0ceac79dfb
Merge pull request #4048 from janderit/fix_3763_mimxrt10xx_spi
...
fixes: busio, SPI OS error 5 for mimxrt10xx
2021-02-08 16:29:48 -08:00
3c99b09993
Merge pull request #4160 from gamblor21/rp2040_neopixel_pin_fix
...
RP2040 Set the neopixel pin as output after PIO use
2021-02-08 17:57:30 -05:00
3a68ac8abb
Merge pull request #3536 from pewpew-game/pew-get-ticks
...
Fix #3504 : Don't use time module in pew.tick()
2021-02-08 17:50:44 -05:00
b0ed258302
Merge pull request #4155 from jepler/rpi-pio-background
...
rp2pio: Transfer up to 32 bytes before checking background tasks
2021-02-08 16:34:16 -05:00
f171660870
Merge pull request #4139 from hierophect/socket-accept-conn
...
Socket: Connect accepted sockets
2021-02-08 16:25:31 -05:00
be500fd15c
Merge pull request #4136 from hierophect/socket-portmax
...
Socket: fix inconsistencies in argument types
2021-02-08 16:23:20 -05:00
c8cf1258ac
Merge pull request #4154 from LuminousOwl/fix-max-pio-instructions
...
Fix maximum PIO instructions
2021-02-08 16:21:49 -05:00
386b49c3e1
Set the pin as output after PIO use
2021-02-08 15:13:37 -06:00
c3a1bd8f13
turn off brownout before deep sleep
2021-02-08 12:40:20 -05:00
1043d619fd
Merge pull request #4148 from Neradoc/fix-recv_into
...
Fix socket.recv_into receiving one less byte than expected
2021-02-08 11:29:41 -05:00
1b7f3d11e7
wip
2021-02-08 10:57:41 -05:00
5423e4966c
rp2pio: Transfer up to 32 bytes before checking background tasks
...
@Jerryneedell noticed that this problem affected strips short enough
to not use the DMA peripheral, thanks for the hot tip!
Instead of checking for background tasks after every byte transfer,
try up to 32 transfers before attending to background tasks.
This fixes the problem I was seeing on my 5-pixel circuit.
Closes #4135 .
2021-02-08 08:35:07 -06:00
5bf08c503b
adds: maximum retries on SPI busy
2021-02-07 17:06:46 +01:00
ae91b12aea
chore: whitespace fixed
2021-02-07 16:59:11 +01:00
127cc6204a
adds: idle loop to wait for SPI not busy (mimxrt10xx)
2021-02-07 16:59:11 +01:00
6be2466d6f
ESP32S2: Socket.recv_into only took len-1 bytes
2021-02-07 08:57:19 +01:00
ae262cde55
Fix maximum PIO instructions
2021-02-06 10:54:25 -05:00
22dc7d5359
Update to the very latest SDK w/GP15 restore
...
Also adds unique id support
Fixes #4039 and hopefully #4107
2021-02-05 18:44:06 -08:00
582bc59d39
Connect accepted sockets
2021-02-05 17:32:15 -05:00
c6a7b00030
Merge pull request #4137 from ferret-guy/smps-mode-pin-rpi-pico
...
Add SMPS mode pin to Raspi Pico pins.c
2021-02-05 12:12:55 -08:00
e7438c481e
Merge pull request #4125 from xorbit/main
...
Add A3 pin to Raspberry Pi Pico
2021-02-05 12:08:35 -08:00
a310d4336b
Merge pull request #4128 from hierophect/esp32s2-i2s-claimpin
...
ESP32S2: Add I2S pin claiming
2021-02-05 11:47:49 -08:00
8214d67e5f
Fix LWIP connect error report
2021-02-05 13:14:49 -05:00
1292c35d59
Add SMPS mode pin to Raspi Pico pins.c
...
Add SMPS mode pin to Raspi Pico pins.c; see section "4.3. Using the ADC" of the Pico datasheet for discussion.
Driving this pin high forces the onboard regulator into a lower noise PWM mode.
2021-02-05 11:09:40 -07:00
a158dde628
Add alternate name `VOLTAGE_MONITOR` for `A3`
2021-02-05 10:55:03 -07:00
4d26ffb447
Make timeout core types consistent
2021-02-05 12:32:41 -05:00
5bb722b927
Merge pull request #4122 from hathach/fix-3986
...
Fix 3986 background reset remove existing usb callback
2021-02-05 09:13:28 -05:00
0a55cfbde8
Merge pull request #4126 from FiriaCTO/webusb
...
WebUSB serial support (compile-time option, currently defaulted to OFF)
2021-02-05 09:11:43 -05:00
70e15d61b2
ports/atmel-samd/boards/dynalora_usb/board.c
2021-02-05 13:24:59 +01:00
54bd79a51a
LCD_MISO is not connected on board
2021-02-05 07:52:01 +01:00
25d456a5b8
shrink a couple of builds
2021-02-04 22:15:32 -05:00
0802b22ed6
usb descriptors all set; rework of enabling for USB devices
2021-02-04 19:23:40 -05:00
210d0f8798
Add I2S pin claiming
2021-02-04 16:30:05 -05:00
6e153d9948
raspberrypi: implement reset, reset_to_bootloader
...
This makes all the following work:
* normal microcontroller.reset()
* reset into safe mode or UF2 bootloader via microcontroller.on_next_reset()
* reset into UF2 bootloader via the "1200 baud trick"
The implementation of reset_cpu is from micropython.
2021-02-04 12:07:50 -06:00
d357a05870
Add A3 pin to Raspberry Pi Pico
...
We want to be able to use this to measure VSYS.
2021-02-04 10:44:37 -07:00
ff7b296b04
Add display init code for Lilygo TTGO T8 ESP32-S2
2021-02-04 16:46:15 +01:00
215a56c920
Merge branch 'main' into webusb (trying to get CI back online)
2021-02-03 16:48:28 -06:00
4eb396806c
Updated trinket_m0 make file to squeeze all translations as per Dan Halbert.
2021-02-03 11:47:56 +07:00
2656c84b01
Initial commit. Edited error messages in .c files
2021-02-03 05:49:40 +07:00
9140bfb5b2
Merge pull request #4049 from hierophect/sslsocket
...
Separate SSLSocket from Socket
2021-02-02 10:35:07 -08:00
8789a2c8a9
Merge pull request #4110 from microDev1/rtc-rp
...
