Glenn Ruben Bakke
|
c3ccef800d
|
nrf5/modules/music: Backing up progress in music module.
|
2017-05-08 21:22:53 +02:00 |
|
Glenn Ruben Bakke
|
8d06dd3281
|
nrf5/drivers/pwm: Updating soft PWM driver to only be included if SOFT_PWM config is set.
|
2017-05-08 21:21:57 +02:00 |
|
Glenn Ruben Bakke
|
a4513f0159
|
nrf5/hal/gpio: Add function to clear output register using a pin mask.
|
2017-05-08 21:20:08 +02:00 |
|
Glenn Ruben Bakke
|
94efa02084
|
nrf5: Adding new configuration called MICROPY_PY_MACHINE_SOFT_PWM to mpconfigport.h. This config will enable software defined PWM using timer instead of using dedicated PWM hardware. Aimed to be used in nrf51 targets.
|
2017-05-08 21:14:34 +02:00 |
|
Glenn Ruben Bakke
|
ad6a1d9136
|
nrf5/boards: Removing PWM config set to 0 from pca10001 board. Config will later be re-introduced as SOFT_PWM variant.
|
2017-05-08 21:11:21 +02:00 |
|
Glenn Ruben Bakke
|
10cbc83cf0
|
nrf5/pwm: Updating config name of PWM to hardware PWM to prepare for introduction of soft variant.
|
2017-05-08 21:10:18 +02:00 |
|
Glenn Ruben Bakke
|
311ae77dc0
|
nrf5/modules/music: Backing up progress in modmusic.
|
2017-05-04 00:18:05 +02:00 |
|
Glenn Ruben Bakke
|
a7f10336e1
|
nrf5/modules/music: backing up porting progress in modmusic.c.
|
2017-05-02 22:40:31 +02:00 |
|
Glenn Ruben Bakke
|
d170ca5d03
|
nrf5/modules/music: Commenting out backend function calls in modmusic.c to make module compile for now.
|
2017-05-02 21:50:54 +02:00 |
|
Glenn Ruben Bakke
|
57442c2b25
|
nrf5/modules/music: Updating music module to use pin_obj_t instad of microbit_pin_obj_t. Update include to drivers/pwm.h to resolve some undefined functions.
|
2017-05-02 01:09:59 +02:00 |
|
Glenn Ruben Bakke
|
40b37227a0
|
nrf5/drivers/pwm: Work in progress commit of soft PWM from microbit repo.
|
2017-05-02 01:07:52 +02:00 |
|
Glenn Ruben Bakke
|
10e6b4309b
|
nrf5/modules/music: Removing c++ extern definition. Updating include list in modmusic.c. Removing module name from module struct.
|
2017-05-01 19:55:43 +02:00 |
|
Glenn Ruben Bakke
|
01441c8f59
|
nrf5/modules/music: Removing include of modmicrobit.h in musictunes.c.
|
2017-05-01 19:52:40 +02:00 |
|
Glenn Ruben Bakke
|
e766c7ebbe
|
nrf5/modules/music: Adding header to expose extern structs defined in musictunes.c
|
2017-05-01 19:51:47 +02:00 |
|
Glenn Ruben Bakke
|
5c6fc791e3
|
nrf5/drivers: Adding copy of microbit soft pwm.
|
2017-05-01 19:13:50 +02:00 |
|
Glenn Ruben Bakke
|
eedd9eabe9
|
nrf5/modules/music: Renaming microbitmusic files to modmusic/music.
|
2017-05-01 19:11:44 +02:00 |
|
Glenn Ruben Bakke
|
20bdb7dc90
|
nrf5/modules/music: Renaming microbit module to music.
|
2017-05-01 19:08:36 +02:00 |
|
Glenn Ruben Bakke
|
f9b9d59434
|
nrf5/modules/microbit: Copying microbit music module to the port.
|
2017-05-01 19:06:49 +02:00 |
|
Glenn Ruben Bakke
|
1c756af9a4
|
nrf5/modules/timer: Adding timer3 and timer4 to timer object in case of nrf52 target.
