Neradoc
3acb0d48bc
free RX and TX on QTPY-ESP32S2 in non debug builds
2022-02-18 01:13:37 +01:00
Dan Halbert
fe6e03f504
Merge pull request #6013 from tannewt/esp_ble_gatt_client
...
Add S3 GATT client support
2022-02-17 16:02:11 -05:00
Neradoc
aedae120c7
use espressif assigned PID for Hiibot IOTS2
2022-02-17 15:06:38 +01:00
Neradoc
139c2710aa
rebase, fix call to common_hal_busio_spi_construct
2022-02-17 14:41:47 +01:00
Neradoc
b1a55e3904
add board.DISPLAY and init to hiibot itos2 (copying from TTGO)
2022-02-17 14:41:47 +01:00
Neradoc
f9f711ab96
now it compiles, so there is that
2022-02-17 14:41:47 +01:00
Neradoc
727dd41a8c
add hiibot itos2, original commit before checking
2022-02-17 14:41:47 +01:00
Scott Shawcroft
ab037bd216
Merge pull request #6046 from prplz/espressif-enter-repl-delayed-fix
...
Fix press any key responding slowly on espressif
2022-02-16 21:58:29 -08:00
Michael Himing
bfb897a0b8
Fix press any key responding slowly on espressif
2022-02-17 12:57:27 +11:00
Kattni Rembor
c9213481b3
Update pin name to match TFT pins.
2022-02-16 16:32:08 -05:00
Melissa LeBlanc-Williams
726bf02ea8
Add PortalBase and Fake Requests and update Frozen Libs on Portal boards
2022-02-16 10:12:54 -08:00
Scott Shawcroft
11647f56e4
Merge pull request #6034 from tannewt/i2c_power
...
Tweak I2C and TFT power pin defaults
2022-02-15 18:00:34 -08:00
Scott Shawcroft
65af10cd23
Tweak I2C and TFT power pin defaults
...
This should set the power to on by default without preventing the
user code from repeatedly using it.
Fixes #5903
2022-02-14 16:19:56 -08:00
Michael Himing
11bbe48ede
Espressif: add partitions-4MB-no-uf2
2022-02-15 08:42:15 +11:00
Michael Himing
ca5095c94b
Add AI thinker esp32c3s 2M
2022-02-15 07:00:38 +11:00
Scott Shawcroft
d4c2ffea27
Merge pull request #6022 from anecdata/more_ap_connections
...
wifi.radio.start_ap() new kwarg: max_connections
2022-02-14 10:08:39 -08:00
anecdata
5742a12497
input validation consistent with esp-idf is moved to common-hal
2022-02-13 22:14:45 -06:00
anecdata
b559a0ee2a
new kwarg: wifi.radio.start_ap(max_connections=)
2022-02-12 13:34:57 -06:00
anecdata
e4837a4a61
ESP32-S3 increase max sockets - issue #5915 (partial)
2022-02-11 16:00:45 -06:00
Scott Shawcroft
8958e7ef08
Add S3 GATT client support
...
This allows you to connect to GATT services on the other device.
It also adds connection initiation (GAP central).
More progress on #5926
2022-02-10 11:31:57 -08:00
Scott Shawcroft
c9b494b79f
Merge pull request #6006 from DavePutz/issue_5980
...
Correct ping timeout for espressif
2022-02-10 10:18:14 -08:00
root
6563f71545
Correct ping timeout for espressif
2022-02-09 15:58:25 -06:00
Scott Shawcroft
2bf5a1ee45
Merge pull request #5998 from anecdata/ESP32-S2-DevKitC-1-N4R2
...
Espressif ESP32-S2 DevKitC-1-N4R2 board
2022-02-09 11:03:14 -08:00
Dan Halbert
da035fe958
Merge pull request #5990 from sgauche/stm_spi_3wire
...
