Commit Graph

20 Commits

Author SHA1 Message Date
robert-hh 29e9573de7 esp32: Use always machine_pin_get_id for getting a Pin id.
This applies to all machine modules which have pins as arguments.  Since
machine_pin_get_id() calls pin_find(), these pin arguments may be at the
moment either integer objects or Pin objects.  That allows for instance to
write

    uart = UART(1, tx=Pin(4), rx=Pin(5))

instead of

    uart = UART(1, tx=4, rx=5)

which is consistent with other ports.  Since this handling is done at a
single place in the code, extending that scheme to accept strings for named
pins is easy.

Signed-off-by: robert-hh <robert@hammelrath.com>
2023-07-20 17:33:04 +10:00
Damien George e4650125b8 esp32: Update port to support IDF v5.0.2.
This commit updates the esp32 port to work exclusively with ESP-IDF v5.
IDF v5 is needed for some of the newer ESP32 SoCs to work, and it also
cleans up a lot of the inconsistencies between existing SoCs (eg S2, S3,
and C3).

Support for IDF v4 is dropped because it's a lot of effort to maintain both
versions at the same time.

The following components have been verified to work on the various SoCs:

                ESP32     ESP32-S2  ESP32-S3  ESP32-C3
    build       pass      pass      pass      pass
    SPIRAM      pass      pass      pass      N/A
    REPL (UART) pass      pass      pass      pass
    REPL (USB)  N/A       pass      pass      N/A
    filesystem  pass      pass      pass      pass
    GPIO        pass      pass      pass      pass
    SPI         pass      pass      pass      pass
    I2C         pass      pass      pass      pass
    PWM         pass      pass      pass      pass
    ADC         pass      pass      pass      pass
    WiFi STA    pass      pass      pass      pass
    WiFi AP     pass      pass      pass      pass
    BLE         pass      N/A       pass      pass
    ETH         pass      --        --        --
    PPP         pass      pass      pass      --
    sockets     pass      pass      pass      pass
    SSL         pass      ENOMEM    pass      pass
    RMT         pass      pass      pass      pass
    NeoPixel    pass      pass      pass      pass
    I2S         pass      pass      pass      N/A
    ESPNow      pass      pass      pass      pass
    ULP-FSM     pass      pass      pass      N/A
    SDCard      pass      N/A       N/A       pass
    WDT         pass      pass      pass      pass

Signed-off-by: Damien George <damien@micropython.org>
Signed-off-by: Jim Mussared <jim.mussared@gmail.com>
2023-06-23 15:34:22 +10:00
Maripo GODA fb0dd86b39 esp32/machine_sdcard: Change dma_channel to SPI_DMA_CH_AUTO for ESP32S3.
Specifying DMA channel 2 causes an "invalid dma channel" error.  In
ESP-IDF, the only available channel for ESP32S3 is SPI_DMA_CH_AUTO=3.
2023-01-19 13:13:42 +11:00
Jim Mussared 94beeabd2e py/obj: Convert make_new into a mp_obj_type_t slot.
Instead of being an explicit field, it's now a slot like all the other
methods.

This is a marginal code size improvement because most types have a make_new
(100/138 on PYBV11), however it improves consistency in how types are
declared, removing the special case for make_new.

Signed-off-by: Jim Mussared <jim.mussared@gmail.com>
2022-09-19 19:06:15 +10:00
Jim Mussared 9dce82776d all: Remove unnecessary locals_dict cast.
Signed-off-by: Jim Mussared <jim.mussared@gmail.com>
2022-09-19 19:06:01 +10:00
Jim Mussared 662b9761b3 all: Make all mp_obj_type_t defs use MP_DEFINE_CONST_OBJ_TYPE.
In preparation for upcoming rework of mp_obj_type_t layout.

Signed-off-by: Jim Mussared <jim.mussared@gmail.com>
2022-09-19 19:06:01 +10:00
Damien George d108fc9c47 esp32/machine_sdcard: Free SPI bus when deiniting SD card.
So that everything is reset and the SD card can be created again after
calling SDCard.deinit() (and after a soft reset).

Fixes issue #8949.

Signed-off-by: Damien George <damien@micropython.org>
2022-08-30 12:54:18 +10:00
Seon Rozenblum 1904833e0c esp32: Add SDCard support for S3, and a GENERIC_S3_SPIRAM board.
Also add support for GPIO 47 and 48 on S3 boards.
2021-11-19 14:05:55 +11:00
Damien George 4eb13c50cd esp32/machine_sdcard: Use deinit_p to deinit SD bus in SPI mode.
Fixes issue #7352.

Signed-off-by: Damien George <damien@micropython.org>
2021-06-18 09:55:22 +10:00
Damien George 66a86a0615 esp32: Add initial support for ESP32S2 SoCs.
Builds against IDF v4.3-beta2.

Signed-off-by: Damien George <damien@micropython.org>
2021-04-15 10:31:06 +10:00
cccc 1662a0b06f esp32/machine_sdcard: Add "freq" keyword arg to SDCard constructor.
To allow high speed access.
2020-05-28 12:19:04 +10:00
Thorsten von Eicken 1ae7e0e561 esp32: Consolidate check_esp_err functions and add IDF error string.
This commit consolidates a number of check_esp_err functions that check
whether an ESP-IDF return code is OK and raises an exception if not.  The
exception raised is an OSError with the error code as the first argument
(negative if it's ESP-IDF specific) and the ESP-IDF error string as the
second argument.

This commit also fixes esp32.Partition.set_boot to use check_esp_err, and
uses that function for a unit test.
2020-04-23 10:59:07 +10:00
Damien George 8e048d2548 all: Clean up error strings to use lowercase and change cannot to can't.
Now that error string compression is supported it's more important to have
consistent error string formatting (eg all lowercase English words,
consistent contractions).  This commit cleans up some of the strings to
make them more consistent.
2020-04-13 22:19:37 +10:00
Jim Mussared def76fe4d9 all: Use MP_ERROR_TEXT for all error messages. 2020-04-05 15:02:06 +10:00
Damien George 1a3e386c67 all: Remove spaces inside and around parenthesis.
Using new options enabled in the uncrustify configuration.
2020-03-28 23:36:44 +11:00
Damien George feb2577585 all: Remove spaces between nested paren and inside function arg paren.
Using new options enabled in the uncrustify configuration.
2020-03-25 00:39:46 +11:00
Damien George 69661f3343 all: Reformat C and Python source code with tools/codeformat.py.
This is run with uncrustify 0.70.1, and black 19.10b0.
2020-02-28 10:33:03 +11:00
Damien George cfe1c5abf8 extmod/vfs: Rename BP_IOCTL_xxx constants to MP_BLOCKDEV_IOCTL_xxx.
Also rename SEC_COUNT to BLOCK_COUNT and SEC_SIZE to BLOCK_SIZE.
2019-10-29 14:17:29 +11:00
Nicko van Someren 1a51fc9ddf esp32/machine_sdcard: Fix bug in SPI slot number selection.
And fix minor typo in docs when referring to SDCard class.
2019-06-17 12:36:22 +10:00
Nicko van Someren 8e3af7d4c8 esp32: Add machine.SDCard class using built-in HW SD/MMC controller.
This adds support for SD cards using the ESP32's built-in hardware SD/MMC
host controller, over either the SDIO bus or SPI.  The class is available
as machine.SDCard and using it can be as simple as:

    uos.mount(machine.SDCard(), '/sd')
2019-06-03 00:37:41 +10:00