Commit Graph

109 Commits

Author SHA1 Message Date
hathach
fecc1bdedb
fix typos (partial) detected by codepell 2023-03-18 22:17:02 +07:00
Dan Halbert
d8231f1588 Implement safemode.py 2023-02-13 18:26:38 -05:00
MicroDev
d9d94eacca
run updated pre-commit 2023-02-01 13:38:41 +05:30
Scott Shawcroft
987d9a31c8
Fix pin_or_none 2023-01-12 16:03:45 -08:00
Dan Halbert
a974402542 Improve type validation errors messages, especially for pins 2023-01-10 15:02:55 -05:00
Dan Halbert
03b43b7b3f complete rework for microcontroller.cpu.frequency and wifi.radio MAC addresses 2023-01-02 11:45:58 -05:00
Dan Halbert
a3adcf0e1a clarify read-only mac address; reuse translate msgs 2023-01-02 10:13:20 -05:00
Jeff Epler
8658e7a954
re-use length validator 2022-11-30 12:06:18 -06:00
Dan Halbert
fed77e918a Fix formatting of "Limitations:" in a couple of modules
When "Limitations:" is in the class docstring, it is sometimes taken
as a class attribute name because of the colon. When exactly is not clear, but
changing embedded colons or various indentations fixes the problem.
2022-10-26 12:33:16 -04:00
Dan Halbert
01c15a1d1b catalog implementation limitations in documentation 2022-10-21 13:58:34 -04:00
Dan Halbert
ead03cd96f add caveat in documentation 2022-10-13 11:47:10 -04:00
Jeff Epler
907c5d387f
Tweak black_bindings
Originally, black_bindings found each contiguous "//|" block and sent
it to black independently. This was slower than it needed to be.

Instead, swap the comment prefix: when running black, take off
"//|" prefixes and put "##|" prefixes on all un-prefixed lines.
Then, after black is run, do the opposite operation

This more than doubles the overall speed of "pre-commit run --all",
from 3m20s to 55s CPU time on my local machine (32.5s to under 10s
"elapsed" time)

It also causes a small amount of churn in the bindings, because
black now sees enough context to know whether one 'def' follows another
or ends the 'def's in a 'class'. In the latter case, it adds an extra
newline, which becomes a "//|" line.

I'm less sure why a trailing comma was omitted before down in
rp2pio/StateMachine.c but let's roll with it.
2022-09-30 11:18:13 -05:00
Dan Halbert
db065a299f
Merge pull request #6933 from jepler/🥧🐮
Implement a useful subset of `wifi` and `socketpool` modules on 🥧🐮
2022-09-28 18:09:24 -04:00
Jeff Epler
346fff2e7c
cyw43 basic gpio support, hwaddr in boot_out 2022-09-28 10:06:33 -05:00
Jeff Epler
b2cc8d2aad
run black_bindings across all bindings 2022-09-27 15:21:42 -05:00
Scott Shawcroft
9d10a3da66
Conditionalize LTO 2022-05-27 12:59:54 -07:00
Dan Halbert
f63b26c534 address jepler's comments and further squeezes 2022-05-20 10:10:55 -04:00
Dan Halbert
a01dec1df9 message consolidation and more use of validators 2022-05-19 15:38:37 -04:00
Alec Delaney
b035277e15
Mention other hardware in microcontroller module 2022-05-12 15:33:11 -04:00
Dan Halbert
5edc59f070
Merge pull request #6337 from jepler/property-storage
Optimize flash storage of properties
2022-05-06 09:55:18 -04:00
Dan Halbert
68acd14342 use generic hash routine where possible 2022-05-03 19:11:54 -04:00
Dan Halbert
9717fd235d make Pin hashable 2022-05-03 15:28:42 -04:00
Jeff Epler
78cf0a90af
Make MP_PROPERTY_GETTER / _GETSET fully declare the property
This will enable setting data attributes, namely, the section of the
symbol.
2022-05-03 08:48:53 -05:00
Jeff Epler
31da335cac
Introduce, use MP_PROPERTY_GETTER, _GETSET
Later, these can be changed in cunning ways to save flash storage.
2022-05-03 08:48:52 -05:00
mjs513
2e9e29bf1b Delete Left Over Comments 2022-04-20 04:10:16 -04:00
mjs513
fd41c1ac5b Update based on PR Comments 2022-04-14 06:45:16 -04:00
mjs513
7a30176b49 Fix Build Errors for Other Boards 2022-04-13 13:44:22 -04:00
root
716497c132 corrected pre-commit errors 2022-04-13 12:04:28 -04:00
root
60e330fb0d Added Settable Clock for MIMXRT BOARDS 2022-04-13 09:47:55 -04:00
Timon
a1052d5f73
Initial broadcom port for Raspberry Pi
This targets the 64-bit CPU Raspberry Pis. The BCM2711 on the Pi 4
and the BCM2837 on the Pi 3 and Zero 2W. There are 64-bit fixes
outside of the ports directory for it.

