0d743224f2
add countio to nrf port
2021-04-14 01:37:19 +02:00
b273f59c4e
Assume max characteristic size when the client
2021-04-13 15:37:47 -07:00
6e9429d779
soft reboot for pretending deep sleep.
2021-04-12 20:53:14 +09:00
15764b4c24
Merge remote-tracking branch 'upstream/main' into nrf52-sleep
2021-04-09 13:48:45 -04:00
1b60c9d033
Merge pull request #4580 from jepler/incrementalencoder-refactor
...
IncrementalEncoder: factor out the quadrature state machine
2021-04-09 13:10:02 -04:00
61e33a5619
fix nrf ISR; make direction consistent across ports; save code size
2021-04-09 11:07:47 -04:00
72055ff02b
Merge pull request #4578 from tannewt/packetbuffer_lengths
...
Improve PacketBuffer lengths and remove packet_size
2021-04-08 18:55:24 -04:00
d69ca4a8ae
nrf: switch to shared softencoder implementation
2021-04-08 16:36:10 -05:00
e3b3f97fa6
Improve PacketBuffer packet lengths for remote service
2021-04-08 13:25:11 -07:00
1afd204828
Changed error message to display the generic term 'system firmware' instead of the Nordic specific term 'soft device'
2021-04-02 20:34:37 +02:00
58835e5a5b
Two small PacketBuffer fixes
...
1. Allow for ctrl-c during a write.
2. Handle disconnects when acting as a client.
2021-04-01 14:16:35 -07:00
0752bbd5fd
Fix central pairing and crash on clear
...
The list_clear would crash if we tried to clear a NULL list. (It
can happen if we haven't tried to discover any services.)
2021-03-31 16:04:04 -07:00
0890b54cd9
More formatting
2021-03-16 08:29:04 -05:00
fb437d8280
Formatting fixes
2021-03-16 08:22:02 -05:00
e326d7ca80
Merge branch 'main' into rp_dp_parallel
2021-03-15 20:00:13 -05:00
a52eb88031
run code formatting script
2021-03-15 19:27:36 +05:30
56a219911f
Add frequency support to parallel bus
2021-03-11 19:32:43 -06:00
c8f36e604c
reset myself, not go REPL, after wakeup from deep sleep.
2021-03-09 00:42:22 +09:00
51c7a49853
Merge branch 'main' into nrf52-sleep
2021-03-07 20:50:53 +09:00
2eed9a1735
old System OFF sleep code for future reference.
2021-03-07 20:21:33 +09:00
2795c002ad
disable QSPI while system ON idle loop.
2021-03-07 19:14:04 +09:00
3fab9f8b1b
new wait-until-alarm design, don't use System OFF.
2021-03-07 01:09:54 +09:00
e0b96c0f43
[nrf] No need to store `buffer_length` as part of `audiopwmio_pwmaudioout_obj_t`
2021-03-05 06:01:58 -05:00
238484ec26
Merge remote-tracking branch 'origin/main' into update-protomatter-rp2
2021-03-01 15:18:32 -06:00
7cecd99658
remove unused debug printf's.
2021-02-28 16:04:29 +09:00
3e47e00291
address the pretending-to-deep-sleep issue.
2021-02-28 15:57:37 +09:00
498debc826
remove unused debug printf's.
2021-02-28 15:37:25 +09:00
1d1ff5f308
Merge remote-tracking branch 'origin/main' into update-protomatter-rp2
2021-02-26 09:56:35 -06:00
3f08cb47b8
Merge remote-tracking branch 'adafruit/main' into busio-uart-rp
2021-02-25 16:59:15 -08:00
0f8c96f424
remove trailing whitespaces.
2021-02-26 09:11:35 +09:00
7fd4648cd5
rase error if Alarm time >= 512 sec.
2021-02-26 09:06:11 +09:00
277a67d876
call touchalarm funcs as well as pin/timealarm.
2021-02-26 08:11:50 +09:00
2aa5aec0d5
cleanup.
2021-02-26 01:45:12 +09:00
c713d31d0d
move externs to .h
2021-02-26 01:20:55 +09:00
c86ca2a4ff
move externs to .h
2021-02-26 00:51:52 +09:00
9328d09a7a
re-enable parameters check.