Add support for half-duplex SPI to CPy
2022-02-09 13:11:37 -05:00
anecdata
f87c027e00
Espressif ESP32-S2 DevKitC-1-N4R2 board
2022-02-08 22:14:01 -06:00
Scott Gauche
a8d8651873
Canonical C style for half_duplex = true/false
2022-02-08 23:13:22 -05:00
Scott Gauche
309f4fb2b9
add half_duplex false param to spi construct function call in some board files
2022-02-08 22:59:26 -05:00
Scott Gauche
89ad767b8f
add half_duplex to spi constructs in other ports but raise not implemented errors
2022-02-08 22:25:23 -05:00
anecdata
8e625728d6
LED_INVERTED
2022-02-08 20:34:37 -06:00
Michael Himing
a639004c89
unexpectedmaker_tinys3: Fix D43, D44
2022-02-08 16:13:56 +11:00
Michael Himing
15914edd56
unexpectedmaker_feathers3: Fix A12
2022-02-08 16:13:56 +11:00
Michael Himing
a2fd1e6eb3
unexpectedmaker_pros3: Fix D43, D44
2022-02-08 16:13:56 +11:00
arturo182
6623fe0a53
esp32s3_devkitm: Add GPIO40
2022-02-03 04:06:08 +01:00
Bryan Walsh
2f1c42b15f
added GPIO40 pin to esp32s3 devkit boards
2022-02-02 20:16:39 -05:00
Dan Halbert
a04cd6444b
Merge pull request #5966 from Neradoc/add-alias-stemma-i2c
...
Add alias board.STEMMA_I2C for all boards with qwiic/stemma/QT
2022-02-02 11:08:13 -05:00
Dan Halbert
384cbdcda1
Merge pull request #5962 from Neradoc/add-more-stemma-i2c
...
Add board.STEMMA_I2C on ESP QTPYs
2022-02-02 10:50:19 -05:00
Neradoc
b2c8fd3938
add board.STEMMA_I2C alias to some boards
2022-02-02 01:18:46 +01:00
Dan Halbert
5435a40c54
Merge pull request #5959 from andypiper/patch-1
...
Fix typos
2022-02-01 18:27:31 -05:00
arturo182
2a87a80f69
espressif: Add ESP32-S3-DevKitM-1 board support
2022-02-02 00:18:04 +01:00
Neradoc
93f612eea2
add board.STEMMA_I2C on ESP QT PYs
2022-02-01 20:15:24 +01:00
Scott Shawcroft
2964e966b1
Merge pull request #5958 from dhalbert/i2c-common-hal-write-read
...
I2c common hal write read
2022-02-01 11:08:50 -08:00
Andy Piper
4096bb28ab
Fix typos
...
Some typo corrections and cleanup to the ESP32 doc
2022-02-01 18:53:11 +00:00
Dan Halbert
cc410ad6a3
common-hal I2C combined write_read
2022-01-31 22:03:30 -05:00
Dan Halbert
17956a0204
Merge pull request #5957 from tannewt/esp_ble_forever_scan
...
Fix BLE scanning forever on ESP32-S3
2022-01-31 20:55:48 -05:00
Dan Halbert
d5740c8ad9
Merge remote-tracking branch 'adafruit/main' into i2c-common-hal-write-read
2022-01-31 18:51:32 -05:00
Scott Shawcroft
db7e72b43d
Fix BLE scanning forever on ESP32-S3
2022-01-31 15:45:43 -08:00
Dan Halbert
83e6e6690a
wip; works on espressif
2022-01-29 22:44:27 -05:00
Seon Rozenblum
1277852501
Added initial support for my new TinyS3, FeatherS3 and ProS3 ESP32-S3 development boards
2022-01-29 14:04:57 +11:00
Scott Shawcroft
019aecaa20
Support BLE advertising on ESP
...
Services and characteristics still won't work.
Progress on #5926
2022-01-27 17:40:37 -08:00
Dan Halbert
fff68c9f86
Merge pull request #5927 from tannewt/esp_ble_scan
...
Add BLE scanning for S3 and C3.