|
2017-04-30 20:18:46 +02:00 |
|
Glenn Ruben Bakke
|
a0638880b3
|
nrf5/modules/timer: Optimizing timer object structure and updating the module to use new hal_timer_init structures and parameters.
|
2017-04-30 20:15:03 +02:00 |
|
Glenn Ruben Bakke
|
0437fafaac
|
nrf5/hal/timer: Adding empty IRQ handlers for all timers.
|
2017-04-30 19:42:54 +02:00 |
|
Glenn Ruben Bakke
|
7449f8d861
|
nrf5/hal/timer: Changing hardcoded hal timer instance base to a lookup, so that IRQ num can be detected automatically without the need of using struct param on it. Size of binary does not increase when using Os.
|
2017-04-30 19:42:19 +02:00 |
|
Glenn Ruben Bakke
|
7aa7bad78a
|
nrf5: Updating example in main.c on how to execute string before REPL is set up, to allow for boards with two leds. Todo for later is to update this code such that it will skip this LED toggle when there are no leds defined. Or use an example not depending on LEDs.
|
2017-04-29 19:50:50 +02:00 |
|
Glenn Ruben Bakke
|
976785e1d5
|
nrf5/bluetooth: Updating Bluetooth LE stack download script to allow to be invoked from any parent folder. No need to change directory to bluetooth/ in order to get the correct download target folder position. Using the script location to determine the target folder.
|
2017-04-26 19:18:27 +02:00 |
|
Glenn Ruben Bakke
|
7bcc61b0c1
|
nrf5/boards: Adding board target for feather52 using s132 v.2.0.1 application offset even if the device is not using softdevice. To be worked on later.
|
2017-04-26 00:18:10 +02:00 |
|
Glenn Ruben Bakke
|
97d46bae6a
|
nrf5/boards: decrease size of ISR region from 4k to 1k in custom feather52 linker script to get some more flash space.
|
2017-04-26 00:16:19 +02:00 |
|
Glenn Ruben Bakke
|
3286d81a48
|
nrf5/boards: Updating feather52 mpconfigboard.h to use correct uart pins, flow control disabled. Also adjusting leds down to two leds.
|
2017-04-26 00:15:14 +02:00 |
|
Glenn Ruben Bakke
|
5f4798b0f2
|
nrf5/boards: Updating path to custom linker script for feather52 board.
|
2017-04-25 21:55:50 +02:00 |
|
Glenn Ruben Bakke
|
50bb18015a
|
nrf5/boards: Renaming bluefruit_nrf52_feather to feather52 to shorten down the name quite drastically.
|
2017-04-25 21:54:35 +02:00 |
|
Glenn Ruben Bakke
|
6f6c5d30e8
|
nrf5/boards: Updating path to custom bluefruit feather linker script after renaming board folder.
|
2017-04-25 21:51:10 +02:00 |
|
Glenn Ruben Bakke
|
4ae600be8a
|
nrf5/boards: Renaming bluefruit_feather to bluefruit_nrf52_feather as it also exist a m0 variant of the board name.
|
2017-04-25 21:49:17 +02:00 |
|
Glenn Ruben Bakke
|
8aa6e0388e
|
nrf5/boards: Updating mpconfigboard.h for bluefruit nrf52 feather with correct board, mcu and platform name.
|
2017-04-25 21:48:01 +02:00 |
|
Glenn Ruben Bakke
|
195c492419
|
nrf5/boards: Updating adafruit bluefruit nrf52 feather linker script to use 0x1c000 application offset.
|
2017-04-25 21:44:01 +02:00 |
|
Glenn Ruben Bakke
|
8429d022e1
|
nrf5/boards: Renaming custom linker script for bluefruit feather to reflect that the purpose of the custom linker script is DFU. The script is diverging from the generic s132 v2 linker script in the offset of the application.
|
2017-04-25 08:53:52 +02:00 |
|
Glenn Ruben Bakke
|
7043680f1f
|
nrf5/boards: Adding custom linker script for adafruit nrf52 bluefruit feather to be able to detect application upper boundry in flash. Pointing s132 mk file to use this new custom linker script instead of the generic s132 v2 linker script.
