Commit Graph

159 Commits

Author SHA1 Message Date
Scott Gauche a8d8651873 Canonical C style for half_duplex = true/false 2022-02-08 23:13:22 -05:00
Scott Gauche 89ad767b8f add half_duplex to spi constructs in other ports but raise not implemented errors 2022-02-08 22:25:23 -05:00
Dan Halbert cc410ad6a3 common-hal I2C combined write_read 2022-01-31 22:03:30 -05:00
Jeff Epler 1d13c4ccd1
Centralize LONGINT_IMPL handling
This closes #5782
2021-12-27 10:21:47 -06:00
Scott Shawcroft 8cf269d2a0
Merge pull request #5634 from dhalbert/board_deinit
board_deinit() everywhere
2021-12-01 10:09:14 -08:00
Dan Halbert 57c33059f3 board_deinit() everywhere 2021-11-30 11:00:10 -05:00
Kamil Tomaszewski 9a8d8b1bf1 spresense: Fix time.time() 2021-11-30 12:38:48 +01:00
Timon a1052d5f73
Initial broadcom port for Raspberry Pi
This targets the 64-bit CPU Raspberry Pis. The BCM2711 on the Pi 4
and the BCM2837 on the Pi 3 and Zero 2W. There are 64-bit fixes
outside of the ports directory for it.

There are a couple other cleanups that were incidental:
* Use const mcu_pin_obj_t instead of omitting the const. The structs
  themselves are const because they are in ROM.
* Use PTR <-> OBJ conversions in more places. They were found when
  mp_obj_t was set to an integer type rather than pointer.
* Optimize submodule checkout because the Pi submodules are heavy
  and unnecessary for the vast majority of builds.

Fixes #4314
2021-11-22 14:54:44 -08:00
Jeff Epler 8d8f83bc05 Merge tag 'v1.17' into merge-1.17
F-strings, new machine.I2S class, ESP32-C3 support and LEGO_HUB_NO6 board

This release of MicroPython adds support for f-strings (PEP-498), with a
few limitations compared to normal Python.  F-strings are essentially
syntactic sugar for "".format() and make formatting strings a lot more
convenient.  Other improvements to the core runtime include pretty printing
OSError when it has two arguments (an errno code and a string), scheduling
of KeyboardInterrupt on the main thread, and support for a single argument
to the optimised form of StopIteration.

In the machine module a new I2S class has been added, with support for
esp32 and stm32 ports.  This provides a consistent API for transmit and
receive of audio data in blocking, non-blocking and asyncio-based
operation.  Also, the json module has support for the "separators" argument
in the dump and dumps functions, and framebuf now includes a way to blit
between frame buffers of different formats using a palette.  A new,
portable machine.bitstream function is also added which can output a stream
of bits with configurable timing, and is used as the basis for driving
WS2812 LEDs in a common way across ports.

There has been some restructuring of the repository directory layout, with
all third-party code now in the lib/ directory.  And a new top-level
directory shared/ has been added with first-party code that was previously
in lib/ moved there.

The docs have seen further improvement with enhancements and additions to
the rp2 parts, as well as a new quick reference for the zephyr port.
The terms master/slave have been replaced with controller/peripheral,
mainly relating to I2C and SPI usage.  And u-module references have been
replaced with just the module name without the u-prefix to help clear up
the intended usage of modules in MicroPython.

For the esp8266 and esp32 ports, hidden networks are now included in WLAN
scan results.  On the esp32 the RMT class is enhanced with idle_level and
write_pulses modes.  There is initial support for ESP32-C3 chips with
GENERIC_C3 and GENERIC_C3_USB boards.

The javascript port has had its Makefile and garbage collector
implementation reworked so it compiles and runs with latest the Emscripten
using asyncify.

The mimxrt port sees the addition of hardware I2C and SPI support, as well
as some additional methods to the machine module.  There is also support
for Hyperflash chips.

The nrf port now has full VFS storage support, enables source-line on
traceback, and has .mpy features consistent with other ports.