There are a couple other cleanups that were incidental:
* Use const mcu_pin_obj_t instead of omitting the const. The structs
  themselves are const because they are in ROM.
* Use PTR <-> OBJ conversions in more places. They were found when
  mp_obj_t was set to an integer type rather than pointer.
* Optimize submodule checkout because the Pi submodules are heavy
  and unnecessary for the vast majority of builds.

Fixes #4314
2021-11-22 14:54:44 -08:00
Robert Pafford
65f8804816
Implement reset_reason for raspberrypi port 2021-09-08 18:34:34 -04:00
Rob Capellini
b8f2799609 Convert more modules to use MP_REGISTER_MODULE
Convert bitbangio, bitmaptools, _bleio, board, busio, countio, digitalio, framebufferio, frequencyio, gamepadshift, getpass, keypad, math, microcontroller, and msgpack modules to use MP_REGISTER_MODULE.

Related to #5183.
2021-08-26 21:35:02 -04:00
gamblor21
47db00f0af Made error message clear and reduce calls 2021-08-19 20:03:49 -05:00
gamblor21
e5dc722176 Fix for int type and pin validation 2021-08-17 19:16:26 -05:00
gamblor21
168ed355b1 Made check function generic 2021-08-17 17:55:26 -05:00
microDev
9ac607dffa
update run-mode
- add microcontroller.RunMode.UF2
- add UF2, NORMAL and BOOTLOADER run-modes to esp32s2
2021-07-18 00:00:58 +05:30
Jeff Epler
268717e427 ParallelImageCapture: Switch to taking a list of pins
.. adopting validate_pins from RGBMatrix into shared-bindings

.. updating other platforms for API change
2021-06-10 11:15:18 -05:00
Scott Shawcroft
3fda0c0a1b
Fix board builds and use MP_ERROR_TEXT in py and extmod 2021-05-05 17:51:52 -07:00
Scott Shawcroft
f0bb26d70f
Merge MicroPython 1.13 into CircuitPython 2021-05-04 18:06:33 -07:00
Scott Shawcroft
76033d5115
Merge MicroPython v1.11 into CircuitPython 2021-04-26 15:47:41 -07:00
microDev
a52eb88031
run code formatting script 2021-03-15 19:27:36 +05:30
root
e1838ff335 Fix typo in documentation. 2021-01-29 11:57:36 -06:00
root
cfd6ffc649 Adding files for cpu temperature fix 2021-01-28 16:06:30 -06:00
root
ccdc97d23e Update documentation for microprossors with multiple cpus 2021-01-26 09:47:21 -06:00
Scott Shawcroft
2b4ad1ed03
Fix warnings that come from -O3 (I think) 2021-01-20 19:16:56 -08:00
Scott Shawcroft
733094aead
Add initial RP2040 support
The RP2040 is new microcontroller from Raspberry Pi that features
two Cortex M0s and eight PIO state machines that are good for
crunching lots of data. It has 264k RAM and a built in UF2
bootloader too.

Datasheet: https://pico.raspberrypi.org/files/rp2040_datasheet.pdf
2021-01-20 19:16:56 -08:00
Dan Halbert
9391c8f9dd Make ResetReason and RunReason available 2020-12-06 12:00:00 -05:00
Dan Halbert
65e2fe4654 fix stub problems; touch up doc 2020-11-27 23:27:15 -05:00
Dan Halbert
104a089677 deep sleep working; deep sleep delay when connected 2020-11-26 22:06:37 -05:00
Dan Halbert
f868cc5dd0 some API renaming and bug fixes; fix docs 2020-11-24 23:37:05 -05:00