWMOut into pwmio
...
This gives us better granularity when implementing new ports because
PWMOut is commonly implemented before PulseIn and PulseOut.
Fixes #3211
2020-08-18 13:08:33 -07:00
Lucian Copeland
da75445cd5
Style changes, reposition runtime errors
2020-08-18 11:42:06 -04:00
Dan Halbert
94ecf33a5c
Merge pull request #3281 from dhalbert/fix-spim3-buffer-location
...
SPIM3 buffer must be in first 64kB of RAM
2020-08-17 19:28:03 -04:00
Scott Shawcroft
377503e61c
Merge pull request #3284 from dhalbert/fix-3171-evt-handler
...
Remove event handler before setting it to NULL
2020-08-17 15:02:29 -07:00
Dan Halbert
ef40f83f99
Remove event handler before setting it to NULL
2020-08-15 14:39:53 -04:00
Dan Halbert
cf0f3d70b5
SPIM3 buffer must be in first 64kB of RAM
2020-08-15 10:31:56 -04:00
Lucian Copeland
0fc730bc5a
Expand PulseOut API, debug cleanup
2020-08-14 16:36:02 -04:00
