ee5884bfe9
nrf5/modules: Updating readfrom function in machine i2c module to use the new hal function which has been implemented.
2017-03-04 21:44:23 +01:00
2c61b7f596
nrf5/hal: Adding untested implementation of twi read. Lacking sensors to test with :)
2017-03-04 21:42:36 +01:00
4a631a0d47
nrf5/boards: Renaming linker script for all nrf51 and nrf52 into more logical names. Updating all boards with new names.
2017-03-04 19:13:59 +01:00
ab0d9756f1
nrf5/bluetooth: Updating header guard in bluetooth_conf.h to reflect new filename.
2017-03-04 18:05:51 +01:00
56d106507a
nrf5/bluetooth: Updating old references to 'sdk' to use the new folder name 'bluetooth' in makefiles.
2017-03-04 17:58:31 +01:00
9e36242259
nrf5: Renaming sdk folder to bluetooth.
2017-03-04 17:54:15 +01:00
5e89a27ba1
nrf5: Merging sdk makefiles into bluetooth_common.mk. s1xx_iot is still left out of this refactoring.
2017-03-04 17:52:20 +01:00
ec35861938
nrf5: Renaming nrf5_sdk_conf.h to bluetooth_conf.h
2017-03-04 17:19:29 +01:00
309ae12346
nrf5: Starting process of renaming files in sdk folder to facilitate renaming of the folder and make it more logical. Transition will be from sdk to bluetooth.
2017-03-04 15:06:08 +01:00
80c9c2e3c0
nrf5/boards: Adding support for SPI, I2C, ADC, and Temp in machine modules in micro:bit target. Also activating hal drivers for the peripherals.
2017-03-04 02:14:50 +01:00
f2a7e198d2
nrf5/sdk: Updating low frequency clock calibration from 4 seconds to 250 ms for stack enable when BLUETOOTH_LFCLK_RC is enabled.
2017-03-04 01:36:06 +01:00
ef6d583ec3
nrf5/boards: Updating nrf51822_aa_s110.ld to be more generic, leaving all RAM not used for stack, .bss and .data to the heap.
2017-03-04 01:29:05 +01:00
1aeb74a426
nrf51: Removing stack section from startup file as it got added to the final hex file. Thanks dhylands for helping out.
2017-03-04 01:24:10 +01:00
2af06bd3fa
nrf5/boards: Adding BLUETOOTH_LFCLK_RC to CFLAGS in microbit s110 makefile.
2017-03-03 23:21:47 +01:00
e95ec1a285
nrf5/sdk: Adding support for initializing the bluetooth stack using RC oscillator instead of crystal. If BLUETOOTH_LFCLK_RC is set in CFLAGS, this variant of softdevice enable will be activated.
2017-03-03 23:20:38 +01:00
3ab6aa3a6d
tests/basic: Split tests into working with small ints and not working.
...
Tests which don't work with small ints are suffixed with _intbig.py. Some
of these may still work with long long ints and need to be reclassified
later.
2017-03-04 00:13:27 +03:00
89e570a5b4
tests/run-tests: Check for big int availability and skip related tests.
...
Big aka arbitrary-precision integers (implemented by MPZ module) are used
in tests starting with "int_big_" or ending with "_intbig".
2017-03-03 20:16:59 +03:00
5e83a75c78
unix: Remove remaining, obsolete traces of GNU readline support.
2017-03-03 17:55:40 +11:00
3d91c12d33
tests/basics: Add further tests for OrderedDict.
2017-03-03 11:23:54 +11:00
9275c18270
py/map: Fix bugs with deletion of elements from OrderedDict.
...
There were 2 bugs, now fixed by this patch:
- after deleting an element the len of the dict did not decrease by 1
- after deleting an element searching through the dict could lead to
a seg fault due to there being an MP_OBJ_SENTINEL in the ordered array
2017-03-03 11:21:19 +11:00
c300e3f196
nrf5: Initialize repl_display_debugging_info in pyexec.c for cortex-m0 targets.
2017-03-03 00:40:44 +01:00
159202ad00
lib/utils: Expose pyb_set_repl_info function public
...
The patch enables the possibility to disable or initialize the repl
info from outside of the module. Can also be used to initialize the
repl_display_debugging_info in pyexec.c if not startup file is clearing
.bss segment.
2017-03-03 00:36:25 +01:00
235c0edacb
nrf5/sdk: Updating ringbuffer.h to use volatile variables for start and end.
2017-03-03 00:11:42 +01:00
d057a93675
nrf5/sdk: Rename cccd_enable variable to m_cccd_enable in bluetooth le UART driver. Also made the variable volatile.
2017-03-03 00:06:51 +01:00
df31508d6f
nrf5/modules: Updating example in ubluepy header to use handle instead of data length upon reception of an event.
2017-03-03 00:05:09 +01:00
db3dd8bc8b
nrf5/modules: Updating ubluepy peripheral to pass handle value to python event handler instead of data length. Data length can be derived from the bytearray structure.
2017-03-03 00:04:13 +01:00
22f66e274d
nrf5/sdk: Updating bluetooth le driver to handle SEC PARAM REQUEST by replying that pairing is not supported. Moving initialization of adv and tx in progress state variables to stack enable function.