2022-01-27 13:05:24 -05:00
Scott Shawcroft
d9966c1724
Add TODOs and -Os for RISC-V
2022-01-26 17:07:20 -08:00
Scott Shawcroft
e409ff75cd
Turn off BLE HCI on ESP32-S2
2022-01-26 09:46:29 -08:00
microDev
fa2d156d14
return default cpu frequency on espressif
2022-01-26 12:32:48 +05:30
Scott Shawcroft
b2e1dbd2df
Implement name and address get/set
2022-01-25 19:17:26 -08:00
Scott Shawcroft
5a6f456dbb
Add BLE scanning for S3 and C3.
...
Everything else should raise NotImplementedError.
First step in #5926
2022-01-25 16:28:46 -08:00
Scott Shawcroft
4a3c636b6b
Merge pull request #5874 from dkulinski/epaper_two_byte_length
...
Update EPaperDisplay to allow for two byte sequence length
2022-01-25 11:13:36 -08:00
Dan Kulinski
19f9163892
Bringing branch up to date with current main
2022-01-25 11:02:00 -07:00
microDev
324ff9c30d
bump idf to latest commit on v4.4 branch
2022-01-25 18:01:09 +05:30
Dan Kulinski
60801066b2
Fix magtag, openbook for EPaperDisplay constructor
2022-01-24 12:34:01 -07:00
root
367a1d53c0
Fixes for pulsein on ESP32S3
2022-01-23 13:14:34 -06:00
Michael Himing
4d78e3401c
Fix esp32s3 devkitc uart naming and add board.UART
2022-01-22 15:25:33 +11:00
microDev
3970aa5a5e
fix build failure on two boards
2022-01-21 10:11:33 +05:30
MicroDev
dab35f7c72
Merge pull request #5880 from jepler/espressif-serial-trick-uf2
...
Request ROM bootloader when resetting using the 'serial trick'
2022-01-21 09:56:12 +05:30
Jeff Epler
ea30a8ac04
Reboot into the ROM bootloader from 1200 baud
...
Per Scott, the purpose of this trick is to make the board programmable from Arduino even when CP is installed, so my convenience of escaping into UF2 is not going to work out.
2022-01-20 18:50:50 -06:00
Scott Shawcroft
35175715f9
Check target defined
2022-01-20 14:11:33 -08:00
Scott Shawcroft
d99847b410
Refactor pin reset on ESP
...
This makes it easier to blanket never reset flash and USB pins. It
also allows us to set a custom state after reset. The first case
is for the double tap reset that needs to be pulled low.
Fixes #5893
2022-01-20 12:40:41 -08:00
Scott Shawcroft
13db65566d
ESP NeoPixel fixes
...
This tweaks the RMT timing to better match the 1/3 and 2/3 of 800khz
guideline for timing. It also ensures a delay of 300 microseconds
with the line low before reset.
Pin reset is now changed to the IDF default which pulls the pin up
rather than CircuitPython's old behavior of floating the pin.
Fixes #5679
2022-01-19 16:29:07 -08:00
Dan Halbert
8bae6af12a
Merge pull request #5888 from tannewt/esp_tick_core
...
Ensure supervisor_tick is run on the same core as CP
2022-01-19 19:26:50 -05:00
Kattni Rembor
880d43a4f7
Fix pin typo.
2022-01-19 17:04:30 -05:00
Scott Shawcroft
42fbebe62a
Merge pull request #5832 from ladyada/main
...
ESP32S2 camera board draft
2022-01-19 12:04:13 -08:00
Scott Shawcroft
78942112c7
Ensure supervisor_tick is run on the same core as CP
2022-01-19 11:36:40 -08:00
lady ada
f13ea93fe6
fix A5 pin name
2022-01-19 14:22:01 -05:00
lady ada
6d7472357d
newline
2022-01-18 20:46:09 -05:00
Scott Shawcroft
7ee5c01cf8
Add Espressif C3 dev board
2022-01-18 17:39:52 -08:00
lady ada
09cf95a51c
no psram :(
2022-01-18 20:14:17 -05:00
lady ada
de45a20b08
EOF
2022-01-18 20:14:17 -05:00
lady ada
71c792d608
try initial esp32s3 qtpy def
2022-01-18 20:14:17 -05:00
lady ada
d4dab79234
add buttonpin
2022-01-18 20:14:17 -05:00
lady ada
c1cee63c5a
fix tuplecompile
2022-01-18 20:14:17 -05:00
lady ada
1d44bf1c0c
add camera data port
2022-01-18 20:14:17 -05:00
lady ada
3381ac149e
fix camera display io to use default spi bus
2022-01-18 20:14:16 -05:00
lady ada
13b319c430
try rotation 0
2022-01-18 20:14:16 -05:00
lady ada
e9f0c1796e
oof fix i2c lines!