RP2040: Support for RTC
2021-02-01 19:47:44 -08:00
ced3dc70ff
Merge pull request #4018 from iot49/cp-flow
...
add uart hardware flow control to nrf port
2021-02-01 19:38:16 -08:00
e79283932d
Moving control of USB compile-time options down to the BOARD level
2021-02-01 19:08:56 -06:00
e1618c21b2
Default WebUSB to OFF because other ports are not ready for it yet
2021-02-01 17:56:38 -06:00
ec03267035
rtc implementation for rp2040
2021-02-02 00:00:00 +05:30
459f323247
Merge pull request #4087 from DavePutz/cpu_temp_doc
...
Fixing microcontroller.cpu on multi-core cpus and adding microcontroller.cpus
2021-02-01 12:50:37 -05:00
745ba01768
shrink simmel
2021-02-01 12:22:35 -05:00
66639b237f
Merge remote-tracking branch 'upstream/main' into sslsocket
2021-02-01 11:43:01 -05:00
8277ffca86
Fix hash, close, error bugs
2021-02-01 11:04:12 -05:00
0c0b517112
Merge pull request #4105 from xorbit/main
...
Add board Silicognition LLC M4-Shim
2021-01-31 20:02:36 -08:00
529114c162
Merge pull request #4077 from netroy/lilygo-ttgo-t8-esp32-s2
...
Add support for Lilygo TTGO T8 ESP32-S2
2021-01-31 19:50:36 -08:00
17cf03c8e4
Merge pull request #4083 from microDev1/watchdog-rp
...
RP2040: Support for WatchDog
2021-01-31 19:45:38 -08:00
a52395a4bb
Merge pull request #4095 from hierophect/socket-timeout
...
Fix default socket timeout
2021-01-31 19:17:12 -08:00
6dba7a146d
Add support for Lilygo TTGO T8 ESP32-S2
2021-01-31 14:30:31 +01:00
0dbd3293a9
Add board Silicognition LLC M4-Shim
2021-01-30 18:35:35 -07:00
ddd516a683
Fix default timeout
2021-01-30 15:44:44 -05:00
34fe152fcf
extend include path
2021-01-30 14:00:14 +05:30
acbf66dacc
Make sys.platform "RP2040" on raspberrypi
...
[#4091 ]
2021-01-29 12:33:37 -08:00
067f42b4f8
Add Gameduino 3X Dazzler support on raspberry_pi_pico
...
Tested with hardware. Looks good.
Follow on from #4054
2021-01-29 12:25:59 -08:00
a724f6f954
Fix documentation builds
2021-01-29 11:58:02 -05:00
63f9b12fe6
Partially hard-coded VENDOR descriptor has been added. First build to be accessed via WebUSB. NOTE - had to disable HID (EndPoint shortage?)
2021-01-28 20:22:31 -06:00
67f128c0cf
Fixing microcontroller.cpu on muti-core cpus and adding microcontroller.cpus
2021-01-28 14:42:39 -06:00
a54b57ea40
watchdog implementation for rp2040
2021-01-28 15:15:15 +05:30
e285b5b98c
Merge remote-tracking branch 'adafruit/main' into cp-flow
2021-01-27 09:22:41 -08:00
16d54586c1
remove long read error message
2021-01-27 09:20:45 -08:00
351a0e747d
Merge pull request #4047 from kmatch98/esp32s2_ParallelBus
...
Add initial ParallelBus support for ESP32-S2
2021-01-26 13:07:58 -08:00
29e672fe86
Merge pull request #4071 from tannewt/rp2040_uart_error
...
Raise an error on UART use
2021-01-26 15:22:02 -05:00
815ab5277b
Fix stubs error, out of sockets error, invalid TLS leak
2021-01-26 14:13:12 -05:00
a9227e15d0
Merge pull request #4063 from dhalbert/rp2040-gp15
2021-01-26 13:38:41 -05:00
13812a788f
Merge pull request #4060 from dhalbert/regularize-extmod-modules
...
CIRCUITPY_* switches for JSON, RE, etc. Doc cleanup
2021-01-26 12:54:21 -05:00
b42e94ee2c
Raise an error on UART use
2021-01-26 08:48:30 -08:00
f154ee855d
shrink simmel
2021-01-26 10:23:37 -05:00
be4cfdd3d6
Use TOTAL_GPIO_COUNT instead of magic number 30
2021-01-25 22:16:24 -05:00
fbfb7b68cc
Most of the code we need has been pulled in from the tinyusb webusb_serial demo. Still LOTS to do regarding descriptors.
2021-01-25 20:37:58 -06:00
61850acd14
Fixed bug in pin error handling, deleted debug prints
2021-01-25 16:51:12 -06:00
a2ac2da7cc
Merge pull request #3936 from gamblor21/busdevice_fixes
...
Changing adafruit_bus_device to duck typing
2021-01-25 14:41:53 -08:00
c075e89258
Merge pull request #4054 from dglaude/patch-1
...
Permit Gameduino 3X Dazzler support on Metro M4 AirLift Lite.
2021-01-25 14:33:00 -08:00
4140012430
Allow pins >= 32, allow write pin on different register than data pins
2021-01-25 16:25:56 -06:00
9f34ec78c4
Separate Socket and SSLSocket, add LWIP connect
2021-01-25 17:07:25 -05:00
0fa5aa359d
Stop treating pin 15 specially.
2021-01-25 16:07:01 -05:00
c5992a3101
spresense: update Spresense SDK to 2.0.2
2021-01-25 18:40:14 +01:00
69c71bd522
fix some build errors
2021-01-25 11:54:10 -05:00
1e97d384ff
add GP15
2021-01-25 11:02:32 -05:00
69869e1439
CIRCUITPY_* switches for JSON, RE, etc. Doc cleanup
2021-01-24 23:10:20 -05:00
abd9f7894d
Permit Gameduino 3X Dazzler support on that board.
...
Totally untested, change request based on change made in #2581 .
It might be my first PR in CircuitPython core...
Maybe this should be confirmed by @jamesbowman
Those are the two boards that seems supported:
* Metro M4 Express
* Metro nRF52840 Express
The only Metro that this PR concern:
* Metro M4 AirLift Lite
Other Metro I found and are maybe not supported:
* Metro ESP32-S2
* Metro M0 Express
* Metro M7 1011
2021-01-24 12:53:06 +01:00
10965e5989
Delete unnecessary comments
2021-01-23 11:30:17 -06:00
dc421a6ca8
squeeze some builds
2021-01-23 06:18:15 -05:00
34aa01c5f9
Remove redundant clear_write, add make translate
2021-01-22 22:29:51 -06:00
de6b05a17b
Fix DigitalInOut.pull on RP2040
...
It used to always return None.