2017-03-02 22:48:04 +01:00
4efedb67b6
nrf5/modules: Enable ubluepy constants for CONNECT and DISCONNECT for other bluetooth stacks than s132.
2017-03-02 22:43:06 +01:00
e60fa9b3e1
nrf5/sdk: Fixing unaligned access issues for nrf51 (cortex-m0) in bluetooth le driver
2017-03-02 21:25:51 +01:00
845a80a6c8
msvc: Add machine/pin-related sources to build
...
This fixes unresolved references after [f1ea3bc
2017-03-02 09:54:03 +01:00
e4be56a0ea
qemu-arm: Enable machine module and associated tests.
2017-03-02 16:39:58 +11:00
4f3c1b3fc1
stmhal/modnwcc3k: Add include for mp_hal_delay_ms.
2017-03-02 16:17:34 +11:00
ecc635d551
tests/extmod: Add test for machine.Signal class.
2017-03-02 16:09:16 +11:00
f1ea3bc72b
unix/modmachine: Add Signal class to machine module.
2017-03-02 16:08:20 +11:00
78185e6a6c
stmhal/modpyb: Use utime ticks ms/us functions instead of custom ones.
2017-03-02 15:43:14 +11:00
89738e8240
stmhal: Rename sys_tick ticks/delay functions to corresp. mp_hal ones.
...
The renames are:
HAL_Delay -> mp_hal_delay_ms
sys_tick_udelay -> mp_hal_delay_us
sys_tick_get_microseconds -> mp_hal_ticks_us
And mp_hal_ticks_ms is added to provide the full set of timing functions.
Also, a separate HAL_Delay function is added which differs slightly from
mp_hal_delay_ms and is intended for use only by the ST HAL functions.
2017-03-02 15:32:32 +11:00
6ab5512132
stmhal: Use mp_hal_delay_ms instead of HAL_Delay.
2017-03-02 15:02:57 +11:00
44c9888511
nrf5/sdk: Removing SDK dependant BLE UART Service implementation
...
The sdk_12.1.0 nrf52_ble.c implementation was dependent on SDK components.
This has been replaced with the ble_uart.c implementation using a standalone
bluetooth driver implementation without need of SDK components.
Also, sdk.mk has been updated to not use a special linker script.
2017-03-01 00:05:04 +01:00
f88ad9f5ab
nrf52: Removing folder to not confuse which folder is in development
2017-02-28 23:57:08 +01:00
58cc59cfbe
nrf5/sdk: Removing ble_repl_linux.py
...
Script does not really work very well with blocking char read and
async ble notifications printing data when terminal stdout is blocked
by readchar. Bluetooth UART profile implemented in ble_uart.c is
now working with tralamazza's nus_console nodejs script.
Ref: https://github.com/tralamazza/nus_console
2017-02-28 23:40:46 +01:00
ac677efb8b
nrf5: Add default config for MICROPY_PY_BLE_NUS (0)
...
Disable Bluetooth UART to be used for REPL by default. Can be overridden
in nrf5_sdk_conf.h. It is defined in mpconfigport.h as it is connected to
mphalport.c, where the config is used to determine whether default print
functions should be using HW UART or Bluetooth UART.
2017-02-28 23:33:54 +01:00
e8761682b7
nrf5/sdk: Add ble_uart.c to source list
...
ble_uart.c implements UART Bluetooth service on top of the
bluetooth stack driver api calls. Can be enabled to be compiled
in by defining MICROPY_PY_BLE_NUS = 1 in nrf5_sdk_conf.h.
2017-02-28 23:30:36 +01:00
84313b0261
nrf5/sdk: Removing include of sdk_12.1.0's build.mk
...
As no sources are needed from the SDK this build makefile
can be deleted.
2017-02-28 23:28:09 +01:00
9472196ee7
nrf5: Force implementation of tx_str_cooked function if BLE NUS enabled.
...
If BLE UART service has been enabled, the mp_hal_stdout_tx_strn_cooked
is not defined by default anymore, and has to be implemented by the
UART driver (in this case BLE).
2017-02-28 23:18:31 +01:00
216c97ff9a
nrf5/sdk: Adding compiler guard around exchange MTU request event.
...
As s110 is not having this event or function call to answer on a MTU
exchange request, this is excluded for all other version than s132
for now.
2017-02-28 23:13:02 +01:00
c1ffac9998
Merge pull request #1 from ajbaabf/nrf5_no_sdk
...
added support for hardware temperature sensor
2017-02-28 08:33:11 +01:00
1f549a3496
docs/library/lcd160cr: Add note about supported JPEG format/encodings.
2017-02-28 17:45:24 +11:00
0e723091f9
minor documentation and extra tabs removal fixes
2017-02-28 09:34:13 +03:00
382f718cfc
nrf5/sdk: Updating BLE UART implementation by swapping TX and RX uuid and characterisitic handling. Removed dummy write delay of 10 ms.
2017-02-27 23:47:47 +01:00
b032d765ff
nrf5/sdk: Backing up progress in bluetooth le driver. Adding new gap and gatts handlers. Added handling of tx complete events when using notification, responding to MTU request, and setting of default connection parameters.
2017-02-27 23:40:39 +01:00
Glenn Ruben Bakke
Paul Sokolovsky
Damien George
stijn
Peter Hinch
Bander Ajba