djsundog/circuitpython
1
0
Fork 0
Code Issues Pull Requests Packages Projects Releases Wiki Activity
24,514 Commits 21 Branches 274 Tags 785 MiB
e3fa6e2c35
Commit Graph

7006 Commits

Author SHA1 Message Date
Scott Shawcroft
e3fa6e2c35
Merge pull request #5089 from tannewt/disable_ble_workflow 
Add ability to disable BLE workflow
 2021-08-05 11:21:17 -07:00
Dan Halbert
81833035fc raytac_mdbt50q-rx 2021-08-04 15:47:19 -04:00
Scott Shawcroft
1e225610cc
Add ability to disable BLE workflow 
Call `supervisor.disable_ble_workflow()` and the BLE workflow will
be disabled until the chip is reset.

This also includes a couple fixes:
1. Terminals can now be deinit by setting the tilegrid to NULL. This
  prevents using the tilegrid before display is init.
2. Fix BLE serial send amount when sending more than a single packet.

Fixes #5049
 2021-08-02 18:37:19 -07:00
Scott Shawcroft
686103fd8e
Merge pull request #5085 from dhalbert/board-specific-pico-sdk-settings 
Add board-specific pico-sdk settings; set xosc multipler for Adafruit boards
 2021-08-02 10:53:54 -07:00
Dan Halbert
a358e5f58a Add board-specific pico-sdk settings; set xosc multipler for Adafruit boards 2021-07-30 18:50:21 -04:00
Lucian Copeland
da149b0a42 Merge remote-tracking branch 'upstream/main' into stm32-sleepmem 2021-07-30 15:35:55 -04:00
Scott Shawcroft
bfe29786ce
Merge pull request #5074 from tannewt/break_deep_sleep 
Fix a couple fake sleep bugs on nrf and esp
 2021-07-30 09:19:08 -07:00
Scott Shawcroft
d5cdceb9b9
Use all 4 status pixels on neotrinkey too 2021-07-28 14:25:21 -07:00
Scott Shawcroft
bc0f8ac55d
Use all four LEDs for status on MagTag 
Fixes #5051
 2021-07-28 14:17:31 -07:00
Scott Shawcroft
cdf978f3af
Fix a couple fake sleep bugs on nrf and esp 
On ESP ctrl-c during fake sleep will now stop the sleep. A crash
on real deep sleep is now fixed as well. (Exception string saving
was crashing on reading the deep sleep exception.) Fixes #4010

This also fixes nRF fake sleep after the first time. The internal
variable wasn't being reset early enough. Fixes #4869
 2021-07-28 13:27:48 -07:00
Dan Halbert
e9369d50e1
Merge pull request #5067 from tannewt/pulseout_switch 
Switch to pin, frequency and duty_cycle PulseOut
 2021-07-28 14:58:06 -04:00
Scott Shawcroft
9e54606ba1
Set output low in SIO 2021-07-28 09:00:36 -07:00
Scott Shawcroft
4be904fd4a
Switch to gpio mux to disable/enable pwm signal 2021-07-27 12:38:18 -07:00
Scott Shawcroft
e87e1d8175
Block when setting duty_cycle until the new value is taken 2021-07-27 12:37:35 -07:00
Kattni
fc59a7ac02
Merge pull request #5068 from dhalbert/remove-gamepad 
remove gamepad; deprecate gamepadshift
 2021-07-27 11:35:06 -04:00
Kattni
460643f983
Merge pull request #5066 from dhalbert/led-everywhere 
add board.LED wherever possible
 2021-07-27 11:18:47 -04:00
Kamil Tomaszewski
ff65863719 spresense: update SDK to 2.2.0 2021-07-27 11:25:51 +02:00
Dan Halbert
b0fb709d83 more gamepad removal 2021-07-26 23:34:25 -04:00
Dan Halbert
901a6c27c0 remove gamepad; deprecate gamepadshift 2021-07-26 22:15:09 -04:00
Scott Shawcroft
daf90aae83
Merge remote-tracking branch 'adafruit/main' into pulseout_switch 2021-07-26 18:48:59 -07:00
Scott Shawcroft
412eb87080
Switch to pin, frequency and duty_cycle PulseOut 
Passing in a PWMOut still works but is deprecated. It will be
removed in CircuitPython 8.0.0

This also switches STM32 timer indices and channel indices to
0-based in our pin data rather than `- 1` everywhere. The latter is
more bug prone.

