Commit Graph

74 Commits

Author SHA1 Message Date
danicampora
cd9bc14c8f cc3200: Add SPI module.
Only MASTER mode is supported. Transfer width is configurable to
8, 16 or 32 bits.
2015-03-21 11:26:47 +01:00
danicampora
f8ee88bbe0 cc3200: Move server methods from WLAN to the network module. 2015-03-19 17:08:25 +01:00
danicampora
0e96d1b3f1 cc3200: Add parameter to wlan_stop() for custom timeout values. 2015-03-18 21:55:08 +01:00
danicampora
6de1b39368 cc3200: Make peripheral objects static.
This prevents duplication of objects in the sleep list. Also helps
with reducing the code size by ~100 bytes.
2015-03-17 13:26:07 +01:00
danicampora
2c103d5200 cc3200: Rewrite the PRCM RTC functionality methods.
This allows to use the On-Chip retention registers for both the
RTC and to share notification flags between the bootloader and the
application. The two flags being shared right now are the "safe boot"
request and the WDT reset cause. we still have 2 more bits free for
future use.
2015-03-14 10:08:47 +01:00
danicampora
c7fabe1f3e cc3200: Remove unneeded code from modwlan and optimize startup time.
These changes also help reduce the hibernate wake-up time to 1s.
2015-03-14 10:08:43 +01:00
danicampora
9e44383e3f cc3200: Add power management framework. Add mpcallback class.
Supports suspend and hibernate modes. Waking is possible throug GPIO
and WLAN.
The mpcallback class is generic and can be reused by other classes.
2015-03-11 17:00:33 +01:00
danicampora
73aee8da54 cc3200: Merge ExtInt class into Pin class.
Also add another method to change the pin's interrupt mode
on the fly.
2015-03-11 17:00:28 +01:00
danicampora
26cbc91373 cc3200: Place functions only used while booting in a special section.
Such functions are never used after MicroPython has started, and they
remain in RAM wasting space. Now they are placed in a special section
named "boot" which sits just before the heap, allowing us to extend
the effective heap area up to the new boot section. Right now, this
gives us back ~1K, but in the future, more functions might end up in
there as well.
2015-03-11 16:59:29 +01:00
danicampora
d226dd2f59 cc3200: Add preliminary low power deep sleep support. 2015-03-11 16:54:09 +01:00
danicampora
d01060241a cc3200: Add heartbeat signal on system led. 2015-02-28 19:03:21 +01:00
danicampora
74589cbeeb cc3200: Move code that disables/enables servers to wlan_sl_enable(). 2015-02-26 11:19:15 +01:00
danicampora
7a074a14ce cc3200: Implement safe boot pin and system led behaviour.
The safe boot pin, when pulled high during reset rolls back the
firmware to the "factory" image and skips execution of 'boot.py'
and 'main.py'. This is useful to recover from a crash condition.
The system led is used mostly to signal errors.
2015-02-25 23:17:17 +01:00
danicampora
11aa6ba456 cc3200: Add WDT functionality as part of the pyb module.
Also improve pybsd, and make it save it's pin configuration.
This is a necessary step towards supporting the CC3200 low
power deep sleep (LPDS) mode.
2015-02-25 11:37:29 +01:00
danicampora
88b7f52ebb cc3200: Replace WLAN.get_ip() with WLAN.ifconfig().
Also change other methods' names to make them consistent.
2015-02-23 15:02:55 +01:00
danicampora
33ddb566a7 cc3200: Remove dependencies from FreeRTOS.
Use the simplelink wrappers instead. This is one step further
towards having a single module for the cc3200 and the cc3100.
2015-02-22 17:50:50 +01:00
Damien George
4a23a01945 cc3200: Add explicit py/ path-prefix for py includes.
This is how it should be, so one knows exactly where the includes are
coming from.
2015-02-21 18:58:43 +00:00
danicampora
c020109cfa cc3200: Add SD module and disable SD card support for the LAUNCHXL. 2015-02-21 14:19:40 +01:00
danicampora
6b21c3fdd6 cc3200: Refactor UART and I2C object creation.
I2C objects can be freed by the GC and a __del__ method is provided
in order to de-init the peripheral prior to being garbage collected.
UART objects are now added to a local list and this list is now part
of the VM_STATE.
2015-02-20 16:41:55 +01:00
danicampora
99f3f6b5de cc3200: Add I2C module. Only master mode is currently supported. 2015-02-13 17:54:04 +01:00
Damien George
0b32e50365 stmhal: Make pybstdio usable by other ports, and use it.
Now all ports can use pybstdio.c to provide sys.stdin/stdout/stderr, so
long as they implement mp_hal_stdin_* and mp_hal_stdout_* functions.
2015-02-13 15:04:53 +00:00
danicampora
53716fcc3e cc3200: Rename GPIO module to Pin.
This change helps making the cc3200 port API a bit closer to stmhal.
The ramaining differences are due to the specific hardware details
of each chip. One feature that has been deliberately disabled is the
possibility to add custom names and custom pin mappings. Those
features are nice and convenient, but in this port, code size is a
major concern.
2015-02-09 20:01:54 +01:00
Damien George
0bfc7638ba py: Protect mp_parse and mp_compile with nlr push/pop block.
To enable parsing constants more efficiently, mp_parse should be allowed
to raise an exception, and mp_compile can already raise a MemoryError.
So these functions need to be protected by an nlr push/pop block.

This patch adds that feature in all places.  This allows to simplify how
mp_parse and mp_compile are called: they now raise an exception if they
have an error and so explicit checking is not needed anymore.
2015-02-07 18:33:58 +00:00
danicampora
8785645a95 cc3200: Add cc3200 port of MicroPython.
The port currently implements support for GPIO, RTC, ExtInt and the WiFi
subsystem. A small file system is available in the serial flash. A
bootloader which makes OTA updates possible, is also part of this initial
implementation.
2015-02-06 22:10:11 +00:00