2022-01-18 20:14:16 -05:00
lady ada
4400124efe
snappysnap
2022-01-18 20:14:16 -05:00
lady ada
8b26f594c9
try not resetting i2c power
2022-01-18 20:14:16 -05:00
lady ada
647b894e7b
?? some include needed
2022-01-18 20:14:16 -05:00
lady ada
9c933558b5
enable I2C by default
2022-01-18 20:14:15 -05:00
Jeff Epler
872beeccfe
Merge remote-tracking branch 'origin/main' into espressif-serial-trick-uf2
2022-01-18 19:07:05 -06:00
Scott Shawcroft
c839d9b3cc
Fix S2 builds by not turning on USB with wifi
2022-01-18 15:50:32 -08:00
Scott Shawcroft
679f4b30ba
Tweak heap sizes for different targets
2022-01-18 15:23:19 -08:00
Jeff Epler
49b8579bcd
Request UF2 bootloader when resetting using the 'serial trick'
2022-01-17 17:14:31 -06:00
Dan Halbert
3453ced296
Merge pull request #5860 from tannewt/s3_core_1
...
Switch CP to core 1 on S3
2022-01-17 16:10:05 -05:00
Jeff Epler
895a8a9e72
Merge pull request #5866 from dhalbert/espressif-open-drain
...
fix espressif DigitalInOut open-drain
2022-01-17 12:51:31 -06:00
Dan Halbert
11848b1826
use GPIO_MODE_ instead of GPIO_MODE_DEF
2022-01-15 23:05:33 -05:00
Dan Halbert
c70c8a9390
fix espressif open-drain
2022-01-15 19:54:31 -05:00
Scott Shawcroft
f6cf15de43
Switch CP to core 1 on S3
2022-01-14 12:22:38 -08:00
Scott Shawcroft
993e51e5cc
Fix USB when enabling wifi
2022-01-14 11:52:14 -08:00
Scott Shawcroft
7af7cd418c
Merge pull request #5853 from tannewt/s3_config_rework
...
Split out target specific configs.
2022-01-14 10:25:50 -08:00
Scott Shawcroft
86e7247d11
Merge pull request #5854 from jepler/issue-5680
...
patch esp-idf for i2c crash
2022-01-14 09:37:23 -08:00
Jeff Epler
c87d9c947b
patch esp-idf for i2c crash
...
In theory, this Closes : #5680 -- I didn't test it on HW yet.
2022-01-14 08:53:24 -06:00
Scott Shawcroft
869cf5eba5
Run USB on the same core as CP
2022-01-13 15:55:37 -08:00
Scott Shawcroft
39639ecd17
Rework configs to take target into account
...
New script will filter settings to different tiers.
2022-01-13 15:55:37 -08:00
Scott Shawcroft
2233026556
Merge pull request #5848 from prplz/esp32s3-devkits
...
Esp32s3 devkits
2022-01-13 14:02:44 -08:00
Dan Halbert
59275c7225
Merge pull request #5846 from jepler/feather-esp32s2-tft-spi
...
feather esp32s2 tft: fix sharing of main display bus
2022-01-12 23:05:42 -05:00
Michael Himing
a878e3377c
Rename espressif_esp32s3_devkitc_1 to devkitc_1_n8r2
2022-01-13 13:24:06 +11:00
Michael Himing
212eedc42f
Rename espressif_esp32s3_devkitc_1_nopsram to devkitc_1_n8
2022-01-13 13:24:06 +11:00
Michael Himing
7575cacdc5
Add espressif_esp32s3_devkitc_1_n8r8
2022-01-13 13:24:06 +11:00
Jeff Epler
10c3836bc0
feather esp32s2 tft: fix sharing of main display bus
2022-01-12 14:35:00 -06:00
Kattni Rembor
fb96c09118
Add button pin to Feathers, fix pin order on QT Py.