Fixes #4035
2021-01-22 19:00:37 -08:00
811a34fc3d
Add initial ParallelBus support for ESP32-S2
2021-01-22 14:42:09 -06:00
8c49c8df0a
shrink arduino_mkr1300
2021-01-22 11:26:33 -05:00
f50edc2904
Merge pull request #4044 from DavePutz/rp2040_longint
...
RP2040 longint support
2021-01-22 10:30:12 -05:00
f72c1474c5
Merge branch 'main' into connect
2021-01-22 03:56:57 -05:00
e3275be8b1
Merge pull request #3911 from hugodahl/add-translation-for-builtin-object-help
...
Update built-in help output for localization (Issue #3907 )
2021-01-22 03:49:19 -05:00
63b5e56c72
shrink feather_m0_adalogger and gemma_m0
2021-01-21 23:49:49 -05:00
e8e8c593ac
move longint choice to mpconfigport.mk
2021-01-21 22:50:15 -05:00
ea9fe24971
shrink arduino_mkrzero build
2021-01-21 18:02:35 -05:00
f39ca0a1d6
Adding longing support on RP2040
2021-01-21 16:42:16 -06:00
3aab17c98e
Adding longint support on RP2040
2021-01-21 16:40:57 -06:00
f88a896c03
Merge pull request #3854 from hierophect/esp-tcpserver
...
ESP32S2: Implement TCP Server bindings
2021-01-21 17:25:14 -05:00
9b8246f889
shrink sparkfun_samd21_dev de_DE build
2021-01-21 15:56:30 -05:00
1f6cd496c7
1. check enabled before scan; 2. make start-station() the single control point for esp_wifi_set_mode()
2021-01-21 13:54:19 -06:00
b73b30ff9f
Switch to upstream TinyUSB
2021-01-21 11:33:13 -08:00
b47fd08b20
copy editing
2021-01-21 10:17:40 -08:00
b0f7fd933f
type fix
2021-01-20 23:33:00 -08:00
6a6f22b0e6
pre-commit
2021-01-20 23:30:15 -08:00
48721584f9
Temporarily turn off string op overflow check
2021-01-20 19:16:56 -08:00
733094aead
Add initial RP2040 support
...
The RP2040 is new microcontroller from Raspberry Pi that features
two Cortex M0s and eight PIO state machines that are good for
crunching lots of data. It has 264k RAM and a built in UF2
bootloader too.
Datasheet: https://pico.raspberrypi.org/files/rp2040_datasheet.pdf
2021-01-20 19:16:56 -08:00
eff68b0d9f
Merge pull request #4011 from dheera/main
...
prevents going into safe mode for watchdog resets
2021-01-20 11:30:12 -08:00
f1e4960d14
Merge pull request #4019 from mrangen/QSPI-comment-fix
...
Fixed comment in mpconfigboard.h
2021-01-19 18:41:50 -08:00
409b5ff009
Merge pull request #4028 from djix123/stm32411ce_blackpill_haxpress
...
Add support for a 'haxpress' external SPI flash build for stm32f411ce Black Pill board
2021-01-19 13:01:56 -05:00
55c6d3e92f
1. Rename 'stm32f411ce_blackpill_haxpress' to 'stm32f411ce_blackpill_with_flash'
...
2. Add 'W25Q64JV_IQ' to flash chip list (as per commercial version)
2021-01-19 11:48:15 -05:00
b4bdf55eda
Update ports/stm/boards/stm32f411ce_blackpill_haxpress/mpconfigboard.mk
...
Update PID for _with_flash version to resolve duplicate PID issue
Co-authored-by: Dan Halbert <halbert@halwitz.org>
2021-01-19 11:35:52 -05:00
4804032f09
Update ports/stm/boards/stm32f411ce_blackpill_haxpress/mpconfigboard.mk
...
Change name from _haxpress to _with_flash
Co-authored-by: Dan Halbert <halbert@halwitz.org>
2021-01-19 11:35:03 -05:00
c8046af6e7
Update ports/stm/boards/stm32f411ce_blackpill_haxpress/mpconfigboard.h
...
Change name from _haxpress to _with_flash
Co-authored-by: Dan Halbert <halbert@halwitz.org>
2021-01-19 11:34:47 -05:00
ebb4df846f
Add support for a 'haxpress' external SPI flash build for the stm32f411ce blackpill board
2021-01-19 07:46:59 -05:00
a01ff658ea
fix case of connecting when wifi is stopped
2021-01-18 19:57:01 -06:00
e27dd26dc7
make translate, BEWARE adds the 'world'
2021-01-18 11:26:39 -08:00
ee48e4b452
ESP32-S2: Initialize touch in proper order
2021-01-18 11:52:03 -05:00
dea2bcd8f0
Fixed comment in mpconfigboard.h
2021-01-17 21:20:27 -07:00
07a9593abc
add flow control info to busio_uart_obj_t
2021-01-17 19:33:32 -08:00
c524900a1b
check connected before connecting
2021-01-17 20:21:31 -06:00
a9389343a8
Revert "UMFEATHERS2 - implement use of DotStar for status led"
2021-01-17 05:15:19 -05:00
41b9196167
Disabling in more small boards
2021-01-17 00:00:06 -06:00
d43eb7e84b
prevents going into safe mode for watchdog resets
2021-01-16 17:38:08 -08:00
49e059cdaf
Removing frozen libraries
2021-01-16 16:37:42 -06:00
816cbe4704
Merge pull request #3992 from anecdata/reason4
...
wifi: more disconnect reasons for retries & include error code in exception
2021-01-15 11:52:34 -08:00
4bc664fe5f
Merge remote-tracking branch 'upstream/main' into esp-tcpserver
2021-01-15 12:02:16 -05:00
c4f0325ff8
Merge pull request #3991 from TG-Techie/main
...
Revision to TG-Watch
2021-01-14 18:43:52 -05:00
8c0a9a2486
Merge pull request #4004 from jepler/fix-parallel-build-main
...
ports/unix: Fix parallel build problem
2021-01-14 18:00:46 -05:00
e6b49d95ee
Merge pull request #3993 from dhalbert/gattc-write-lengths
...
don't check length for remote characteristic or descriptor
2021-01-14 12:56:29 -08:00
059363f0e2
ports/unix: Fix parallel build problem
...
This is the same as I added to mpy-cross at e666e86035#3074
2021-01-14 14:13:31 -06:00
aedc8efeda
Add pin A1 as alias for AD1; A1 is preferred
2021-01-14 14:43:47 -05:00
287770f885
Merge remote-tracking branch 'upstream/main' into esp-tcpserver
2021-01-14 10:21:08 -05:00
f75bb5c50f
Rename to match WIFI_REASON. Also return specific reason code.
