The RP2040 is new microcontroller from Raspberry Pi that features
two Cortex M0s and eight PIO state machines that are good for
crunching lots of data. It has 264k RAM and a built in UF2
bootloader too.
Datasheet: https://pico.raspberrypi.org/files/rp2040_datasheet.pdf
Several issues have been found in the implementation. While they're
unresolved, it may be better to disable the built-in module. (This
means that to work on fixing the module, it'll be necessary to
revert this commit)
* Better messaging when code is stopped by an auto-reload.
* Auto-reload works during sleeps on ESP32-S2. Ticks wake up the
main task each time.
* Made internal naming consistent. CamelCase Python names are NOT
separated by an underscore.
This changes lots of files to unify `board.h` across ports. It adds
`board_deinit` when CIRCUITPY_ALARM is set. `main.c` uses it to
deinit the board before deep sleeping (even when pretending.)
Deep sleep is now a two step process for the port. First, the
port should prepare to deep sleep based on the given alarms. It
should set alarms for both deep and pretend sleep. In particular,
the pretend versions should be set immediately so that we don't
miss an alarm as we shutdown. These alarms should also wake from
`port_idle_until_interrupt` which is used when pretending to deep
sleep.
Second, when real deep sleeping, `alarm_enter_deep_sleep` is called.
The port should set any alarms it didn't during prepare based on
data it saved internally during prepare.
ESP32-S2 sleep is a bit reorganized to locate more logic with
TimeAlarm. This will help it scale to more alarm types.
Fixes#3786
This allows calls to `allocate_memory()` while the VM is running, it will then allocate from the GC heap (unless there is a suitable hole among the supervisor allocations), and when the VM exits and the GC heap is freed, the allocation will be moved to the bottom of the former GC heap and transformed into a proper supervisor allocation. Existing movable allocations will also be moved to defragment the supervisor heap and ensure that the next VM run gets as much memory as possible for the GC heap.
By itself this breaks terminalio because it violates the assumption that supervisor_display_move_memory() still has access to an undisturbed heap to copy the tilegrid from. It will work in many cases, but if you're unlucky you will get garbled terminal contents after exiting from the vm run that created the display. This will be fixed in the following commit, which is separate to simplify review.
`pow(a, b, c)` can compute `(a ** b) % c` efficiently (in time and memory).
This can be useful for extremely specific applications, like implementing
the RSA cryptosystem. For typical uses of CircuitPython, this is not an
important feature. A survey of the bundle and learn system didn't find
any uses.
Disable it on M0 builds so that we can fit in needed upgrades to the USB
stack.
Disable certain classes of diagnostic when building ulab. We should
submit patches upstream to (A) fix these errors and (B) upgrade their
CI so that the problems are caught before we want to integrate with
CircuitPython, but not right now.
I like to use local makefile overrides, in the file GNUmakefile
(or, on case-sensitive systems, makefile) to set compilation choices.
However, writing
TRANSLATION := de_DE
include Makefile
did not work, because py.mk would override the TRANSLATION := specified
in an earlier part of the makefiles (but not from the commandline).
By using ?= instead of := the local makefile override works, but when
TRANSLATION is not specified it continues to work as before.
This ensures that only the translate("") alternative that will be used
is seen after preprocessing. Improves the quality of the Huffman encoding
and reduces binary size slightly.
Also makes one "enhanced" error message only occur when ERROR_REPORTING_DETAILED:
Instead of the word-for-word python3 error message
"Type object has no attribute '%q'", the message will be
"'type' object has no attribute '%q'". Also reduces binary size.
(that's rolled into this commit as it was right next to a change to
use the preprocessor for MICROPY_ERROR_REPORTING)
Note that the odd semicolon after "value_error:" in parsenum.c is necessary
due to a detail of the C grammar, in which a declaration cannot follow
a label directly.
This reclaims over 1kB of flash space by simplifying certain exception
messages. e.g., it will no longer display the requested/actual length
when a fixed list/tuple of N items is needed:
if (MICROPY_ERROR_REPORTING == MICROPY_ERROR_REPORTING_TERSE) {
mp_raise_ValueError(translate("tuple/list has wrong length"));
} else {
mp_raise_ValueError_varg(translate("requested length %d but object has length %d"),
(int)len, (int)seq_len);
Other chip families including samd51 keep their current error reporting
capabilities.
* No weak link for modules. It only impacts _os and _time and is
already disabled for non-full builds.
* Turn off PA00 and PA01 because they are the crystal on the Metro
M0 Express.
* Change ejected default to false to move it to BSS. It is set on
USB connection anyway.
* Set sinc_filter to const. Doesn't help flash but keeps it out of
RAM.
Kevin Matocha
Dan Halbert
Jeff Epler
Jeff Epler
Bernhard Boser
Kevin Banks
Lucian Copeland
Dan Halbert
Scott Shawcroft
Scott Shawcroft
gamblor21
Hugo Dahl
iot49
microDev
Jeff Epler
Bernhard Boser
Mark
Christian Walther
root