2022-01-12 13:54:56 -05:00
Kattni Rembor
4efbfca2b0
Fix typo, pin order.
2022-01-10 14:45:54 -05:00
Dan Halbert
d166834e09
Merge pull request #5803 from dhalbert/countio-enhancements
...
countio: add selectable rise and fall detection, pulls
2021-12-31 23:45:59 -05:00
Dan Halbert
9d2a32d07e
countio: add selectable rise and fall detection, pulls
2021-12-31 16:34:58 -05:00
microDev
4daa7b5180
update espressif port
...
- enable rgbmatrix for all esp soc
- bump idf to latest commit on v4.4 branch
2021-12-30 19:23:41 +05:30
Dan Halbert
8aafc734a4
Merge pull request #5789 from adafruit/7.1.x
...
Merge latest changes from 7.1.x
2021-12-28 18:12:29 -05:00
Jeff Epler
1d13c4ccd1
Centralize LONGINT_IMPL handling
...
This closes #5782
2021-12-27 10:21:47 -06:00
Dan Halbert
cf70a9ca61
Turn on I2C power for each VM, instead of just after hard reset
2021-12-24 16:27:17 -05:00
Dan Halbert
889b25d792
put I2C_POWER_INVERTED alias before D7, for prettypins
2021-12-24 11:49:58 -05:00
Dan Halbert
cf349af35e
turn on I2C power after reset
2021-12-24 11:45:07 -05:00
Scott Shawcroft
605753cd7d
Merge pull request #5771 from hathach/s3-familyid
...
use family id for s2 and s3 depending on IDF_TARGET
2021-12-23 11:08:41 -08:00
Jeff Epler
900ec91fa6
Merge pull request #5761 from adafruit/7.1.x
...
Bring 7.1.x changes into main - cascadetoml undo + alarm fixes
2021-12-23 06:30:05 -07:00
hathach
53869d71fd
use family id for s2 and s3 depending on IDF_TARGET
2021-12-23 14:53:00 +07:00
Dan Halbert
3bb9a4439d
Fix recording of wake_alarm
2021-12-21 21:48:36 -05:00
Scott Shawcroft
1ec3e023d7
Merge pull request #5744 from jepler/update-protomatter
...
Update protomatter & re-enable rgbmatrix on esp32s2
2021-12-20 12:34:02 -08:00
Jeff Epler
60c2018262
Update protomatter & re-enable rgbmatrix on esp32s2
...
.. not enabled on s3 & c3 as I did not test there.
2021-12-17 12:04:39 -06:00
lady ada
654414e57e
fix colororder
2021-12-17 10:41:06 -05:00
lady ada
26c2acae12
nuudge
2021-12-17 09:47:44 -05:00
lady ada
8e540a1738
fix final qtpys2 and s2tft feather pinouts
2021-12-17 09:47:44 -05:00
lady ada
1c1559f5af
fix colororder
2021-12-17 09:41:44 -05:00
lady ada
c088090319
nuudge
2021-12-17 01:17:35 -05:00
lady ada
12e72ef406
fix final qtpys2 and s2tft feather pinouts
2021-12-17 00:24:19 -05:00
Tim Hawes
54e87d3660
Apply suggestions from code review
...
Co-authored-by: Scott Shawcroft <scott@tannewt.org>
2021-12-14 20:03:44 +00:00
Tim Hawes
c325633f8e
Add methods to ssl.SSLContext for handling self-signed certs
2021-12-14 01:00:50 +00:00
Tim Hawes
ef414bf1bd
Handle server_hostname argument in espressif SSLContext.wrap_socket
2021-12-14 01:00:50 +00:00
Tim Hawes
a3c8760d41
Fix to error checking in espressif SSLSocket
2021-12-13 17:55:43 +00:00
Dan Halbert
3bdf2a5cde
Merge pull request #5691 from jepler/esp32s3-pids
...