For the rp2 port there is now more configurability for boards, and more
boards added.

The stm32 port has a new LEGO_HUB_NO6 board definition with detailed
information how to get this LEGO Hub running stock MicroPython.  There is
also now support to change the CPU frequency on STM32WB MCUs.  And USBD_xxx
descriptor options have been renamed to MICROPY_HW_USB_xxx.

Thanks to everyone who contributed to this release: Amir Gonnen, Andrew
Scheller, Bryan Tong Minh, Chris Wilson, Damien George, Daniel Mizyrycki,
David Lechner, David P, Fernando, finefoot, Frank Pilhofer, Glenn Ruben
Bakke, iabdalkader, Jeff Epler, Jim Mussared, Jonathan Hogg, Josh Klar,
Josh Lloyd, Julia Hathaway, Krzysztof Adamski, Matúš Olekšák, Michael
Weiss, Michel Bouwmans, Mike Causer, Mike Teachman, Ned Konz, NitiKaur,
oclyke, Patrick Van Oosterwijck, Peter Hinch, Peter Züger, Philipp
Ebensberger, robert-hh, Roberto Colistete Jr, Sashkoiv, Seon Rozenblum,
Tobias Thyrrestrup, Tom McDermott, Will Sowerbutts, Yonatan Goldschmidt.

What follows is a detailed list of changes, generated from the git commit
history, and organised into sections.

Main components
===============

all:
- fix signed shifts and NULL access errors from -fsanitize=undefined
- update to point to files in new shared/ directory

py core:
- mpstate: make exceptions thread-local
- mpstate: schedule KeyboardInterrupt on main thread
- mperrno: add MP_ECANCELED error code
- makeqstrdefs.py: don't include .h files explicitly in preprocessing
- mark unused arguments from bytecode decoding macros
- objexcept: pretty print OSError also when it has 2 arguments
- makeversionhdr: add --tags arg to git describe
- vm: simplify handling of MP_OBJ_STOP_ITERATION in yield-from opcode
- objexcept: make mp_obj_exception_get_value support subclassed excs
- support single argument to optimised MP_OBJ_STOP_ITERATION
- introduce and use mp_raise_type_arg helper
- modsys: optimise sys.exit for code size by using exception helpers
- objexcept: make mp_obj_new_exception_arg1 inline
- obj: fix formatting of comment for mp_obj_is_integer
- emitnative: reuse need_reg_all func in need_stack_settled
- emitnative: ensure stack settling is safe mid-branch
- runtime: fix bool unary op for subclasses of native types
- builtinimport: fix condition for including do_execute_raw_code()
- mkrules: automatically build mpy-cross if it doesn't exist
- implement partial PEP-498 (f-string) support
- lexer: clear fstring_args vstr on lexer free
- mkrules.mk: do submodule sync in "make submodules"

extmod:
- btstack: add missing call to mp_bluetooth_hci_uart_deinit
- btstack: check that BLE is active before performing operations
- uasyncio: get addr and bind server socket before creating task
- axtls-include: add axtls_os_port.h to customise axTLS
- update for move of crypto-algorithms, re1.5, uzlib to lib
- moduselect: conditionally compile select()
- nimble: fix leak in l2cap_send if send-while-stalled
- btstack/btstack.mk: use -Wno-implicit-fallthrough, not =0
- utime: always invoke mp_hal_delay_ms when >= to 0ms
- modbluetooth: clamp MTU values to 32->UINT16_MAX
- nimble: allow modbluetooth binding to hook "sent HCI packet"
- nimble: add "memory stalling" mechanism for l2cap_send
- uasyncio: in open_connection use address info in socket creation
- modujson: add support for dump/dumps separators keyword-argument
- modlwip: fix close and clean up of UDP and raw sockets
- modbluetooth: add send_update arg to gatts_write
- add machine.bitstream
- modframebuf: enable blit between different formats via a palette

