Commit Graph

19 Commits

Author SHA1 Message Date
Jim Mussared 0f9a9129da stm32/rfcore: Fix flow control for IPCC RX IRQ.
Don't clear the IPCC channel flag until we've actually handled the incoming
data, or else the wireless firmware may clobber the IPCC buffer if more
data arrives.  This requires masking the IRQ until the data is handled.

Signed-off-by: Jim Mussared <jim.mussared@gmail.com>
2021-01-30 13:21:04 +11:00
Jim Mussared 240b3de8bc stm32/rfcore: Depend on NimBLE only when BLE enabled.
This fixes the build for non-STM32WB based boards when the NimBLE submodule
has not been fetched, and also allows STM32WB boards to build with BLE
disabled.

Signed-off-by: Jim Mussared <jim.mussared@gmail.com>
2020-11-18 14:45:51 +11:00
Jim Mussared 21c293fbcd stm32/rfcore: Don't send HCI ACL cmds while another is pending.
And, for TX, the next/prev entries ane unused so set them to NULL to
indicate this.

Signed-off-by: Jim Mussared <jim.mussared@gmail.com>
2020-11-16 17:09:12 +11:00
Jim Mussared 119c88ef17 stm32/flash: Implement WB55 flash locking.
This is needed to moderate concurrent access to the internal flash, as
while an erase/write is in progress execution will stall on the wireless
core due to the bus being locked.

This implements Figure 10 from AN5289 Rev 3.

Signed-off-by: Jim Mussared <jim.mussared@gmail.com>
2020-11-16 17:08:30 +11:00
Jim Mussared a64121b0d4 stm32/rfcore: Make RX IRQ schedule the NimBLE handler.
This commit switches the STM32WB HCI interface (between the two CPUs) to
require the use of MICROPY_PY_BLUETOOTH_USE_SYNC_EVENTS, and as a
consequence to require NimBLE.  IPCC RX IRQs now schedule the NimBLE
handler to run via mp_sched_schedule.

Signed-off-by: Jim Mussared <jim.mussared@gmail.com>
2020-11-16 17:04:27 +11:00
Jim Mussared 61d1e4b01b extmod/nimble: Make stm32 and unix NimBLE ports use synchronous events.
This changes stm32 from using PENDSV to run NimBLE to use the MicroPython
scheduler instead.  This allows Python BLE callbacks to be invoked directly
(and therefore synchronously) rather than via the ringbuffer.

The NimBLE UART HCI and event processing now happens in a scheduled task
every 128ms.  When RX IRQ idle events arrive, it will also schedule this
task to improve latency.

There is a similar change for the unix port where the background thread now
queues the scheduled task.

Signed-off-by: Jim Mussared <jim.mussared@gmail.com>
2020-11-13 17:19:05 +11:00
Jim Mussared 893f75546c stm32/boards/NUCLEO_WB55/rfcore_firmware.py: Increase GET_STATE timeout.
When installing WS firmware, the very first GET_STATE can take several
seconds to respond (especially with the larger binaries like
BLE_stack_full).

Allows stm.rfcore_sys_hci to take an optional timeout, defaulting to
SYS_ACK_TIMEOUT_MS (which is 250ms).

Signed-off-by: Jim Mussared <jim.mussared@gmail.com>
2020-10-16 10:45:03 +11:00
Jim Mussared fa12bfc227 stm32/rfcore: Update to support WS=1.9.0.0.4.
This WS update to 1.9.0.0.4 broke the workaround used in rfcore for
OCF_CB_SET_EVENT_MASK2, so fix it to support WS 1.8 and 1.9.
2020-10-09 23:52:35 +11:00
Jim Mussared 7c76a2dfcf stm32/rfcore: Add Python API for basic rfcore operations.
The new functions provide FUS/WS status, version and SYS HCI commands:
- stm.rfcore_status()
- stm.rfcore_fw_version(fw_id)
- stm.rfcore_sys_hci(ogf, ocf, cmd)
2020-10-08 17:37:11 +11:00
Damien George 3e16763201 stm32/rfcore: Fix FUS layout and size of ipcc_device_info_table_t.
The device info table has a different layout when core 2 is in FUS mode.
In particular it's larger than the 32 bytes used when in WS mode and if the
correct amount of space is not allocated then the end of the table may be
overwritten with other data (eg with FUS version 0.5.3).  So update the
structure to fix this.

Also update rfcore.py to disable IRQs (which are enabled by rfcore.c), to
not depend on uctypes, and to not require the asm_thumb emitter.

Signed-off-by: Damien George <damien@micropython.org>
2020-09-22 14:08:22 +10:00
Jim Mussared e2390d5a2f stm32/rfcore: Enable RX IRQ on BLE IPCC channel for better performance.
Before this change there was up to a 128ms delay on incoming payloads from
CPU2 as it was polled by SysTick.  Now the RX IRQ immediately schedules the
PendSV.
2020-09-08 23:53:12 +10:00
Jim Mussared 8b4ebd7166 stm32/rfcore: Refactor some helper funcs, and remove some magic numbers.
Also explain what the payload fixup code is doing.
2020-09-08 23:53:12 +10:00
Jim Mussared 01f2d77614 stm32/rfcore: Fix length matching in HCI parser. 2020-09-08 23:53:12 +10:00
Jim Mussared 30e8162ac4 stm32/rfcore: Update rfcore.c to match how ST examples work.
- Split tables and buffers into SRAM2A/2B.
- Use structs rather than word offsets to access tables.
- Use FLASH_IPCCDBA register value rather than option bytes directly.
2020-09-08 23:53:02 +10:00
Damien George 4b5dd012e0 stm32/rfcore: Leave txpower level as default when initialising rfcore.
And provide a convenient API function to change it (currently unused).

Fixes issue #5985.

Signed-off-by: Damien George <damien@micropython.org>
2020-06-17 00:10:29 +10:00
stijn 84fa3312cf all: Format code to add space after C++-style comment start.
Note: the uncrustify configuration is explicitly set to 'add' instead of
'force' in order not to alter the comments which use extra spaces after //
as a means of indenting text for clarity.
2020-04-23 11:24:25 +10:00
Damien George e965363b6b stm32: Refactor Bluetooth HCI RX to be independent of transport layer.
Now all HCI specific code (eg UART vs WB55 internal messaging) is confined
to modbluetooth_hci.c.
2020-03-10 01:53:42 +11:00
Damien George 69661f3343 all: Reformat C and Python source code with tools/codeformat.py.
This is run with uncrustify 0.70.1, and black 19.10b0.
2020-02-28 10:33:03 +11:00
Damien George 6a64b280d0 stm32: Add support for RF coprocessor on WB55 MCUs.
This requires a BLE wireless stack firmware to be already programmed in the
secure flash area of the device.
2019-11-01 14:52:17 +11:00