Fix PIDs to match official espressif list
2021-12-09 09:08:35 -05:00
Jeff Epler
937e0740f4
Fix PIDs to match official espressif list
...
See the slightly deceptively titled
* https://github.com/espressif/usb-pids/pull/29
2021-12-08 20:27:34 -06:00
Scott Shawcroft
b12d2063d0
Merge remote-tracking branch 'adafruit/7.1.x' into merge_7.1
2021-12-08 10:50:22 -08:00
Scott Shawcroft
e8e5ea7c2f
Merge pull request #5674 from jepler/esp32s3-box-display
...
esp32s3-box: enable display
2021-12-06 14:06:02 -08:00
Jeff Epler
40d947cee3
Merge pull request #5655 from jepler/esp32s3-devkitc
...
Espressif: Add Esp32s3 devkitc board definitions
2021-12-06 12:47:04 -06:00
Jeff Epler
1b5e98e2fa
esp32s3 box: add display
2021-12-06 10:08:44 -06:00
Jeff Epler
b722a2bca1
espressif: pwmout: get rid of not_first_reset special case
2021-12-06 10:08:44 -06:00
Jeff Epler
fae6d47a45
espressif: keep never_reset_pins marked as in use
2021-12-06 10:08:44 -06:00
Dan Halbert
c43e0bd2db
uncrustify fixes
2021-12-06 09:54:15 -05:00
MicroDev
7df172ba19
Merge pull request #5660 from jepler/esp32s3-spi
...
espressif: busio.SPI: Use SPI_DMA_CH_AUTO
2021-12-06 10:24:51 +05:30
Jeff Epler
2ad877a907
Fix VID/PID of esp32-box
2021-12-04 14:58:48 -06:00
Jeff Epler
e2abb0e059
devkitc: update vid/pid in anticipation of allocation from espressif
2021-12-04 10:19:19 -06:00
Jeff Epler
bc7f024545
espressif: Add esp32s3_box
...
This module has 16MB flash, 8MB PSRAM, as well as a display & speakers.
2021-12-04 09:14:57 -06:00
Jeff Epler
1207bfced9
espressif: Use detected size of spiram
2021-12-04 09:14:22 -06:00
Jeff Epler
1a99ce5eb3
espressif: busio.SPI: Use SPI_DMA_CH_AUTO
...
All 3 micros we care about (S2, S3, C3) state in the documentation
that DMA channel can be specified as SPI_DMA_CH_AUTO.
Specifying a specific DMA channel explicitly doesn't _ever_ work on
ESP32-S3, so no SPI bus could be used.
Testing performed: On the ESP32-S3-DevKitC, used neopixel_spi to
turn the onboard neopixel red, green, and blue
2021-12-04 09:12:38 -06:00
Jeff Epler
23e0a25aa2
add nopsram version of the devkit C
2021-12-03 15:20:11 -06:00
Jeff Epler
659babc620
Add the esp32s3 devkitc (psram variant)
2021-12-03 15:09:59 -06:00
Dan Halbert
f594ab2e67
Merge pull request #5615 from microDev1/espressif
...
Update espressif port
2021-12-03 14:55:05 -05:00
microDev
9e286432d2
add esp32s3 documentation in readme
2021-12-03 21:20:55 +05:30
Dan Halbert
57c33059f3
board_deinit() everywhere
2021-11-30 11:00:10 -05:00
Kattni Rembor
c13f1d19f5
Update pins to silk pin first.
2021-11-29 17:56:03 -05:00
lady ada
83de740d1f
kan prezz
2021-11-26 15:13:58 -05:00
lady ada
c56e33e6c2
woops fix SPI for rev A (will change in rev B to be correct)
2021-11-26 15:06:09 -05:00
lady ada
3c007ba094
re-add psram!