lib:
- tinyusb: update to version 0.10.1
- pico-sdk: update to version 1.2.0
- utils/stdout_helpers: make mp_hal_stdout_tx_strn_cooked efficient
- axtls: switch to repo at micropython/axtls
- axtls: update to latest axtls 2.1.5 wih additional commits
- re1.5: move re1.5 code from extmod to lib
- uzlib: move uzlib code from extmod to lib
- crypto-algorithms: move crypto-algorithms code from extmod to lib
- update README's based on contents of these dirs

drivers:
- neopixel: add common machine.bitstream-based neopixel module
- neopixel: optimize fill() for speed
- neopixel: reduce code size of driver
- cyw43: fix cyw43_deinit so it can be called many times in a row
- cyw43: make wifi join fail if interface is not active

mpy-cross:
- disable stack check when building with Emscripten

Support components
==================

docs:
- library: document new esp32.RMT features and fix wait_done
- library: warn that ustruct doesn't handle spaces in format strings
- esp8266/tutorial: change flash mode from dio to dout
- replace master/slave with controller/peripheral in I2C and SPI
- rp2: enhance quickref and change image to Pico pinout
- rp2: update general section to give a brief technical overview
- library/utime.rst: clarify behaviour and precision of sleep ms/us
- library/uasyncio.rst: document stream readexactly() method
- library/machine.I2S.rst: fix use of sd pin in examples
- zephyr: add quick reference for the Zephyr port
- library/zephyr: add libraries specific to the Zephyr port
- templates: add unix and zephyr quickref links to top-index
- rename ufoo.rst to foo.rst
- replace ufoo with foo in all docs
- library/index.rst: clarify module naming and purpose
- library/builtins.rst: add module title
- library/network.rst: simplify socket import
- add docs for machine.bitstream and neopixel module
- library: fix usage of :term: for frozen module reference
- esp8266: use monospace for software tools
- reference: mention that slicing a memoryview causes allocation

examples: no changes specific to this component/port

tests:
- extmod: make uasyncio_heaplock test more deterministic
- cpydiff/modules_struct_whitespace_in_format: run black
- extmod/ujson: add tests for dump/dumps separators argument
- run-multitests.py: add broadcast and wait facility
- multi_bluetooth/ble_subscribe.py: add test for subscription
- extmod/vfs_fat_finaliser.py: ensure alloc at never-used GC blocks
- basics: split f-string debug printing to separate file with .exp
- pybnative: make while.py test run on boards without pyb.delay

tools:
- autobuild: add scripts to build release firmware
- remove obsolete build-stm-latest.sh script
- ci.sh: run apt-get update in ci_powerpc_setup
- makemanifest.py: allow passing flags to mpy-tool.py
- autobuild: add mimxrt port to build scripts for nightly builds
- pyboard.py: add cmd-line option to make soft reset configurable
- mpremote: swap order of PID and VID in connect-list output
- ci.sh: build unix dev variant as part of macOS CI
- ci.sh: build GENERIC_C3 board as part of esp32 CI
- autobuild: use separate IDF version to build newer esp32 SoCs
- autobuild: add FeatherS2 and TinyS2 to esp32 auto builds
- mpremote: add seek whence for mounted files
- mpremote: raise OSError on unsupported RemoteFile.seek
- autobuild: add the MIMXRT1050_EVKB board to the daily builds
- ci.sh: add mpy-cross build to nrf port
- codeformat.py: include ports/nrf/modules/nrf in code formatting
- gen-cpydiff.py: don't rename foo to ufoo in diff output
- autobuild: add auto build for Silicognition wESP32
- mpremote: fix connect-list in case VID/PID are None
- mpremote: add "devs" shortcut for "connect list"
- mpremote: remove support for pyb.USB_VCP in/out specialisation
- autobuild: don't use "-B" for make, it's already a fresh build
- pyboard.py: move --no-exclusive/--soft-reset out of mutex group
- pyboard.py: make --no-follow use same variable as --follow
- pyboard.py: add --exclusive to match --no-exclusive
- pyboard.py: make --no-soft-reset consistent with other args
- uncrustify: force 1 newline at end of file
- mpremote: bump version to 0.0.6