2021-01-13 23:46:35 -06:00
e519dd3c52
Retry on all disconnect reasons other than: 2 exception reasons & 1 manual disconnect reason.
2021-01-13 23:45:59 -06:00
c63d5a44a0
restore TG-Watch USB_PID from accidental overwrite
2021-01-14 00:08:34 -05:00
5f8ad0c5e6
correct USB_PRODUCT for TG-Watch
2021-01-14 00:02:56 -05:00
8f8af90098
final name and extra board
2021-01-13 23:51:34 -05:00
37a8c1c575
Complete non-blocking implementations, add socket close checking
2021-01-13 19:05:07 -05:00
ccace62ac9
don't check length for remote characteristic or dedescriptor
2021-01-13 15:35:51 -05:00
92a4398996
Merge pull request #3982 from jepler/esp32s2-make-flash
...
esp32s2: Fix 'make flash'
2021-01-13 11:08:15 -05:00
c44c99398d
Merge pull request #3983 from dhalbert/6.1.0-shrink-builds
...
shrink some de_DE builds
2021-01-12 20:19:43 -06:00
8d24e72981
Merge pull request #3978 from ladyada/neotrinkey
...
samd21 board with only 4 neopixels + two touchpads
2021-01-12 20:19:01 -06:00
4b30412871
shrink some de_DE builds
2021-01-12 18:23:37 -05:00
ed0cb248e9
esp32s2: Fix 'make flash'
...
As reported by @jerryneedell, this change was incorrect; the given
ESPTOOL_FLAGS caused `write_flash` to be repeated twice, which doesn't
work.
Closes #3981 .
2021-01-12 16:04:29 -06:00
4cdb298a20
WIP of non-blocking calls
2021-01-12 15:05:28 -05:00
f9c762256f
Merge pull request #3733 from jepler/audioout-esp32
...
esp32s2: Add I2SAudioOut
2021-01-12 13:25:40 -05:00
4be5e914ac
Merge pull request #3966 from dhalbert/samd-dac-channels
...
fix atmel-samd DAC channel selection logic
2021-01-12 13:01:50 -05:00
748d44892d
fix some precommit complaints
2021-01-12 12:55:02 -05:00
f7f97ae1b7
samd21 board with only 4 neopixels + two touchpads
2021-01-12 12:50:08 -05:00
bfdaa6eb9c
Merge pull request #3959 from ladyada/main
...
try adding new feather def
2021-01-12 08:26:29 -08:00
1ca29ec47c
Merge remote-tracking branch 'origin/main' into audioout-esp32
2021-01-12 09:23:07 -06:00
cd16f29efd
Merge branch 'main' into TouchAlarm
2021-01-12 18:28:38 +05:30
4db55652a3
Merge pull request #3964 from dhalbert/ble-timing-fixes
...
Round BLE timing values; fix timeout check
2021-01-11 16:52:14 -08:00
452d66dd0e
Update ports/atmel-samd/common-hal/analogio/AnalogOut.c
...
whoops, yes!
Co-authored-by: Scott Shawcroft <scott@tannewt.org>
2021-01-11 19:12:52 -05:00
081249f796
Merge pull request #3944 from BennyE/wifi-authmode
...
esp32-s2: Adding authmode keyword
2021-01-11 16:05:28 -08:00
3cf4d9c57f
Merge pull request #3954 from anecdata/mpconfigport
...
ESP32-S2: added sys.platform
2021-01-11 16:03:17 -08:00
10093d37c5
Merge pull request #3960 from dhalbert/pwmout-tcc-resolution
...
Look up TCC resolution as necessary
2021-01-11 15:33:59 -08:00
3a7755b311
Merge pull request #3930 from jerryneedell/jerryn_feathers2_led
...
UMFEATHERS2 - implement use of DotStar for status led
2021-01-11 15:29:09 -08:00
91245297e8
Merge pull request #3659 from iot49/msgpack
...
module msgpack
2021-01-11 15:22:39 -08:00
b0eb91dfef
Merge pull request #3955 from caiokat/fix_recvfrom_into
...
Fix socket.recvfrom_into()
2021-01-11 15:20:56 -08:00
5f448139e0
fixes and enhancement for touch alarm
...
- prevent touch alarm initialization if not set
- fix wake_alarm is set to touch alarm on autoreload
- add ability to have multiple touch alarms in light sleep
2021-01-11 15:30:45 +05:30
316bd0c72d
fix atmel-samd DAC channel selection logic
2021-01-10 19:22:15 -05:00
a397af9bdf
Round BLE timing values; fix timeout check
2021-01-10 13:16:19 -05:00
c87e1a6527
ok lets try without auto-display
2021-01-10 11:58:39 -05:00
53e4d78a3c
Update ports/esp32s2/common-hal/wifi/Network.c
...
Avoid to use yet another variable.
Co-authored-by: Scott Shawcroft <scott@tannewt.org>
2021-01-10 17:18:43 +01:00
8652d69614
update TG-Watch pins, name, and frozen libraries
2021-01-10 04:04:50 -05:00
d036620c70
compilier
2021-01-09 23:19:04 -05:00
5b9ce9e7cf
fix dup usb
2021-01-09 22:42:43 -05:00
b5b0d45b73
add tft
2021-01-09 22:36:54 -05:00
68a5e6dcba
copypaste typo
2021-01-09 15:52:58 -05:00
908e02439d
Look up TCC resolution as necessary
2021-01-09 15:04:23 -05:00
e20c65d8f0
background tasks: Add, use port_wake_main_task
...
Some ports need an extra operation to ensure that the main task is
awoken so that a queued background task will execute during an ongoing
light sleep.
This removes the need to enable supervisor ticks while I2SOut is operating.
Closes : #3952
2021-01-09 14:02:47 -06:00
4735cf4747
esp32s2: audiobusio: move i2s_common inside
...
Originally, I believed the implementation might be shared with AudioOut,
as on the ESP32 (non-S2) the I2S peripheral was also used to drive the DAC.
However, this is not the case on ESP32-S2 and appears it will not be
the case with the ESP32-S3 or -C3, to the extent that there's skeletal
support for either of them in esp-idf master branch.
However, it could still be shared by I2SIn or PDMIn (the latter being
hypothetically implemented as I2SIn + digital postprocessing like we did
in the atmel-sam port, to my understanding), so I moved it to
the common-hal folder.