2021-11-26 13:50:12 -05:00
microDev
dddc282e34
update default sdkconfig and correct bootloader offset
2021-11-26 22:44:22 +05:30
microDev
554a62955b
Merge branch 'main' into espressif
2021-11-26 22:40:22 +05:30
lady ada
a9060ec383
cr nl
2021-11-26 00:27:54 -05:00
lady ada
0cf629bf99
on hey this proto doesnt have psram :(
2021-11-26 00:15:20 -05:00
lady ada
f06b21e46d
sneaky!
2021-11-25 23:50:33 -05:00
lady ada
a2c8daeb55
:(
2021-11-25 23:45:37 -05:00
lady ada
5e0d562cfe
y not?
2021-11-25 23:18:51 -05:00
microDev
e5c125d153
update espressif makefile formatting
2021-11-24 18:14:54 +05:30
microDev
7ba5513f9a
update espressif port
...
- update esp-idf to v4.4
- add esp32s3 support
- add analogio on esp32c3
- disable rgbmatrix on all espressif soc
Co-authored-by: Scott Shawcroft <scott@adafruit.com>
Co-authored-by: Seon Rozenblum <seon@unexpectedmaker.com>
2021-11-24 18:01:34 +05:30
Timon
a1052d5f73
Initial broadcom port for Raspberry Pi
...
This targets the 64-bit CPU Raspberry Pis. The BCM2711 on the Pi 4
and the BCM2837 on the Pi 3 and Zero 2W. There are 64-bit fixes
outside of the ports directory for it.
There are a couple other cleanups that were incidental:
* Use const mcu_pin_obj_t instead of omitting the const. The structs
themselves are const because they are in ROM.
* Use PTR <-> OBJ conversions in more places. They were found when
mp_obj_t was set to an integer type rather than pointer.
* Optimize submodule checkout because the Pi submodules are heavy
and unnecessary for the vast majority of builds.
Fixes #4314
2021-11-22 14:54:44 -08:00
Scott Shawcroft
3b7d2f1dc3
Merge pull request #5593 from anecdata/ap_extras
...
Set AP MAC address
2021-11-17 10:26:36 -08:00
anecdata
c2a5ca2fa2
INVERT the sense of the I2C_POWER pin (active low)
...
I don't have the board to test, but this was reported and discussed on Discord.
2021-11-16 14:47:53 -06:00
anecdata
193e936807
like #5571 , but for AP
2021-11-16 12:21:50 -06:00
microDev
733bfbc10a
Merge branch 'main' into set_mac
2021-11-15 20:44:30 +05:30
anecdata
31d45a3f32
fix old bug that was masking new bug
2021-11-12 16:27:13 -06:00
Scott Shawcroft
6a8c82d542
Merge pull request #5573 from ladyada/main
...
fix speed by not rotating
2021-11-12 09:27:46 -08:00
anecdata
e4f06f69cd
maybe fewer bytes
2021-11-11 23:23:52 -06:00
anecdata
bb8e9ef483
tweak exception messages (re-tested)
2021-11-11 21:54:41 -06:00
lady ada
104af801b7
fix speed by not rotating
2021-11-11 21:39:23 -05:00
anecdata
18f2019300
Set Station MAC address & validate connect SSID len
2021-11-11 17:04:35 -06:00
Limor "Ladyada" Fried
accadf9c25
Merge pull request #5570 from ladyada/main
...
add esp32s2 tft feather rev A
2021-11-11 17:06:34 -05:00
Scott Shawcroft
c1177662cd
Merge pull request #5537 from microDev1/monitor-mode
...