CI:
- workflows: add workflow to build and test javascript port
- workflows: switch from Coveralls to Codecov
- workflows: switch from lcov to gcov
- workflows: add workflow to build and test unix dev variant

The ports
=========

all ports:
- use common mp_hal_stdout_tx_strn_cooked instead of custom one
- update for move of crypto-algorithms, uzlib to lib
- rename USBD_VID/PID config macros to MICROPY_HW_USB_VID/PID

bare-arm port: no changes specific to this component/port

cc3200 port: no changes specific to this component/port

esp8266 port:
- add __len__ to NeoPixel driver to support iterating
- Makefile: add more libm files to build
- include hidden networks in WLAN.scan results
- replace esp.neopixel with machine.bitstream
- remove dead code for end_ticks in machine_bitstream

esp32 port:
- boards/sdkconfig.base: disable MEMPROT_FEATURE to alloc from IRAM
- add __len__ to NeoPixel driver to support iterating
- main: allow MICROPY_DIR to be overridden
- esp32_rmt: fix RMT looping in newer IDF versions
- esp32_rmt: enhance RMT with idle_level and write_pulses modes
- add new machine.I2S class for I2S protocol support
- machine_spi: calculate actual attained baudrate
- machine_hw_spi: use a 2 item SPI queue for long transfers
- machine_dac: add MICROPY_PY_MACHINE_DAC option, enable by default
- machine_i2s: add MICROPY_PY_MACHINE_I2S option, enable by default
- fix use of mp_int_t, size_t and uintptr_t
- add initial support for ESP32C3 SoCs
- boards/GENERIC_C3: add generic C3-based board
- modmachine: release the GIL in machine.idle()
- mphalport: always yield at least once in delay_ms
- machine_uart: add flow kw-arg to enable hardware flow control
- boards: add Silicognition wESP32 board configuration
- mpconfigport.h: enable reverse and inplace special methods
- include hidden networks in WLAN.scan results
- makeimg.py: get bootloader and partition offset from sdkconfig
- enable MICROPY_PY_FSTRINGS by default
- machine_hw_spi: release GIL during transfers
- machine_pin: make check for non-output pins respect chip variant
- replace esp.neopixel with machine.bitstream
- remove dead code for end_ticks in machine_bitstream
- boards: add GENERIC_C3_USB board with USB serial/JTAG support

javascript port:
- rework Makefile and GC so it works with latest Emscripten
- Makefile: suppress compiler errors from array bounds
- Makefile: change variable to EXPORTED_RUNTIME_METHODS

mimxrt port:
- move calc_weekday helper function to timeutils
- machine_spi: add the SPI class to the machine module
- moduos: seed the PRNG on boot using the TRNG
- boards: set vfs partition start to 1 MBbyte
- main: skip running main.py if boot.py failed
- main: extend the information returned by help()
- mimxrt_flash: remove commented-out code
- modmachine: add a few minor methods to the machine module
- machine_led: use mp_raise_msg_varg helper
- machine_i2c: add hardware-based machine.I2C to machine module
- add support for Hyperflash chips
- boards: add support for the MIMXRT1050_EVKB board
- machine_pin: implement ioctl for Pin