2021-01-09 14:02:47 -06:00
10861b4038
esp32s2: Rename ESP_CALL_RAISE to CHECK_ESP_RESULT
...
Suggested by @tannewt, thanks!
2021-01-09 13:41:44 -06:00
a600fd3478
forgot deinit
2021-01-09 14:01:58 -05:00
301facf102
newline
2021-01-09 13:36:21 -05:00
7de1da45da
woops out of sync header, plus... i dunno add some frozen modules cause we have almost no RAM :(
2021-01-09 13:23:17 -05:00
813fa671f3
nowhitespace
2021-01-09 12:29:08 -05:00
9253351fa4
Merge branch 'main' into main
2021-01-09 12:25:16 -05:00
999ee68e12
try adding new feather def
2021-01-09 12:22:53 -05:00
13efbf24e5
disable msgpack on boards without room
2021-01-09 10:33:56 -06:00
7b4558b750
Fix socket.recvfrom_into()
2021-01-08 19:17:17 -05:00
06ab848a0d
added platform
2021-01-08 16:48:25 -06:00
de5b138dcf
remove commented line
2021-01-08 14:46:37 -05:00
7556f38f04
initialize LDO2 in board_init()
2021-01-08 14:40:06 -05:00
39c166ba6a
update tinyusb; _ticks_enabled only for SAMD21
2021-01-08 13:30:11 -05:00
5f0e41ad60
I2SOut: Enable ticks during audio playback
...
.. otherwise, the background callback to load the I2S fifos does not get
run. (I'm not sure this is _correct_ behavior of sleep + background
tasks, but it is the current behavior)
2021-01-08 09:01:34 -06:00
430bcdb59d
port_i2s_play: fill the initial buffer via background callback
...
There were _possibly_ problems where this routine was being entered
by direct call AND by background callback. Schedule the work here,
and it will be done almost immediately, without worry about interference.
I don't know if this is strictly necessary, but it doesn't hurt. Since
the I2S clock is being run all the time, we have to enter the background
task to fill the FIFO with zeros constantly anyway.
2021-01-08 08:49:25 -06:00
12264cca34
port_i2s_play: remove build error
2021-01-08 08:47:13 -06:00
0b7a4c4b2b
i2s_fill_buffer: remove debug print
2021-01-08 08:46:56 -06:00
873a300d02
i2s_fill_buffer: Need to fill with zeros when stopping
2021-01-08 08:46:41 -06:00
cfd8288dfa
esp2s2: enlarge stack-buffer, use it instead of i2s_zero_dma_buffer
...
.. it's not clear that there was a problem with i2s_zero_dma_buffer, but
just in case.
2021-01-07 16:29:52 -06:00
d3afda61d8
esp32s2: i2s: must reset buffer, otherwise wave samples don't start
...
.. and other housekeeping when starting to play a sample
2021-01-07 16:29:08 -06:00
352226402c
esp32s2: i2s: fix accounting for "stretched" frames
2021-01-07 16:28:33 -06:00
010a4e7b0f
esp32s2: port: Ensure JTAG pins are available for debugging
2021-01-07 16:23:21 -06:00
c7dc5f2507
support RTS/CTS hardware flow control
2021-01-07 14:13:19 -08:00
115f3e0867
Updated code as per helpful suggestion
2021-01-07 23:05:16 +01:00
7bb196b9d2
esp32s2: 'make flash': Allow customizing the esptool flags
...
This can be useful so that e.g., on a Kaluga when programming via
the FTDI chip, you can override the variable to specify "--after=hard_reset"
to automatically return to running CircuitPython, choose a different
baud rate (921600 is about 2s faster than 460800), etc:
make BOARD=espressif_kaluga_1 ESPTOOL_FLAGS="-b 921600 --before=default_reset --after=hard_reset"
2021-01-07 15:01:33 -06:00
30c6dd3f76
Merge remote-tracking branch 'origin/main' into audioout-esp32
2021-01-07 14:11:14 -06:00
6976ec6ef9
Merge remote-tracking branch 'upstream/main' into jerryn_feathers2_led
2021-01-07 15:02:40 -05:00
55c80754c7
Merge pull request #3945 from 2bndy5/fix-table-in-a-readme
...
convert esp32s2 port readme to rst
2021-01-07 10:43:34 -08:00
0b0b476be6
Merge pull request #3940 from caternuson/magtag_accelo_irq_pin
...
Add MagTag accelo IRQ pin
2021-01-07 10:31:33 -08:00
5358524941
Merge pull request #3939 from dhalbert/tick-overflow
...
overflowed tick counter needs 64 bits everywhere
2021-01-07 13:01:30 -05:00
18122e0455
missed a couple inline code snippets
2021-01-06 15:28:19 -08:00
092331eee1
convert esp32s2 readme to rst
2021-01-06 15:19:40 -08:00
66d87782be
Adding authmode keyword
2021-01-06 23:52:30 +01:00
9db0a4f265
add magtag accelo irq pin
2021-01-06 09:17:19 -08:00
a33359762d
Merge pull request #3903 from anecdata/reasons
...
ESP32-S2: Log all Wi-Fi events & remove unneeded call
2021-01-06 08:41:19 -08:00
9a1d864331
overflowed tick counter needs 64 bits everywhere
2021-01-06 11:09:06 -05:00
14e2a02c04
Merge remote-tracking branch 'upstream/main' into jerryn_feathers2_led
2021-01-06 05:47:37 -05:00
98c9492a8c
change ESP_EARLY_LOG* to ESP_LOG* throughout event_handler
2021-01-05 18:39:51 -06:00
1a82555803
Merge branch 'main' into msgpack
2021-01-05 11:19:11 -08:00
bbd4de33d1
Add adafruit_bus_device to CPX builds.
2021-01-04 15:53:39 -05:00
ec02102409
implment use of DotStar for staus led
2021-01-04 07:41:25 -05:00
dcf88e1e91
Merge pull request #3923 from bwshockley/Add_dotstar_mini_sam_m4
...
Add dotstar mini sam m4
2021-01-03 19:40:43 -05:00
10f178d162
Fixed incorrect pin assignment on header
...
IO13 is for blue LED
IO14 is the correct pin header between IO18 and IO12
The silk is wrong (shows IO13), but hardware is correct as IO14, but IO14 was not included in pins.c
Silk will be updated on next PCB production run
2021-01-04 10:06:32 +11:00
9286f26831
Added CP Dotstart Lib to Build
...
Added the CircuitPython dotstar library to the Mini SAM M4 build so users do not have to include the library to utilize the built-in APA102 LED.
