4683e48337
Further formatting changes related to whitespaces
2023-02-18 14:40:12 +05:30
ead5751803
Pre-commit: Done the formatting changes
...
Pre-commit: Fixed compilation error for other ESP32C3/ESP32S3/ESP32H2 boards
Review comment: Removed the self->pin NULL check
Review comment: Using raise_ValueError_invalid_pin when adc_index is not ADC_UNIT1 for ESP32
Review comment: Optimized the code to set data in buffer from DMA results
Fix: For ESP32C3 boards continuing collecting samples after channel mismatch as DMA runs in alternating UNIT mode
Fix: For ESP32S3 and ESP32H2 setting conversion mode to type2
2023-02-18 14:26:50 +05:30
508f2015b6
Merge pull request #7605 from Neradoc/pico-uart-in-use-error
...
Tweak the UART in use message on RP2040
2023-02-18 08:35:52 +05:30
13716c9c30
tweak the UART in use message on RP2040
2023-02-17 23:29:44 +01:00
58532ece3f
Moved CIRCUITPY_ANALOGBUFIO flag to correct place in alphabetical order
2023-02-17 23:50:41 +05:30
f71b418a7d
Merge branch 'adafruit:main' into settings-toml-pystack
2023-02-17 16:58:03 +02:00
8a4a408707
Disable settable-pystack too to make more space
2023-02-17 16:35:16 +02:00
5635077853
Espressif analogbufio implementation
2023-02-17 19:19:15 +05:30
388279d9c1
Disable rainbowio instead.
2023-02-17 15:24:27 +02:00
17e2598fa1
Revert "settable pystack = 0 for kicksat-sprite"
...
This reverts commit f05c730a01
2023-02-17 15:23:01 +02:00
a2c22521b4
Updates to waveshare-esp32s2-pico board definition
2023-02-17 15:16:18 +02:00
f05c730a01
settable pystack = 0 for kicksat-sprite
2023-02-17 15:14:09 +02:00
bbadc00599
Merge pull request #7577 from dhalbert/safemode-py
...
Implement safemode.py
2023-02-16 14:15:20 -05:00
fd1c3ca784
Increase number of LWIP timers for MDNS
2023-02-15 16:40:45 -08:00
931c7c1c51
Add Bangle.js 2, JDI memory displays and ACeP epd
...
This 2-in-1 PR started with the goal of support the Bangle.js 2
smartwatch with *no USB*.
* Adds "secure" DFU build support with a committed private key.
* Adds 3-bit color support with one dummy bit for the JDI memory display
* Allows nrf boards to have a board_background_task() run in RUN_BACKGROUND_TASK.
This is needed because the Bangle.js 2 uses the watchdog to reset.
* Renamed port_background_task() to port_background_tick() to indicate it
runs on tick, not RUN_BACKGROUND_TASK.
* Marks serial connected when the display terminal is inited. This means
that safe mode messages show up on the display.
ACep, 7-color epaper displays also pack 3 bits in 4. So, I added that
support as well.
* Adds 3-bit ACeP color support for 7-color e-paper displays. (Not
watch related but similar due to color depth.)
* Allows a refresh sequence instead of a single int command. The 7" ACeP
display requires a data byte for refresh.
* Adds optional delay after resetting the display. The ACeP displays
need this. (Probably to load LUTs from flash.)
* Adds a cleaning phase for ACeP displays before the real refresh.
For both:
* Add dither support to Palette.
* Palette no longer converts colors when set. Instead, it caches
converted colors at each index.
* ColorConverter now caches the last converted color. It should make
conversions faster for repeated colors (not dithering.)
2023-02-15 15:03:40 -08:00
f79459cb70
Try -fweb -frename-registers to make more SAMD21 builds fit
2023-02-15 16:38:24 -05:00
fe40181144
Turn back on for pewpew_m4, turn off terminalio for incomplete fonts in pewpew_m4
2023-02-15 14:45:15 -05:00
32d86c3ea3
Merge pull request #7580 from adafruit/8.0.x
...
