Commit Graph

7 Commits

Author SHA1 Message Date
robert-hh 47fa723586 samd/modmachine: Make some machine classes configurable by #defines.
These include ADC, DAC, I2C, SoftI2C, SPI, SoftI2C, PWM, UART, pulse.  This
is useful for devices like the Adafruit Trinket series which have almost no
accessible GPIO pins.

Signed-off-by: robert-hh <robert@hammelrath.com>
2023-05-22 18:39:07 +10:00
robert-hh 250757716a samd/machine_pwm: Add init() method to PWM and simplify the PWM code.
The PWM.init() method has been added.  Calling init() without arguments
restarts a PWM channel stopped with deinit().  Otherwise single parameters
except for "device=n" can be changed again.  The device can only be
specified once, either in the constructor or the first init() call.

Also simplify get_pwm_config() and get_adc_config(), and shrink the PWM
object.
2023-05-04 13:10:38 +10:00
robert-hh 474233c250 samd/machine_pwm: Serialize fast update of PWM settings.
Any update of freq or duty_cycle requires the previous PWM cycle to be
finished.  Otherwise the new settings are not accepted.

Other changes in this commit:
- Report the set duty cycles even when the PWM is not yet started.
- pwm.freq(0) stops the pwm device, instead of raising an expception.
- Clear the duty cycle value cache on soft reset.
2022-10-25 23:42:14 +11:00
robert-hh 4d38ab652e samd: Make ADC, DAC, PWM, SPI objects consistent in how they print out.
All of ADC, DAC, Pin, PWM and SPI looked different before this change.
2022-10-25 23:36:01 +11:00
robert-hh e5cf3fab95 samd/machine_pin: Change the pin handling and naming/numbering.
Pin numbers are now the MCU port numbers in the range:

    PA0..PA31:  0..31
    PB0..PB31: 32..63
    PC0..PC31: 64..95
    PD0..PD31: 96..127

Pins can be denoted by the GPIO port number, the name as defined in
pins.csv or a string in the form Pxnn, like "PA16" or "PD03".

The pins.c and pins.h files are now obsolete.  The pin objects are part of
the AF table.

As result of a simplification, the code now supports using pin names or
numbers instead of pin objects for modules like UART, SPI, PWM, I2C, ADC,
pininfo.
2022-10-25 23:34:07 +11:00
robert-hh d9338aabc5 samd: Change the symbol names for the peripheral clocks.
From APB_FREQ to DFLL48M_FREQ, and from apb_freq to peripheral_freq.
2022-10-06 23:10:08 +11:00
robert-hh d693758ab2 samd/machine_pwm: Add the machine.PWM class.
Features are:
- 3 to 5 different frequency groups.
- Freq range of 1Hz - 24 MHz.
- Duty rate stays stable on freq change.

Keyword options to the PWM constructor:
- device=n Select a specific PWM device.  If no device is specified, a free
           device is chosen, if available at that pin.
- freq=nnnn
- duty_u16=nnnn
- duty_ns=nnnn
- invert=True/False Allowing two outputs on the same device/channel to have
                    complementary signals.

If both freq and duty are provided, PWM output will start immediately.

Pins at the same device have the same frequency.  If the PWM output number
exceeds the number of channels at the PWM device, the effctive channel_no
is output_no % channel_count.  So with a channel count of 4, output 7 is
assigned to channel 3.  Pins at a certain channel have the same frequency
and duty rate, but may be seperately inverted.
2022-10-06 22:42:55 +11:00