2021-01-03 10:42:58 -06:00
2ce07209df
changes based on UM's input
2021-01-01 17:23:11 -08:00
220501e159
dupe LED entries
2020-12-31 18:02:44 -08:00
43f93b097f
release and pre-release FeatherS2 NSync
2020-12-31 17:50:41 -08:00
5698b8bb0a
Merge pull request #3850 from microDev1/touch-s2
...
Support for Touch Alarm
2020-12-30 16:25:11 -06:00
0bad6110d4
update wake-alarm implementation
2020-12-31 02:44:20 +05:30
b83bdc540d
enable light-sleep functionality
2020-12-31 02:22:20 +05:30
fb216148ec
Merge pull request #3900 from jepler/restore-frozen-busdevice
...
Restore frozen adafruit_bus_device module
2020-12-30 13:22:46 -05:00
28ce5e8988
Merge branch 'main' into touch-s2
2020-12-30 22:44:22 +05:30
83c6774a44
Revert "Removing frozen libs"
...
This reverts commit 23ed3ef971
2020-12-30 10:55:28 -06:00
c7f68022ef
add pretend-to-sleep functionality
2020-12-30 22:11:22 +05:30
d537d94a4c
see what we're missing
2020-12-30 09:45:15 -06:00
0914b71653
remove unneeded set_config (wrong param; called in connect anyway)
2020-12-30 09:26:25 -06:00
72cad49c69
Fix minor typo in ESP32S2 readme
2020-12-29 22:52:59 -06:00
a7542598a0
esp32s2: add I2SOut
2020-12-29 14:46:38 -06:00
b40a579d18
esp32s2: espidf: Consistent error checking of esp-idf calls
...
By surrounding most ESP-IDF API calls with this new macro, their failure will
result in a CircuitPython exception.
2020-12-29 14:06:32 -06:00
05ba1431c3
esp32s2: espidf: Add IDFError
...
this is an exception class for "generic" IDF errors that don't have
their own exception type.
2020-12-29 14:06:32 -06:00
d024df6b06
esp32s2: Use better optimizer flags in debug builds
...
(note that the before and after files both lack trailing newlines; this is
how the esp-idf do)
OPTIMIZATION_DEFAULT is -Og, which enables optimizations that do not
interfere with the debugger:
```
elseif(CONFIG_COMPILER_OPTIMIZATION_DEFAULT)
list(APPEND compile_options "-Og")
```
2020-12-29 14:06:32 -06:00
7401aa8e85
Merge pull request #3888 from microDev1/fix-reset-pin
...
FIX : common_hal_reset_pin()
2020-12-29 10:08:47 -06:00
f9d9c031a9
Merge pull request #3878 from xobs/fomu-fixes-6.0.0
...
Fomu fixes for 6.0.0
2020-12-28 11:51:26 -08:00
c3396e4b49
Merge pull request #3868 from BennyE/wifi-enhancement-countrycode
...
esp32-s2: wifi enhancement to include countrycode
2020-12-28 11:49:41 -08:00
171efd55e0
Merge pull request #3830 from tannewt/pin_alarm
...
Add pin alarming
2020-12-28 12:59:27 -05:00
dc332baa87
update common_hal_reset_pin()
2020-12-28 20:04:00 +05:30
6c7e6abcfd
Downgrade OTA API for IDF 4.2
2020-12-27 20:30:49 -08:00
2729666d82
SAMD51: change of DAC power setting
...
Fixes wrong DAC output levels at high data rate
closes adafruit#3796
2020-12-25 17:53:43 +01:00
64bb055700
Updating comment to reflect feedback of espressif from IDFGH-4486 -> works correct as per the protocol
2020-12-24 15:40:53 +01:00
2f95cc95a4
litex: move more critical code to RAM
...
The XIP SPI flash on Fomu is slow, which results in certain operations
taking a long time. This becomes a problem for time-critical operations
such as USB.
Move various calls into RAM to improve performance.
This includes the call to __modsi3 and __udivsi3 which are used by the
supervisor handler to determine if periodic callbacks need to be run.
This finishes fixing #3841
Signed-off-by: Sean Cross <sean@xobs.io>
2020-12-24 14:06:57 +08:00
f3e54414e5
litex: ensure we don't re-enable interrups during ISR
...
During an interrupt handler, interrupts are implicitly disabled. They
will be re-enabled when the interrupt handler returns.
Due to some changes that were made, varous calls will re-enable
interrupts after they're finished. Examples of this include calling
`CALLBACK_CRITICAL_END` and getting the number of ticks with
`port_get_raw_ticks()`.
This patch prevents this from happening by doing two things:
1. Use standard calls in `port_get_raw_ticks()` to disable and re-enable
interrupts, preventing nesting issues, and
2. Increase the nesting count inside `isr()`, reflecting the implicit
call that is made by hardware when an interrupt is handled
This helps to address #3841 .
Signed-off-by: Sean Cross <sean@xobs.io>
2020-12-24 14:03:10 +08:00
8061a2574d
Merge branch 'main' into pin_alarm
2020-12-23 22:05:02 -05:00
1a6b1b1953
implementing suggested changes
2020-12-24 00:37:37 +01:00
a11ad25727
BLE fixes
2020-12-23 16:39:27 -05:00
1a8033470a
Stub out mp_hal_is_interrupted for UNIX
2020-12-23 12:22:50 -08:00
eb65765d52
Merge pull request #3867 from dhalbert/frequencyin-fix-6.0.x
...
FrequencyIn: do not raise in interrupt handler
2020-12-23 12:14:16 -08:00
e9c9fce15d
Remove debug log messages
2020-12-23 14:59:09 +01:00
1fca297a2d
A couple sleep fixes
...
* Better messaging when code is stopped by an auto-reload.
* Auto-reload works during sleeps on ESP32-S2. Ticks wake up the
main task each time.
* Made internal naming consistent. CamelCase Python names are NOT
separated by an underscore.
2020-12-22 16:13:02 -08:00
89079039ad
FrequencyIn: do not raise in interrupt handler
2020-12-22 18:54:42 -05:00
8b03951fee
Merge pull request #3866 from jepler/use-stub
...
esp32s2: make flash: use the stub
2020-12-22 10:16:54 -08:00
da8f023665
esp32s2: make flash: use the stub
...
Very long ago, this was apparently not supported in esptool yet, at
least when operating over USB CDC. This now works just fine, and
our esp webtool relies on it as well. It makes flashing faster,
too.