Merge 8.0.x up to main
2023-02-15 09:16:51 +05:30
48077daa7f
Merge pull request #7581 from gneverov/issue_7333
...
Add function common_hal_busio_uart_never_reset for rp2
2023-02-15 09:16:25 +05:30
0be53977f9
Merge pull request #7570 from RetiredWizard/broadcomNeopix
...
Broadcom pi zero2w neopixel misbehaving/crash fix
2023-02-14 09:56:18 -08:00
98b61279e4
Add function common_hal_busio_uart_never_reset for rp2
2023-02-14 09:05:24 -08:00
0f099cdb31
Turn off safemode.py for pewpew_m4
2023-02-13 22:52:39 -05:00
c39a51527f
Turn safemode.py off on non-external-flash SAMD21 builds
2023-02-13 21:48:03 -05:00
6ebb911a4d
pre-commit formatting fix
2023-02-13 21:06:47 -05:00
09ccf2988d
Replace bitwise or with boolean or
2023-02-13 21:04:11 -05:00
39d3d97ea4
Remove unnecessary memory barriers
2023-02-13 19:46:35 -05:00
fa435468fa
Merge branch 'main' into gif_displayio_support
2023-02-13 18:30:51 -06:00
d8231f1588
Implement safemode.py
2023-02-13 18:26:38 -05:00
be67cb72ad
Disable for pewpew_m4 for space
2023-02-13 17:04:54 -06:00
dcb6955fa5
use boolean and symbols
2023-02-13 14:58:37 -05:00
791aefd388
Update ports/broadcom/common-hal/neopixel_write/__init__.c
...
Co-authored-by: Scott Shawcroft <scott@tannewt.org>
2023-02-13 14:44:54 -05:00
575f177dd0
Update ports/broadcom/common-hal/neopixel_write/__init__.c
...
Co-authored-by: Scott Shawcroft <scott@tannewt.org>
2023-02-13 14:44:46 -05:00
7d236f2782
Merge pull request #7547 from ajs256/add_sprig
...
Add new board hack_club_sprig
2023-02-13 10:25:04 -08:00
676cbb308d
minor update to boards.c to fix mismatched number of LEDs causing LEDs not to be reset
2023-02-13 09:52:18 -06:00
5c2bd38684
Removed gifio module from tests
2023-02-13 09:40:16 -06:00
ec90d79d61
Merge pull request #7553 from kamtom480/sdk2.6.0
...
spresense: update SDK to 2.6.0
2023-02-13 09:04:35 -05:00
1679790481
Tweaked to run without delays on zero w
2023-02-11 20:21:25 -05:00
359a27e166
Pre-commit is stubborn
2023-02-11 12:19:21 -05:00
2104708c58
missed a trailing space
2023-02-11 12:17:55 -05:00
f29cd4a836
Pre-commit fix trim trailing whitespace
2023-02-11 12:13:34 -05:00
a462a316bd
Fix pre-commit formatting
2023-02-11 12:10:03 -05:00
a2bbca1428
Broadcom Raspberry Pi Zero2W neopixel timing fix
...
These changes result in working neopixel functionality. I've tested on
both the zero2w and the pi4b (The 4b didn't exhibit the original issue)
and the boards now behave properly with 1 to 30 pixels and the board hanging
no longer occurs.
Remove mod that didn't help during testing
Restoring back to original structure
Replace 2 microsecond delay w/deterministic loop
Remove unneded check for empty queue
Put transmit delay outside loop so Queue is used
Make sure last transmission is complete
2023-02-11 11:38:11 -05:00
e125370cd4
first commit
2023-02-09 01:59:59 +00:00
b9f689adf4
Use lowest drive level for PIO
2023-02-08 16:18:58 -06:00
e78143a2f5
fix copyright header
2023-02-05 11:18:23 -08:00
07e8506b79
Add board hack_club_sprig
2023-02-03 20:19:11 -08:00
b03eed32fb
espressif: i2sout: wait a short time to succesfully write data
2023-02-03 14:22:03 -06:00
41dff5d8cc
espressif: i2sout: don't needlessly set sample rate
...
this may reduce glitches when starting samples
2023-02-03 14:22:03 -06:00
75ed28665c
espressif: i2sout: enlarge buffers
2023-02-03 14:22:03 -06:00
f13e6d8758
update flash chip for Metro M7 1011
2023-02-03 11:56:42 -05:00
aafec496c3
Merge pull request #7539 from DavePutz/issue_7419
...