2021-02-26 00:50:44 +09:00
61a69daae1
raise NotImplementedError when construct TouchAlarm.
2021-02-25 08:19:03 +09:00
5d7fdafcde
implement suggested changes
...
- add internal buffering
- rtc initialization fix
2021-02-25 00:48:36 +05:30
f66896ce32
use nRF SDK function to set up memory retention.
2021-02-25 02:34:43 +09:00
9661d67cd3
replace MY_DEBUG_UART -> NRF_DEBUG_PRINT.
2021-02-25 01:49:57 +09:00
0f188befb6
set RAM retention just before deep sleep
2021-02-24 00:12:25 +09:00
ec64fa6a29
move dump_xxx functions to debug_uart.c.
2021-02-23 12:16:37 +09:00
9df0f439f3
alarm/pin/__init__.c is no longer used.
2021-02-23 10:31:49 +09:00
1da8b9900a
Merge branch 'main' into nrf52-sleep
2021-02-21 13:35:06 +09:00
36c59250dd
some cleanups.
2021-02-21 09:57:14 +09:00
793198909e
set SleepMemory size to 256 bytes.
2021-02-21 08:19:39 +09:00
41d9d4e0ab
call sd API only when sd enabled.
2021-02-21 08:17:57 +09:00
26f8f532f1
safe mode fix.
2021-02-21 00:47:07 +09:00
5c37b73c6d
fix typo to fix nrf builds
2021-02-18 11:09:32 -05:00
cf2427c561
light sleep reason fix.
2021-02-17 21:51:28 +09:00
e6350ff834
Initial commit.
2021-02-17 20:53:18 +09:00
d54b5861a3
wip
2021-02-12 19:01:14 -05:00
ff1942cff6
Enable protomatter on RP2040 builds
...
Also found a race condition between timer_disable and redraw, which
would happen if I debugger-paused inside common_hal_rgbmatrix_timer_disable
or put a delay or print inside it. That's what pausing inside reconstruct
fixes.
So that the "right timer" can be chosen, `timer_allocate` now gets the `self`
pointer. It's guaranteed at this point that the pin information is accurate,
so you can e.g., find a PWM unit related to the pins themselves.
This required touching each port to add the parameter even though it's
unused everywhere but raspberrypi.
2021-02-12 08:25:15 -06:00
f0564b4986
merge from upstream; complicated webusb merge
2021-02-11 18:50:02 -05:00
1b7f3d11e7
wip
2021-02-08 10:57:41 -05:00
2656c84b01
Initial commit. Edited error messages in .c files
2021-02-03 05:49:40 +07:00
16d54586c1
remove long read error message
2021-01-27 09:20:45 -08:00
e27dd26dc7
make translate, BEWARE adds the 'world'
2021-01-18 11:26:39 -08:00
07a9593abc
add flow control info to busio_uart_obj_t
2021-01-17 19:33:32 -08:00
ccace62ac9
don't check length for remote characteristic or dedescriptor
2021-01-13 15:35:51 -05:00
a397af9bdf
Round BLE timing values; fix timeout check
2021-01-10 13:16:19 -05:00
c7dc5f2507
support RTS/CTS hardware flow control
2021-01-07 14:13:19 -08:00
dc332baa87
update common_hal_reset_pin()
2020-12-28 20:04:00 +05:30
a11ad25727
BLE fixes
2020-12-23 16:39:27 -05:00
8b7c23c1ee
address review comments
2020-12-01 20:01:14 -05:00
104a089677
deep sleep working; deep sleep delay when connected
2020-11-26 22:06:37 -05:00
a0f1ec3c4a
wip
2020-11-22 19:10:09 -05:00
75559f35cc
wip: ResetReason to microcontroller.cpu
2020-11-21 23:29:52 -05:00
5bb3c321e9
merge from main
2020-11-19 00:29:14 -05:00
66fb095069
Merge pull request #3667 from microDev1/watchdog-s2
...