2020-12-22 10:27:42 -06:00
d4e9eea397
mark alarm.wake_alarm during gc sweep
2020-12-22 08:11:01 -08:00
aaa3c61819
Add default I2C pins for STM32F411CE
2020-12-22 09:11:05 -05:00
d6df43b943
Merge pull request #3863 from dhalbert/adafruit-prefix
...
Add Adafruit to MICROPY_HW_BOARD_NAME for various boards
2020-12-22 08:02:35 -05:00
39ca406a31
Add Adafruit to MICROPY_HW_BOARD_NAME for various boards
2020-12-21 23:32:11 -05:00
6347a3fcdb
Merge pull request #3812 from microDev1/ota-s2
...
Support for OTA update
2020-12-21 18:46:13 -08:00
fb0c74c5f1
Merge pull request #3662 from ElectronicCats/bastble
...
Add new board BastBLE
2020-12-21 17:39:08 -08:00
ae3b440835
more fixes and still with debug
2020-12-22 00:32:48 +01:00
75620884e6
Fix stubs, recv_into error
2020-12-21 13:26:43 -05:00
32736dd2c3
Implement server API
2020-12-20 17:12:03 -05:00
d24a5d6270
update path board.h
2020-12-20 15:52:19 -06:00
2e393ed195
adding debug infos
2020-12-20 22:03:38 +01:00
bd3c5c33fb
define QSPI pinout
2020-12-20 14:57:10 -06:00
88b1e2fe61
remove Internal flash unnecessary
2020-12-20 13:35:15 -06:00
ecd7c0878e
expose wake pin parameter and more tweaks
2020-12-19 20:54:36 +05:30
a60fabdffa
add touch alarm support for esp32s2
2020-12-19 12:56:34 +05:30
f202eb734a
Merge pull request #3842 from StackRduino/main
...
add stackrduino_m0_pro
2020-12-18 12:33:34 -05:00
8eaf2b0c19
implement touch alarm
2020-12-18 12:54:36 +05:30
4512290ba0
Merge branch 'main' into ota-s2
2020-12-18 00:44:00 +05:30
4863413bc9
rename ota to dualbank
2020-12-18 00:34:56 +05:30
8f9cd7075e
Merge pull request #3752 from jepler/gcc10
...
build: Update to gcc10
2020-12-17 11:03:40 -05:00
7afa1a1d76
Update mpconfigboard.mk
...
reduced to CFLAGS_INLINE_LIMIT = 35 for tranaslations
2020-12-17 22:47:01 +08:00
06022a5e91
Update mpconfigboard.mk
...
changed CFLAGS_INLINE_LIMIT = 55
2020-12-17 21:58:24 +08:00
81ff95a8eb
Add files via upload
2020-12-17 20:29:54 +08:00
bc95c7f219
Delete board.c
2020-12-17 17:08:52 +08:00
f3fb014166
Delete mpconfigboard.h
2020-12-17 17:08:50 +08:00
1284418fa7
Delete mpconfigboard.mk
2020-12-17 17:08:48 +08:00
736c0d4c3d
Delete pins.c
2020-12-17 17:08:46 +08:00
0a7c74230c
Update mpconfigboard.mk
...
updated for 6.1
2020-12-17 16:26:54 +08:00
109e147b46
Update board.c
...
updated path to board.h
2020-12-17 16:22:47 +08:00
23ad9c7402
Update mpconfigboard.h
...
removed whitespace
2020-12-17 15:17:04 +08:00
3d9e4958c5
Add files via upload
2020-12-17 14:24:24 +08:00
f3b7cd6a5d
Delete pins.c
2020-12-17 14:24:07 +08:00
70739ff639
Update pins.c
2020-12-17 13:11:53 +08:00
fac0bf1db8
Add files via upload
2020-12-17 12:37:32 +08:00
0dcc659d53
Swap to IDF release/4.2 branch for stability
2020-12-15 18:12:59 -08:00
1ad49d9a18
Add alarm.pin that wakes on pin level
...
Fixes #3787
2020-12-15 18:12:59 -08:00
3ad4b12ce1
Merge branch 'main' into esp-analog-hang
2020-12-15 15:08:30 -05:00
4521dfb732
squeeze some smaller boards
2020-12-15 13:23:49 -05:00
fb33c4e1c0
-ftree-vrp better diagnostics on -Os builds; -fno-inline-functions for -O2; fix struct init in HCI bleio
2020-12-15 12:23:56 -05:00
bbbd621b18
nrf: simmel: remove some unneeded modules to make it fit
2020-12-15 10:54:37 -06:00
97947b4fe9
shrink bast_pro_mini_m0; use proper flex-array syntax
2020-12-14 22:07:54 -05:00
d076296659
Merge pull request #3816 from dhalbert/sleepmemory
...
alarm.sleep_memory + alarm.wake_alarm
2020-12-14 17:40:02 -08:00
d6ee17c6fd
Merge pull request #3817 from BennyE/reserve-pins-only-for-debug
...
esp32s2: Reserve UART pins only if DEBUG=1 is set to address issue 3811
2020-12-14 17:32:17 -08:00
a1f773d9ed
Merge pull request #3819 from BennyE/issue3663
...
Fix for issue 3663 by returning early if no scan was started before s…
2020-12-14 17:11:18 -08:00
dc473b29e3
Merge pull request #3643 from hierophect/esp32-pin-reset
...
ESP32-S2: Add IDF pin resets to Microcontroller
2020-12-14 17:09:29 -08:00
6abe3cd0ef
-Os for SAMD51; fix CSUPEROPT typo
2020-12-14 18:57:31 -05:00
d793ec2872
Change pinfunc to default of 0 at reset
2020-12-14 14:25:38 -05:00
cac755ba16
Merge remote-tracking branch 'upstream/main' into esp-analog-hang
2020-12-14 13:00:57 -05:00
f15e2d86c0
Reduce samples from 64 to 2
2020-12-14 12:59:20 -05:00
e0afa32cfa
use RTC_DATA_ATTR; address review comments
2020-12-14 11:36:54 -05:00
210c0ec89c
add country(code) to wifi network objects)
2020-12-13 13:32:12 +01:00
fe32dd08b8
Update Big Honking Button configuration to support its newest board revision.
...
v5 of the BHB board has:
* GD25Q64C instead of the GD25Q16C.
* Pin PB10 tied to ground for board revision detection.