Correct assignment of RMT channels on ESP32C3
2023-02-02 17:35:37 -05:00
750535d4af
Correct assignment of RMT channels on ESP32C3
2023-02-02 14:55:57 -06:00
77c6daf4b8
don't throw exception
2023-02-01 16:33:22 -08:00
3fdebd4f60
spresense: Add HDR camera support
2023-02-01 12:37:29 +01:00
d9d94eacca
run updated pre-commit
2023-02-01 13:38:41 +05:30
9ab0733a28
Merge pull request #7530 from BrainBoardz/main
...
BrainBoardz Neuron Commit (Final I Hope!) - Updated as Per Previous Instructions VID+PID Work
2023-01-31 23:33:34 -05:00
2656ccffe4
Commit01-31
2023-01-31 19:35:57 -05:00
2faa8a435a
Merge pull request #7510 from BPI-STEAM/CircuitPython-main
...
Update mpconfigboard.h with LED definition for BPI-Bit-S2.
2023-01-31 16:08:10 -05:00
e1041a8625
Merge pull request #7509 from RetiredWizard/seeedc3
...
seeed_xiao_esp32c3 flash mode change to dio
2023-01-31 11:29:24 -08:00
b8d6f20308
Add front buttons as D0/1/2, matching the silk
2023-01-31 10:02:21 -06:00
f3b1ceeb81
Seventh Commit
2023-01-30 20:45:57 -05:00
f71b4bc018
Sixth Commit
2023-01-30 20:32:19 -05:00
e10816f34c
Fifth Commit
2023-01-30 20:20:37 -05:00
3f3519e0ab
Fourth Commit
2023-01-30 20:10:34 -05:00
7c525fdcb0
Third Commit
2023-01-30 19:54:11 -05:00
34f480d735
Second Commit
2023-01-30 19:03:57 -05:00
d6ebf1bf43
First commit
2023-01-30 17:12:21 -05:00
6e31cd0a4f
Update mpconfigboard.h
2023-01-30 15:41:42 +08:00
dc5cd27555
seeed_xiao_esp32c3 flash mode change to dio
...
I was having trouble flashing CircuitPython to the Seeed xiao
esp32c3 using the make flash option. With the help of DAN and
Neradoc I was able to perform a manual flash and use the make
flash option to flash an Adafruit_qtpy_esp32c3 bin but when I
went back and attempted to use make flash on the seeed bin it didn't
work. Comparing the builds, the flash mode was different and after
making this change the seeed build now flashes properly using make
flash.
2023-01-30 02:01:33 -05:00
f7167bd735
Merge pull request #5999 from anecdata/ESP32-S3-DevKitC-1-N32R8
...
Espressif ESP32-S3 DevKitC-1-N32R8
2023-01-29 10:27:08 +05:30
858e212e34
enable octal flash in sdkconfig
2023-01-29 00:23:02 +05:30
7522522a0a
Merge pull request #7501 from pypewpew/pewpewm4-cdc
...
pewpew m4: enable CDC back
2023-01-28 12:00:49 -05:00
5b814a4561
pewpew m4: enable CDC back
...
CDC got disabled on this board by mistake
2023-01-28 17:20:22 +01:00
401d160c58
opi flash needs to be flashed in dout
2023-01-28 11:04:21 +05:30
cda5689263
move `esp32_camera` to `espcamera`
2023-01-27 22:05:43 +05:30
a7b12de6ee
Merge pull request #7473 from MicroDev1/espulp
...