ESP32S2: Support for WatchDog
2020-11-16 15:01:54 -08:00
ffff02c053
Merge remote-tracking branch 'adafruit/main' into sleep
2020-11-16 12:06:11 -05:00
68eb809fbf
Update parallel bus signatures
2020-11-13 18:57:52 -08:00
10e8b8cf45
move port specific check
2020-11-11 00:24:01 +05:30
930cf14dce
Add check for invalid io, function to disable all alarms
2020-10-27 16:17:26 -07:00
e35938971a
Add description of alarm modules
2020-10-27 16:16:55 -07:00
9fcf96cb64
Replace _bleio.ConnectionError with the native version
...
Replace uses of _bleio.ConnectionError with regular ConnectionError
Fixes #3008
2020-10-07 17:11:32 -07:00
b3bdd4686b
PacketBuffer: add missing 'break's, remove unneeded {}
2020-09-13 15:10:38 -05:00
9e722c8c99
Merge pull request #3375 from DavePutz/issue3296
...
Correction for Issue #3296 - ble hanging on nrf52840
2020-09-10 12:36:17 -07:00
2690faec43
Moved checks for invalid pin to common-hal/microcontroller/Pin.c
2020-09-05 11:42:06 -05:00
ed6cc64c49
Corrected issue with BLE not working on nrf52840
2020-09-04 16:59:41 -05:00
6dbd369272
merge from upstream
2020-08-30 14:39:03 -04:00
8021da08d3
Fix problematic whitespace on pulseout parameter errors
2020-08-27 11:07:47 -04:00
1527a3ce92
Merge remote-tracking branch 'adafruit/main' into add_pwmio
2020-08-24 18:25:18 -07:00
644d2ba7a2
Add more "extern" declarations for gcc10 compat
...
gcc has tightened the restrictions on forward declarations that lack
"extern". Fix them up.
2020-08-21 14:39:37 -05:00
a5b01f7361
Merge remote-tracking branch 'adafruit/main' into add_pwmio
2020-08-21 11:13:53 -07:00
f714f53552
Merge remote-tracking branch 'adafruit/main' into ble_hci
2020-08-21 10:45:05 -04:00
0e30dd8bcc
merge from upstream; working; includes debug_out code for debugging via Saleae for posterity
2020-08-20 20:29:57 -04:00
400701004b
Merge pull request #3279 from hierophect/esp32-pulseinout
...
ESP32-S2: Add PulseOut and PulseIn
2020-08-20 11:24:08 -07:00
6857f98426
Split pulseio.PWMOut into pwmio
...
This gives us better granularity when implementing new ports because
PWMOut is commonly implemented before PulseIn and PulseOut.
Fixes #3211
2020-08-18 13:08:33 -07:00
da75445cd5
Style changes, reposition runtime errors
2020-08-18 11:42:06 -04:00
94ecf33a5c
Merge pull request #3281 from dhalbert/fix-spim3-buffer-location
...
SPIM3 buffer must be in first 64kB of RAM
2020-08-17 19:28:03 -04:00
377503e61c
Merge pull request #3284 from dhalbert/fix-3171-evt-handler
...
Remove event handler before setting it to NULL
2020-08-17 15:02:29 -07:00
ef40f83f99
Remove event handler before setting it to NULL
2020-08-15 14:39:53 -04:00
cf0f3d70b5
SPIM3 buffer must be in first 64kB of RAM
2020-08-15 10:31:56 -04:00
0fc730bc5a
Expand PulseOut API, debug cleanup
2020-08-14 16:36:02 -04:00
52990a332d
fix
2020-08-14 17:48:15 +08:00
e7da652711
able to change ble mac address
2020-08-13 16:54:29 +08:00
44c9c43cd1
ble_uart_echo_test works
2020-08-13 00:03:39 -04:00
32fc8b0676
nrf: reset_pin_number: reset pin clears never-reset, mirroring samd
2020-08-12 07:32:18 -05:00
760a171903
nrf: Make port build with -Werror=undef
...
.. build-tested on particle_xenon
2020-08-12 07:32:18 -05:00
Neradoc
Scott Shawcroft
jun2sak
Lucian Copeland
Dan Halbert
Dan Halbert
Jeff Epler
Jonny Bergdahl
gamblor21
Mark
microDev
Artyom Skrobov
BiffoBear
Bernhard Boser
Scott Shawcroft
root
Yihui Xiong