minimal port:
- Makefile: add support for building with user C modules

nrf port:
- modules: replace master/slave with controller/peripheral in SPI
- boards/common.ld: calculate unused flash region
- modules/nrf: add new nrf module with flash block device
- drivers: add support for using flash block device with SoftDevice
- mpconfigport.h: expose nrf module when MICROPY_PY_NRF is set
- README: update README.md to reflect internal file systems
- mpconfigport.h: tune FAT FS configuration
- Makefile: add _fs_size linker script override from make
- modules/uos: allow a board to configure MICROPY_VFS_FAT/LFS1/LFS2
- mpconfigport.h: enable MICROPY_PY_IO_FILEIO when an FS is enabled
- qstrdefsport.h: add entries for in-built FS mount points
- main: add auto mount and auto format hook for internal flash FS
- boards: enable needed features for FAT/LFS1/LFS2
- facilitate use of freeze manifest
- boards: set FROZEN_MANIFEST blank when SD present on nrf51 targets
- modules/scripts: add file system formatting script
- Makefile: set default manifest file for all targets
- mphalport: add dummy function for mp_hal_time_ns()
- boards: enable MICROPY_VFS_LFS2 for all target boards
- modules/uos: add ilistdir to uos module
- modules/nrf: add function to enable/disable DCDC
- enable source line on tracebacks
- set .mpy features consistent with documentation and other ports

pic16bit port: no changes specific to this component/port

powerpc port: no changes specific to this component/port

qemu-arm port: no changes specific to this component/port

rp2 port:
- use 0=Monday datetime convention in RTC
- machine_rtc: in RTC.datetime, compute weekday automatically
- CMakeLists.txt: suppress compiler errors for pico-sdk and tinyusb
- tusb_config.h: set CFG_TUD_CDC_EP_BUFSIZE to 256
- machine_uart: add hardware flow control support
- machine_uart: allow overriding default machine UART pins
- machine_i2c: allow boards to configure I2C pins using new macros
- machine_spi: allow boards to configure SPI pins using new macros
- machine_uart: fix poll ioctl to also check hardware FIFO
- machine_uart: fix read when FIFO has chars but ringbuf doesn't
- tusb_port: allow boards to configure USB VID and PID
- boards/ADAFRUIT_FEATHER_RP2040: configure custom VID/PID
- boards/ADAFRUIT_FEATHER_RP2040: configure I2C/SPI default pins
- boards/SPARKFUN_PROMICRO: configure UART/I2C/SPI default pins
- boards/SPARKFUN_THINGPLUS: configure I2C/SPI default pins
- boards: add Adafruit ItsyBitsy RP2040
- boards: add Adafruit QT Py RP2040
- boards: add Pimoroni Pico LiPo 4MB
- boards: add Pimoroni Pico LiPo 16MB
- boards: add Pimoroni Tiny 2040
- CMakeLists.txt: allow a board's cmake to set the manifest path
- enable MICROPY_PY_FSTRINGS by default
- Makefile: add "submodules" target, to match other ports
- rp2_flash: disable IRQs while calling flash_erase/program
- CMakeLists.txt: add option to enable double tap reset to bootrom
- mpconfigport.h: allow boards to add root pointers

samd port:
- add support for building with user C modules

stm32 port:
- softtimer: add soft_timer_reinsert() helper function
- mpbthciport: change from systick to soft-timer for BT scheduling
- provide a custom BTstack runloop that integrates with soft timer
- usb: make irq's default trigger enable all events
- boardctrl: skip running main.py if boot.py had an error
- sdio: fix undefined reference to DMA stream on H7
- dma: add DMAMUX configuration for H7 to fix dma_nohal_init
- main: call mp_deinit() at end of main
- adc: allow using ADC12 and ADC3 for H7
- adc: define the ADC instance used for internal channels
- adc: simplify and generalise how pin_adcX table is defined
- add new machine.I2S class for I2S protocol support
- boards/NUCLEO_F446RE: fix I2C1 pin assignment to match datasheet
- replace master/slave with controller/peripheral in I2C and SPI
- systick: always POLL_HOOK when delaying for milliseconds
- sdram: make SDRAM test cache aware, and optional failure with msg
- boards/NUCLEO_F446RE: enable CAN bus support
- boards: add support for SparkFun STM32 MicroMod Processor board
- uart: fix LPUART1 baudrate set/get
- uart: support low baudrates on LPUART1
- boards/STM32F429DISC: set correct UART2 pins and add UART3/6
- boards/NUCLEO_F439ZI: add board definition for NUCLEO_F439ZI
- boards/LEGO_HUB_NO6: add board definition for LEGO_HUB_NO6
- Makefile: update to only pull in used Bluetooth library
- README.md: update supported MCUs, and submodule and mboot use
- usbd_desc: rename USBD_xxx descriptor opts to MICROPY_HW_USB_xxx
- usbd_cdc_interface: rename USBD_CDC_xx opts to MICROPY_HW_USB_xx
- powerctrl: support changing frequency on WB MCUs
- boards/NUCLEO_H743ZI2: add modified version of NUCLEO_H743ZI
- mbedtls: fix compile warning about uninitialized val
- enable MICROPY_PY_FSTRINGS by default
- add implementation of machine.bitstream
- Makefile: allow GIT_SUBMODULES and LIBS to be extended
- stm32_it: support TIM17 IRQs on WB MCUs
- disable computed goto on constrained boards
- storage: make extended-block-device more configurable
- boards/LEGO_HUB_NO6: change SPI flash storage to use hardware SPI
- boards/LEGO_HUB_NO6: skip first 1MiB of SPI flash for storage
- boards/LEGO_HUB_NO6: add make commands to backup/restore firmware