|
2017-04-25 08:49:18 +02:00 |
|
Glenn Ruben Bakke
|
ec6502c1ea
|
nrf5/boards: Adding linker script for nrf52832 s132 v.2.0.1.
|
2017-04-24 23:29:05 +02:00 |
|
Glenn Ruben Bakke
|
0ba9c62940
|
nrf5/boards: Adding template board makefiles and configs for bluefruit nrf52 feather. Copied from pca10040 target board. Linker script reference updated to use s132 v2.0.1. Non-BLE enable build disabled for now. Board configuration for leds, uart etc has not been updated yet from pca10040 layout.
|
2017-04-24 23:25:25 +02:00 |
|
Glenn Ruben Bakke
|
44fc96c8a9
|
nrf5/bluetooth: Correcting typo in test where s132 API version is settled.
|
2017-04-24 23:14:04 +02:00 |
|
Glenn Ruben Bakke
|
f68fb8499d
|
nrf5/bluetooth: Updating bluetooth le driver to compile with s132 v.2.0.1 stack.
|
2017-04-24 23:05:08 +02:00 |
|
Glenn Ruben Bakke
|
2adad5f2a6
|
nrf5/bluetooth: Add new compiler flag to signal API variants of the s132 bluetooth le stack. The version is derived from the major number of the stack name.
|
2017-04-24 23:03:54 +02:00 |
|
Glenn Ruben Bakke
|
9abd38a3f2
|
nrf5/bluetooth: Remove hardcoded softdevice version as this now comes as parameter from board makefile.
|
2017-04-24 22:29:48 +02:00 |
|
Glenn Ruben Bakke
|
3c8323aff4
|
nrf5/boards: Updating makefiles using bluetooth stack to use updated linker script file names.
|
2017-04-24 22:28:08 +02:00 |
|
Glenn Ruben Bakke
|
f4fd45bef3
|
nrf5/boards: Renaming bluetooth stack linker scripts to reflect version of the stack.
|
2017-04-24 22:22:17 +02:00 |
|
Glenn Ruben Bakke
|
bccfc7262d
|
nrf5/boards: adding some spaces in s132 makefile for pca10040.
|
2017-04-24 22:18:46 +02:00 |
|
Glenn Ruben Bakke
|
582db669b6
|
nrf5/boards: Renaming linker script for nrf52832 using bluetooth stack such that it also holds the version number of the stack. Updating linkerscript using the target linker script.
|
2017-04-24 22:02:41 +02:00 |
|
Glenn Ruben Bakke
|
39d3d7bb28
|
nrf5/bluetooth: Add support for downloading s132_2.0.1 bluetooth stack.
|
2017-04-24 21:56:28 +02:00 |
|
Glenn Ruben Bakke
|
3f96532952
|
nrf5/bluetooth: Switch over to downloaded bluetooth stacks from nordicsemi.com instead of getting them through the SDK's. This will facilitate download of s132 v2.0.0 later.
|
2017-04-24 21:46:28 +02:00 |
|
Glenn Ruben Bakke
|
ca43f42b78
|
nrf5/bluetooth: Fixing bug found when testing microbit. Newly introduced advertisment data pointer was not cleared on nrf51 targets. Explicit set to NULL as no additional advertisment data is set. Raises a question on why the nrf51 static variable was not zero initialized. To be checked up.
|
2017-04-23 18:35:31 +02:00 |
|
Glenn Ruben Bakke
|
f6e612f7d7
|
nrf5: Removing SDK_ROOT parameter to Makefile. Bluetooth stacks should be downloaded using the download_ble_stack.sh. The script should be run inside the bluetooth folder to work properly.
|
2017-04-21 18:58:57 +02:00 |
|
Glenn Ruben Bakke
|
a76ff755e3
|
nrf5/bluetooth: Adding back SOFTDEV_HEX as flash tools in main Makefile uses this to locate hex file.
|
2017-04-21 18:55:59 +02:00 |
|
Glenn Ruben Bakke
|
10b7f3ef83
|
nrf5/bluetooth: Including bluetooth stack version in folder name after download to be able to detect if stack has been updated.
|
2017-04-21 18:46:32 +02:00 |
|
Glenn Ruben Bakke
|
7501ecec8e
|
nrf5/bluetooth: Updating Bluetooth LE stack download script.