Most of the way for #3264

Tested on Metro M0, Metro M4, Feather S2, Feather nRF52840, Feather
STM32F4 and Arduino RP2040.
 2021-07-26 18:35:49 -07:00
Dan Halbert
11ca505fdb add board.LED wherever possible 2021-07-26 19:57:12 -04:00
Scott Shawcroft
8258f51132
Merge pull request #5061 from evildave666/blackpill-remove-nvm 
remove unused nvm reserved space from stm32f411ce_blackpill_with_flash
 2021-07-26 14:13:29 -07:00
Jeff Epler
b9fa06cf6b
Merge pull request #5056 from cdwilson/cdwilson/circuitpython/fix-feather-stm32f405-express-can-pins 
Fix CAN pin assignment on Feather STM32F405 Express board.
 2021-07-26 09:00:11 -05:00
evildave666
f059bab253 Modify mpconfigboard.mk to point to the new linker file and re-include modules 2021-07-26 14:13:41 +09:00
evildave666
57c6279b40 Added new linker file 2021-07-26 13:59:25 +09:00
lady ada
f3a286a7ea can we add busdevice and have room? 2021-07-25 14:45:35 -04:00
Chris Wilson
49dc5805ee Fix CAN pin assignment on Feather STM32F405 Express board. 2021-07-24 22:01:50 -07:00
Tod Kurt
0d401e7bc8 fix whitespace on new flash chip for Arduino Nano RP2040 2021-07-24 13:22:02 -07:00
Tod Kurt
dcd5b5ab50 added Arduino Nano RP2040 Connect alternate flash chip 2021-07-24 13:12:44 -07:00
Scott Shawcroft
70cbb4eddb
Support multiple status neopixels 
Use the 10 neopixels on the playgrounds for status.

Fixes #5039
 2021-07-23 15:17:09 -07:00
microDev
c9ac8e77e8
Merge pull request #5042 from NathanY3G/add-support-for-jmp-pin 
Added support for specifying the JMP pin (RP2 PIO)
 2021-07-23 18:15:43 +05:30
Nathan Young
04ce6a6e8c Check jmp_pin specified when JMP PIN opcodes used 2021-07-23 13:35:20 +02:00
microDev
e790ff7327
Merge pull request #5036 from tannewt/esp_oserror0 
Remove OSError(0) and old network modules
 2021-07-23 11:00:56 +05:30
Scott Shawcroft
beda1f7998
Merge pull request #5037 from hierophect/getprevtraceback 
Add supervisor.get_previous_traceback() function.
 2021-07-22 17:00:14 -07:00
Lucian Copeland
ace04ef600 Formatting fixes 2021-07-22 12:57:10 -04:00
Nathan Young
8221a12cf6 Added support for specifying the JMP pin (RP2 PIO) 2021-07-22 18:39:04 +02:00
Scott Shawcroft
f84cb94819
Remove OSError(0) and old network modules 
The newer modules are `socketpool` and `ssl`.

Fixes #3924, related to #2021, closes #1880, closes #2273, closes #2274
 2021-07-21 17:33:40 -07:00
Scott Shawcroft
109bd2886b
Fix Arduino RP2040 flash size 
For RP2040 boards, we now change the default flash size based on
the configured flash. We will still try to read the size from the
flash first.

Fixes #4874
 2021-07-21 11:02:55 -07:00
Scott Shawcroft
8723a0335f
Merge pull request #5032 from DavePutz/multi_pulseout 
Moved global variables to support multiple RP2040 PulseOuts
 2021-07-21 10:26:17 -07:00
Scott Shawcroft
e14923028f
Merge pull request #5030 from dhalbert/update-to-raspberrypi-pico-sdk-1.2.0 
Update pico-sdk to 1.2.0, using raspberrypi repo
 2021-07-21 08:14:13 -07:00
root
b2d6203c63 fix formatting 2021-07-21 10:05:09 -05:00
root
0559fcd1c0 Moved global variables to support multiple PulseOuts 2021-07-21 09:52:17 -05:00
microDev
68070318f0
Merge pull request #5026 from tannewt/samd_uart 
Fix crash when UART construct fails
 2021-07-21 08:34:50 +05:30
Scott Shawcroft
db0adf1253
Merge pull request #5025 from DavePutz/issue_5016 
Turn off PWM pin during PulseOut construct
 2021-07-20 17:25:10 -07:00
Scott Shawcroft
fece0fb432
Fix crash when UART construct fails 
After the script stops with the exception thrown the final gc_sweep
will call any finalizers and they usually call deinit. deinit on
invalid objects can wreak havoc by changing random memory or
(hopefully) crashing. This fixes ensures the object is deinited
until initialization succeeds and the object is valid.

Do the same fix for I2C and SPI too.

Fixes #4700 and fixes #5005
 2021-07-20 17:15:19 -07:00
root
8fe4fa0114 Turn off PWN pin during PulseOut construct 2021-07-20 17:17:41 -05:00
Dan Halbert
0293ec261a Update pico-sdk to 1.2.0, using raspberrypi repo 2021-07-20 17:31:29 -04:00
Dan Halbert
ce7301527a
Merge pull request #5024 from tannewt/rp2_ble_wait 
Don't blink blue on non-BLE workflow boards
 2021-07-19 23:51:27 -04:00
Scott Shawcroft
f8290e746b
Don't blink blue on non-BLE workflow boards 
This includes any boards that have _bleio implemented via HCI.

Fixes #4969
 2021-07-19 18:40:37 -07:00