2020-12-12 19:16:35 -05:00
37ee5e683d
Merge branch 'main' into ota-s2
2020-12-12 05:25:46 +05:30
c5c13620f2
Fix for issue 3663 by returning early if no scan was started before stop is issued
2020-12-12 00:49:53 +01:00
81c4871fdf
Set DEBUG CFLAG if set in make
2020-12-11 22:11:39 +01:00
e3194ad54e
Reserve UART pins only if DEBUG=1 is set to address issue 3811
2020-12-11 20:35:28 +01:00
344d3c59cb
Merge branch 'main' into msgpack
2020-12-11 11:10:30 -08:00
cf938983e9
SleepMemory + set alarm.wake_alarm
2020-12-11 08:10:26 -05:00
cb35abfd04
add docs, update translation & fix ota.flash()
2020-12-11 01:01:01 +05:30
55f4110983
fix typo
2020-12-10 14:16:25 -05:00
5964163649
Initial SleepMemory code
2020-12-10 13:03:40 -05:00
6a4f74946f
reset ota module on every vm run
2020-12-10 16:48:58 +05:30
07015ad527
add ability to switch boot partition
2020-12-10 16:42:45 +05:30
bfa2c604ef
add ability to flash in discontinuous chunks
2020-12-10 15:45:25 +05:30
ed5add37f6
add ability to flash in continuous chunks
2020-12-10 14:36:49 +05:30
dee86a014b
factor out esp_ota_end
2020-12-10 14:04:24 +05:30
20c3184c87
re-organize and clean-up
2020-12-10 12:34:56 +05:30
e14b148e62
Merge pull request #3803 from skieast/fix_i2c_hang_with_wifi
...
Working, tested with two i2c busses
2020-12-09 10:03:31 -08:00
133013083a
Merge pull request #3808 from tannewt/panic_safe_mode
...
Enter safe mode after panic or brownout
2020-12-08 16:31:22 -08:00
57101d7da6
Merge pull request #3807 from tannewt/sleep_tweaks
...
Add `board_deinit` for use with sleep
2020-12-08 16:30:41 -08:00
9a5006e241
Remove problematic calloc
2020-12-08 17:43:39 -05:00
0b4bcd9599
Fix build and more comments
2020-12-08 13:05:21 -08:00
d0a806d797
Enter safe mode after panic or brownout
...
Uses the IDF's reset reason. Does nothing before reset.
Fixes #3389
2020-12-08 11:03:24 -08:00
40118bcf57
Add `board_deinit` for use with sleep
...
This changes lots of files to unify `board.h` across ports. It adds
`board_deinit` when CIRCUITPY_ALARM is set. `main.c` uses it to
deinit the board before deep sleeping (even when pretending.)
Deep sleep is now a two step process for the port. First, the
port should prepare to deep sleep based on the given alarms. It
should set alarms for both deep and pretend sleep. In particular,
the pretend versions should be set immediately so that we don't
miss an alarm as we shutdown. These alarms should also wake from
`port_idle_until_interrupt` which is used when pretending to deep
sleep.
Second, when real deep sleeping, `alarm_enter_deep_sleep` is called.
The port should set any alarms it didn't during prepare based on
data it saved internally during prepare.
ESP32-S2 sleep is a bit reorganized to locate more logic with
TimeAlarm. This will help it scale to more alarm types.
Fixes #3786
2020-12-08 10:52:25 -08:00
2f95c94ad8
esp32s2 - update common_hal_mcu_reset
2020-12-08 18:00:58 +05:30
602243748b
add ota support for esp32s2
2020-12-08 11:45:00 +05:30
fc23a0cc8a
implement ota module
2020-12-08 11:30:00 +05:30
571c063c2a
Working, tested with two i2c busses
2020-12-07 17:57:54 -08:00
44b56f76c4
Store safe mode state in the RTC.
...
Also print backtrace before reset when DEBUG. This will help debug
safe mode issues which calls reset.
2020-12-07 16:39:54 -08:00
22ad76bb48
Merge pull request #3800 from BennyE/wifi-better-logs
...
Enhance debug log for wifi scan, sta_start, sta_stop
2020-12-07 12:32:15 -08:00
c1a2ea27ce
Change to config-based resets
2020-12-07 13:57:47 -05:00
c7b5928833
Fix submodule desync
2020-12-07 11:47:39 -05:00
40a536904f
Merge remote-tracking branch 'upstream/main' into esp32-pin-reset
2020-12-07 11:45:27 -05:00
169b487509
Include wifi.radio singleton in gc
2020-12-07 11:07:56 -05:00
70827ac3da
debug log for wifi scan, start stop
2020-12-06 23:38:04 +01:00
1130b80e2a
Merge pull request #3612 from gamblor21/bus_device
...
Moving Adafruit_CircuitPython_BusDevice to core
2020-12-02 13:23:02 -08:00
348392f8cc
Merge pull request #3775 from tannewt/nina_certs
...
Use nina-fw root certs
2020-12-02 16:13:19 -05:00
9b3186b625
Merge pull request #3776 from tannewt/backup_socket_timeout
...
Two minor socket changes
2020-12-02 16:12:29 -05:00
608c98501b
Merge remote-tracking branch 'adafruit/main' into msgpack
2020-12-02 13:10:39 -08:00
31acfedf93
Merge pull request #3780 from tannewt/block_while_erasing
...
Block all tasks (not interrupts) during flash erase
2020-12-02 16:10:25 -05:00
34bbcc4910
exclude nrf/simmel due to lack of flash
2020-12-02 13:05:00 -08:00
d7ba641ff6
Merge pull request #3767 from dhalbert/sleep
...
Initial alarm and sleep PR: time alarms with light and deep sleep; PinAlarms not yet implemented
2020-12-02 12:51:43 -08:00
cb863e4c5c
Added to partial builds where frozen removed
2020-12-01 22:19:48 -06:00
546b15bf1a
add trailing newline
2020-12-01 18:42:07 -08:00
Scott Shawcroft
Dan Halbert
gamblor21
Dan Halbert
Lucian Copeland
Jeff Epler
Philip Jander
Neradoc
Jason Nichols
Scott Shawcroft
Mark Omo
Patrick Van Oosterwijck
Enrique Casado
m4tk
Kevin Banks
BiffoBear
microDev
Aditya
James Bowman
root
Bernhard Boser
Kevin Matocha
Kamil Tomaszewski
David Glaude
anecdata
Jonathan Giles
djix123
mrangen
jerryneedell
dheera
Jonah Yolles-Murphy
Jeff Epler
lady ada
BennyE
foamyguy
Caio Henrique de Queiroz Katayama
brendan
caternuson
iot49
Kattni Rembor
Seon Rozenblum
Benjamin Shockley
askpatricw
Hugo Dahl
Uwe Gartmann
Sean Cross
sabas1080
Hany Elkomy
Thea Flowers
Bruce Segal
Bernhard Boser