teensy port: no changes specific to this component/port

unix port:
- modffi: add option to lock GC in callback, and cfun access
- Makefile: add back LIB_SRC_C to list of object files
- variants: enable help and help("modules") on standard and dev
- Makefile: disable error compression on arm-linux-gnueabi-gcc

windows port:
- Makefile: add .exe extension to executables name
- appveyor: update to VS 2017 and use Python 3.8 for build/test

zephyr port:
- machine_spi: add support for hardware SPI
2021-10-15 08:20:54 -05:00
Kamil Tomaszewski a0d960f2a1 spresense: update SDK to 2.3.0 2021-09-13 11:04:15 +02:00
Neradoc 8625e53817 change board dicts to include a common macro with __name__ 2021-09-03 21:03:55 +02:00
Neradoc 4d05bb26bf change board.ID to board.board_id 2021-08-26 23:11:55 +02:00
Neradoc fed6e8ea99 Spresense: add CIRCUITPY_BOARD_ID because it doesn't use BASE_CFLAGS 2021-08-26 23:11:55 +02:00
Neradoc b14b294516 add board.ID 2021-08-26 23:11:55 +02:00
Jeff Epler 2b64318a57 Update all implementations of common_hal_busio_spi_read to honor write_value
(nrf, rp2040, and cxd56)

.. as well as a misleading comment that said that read always output
zeros.

Closes: #3447
2021-08-18 10:20:40 -05:00
Scott Shawcroft de796e2304
Move OneWire to `onewireio` from `busio`
This will allow finer grained inclusion in 8.0.0

Fixes #5135
2021-08-12 10:47:14 -07:00
Dan Halbert e9369d50e1
Merge pull request #5067 from tannewt/pulseout_switch
Switch to pin, frequency and duty_cycle PulseOut
2021-07-28 14:58:06 -04:00
Kattni fc59a7ac02
Merge pull request #5068 from dhalbert/remove-gamepad
remove gamepad; deprecate gamepadshift
2021-07-27 11:35:06 -04:00
Kamil Tomaszewski ff65863719 spresense: update SDK to 2.2.0 2021-07-27 11:25:51 +02:00
Dan Halbert 901a6c27c0 remove gamepad; deprecate gamepadshift 2021-07-26 22:15:09 -04:00
Scott Shawcroft 412eb87080
Switch to pin, frequency and duty_cycle PulseOut
Passing in a PWMOut still works but is deprecated. It will be
removed in CircuitPython 8.0.0

This also switches STM32 timer indices and channel indices to
0-based in our pin data rather than `- 1` everywhere. The latter is
more bug prone.

