circuitpython

bluetooth

nrf5/bluetooth: Updating Bluetooth LE stack download script to allow to be invoked from any parent folder. No need to change directory to bluetooth/ in order to get the correct download target folder position. Using the script location to determine the target folder.

2017-04-26 19:18:27 +02:00

boards

nrf5/boards: Removing PWM config set to 0 from pca10001 board. Config will later be re-introduced as SOFT_PWM variant.

2017-05-08 21:11:21 +02:00

device

nrf51: Removing stack section from startup file as it got added to the final hex file. Thanks dhylands for helping out.

2017-03-04 01:24:10 +01:00

drivers

nrf5/drivers/pwm: Updating soft PWM driver to only be included if SOFT_PWM config is set.

2017-05-08 21:21:57 +02:00

examples

nrf5/examples: Adding example to show how to use current PWM module to control servo motors.

2017-04-18 21:03:14 +02:00

freeze

nrf5: Renaming python modules folder to freeze to give the folder its right meaning. The scripts put into this folder will be frozen.

2017-02-04 23:46:29 +01:00

hal

nrf5/hal/gpio: Add function to clear output register using a pin mask.

2017-05-08 21:20:08 +02:00

modules

nrf5/modules/music: Backing up progress in music module.

2017-05-08 21:22:53 +02:00

.gitignore

ignore default build folders

2016-11-16 23:40:38 +01:00

bluetooth_conf.h

nrf5/usocket: Removing network modules related to Bluetooth 6lowpan implementation as it depends on SDK libraries for now. Will be moved to seperate working branch.

2017-04-09 18:53:58 +02:00

builtin_open.c

nrf5: Updating port with new content. SPI, SDcard (trough sdcard.py), Pin, and machine module. Also adding some basic modules depending on SDK and bluetooth stack from nordic semiconductor. NUS is module copied from original port by tralamazza, and new basic module for 6lowpan over BLE which can be used by modnetwork and modusocket. Basic BLE module to enable bluetooth stack and start a eddystone advertisment is kept, and still works without SDK, even if in the SDK folder (its placed there as it needs bluetooth stack from an SDK).

2016-12-13 20:27:26 +01:00

fatfs_port.c

nrf5: Aligning code after upmerge with master. Mostly FAT FS related updates. Not tested after merge.

2017-02-07 23:30:54 +01:00

font_petme128_8x8.h

nrf5/lcd: Changing framebuffer to use petme128 8x8 font. This is vertical font. Code modified to flip and mirror the font when rendering a character. Adding copy of the font from stmhal.

2016-12-29 15:35:24 +01:00

gccollect.c

Base support for nrf51 and nrf52 base without depending on SDK. SoftDevice usage optional.

2016-11-16 21:38:25 +01:00

gccollect.h

nrf5: Updating port with new content. SPI, SDcard (trough sdcard.py), Pin, and machine module. Also adding some basic modules depending on SDK and bluetooth stack from nordic semiconductor. NUS is module copied from original port by tralamazza, and new basic module for 6lowpan over BLE which can be used by modnetwork and modusocket. Basic BLE module to enable bluetooth stack and start a eddystone advertisment is kept, and still works without SDK, even if in the SDK folder (its placed there as it needs bluetooth stack from an SDK).

2016-12-13 20:27:26 +01:00

help.c

nrf5: Syncing code after upmerge with master.

2017-01-22 22:18:44 +01:00

main.c

nrf5/pwm: Updating config name of PWM to hardware PWM to prepare for introduction of soft variant.

2017-05-08 21:10:18 +02:00

Makefile

nrf5: Removing SDK_ROOT parameter to Makefile. Bluetooth stacks should be downloaded using the download_ble_stack.sh. The script should be run inside the bluetooth folder to work properly.

2017-04-21 18:58:57 +02:00

mpconfigport.h

nrf5: Adding new configuration called MICROPY_PY_MACHINE_SOFT_PWM to mpconfigport.h. This config will enable software defined PWM using timer instead of using dedicated PWM hardware. Aimed to be used in nrf51 targets.

2017-05-08 21:14:34 +02:00

mphalport.c

nrf5: Force implementation of tx_str_cooked function if BLE NUS enabled.

2017-02-28 23:18:31 +01:00

mphalport.h

nrf5/hal: Moving hal_gpio functions, types and defines from mphalport.h to a new hal_gpio.h.

2017-04-09 21:39:15 +02:00

nrf51_af.csv

nrf5: Updating nrf51_af.csv to reflect pins having ADC on the chip.

2017-01-11 20:13:59 +01:00

nrf52_af.csv

nrf5/pin: Adding more pins to nrf52_af.csv file for nrf52840. Port '1' will be prefixed 'B'.

2017-01-08 16:10:47 +01:00

pin_defs_nrf5.h

nrf5/pin: Adding PORT_B to Pin port enum to reflect gpio port 1 on nrf52840.

2017-01-08 16:08:47 +01:00

pin_named_pins.c

nrf5: Updating port with new content. SPI, SDcard (trough sdcard.py), Pin, and machine module. Also adding some basic modules depending on SDK and bluetooth stack from nordic semiconductor. NUS is module copied from original port by tralamazza, and new basic module for 6lowpan over BLE which can be used by modnetwork and modusocket. Basic BLE module to enable bluetooth stack and start a eddystone advertisment is kept, and still works without SDK, even if in the SDK folder (its placed there as it needs bluetooth stack from an SDK).

2016-12-13 20:27:26 +01:00

qstrdefsport.h

Base support for nrf51 and nrf52 base without depending on SDK. SoftDevice usage optional.

2016-11-16 21:38:25 +01:00