|
2017-04-21 18:23:48 +02:00 |
|
Glenn Ruben Bakke
|
f6f8097f77
|
nrf5/bluetooth: Adding bash script to automate download of bluetooth le stacks
|
2017-04-20 23:54:28 +02:00 |
|
Glenn Ruben Bakke
|
aa32dcd0fd
|
nrf5/examples: Adding example to show how to use current PWM module to control servo motors.
|
2017-04-18 21:03:14 +02:00 |
|
Glenn Ruben Bakke
|
071e551b79
|
nrf5/modules/machine: Updating PWM module with two new kwargs parameters. One for setting pulse with more fine grained. This value should not exceed the period value. Also, adding support for setting PWM mode, whether it is LOW duty cycle or HIGH duty cycle. By default, high to low is set (this could be changed).
|
2017-04-18 21:00:52 +02:00 |
|
Glenn Ruben Bakke
|
d0d350da16
|
nrf5/hal/pwm: Updating PWM implementation to support manually set duty cycle period. Pulse width has precidence over duty cycle percentage. Also adding support for the two configurable modes, high to low, and low to high, duty cycles.
|
2017-04-18 20:56:19 +02:00 |
|
Glenn Ruben Bakke
|
4d56f2a76d
|
nrf5/hal/pwm: Adding more configuration options to the PWM peripheral wrapper. Possibility to set pulse with manually, and also mode. The mode indicates whether duty cycle is low and then goes high, or if it is high and then go low. Added new type to describe the two modes.
|
2017-04-18 20:53:55 +02:00 |
|
Glenn Ruben Bakke
|
2d7f39855b
|
nrf5: Adding hal_gpio.c to Makefile's source list.
|
2017-04-11 13:59:54 +02:00 |
|
Glenn Ruben Bakke
|
1e79bdf0b4
|
nrf5/modules/machine: Updating Pin module to register a IRQ callback upon GPIO polarity change events.
|
2017-04-11 13:58:58 +02:00 |
|
Glenn Ruben Bakke
|
81aaf6e906
|
nrf5/hal/gpio: Adding initial gpiote implementation to handle IRQ on polarity change on a gpio.
|
2017-04-11 13:57:44 +02:00 |
|
Glenn Ruben Bakke
|
fb53bdf07c
|
nrf5: Moving initialization of pin til after uart has been initialized for debugging purposes. This will make it possible to use uart to print out debug data when adding gpio irq handlers.
|
2017-04-11 13:55:01 +02:00 |
|
Glenn Ruben Bakke
|
adf316afaa
|
nrf5/hal/gpio: Adding some new structures and functions to register irq channels to gpio's using GPIOTE peripheral
|
2017-04-11 13:53:37 +02:00 |
|
Glenn Ruben Bakke
|
f8c0a51f5e
|
nrf5/hal/gpio: Adding missing include.
|
2017-04-09 23:47:44 +02:00 |
|
Glenn Ruben Bakke
|
c7c2285ab9
|
nrf5/modules/machine: Style fix in pin object, indention.
|
2017-04-09 23:19:26 +02:00 |
|
Glenn Ruben Bakke
|
320b9ecde7
|
nrf5/modules/machine: Adding placeholder for irq method to pin object class.
|
2017-04-09 23:18:00 +02:00 |
|
Glenn Ruben Bakke
|
2c90d94dc7
|
nrf5/modules/machine: Adding pin irq type and basic functions and structures.
|
2017-04-09 23:16:07 +02:00 |
|
Glenn Ruben Bakke
|
a93d462dfd
|
nrf5/hal/gpio: Reintroducing gpio polarity toggle event to be able to reference the short form of adding high_to_low and low_to_high together.
|
2017-04-09 23:02:37 +02:00 |
|
Glenn Ruben Bakke
|
435bc5a3d4
|
nrf5/hal/gpio: Updating hal_gpio.h with some tab-fixes in order to make the file a bit consistent in style.
|
2017-04-09 21:56:28 +02:00 |
|
Glenn Ruben Bakke
|
8c45aca8d2
|
nrf5/hal/gpio: Removing toggle event from the enumeration as that will be a combination of the rising and falling together.
