Scott Shawcroft
d7874e65c2
Merge pull request #7299 from BooleanMattock/main
...
Fix to Issue #7224 - Servo update slow due to PWM channel duty cycle update busy-wait
2022-12-05 12:54:41 -08:00
BooleanMattock
afb5301cef
Fix to Issue #7224 - tested
2022-12-02 20:21:40 -05:00
Scott Shawcroft
4c064c263e
Merge pull request #7294 from tannewt/analogbufio_rework
...
Rework the analogbufio API.
2022-12-02 14:53:16 -08:00
Scott Shawcroft
f7504ff857
Tweaks based on review comments
2022-12-02 10:19:31 -08:00
Scott Shawcroft
255e997345
Rework the analogbufio API.
...
* read() is now readinto() and takes the buffer to write into.
* readinto() returns the number of valid samples.
* readinto() can be interrupted by ctrl-c.
* readinto() API doesn't support signed numbers because it never did.
* sample_rate is now required in the constructor because supported
values will vary per-port.
* 16 bit values are full range. 12 bit samples from RP2040 are stretched
in the same way they are for AnalogIn.
Fixes #7226
2022-12-01 17:46:07 -08:00
Bill Sideris
3fb4fd81e9
Revert "debug_dhcp to follow general debug"
2022-11-30 22:44:18 +02:00
Bill Sideris
0738d50834
debug_dhcp to follow general debug
2022-11-30 22:24:21 +02:00
Bill Sideris
f8070d2141
Change comment, and logic on dhcpserver
2022-11-30 21:51:50 +02:00
Bill Sideris
44d5326d4c
fix picow-ap
2022-11-30 19:36:00 +02:00
Bill Sideris
362018dcca
Merge branch 'main' into picow-ap
2022-11-30 19:11:03 +02:00
Scott Shawcroft
c13ca95da1
Add MDNS support to Pico W
...
This adds both cpy-MAC.local and circuitpython.local support.
Fixes #7214
2022-11-28 16:15:28 -08:00
Scott Shawcroft
ad2d190507
Merge pull request #7247 from tannewt/picow_web_workflow
...
Enable* web workflow for Pico W
2022-11-28 14:19:42 -08:00
Scott Shawcroft
30563655d7
Merge pull request #7249 from dhalbert/wifi-connect-ap-api
...
correct Radio.connect() and .start_ap() signatures; clean up some code
2022-11-23 10:29:05 -08:00
Dan Halbert
17be447c4b
correct Radio.connect() and .start_ap() signatures; clean up some code
2022-11-22 17:11:03 -05:00
Dan Halbert
6d022733b3
Merge pull request #7162 from rhooper/boards-list
...
add boards list to make error message
2022-11-21 23:18:37 -05:00
Scott Shawcroft
c3a96a63c0
Enable* web workflow for Pico W
...
* Except for circuitpython.local which depends on MDNS and will be
done in a follow up PR.
Progress on #7214
2022-11-21 16:24:05 -08:00
Bill Sideris
b40facd0b4
Error msg changes
2022-11-22 01:00:34 +02:00
Dan Halbert
1611cf98da
have clock start high in SPI mode 3
2022-11-18 18:27:38 -05:00
Bill Sideris
88bd9ef6b8
just change the ap error
2022-11-18 22:51:05 +02:00
MicroDev
c3c1717813
refactor common port specific Makefile code
2022-11-18 23:00:28 +05:30
MicroDev
e2a3597263
add awesome new make error message
...
Copied from initial implementation on atmel-samd
Co-authored-by: Rose Hooper <rhooper@toybox.ca>
Co-authored-by: Jeff Epler <jepler@gmail.com>
2022-11-18 11:27:23 +05:30
Bill Sideris
b8cd6c093f
picow-ap progress
2022-11-17 21:47:39 +02:00
Bill Sideris
a234b74e87
Merge branch 'adafruit:main' into picow-ap
2022-11-16 21:32:46 +02:00
Scott Shawcroft
6689b9ad09
Merge pull request #7208 from domdfcoding/weact_pico_16mb
...
Add support for the 16MB WeAct Studio Pico
2022-11-16 09:59:37 -08:00
Jeff Epler
ef34378b1d
Merge pull request #7201 from jepler/rp2040-light-sleep
...
raspberrypi: Make port_idle_until_interrupt work
2022-11-15 17:25:48 -06:00
Jeff Epler
ef93eda0a0
Merge pull request #7192 from bill88t/picow-debug
...
Fix pi cow debug compilation
2022-11-15 14:08:44 -06:00
Bill Sideris
6954e569b7
since it ain't leaving..
2022-11-15 00:05:01 +02:00
Bill Sideris
fde1c05e6d
Revert "remove lwip_src"
...
This reverts commit 398e9122a0
.