Add ULP FSM
2023-01-26 09:57:35 -08:00
bfb77d0544
move `ULPArch` to `Architecture`
2023-01-26 13:01:14 +05:30
a6861adb1f
Merge branch 'main' of origin into ESP32-S3-DevKitC-1-N32R8
2023-01-26 11:21:43 +05:30
e5cfab060d
remove redundant config messages
2023-01-26 11:20:18 +05:30
90e8f9d4a8
fix espressif 32MB partition table
2023-01-26 11:19:22 +05:30
5fb0333aa9
Merge pull request #7478 from jepler/fix-esp32s3-reverse-tft-pid
...
Feather ESP32-S2 Reverse TFT: Update PID to match internal list
2023-01-25 21:24:00 -05:00
ace2062564
remove board that will not be manufactured
2023-01-25 15:10:06 -06:00
19c1eb2d1d
update esp-idf from latest release/v4.4
2023-01-25 15:44:43 -05:00
f56a6a92f4
Merge pull request #7474 from RetiredWizard/broadcomRTC
...
Broadcom port: Add 'fake' RTC support
2023-01-25 11:33:17 -08:00
9487fb51a4
prettify espressif partition tables
2023-01-25 19:40:14 +05:30
ecde85734c
Remove a couple unneeded includes.
2023-01-23 15:17:24 -05:00
fb4def2824
remove CIRCUITPY_RTC = 1 from mpconfigport.mk
...
Full build includes the RTC bits so don't need to enable it
in ports/broadcom/mpconfigport.mk
2023-01-23 14:52:20 -05:00
43b1d2618e
Remove erroneous left over comment
2023-01-23 14:19:27 -05:00
e018c6d022
Update PID to match internal list
2023-01-23 13:13:27 -06:00
4f830f1bbb
Fix parameter name and remove unnecessary function
2023-01-21 22:57:52 -05:00
3361ec390d
Broadcom port: Add 'fake' RTC support
...
The Broadcom chips apparently don't have an RTC, so this PR uses the
timer to add dummy RTC responses and allow resonable results
from time.localtime() as well as setting the time and date while
the board is powered.
2023-01-21 22:19:10 -05:00
2bb12293f8
add ulp fsm
2023-01-21 17:44:08 +05:30
13338df9f1
Merge pull request #7462 from tannewt/fix_rp2_reset_reason
...
Tweak RP2040 reset reason
2023-01-19 21:10:57 -05:00
f826904995
Merge pull request #7468 from DavePutz/issue_6975
...
Fixes for microcontroller.on_next_reset() on NRF
2023-01-19 19:03:46 -05:00
a30f69aaed
Fixes for microcontroller.on_next_reset() on NRF
2023-01-19 15:58:03 -06:00
8f9d1e241d
Save watch_for_interrupt_char to espressif too
2023-01-19 10:28:56 -08:00
dca66eb98c
Watch for ctrl-c over BLE workflow serial
...
Before this, it was impossible to interrupt a running program over
BLE.
2023-01-18 16:28:35 -08:00
f66e865510
Use low power RTC on mimxrt10xx (Teensy41) boards
...
There are apparently two RTC interfaces in the mimxrt10xx dev
kit. The low power interface access the battery backed up hardware.
I've tested this on the Teensy41 and it seems to
fix issue #4574
2023-01-17 23:30:36 -05:00
82a313065e
Tweak RP2040 reset reason
...
Watchdogs are used to reboot out of the bootloader. There is a
scratch register for user watchdogs. So use sdk functions to better
distinguish these.
Related to #7346
2023-01-17 16:12:08 -08:00
683e393878
Add comments for MDNS code
2023-01-17 14:07:30 -08:00
Milind Movasha
MicroDev
Neradoc
Bill Sideris
Dan Halbert
Gregory Neverov
Scott Shawcroft
Dan Halbert
RetiredWizard
Mark
gamblor21
Pierre Constantineau
Ubuntu
Jeff Epler
Alex
root
Gregory Neverov
Kamil Tomaszewski
brainboardz
Wind-stormger
Radomir Dopieralski