Most of the way for #3264

Tested on Metro M0, Metro M4, Feather S2, Feather nRF52840, Feather
STM32F4 and Arduino RP2040.
2021-07-26 18:35:49 -07:00
Kamil Tomaszewski da248d1594 spresense: Fix USB CDC and MSC 2021-05-18 17:02:16 +02:00
Dan Halbert fa6c06fb38 count in/out endpoints; allow more usb modules on low-endpoint boards 2021-05-13 21:59:02 -04:00
Scott Shawcroft 42f4065c8a
Merge remote-tracking branch 'adafruit/main' into merge_1.13 2021-05-06 11:17:53 -07:00
Dan Halbert 579cdf30f1 fix more build errors 2021-05-05 16:49:29 -04:00
Scott Shawcroft f0bb26d70f
Merge MicroPython 1.13 into CircuitPython 2021-05-04 18:06:33 -07:00
Dan Halbert f06d54524d merge from adafruit 2021-04-28 23:48:26 -04:00
Dan Halbert f98a54628b wip: compiles 2021-04-27 14:37:36 -04:00
Scott Shawcroft 76033d5115
Merge MicroPython v1.11 into CircuitPython 2021-04-26 15:47:41 -07:00
Dan Halbert 64e0958916 wip: descriptor building 2021-04-21 23:25:36 -04:00
Jeff Epler bc690d4070
Merge pull request #4415 from jepler/pre-commit-no-run-if-empty
pre-commit: code formatter fixes
2021-03-16 09:54:12 -05:00
Scott Shawcroft 9cb8ce67ed
Merge pull request #4412 from kamtom480/spi_and_i2c
spresense: minor changes for i2c, spi and uart
2021-03-15 17:35:06 -07:00
Jeff Epler d3bf1fe15d modifications by pre-commit 2021-03-15 18:11:00 -05:00
Kamil Tomaszewski ed3f636be5 spresense: empty rx uart fifo after initialization 2021-03-15 16:14:16 +01:00
Kamil Tomaszewski 22ed0abf6c spresens: configure pin mode for i2c and spi 2021-03-15 16:14:16 +01:00
microDev a52eb88031
run code formatting script 2021-03-15 19:27:36 +05:30
Kamil Tomaszewski 18668f6e28 spresense: fix spi to work with only one data pin 2021-03-11 18:06:49 +01:00
Kamil Tomaszewski 76d0870fba spresense: return error as positive value for i2c 2021-03-11 18:04:01 +01:00
Kamil Tomaszewski 7c921b808b spresense: Define LONGINT_IMPL as MPZ 2021-03-02 14:25:22 +01:00
Kamil Tomaszewski f9d21637a3 spresense: return valid reference voltage 2021-03-02 14:25:22 +01:00
Scott Shawcroft d0eab5c561
Merge pull request #4256 from kmatch98/bt_cleanup
Add `bitmaptools` module
2021-03-01 18:24:12 -08:00
Kamil Tomaszewski d68fdf3a3d spresense: return the correct value for Analog In 2021-03-01 15:45:10 +01:00
Kevin Matocha a7a4f93ff8 Updated build configs to turn off BITMAPTOOLS for smaller builds 2021-02-25 15:44:32 -06:00
Kamil Tomaszewski e369473794 spresense: change RX and TX buffer size for CDC 2021-02-24 18:19:18 +01:00
Dan Halbert e344c6d684 fix some builds 2021-02-18 14:24:58 -05:00
Dan Halbert c26de0136a works! no timeouts 2021-02-16 17:39:36 -05:00
Dan Halbert f0564b4986 merge from upstream; complicated webusb merge 2021-02-11 18:50:02 -05:00
Kamil Tomaszewski c5992a3101 spresense: update Spresense SDK to 2.0.2 2021-01-25 18:40:14 +01:00
iot49 1a82555803
Merge branch 'main' into msgpack 2021-01-05 11:19:11 -08:00
Dan Halbert 8f9cd7075e
Merge pull request #3752 from jepler/gcc10
build: Update to gcc10
2020-12-17 11:03:40 -05:00