|
2017-04-09 21:54:09 +02:00 |
|
Glenn Ruben Bakke
|
6446105689
|
nrf5/modules/machine: Removing toggle event trigger as that will be a combination of the rising and falling together.
|
2017-04-09 21:52:57 +02:00 |
|
Glenn Ruben Bakke
|
32083a9443
|
nrf5/modules/machine: Adding new constants to pin object for polarity change triggers using the enumerated values in hal_gpio.h.
|
2017-04-09 21:50:11 +02:00 |
|
Glenn Ruben Bakke
|
07edf4f26d
|
nrf5/hal/gpio: Adding new enumeration for input polarity change events.
|
2017-04-09 21:49:02 +02:00 |
|
Glenn Ruben Bakke
|
3b15d33809
|
nrf5/hal: Moving hal_gpio functions, types and defines from mphalport.h to a new hal_gpio.h.
|
2017-04-09 21:39:15 +02:00 |
|
Glenn Ruben Bakke
|
35f9c8f37f
|
nrf5: Removing leftover reference to deleted display module.
|
2017-04-09 18:55:53 +02:00 |
|
Glenn Ruben Bakke
|
d7cfae3639
|
nrf5/usocket: Removing network modules related to Bluetooth 6lowpan implementation as it depends on SDK libraries for now. Will be moved to seperate working branch.
|
2017-04-09 18:53:58 +02:00 |
|
Glenn Ruben Bakke
|
4dd86178bc
|
nrf5: Removing custom display, framebuffer and graphics module to make branch contain core components instead of playground modules.
|
2017-04-09 18:25:15 +02:00 |
|
Glenn Ruben Bakke
|
a026d3475f
|
nrf5/modules/usocket: Updating import of netutils.h after upmerge with upstream master.
|
2017-04-09 17:48:48 +02:00 |
|
Glenn Ruben Bakke
|
5d06aa3260
|
nrf5/bluetooth: Add some comment on the destination of the eddystone short-url.
|
2017-04-09 15:52:21 +02:00 |
|
Glenn Ruben Bakke
|
b92b55bdd0
|
nrf5/bluetooth: Updating Eddystone URL to point to https://goo.gl/x46FES which hosts the MicroPython WebBluetooth application which will be able to connect to the Bluetooth LE UART service of the device and create the REPL.
|
2017-04-09 15:36:34 +02:00 |
|
Glenn Ruben Bakke
|
a4173c467f
|
nrf5/bluetooth: Adding webbluetooth REPL template. Alternating advertisment of eddystone URL and UART BLE service every 500 ms. Adding new config parameter to bluetooth_conf.h to enable webbluetooth repl. Has to be configured in combination with BLE_NUS. Eddystone URL not pointing to a valid WebBluetooth application at the moment, but rather to micropython.org as a placeholder for now.
|
2017-04-04 22:31:17 +02:00 |
|
Glenn Ruben Bakke
|
587c6277c4
|
nrf5/modules/ubluepy: Adding method Peripheral object to stop any ongoing advertisment. Adding compile guard to only include advertise and advertise_stop if peripheral role is compiled in.
|
2017-04-04 21:25:28 +02:00 |
|
Glenn Ruben Bakke
|
31feea4511
|
nrf5/bluetooth: Adding function to stop advertisment if onging
|
2017-04-04 21:22:49 +02:00 |
|
Glenn Ruben Bakke
|
46c21ff6ba
|
nrf5/modules/ubluepy: Adding support for starting advertisment from BLE UART REPL, by delaying registration of gatt/gatts and gattc handlers until needed in advertise or connect. If non connectable advertisment is selected, handlers in peripheral new is not anymore overriding the other peripheral instances which has set the callbacks.
|
2017-04-04 20:24:43 +02:00 |
|
Glenn Ruben Bakke
|
0559be4ffc
|
nrf5/bluetooth: Adding possibility to configure whether advertisment should be connectable or not.
|
2017-04-02 18:34:56 +02:00 |
|
Glenn Ruben Bakke
|
ce6221ef61
|
nrf5/bluetooth: Removing legacy advertise function in the bluetooth driver, which only did a hardcoded eddystone beacone advertisment.