It fails on LINK without them.
2022-11-14 20:03:41 +02:00
Bill Sideris
398e9122a0
remove lwip_src
2022-11-14 19:33:06 +02:00
Bill Sideris
6ad61a3fd1
Radio.c work
2022-11-14 19:31:18 +02:00
Bill Sideris
2e6dd1bf1f
Radio.c no longer needs ping.h
2022-11-14 18:36:42 +02:00
Jeff Epler
cdab078d9d
shared-bindings: Get rid of CYW43 special cases in shared-bindings
...
.. by moving it into a new weak function that can be replaced
just by the picow build.
2022-11-14 08:44:08 -06:00
Dominic Davis-Foster
e1046b1050
Add support for the 16MB WeAct Studio Pico
2022-11-14 14:04:07 +00:00
Dan Halbert
8f414eb4ee
Merge pull request #7179 from jepler/picow-voltage-monitor
...
Add ability to read VOLTAGE_MONITOR on Pico W
2022-11-13 22:40:54 -05:00
Jeff Epler
e4d620f055
make whitespace match
2022-11-12 09:17:52 -06:00
Jeff Epler
78fc43baab
raspberrypi: Make port_idle_until_interrupt work
...
This needs thorough testing before it's merged, as we tried
and reverted this once before (#5341 and #5356 ).
I think that besides checking for tinyusb having "something to do",
the fact that `port_interrupt_after_ticks` and `port_disable_tick`
weren't implemented that was causing a secondary problem.
I've tested this on a pico w over reboot-cycles and ctrl-c-cycles,
with and without drive automounting, with and without serial repl open,
and on a power-only connection.
I didn't notice the problem reported in #5356 after merely implementing
port_idle_until_interrupt; but I did notice that sleeps in general would
take over-long until "something" (like writing to the USB drive) happened;
I think "something" was probably calling port_enable_tick(). When this
problem was happening, sleeps would take a lot longer; for instance,
`sleep(.001)` would take about 1/20s and `sleep(.1)` would take about 1/7s.
2022-11-12 09:16:41 -06:00
Dan Halbert
983502d6e3
ignore pin changes before sleep
2022-11-11 15:31:49 -05:00
Bill Sideris
e6a4e2982f
Update ports/raspberrypi/common-hal/wifi/Radio.c
...
u32_t -> uint32_t
Co-authored-by: MicroDev <70126934+MicroDev1@users.noreply.github.com>
2022-11-11 14:40:47 +02:00
Bill Sideris
0bf9df232a
fix debug
2022-11-11 14:17:57 +02:00
paul-1
11f1174658
picow: Change init to use country code routine.....place holder for future improvements to allow country code setting.
2022-11-10 17:24:09 +02:00
paul-1
851c2cd8cb
picow: Add channel setting when starting AP
2022-11-10 17:23:59 +02:00
paul-1
8fdb2df0bf
picow: enable dhcpserver for apmode.
2022-11-10 17:23:38 +02:00
Bill Sideris
25c0a0aca9
Merge branch 'adafruit:main' into picow-ap
2022-11-10 17:04:21 +02:00
Jeff Epler
7f36a365cf
delay 100us for analog voltage to stabilize
...
.. otherwise, depending on the prior state of the pin as a digital
input, the value read could be 20% low.
2022-11-08 10:43:14 -06:00
Jeff Epler
09f6919c93
Add ability to read VOLTAGE_MONITOR on Pico W
...
Because this must be treated like an in-use pin for all other purposes,
unfortunately a special case must be added in shared-bindings.
Multiple AnalogIn objects for VOLTAGE_MONITOR can be created (because
in use tracking isn't working) but this causes no harm.
Testing performed: Read the monitor, then imported wifi. When the
pin state was insufficiently restored, the second step would fail
with debug messages about do_ioctl timeout.
```
import analogio, board
a = analogio.AnalogIn(board.VOLTAGE_MONITOR)
print(a.value)
import wifi
```
Closes : #7020
2022-11-08 09:37:15 -06:00
Jeff Epler
452ebe27ae
socketpool: make socket objects selectable
...
.. which will lead to them being usable in async contexts, pending
relevant changes in asyncio
2022-11-05 12:05:19 -05:00
Petr Sedlacek
f3ec46bbb5
Add missing pin definitions for 42. Keebs Frood
2022-11-04 15:33:16 +01:00
Jeff Epler
403a5b2681
Merge pull request #7126 from jepler/scorpio
...
add feather rp2040 scorpio
2022-11-02 14:47:40 -05:00
Dan Halbert
ded134c346
store wake_alarm in a static object
2022-10-29 16:26:36 -04:00
Dan Halbert
0221cc8df7
Merge remote-tracking branch 'adafruit/main' into alarm-lifetime
2022-10-28 14:11:32 -04:00