|
2017-04-02 16:55:47 +02:00 |
|
Glenn Ruben Bakke
|
e5fc082366
|
nrf5/help: Updating ble module help description to also include the address method.
|
2017-04-02 16:44:37 +02:00 |
|
Glenn Ruben Bakke
|
6fcb0a40e9
|
nrf5/bluetooth: Renaming the ble module method address_print() to address(), as it will now return a string of the resolved local address. Updating the function to create a string out the local address and return this.
|
2017-04-02 16:43:16 +02:00 |
|
Glenn Ruben Bakke
|
7e52da7ccb
|
nrf5/bluetooth: Update ble_drv_address_get to new api which pass in a address struct to fill by reference. Updating implementation to copy the address data. Also ensuring that the bluetooth stack has been enabled before fetching the address from the bluetooth stack.
|
2017-04-02 16:41:08 +02:00 |
|
Glenn Ruben Bakke
|
1402574b7d
|
nrf5/bluetooth: Adding new structure which can hold local address. Updating api prototype for ble_drv_address_get with a address structure by reference.
|
2017-04-02 16:39:14 +02:00 |
|
Glenn Ruben Bakke
|
e3773e899f
|
nrf5/bluetooth: Updating help text for ble module to also list up enabled() function which queries the bluetooth stack on whether it is enabled or not.
|
2017-04-02 16:17:39 +02:00 |
|
Glenn Ruben Bakke
|
c7f0069aac
|
nrf5/bluetooth: Removing advertise from ble module. Removing help text as well.
|
2017-04-02 16:14:48 +02:00 |
|
Glenn Ruben Bakke
|
c8097eb470
|
nrf5/examples: Adding python eddystone example using ubluepy api.
|
2017-04-02 15:51:00 +02:00 |
|
Glenn Ruben Bakke
|
f7fbf55a45
|
nrf5/modules/ubluepy: Open up Peripheral advertise method to pass custom data to the bluetooth driver. Allowing method to allow kwargs only if no args is set. To support setting data kwarg only.
|
2017-04-02 15:50:07 +02:00 |
|
Glenn Ruben Bakke
|
58238a43b3
|
nrf5/modules/ubluepy: Adding new members to the ublupy advertisment parameters, to hold custom data payload if set.
|
2017-04-02 15:48:32 +02:00 |
|
Glenn Ruben Bakke
|
52c07e7cb2
|
nrf5/bluetooth: Cleaning up stack enable function, to not set device name twice. Also, adding support for setting custom advertisment data.
|
2017-04-02 15:45:02 +02:00 |
|
Glenn Ruben Bakke
|
5f645b6c8e
|
nrf5/modules/ubluepy: Adding compile guard for UBLUEPY_CENTRAL around the char_read() call to ble_drv_attr_c_read().
|
2017-04-02 00:31:28 +02:00 |
|
Glenn Ruben Bakke
|
84e5b828ea
|
nrf5/bluetooth: Moving central code inside central bluetooth stack defines to make peripheral only code compile again.
|
2017-04-02 00:30:16 +02:00 |
|
Glenn Ruben Bakke
|
460f6dee50
|
nrf5/examples: Updating ubluepy scan example to use constant value from ubluepy instead of hardcoded value.
|
2017-04-01 22:50:37 +02:00 |
|
Glenn Ruben Bakke
|
9568e07159
|
nrf5/examples: Adding example on how to use the ubluepy Scanner object in order to scan for a device name and find the address of the device. This can subsequently be used to perform a Central role connect() using the Peripheral object.
|
2017-04-01 22:45:11 +02:00 |
|
Glenn Ruben Bakke
|
33b1028b50
|
nrf5/modules/ubluepy: Turn all attributes (addr, addr_type and rssi) to method calls instead of using common .attr callback. Adding getScanData implementation, which parses the advertisment data and returns a list of tuples containing (ad_type, desc, value). Description is generated by peeking into the ad_types local dicts map table, and do a reverse lookup on the value to find the QSTR.
|
2017-04-01 22:43:54 +02:00 |
|