Add Monitor Mode
2021-11-11 10:10:39 -08:00
lady ada
0ba47ed115
comma on
2021-11-11 11:43:44 -05:00
Jeff Epler
cd6599ce65
A few more missing-prototypes fixes
2021-11-11 08:42:30 -06:00
lady ada
bcec249091
displaaaaaaaaay
2021-11-10 23:13:22 -05:00
Jeff Epler
340d6b9213
more missing-prototypes fixes
2021-11-10 21:00:17 -06:00
ladyada
d30c3ba4c6
nu board w tft
2021-11-10 17:23:29 -05:00
Jeff Epler
5cba23e04d
More missing-prototypes fixes
2021-11-10 12:22:07 -06:00
microDev
a62675a81a
fix wifi reset and monitor deinit routine
2021-11-10 23:38:44 +05:30
Jeff Epler
c9475adb00
Enable -Werror=missing-prototypes on espressif port
2021-11-10 11:07:45 -06:00
lady ada
afd035eb56
remove old nopsram version
2021-11-10 12:05:16 -05:00
Jeff Epler
6351de6ad1
espressif: Allow -DENABLE_JTAG=0 to force JTAG off
...
With the Kaluga devkit, the camera interferes with the JTAG function.
However, having DEBUG turned on e.g., to get extended debug information
on the UART debug connection remains useful.
Now, by arranging to add to CFLAGS += -DDEBUG -DENABLE_JTAG=0, this
configuration is easy to achieve.
2021-11-08 10:38:05 -06:00
microDev
b435e7b56a
update wifi monitor
...
- rename loss method to lost
- add method to get queued packet count
Co-authored-by: anecdata <16617689+anecdata@users.noreply.github.com>
2021-11-04 16:21:18 +05:30
Jeff Epler
a8614a61dc
ParallelImageCapture: Add continuous capture on espressif
...
By having a pair of buffers, the capture hardware can fill one buffer while
Python code (including displayio, etc) operates on the other buffer. This
increases the responsiveness of camera-using code.
On the Kaluga it makes the following improvements:
* 320x240 viewfinder at 30fps instead of 15fps using directio
* 240x240 animated gif capture at 10fps instead of 7.5fps
As discussed at length on Discord, the "usual end user" code will look like
this:
camera = ...
with camera.continuous_capture(buffer1, buffer2) as capture:
for frame in capture:
# Do something with frame
However, rather than presenting a context manager, the core code consists of
three new functions to start & stop continuous capture, and to get the next
frame. The reason is twofold. First, it's simply easier to implement the
context manager object in pure Python. Second, for more advanced usage, the
context manager may be too limiting, and it's easier to iterate on the right
design in Python code. In particular, I noticed that adapting the
JPEG-capturing programs to use continuous capture mode needed a change in
program structure.
The camera app was structured as
```python
while True:
if shutter button was just pressed:
capture a jpeg frame
else:
update the viewfinder
```
However, "capture a jpeg frame" needs to (A) switch the camera settings and (B)
capture into a different, larger buffer then (C) return to the earlier
settings. This can't be done during continuous capture mode. So just
restructuring it as follows isn't going to work:
```python
with camera.continuous_capture(buffer1, buffer2) as capture:
for frame in capture:
if shutter button was just pressed:
capture a jpeg frame, without disturbing continuous capture mode
else:
update the viewfinder
```
The continuous mode is only implemented in the espressif port; others
will throw an exception if the associated methods are invoked. It's not
impossible to implement there, just not a priority, since these micros don't
have enough RAM for two framebuffer copies at any resonable sizes.
The capture code, including single-shot capture, now take mp_obj_t in the
common-hal layer, instead of a buffer & length. This was done for the
continuous capture mode because it has to identify & return to the user the
proper Python object representing the original buffer. In the Espressif port,
it was convenient to implement single capture in terms of a multi-capture,
which is why I changed the singleshot routine's signature too.
2021-11-03 11:02:46 -05:00
microDev
27b137f931
Merge branch 'main' into monitor-mode
2021-11-02 13:56:56 +05:30
microDev
4e207853f0
rearrange hostname
2021-11-02 12:33:11 +05:30
microDev
95172cf3ce
add monitor class
...
Co-authored-by: anecdata <16617689+anecdata@users.noreply.github.com>
2021-11-02 12:32:09 +05:30
Dan Halbert
c61ab864da
Update ports/espressif/boards/adafruit_feather_esp32s2/board.c
2021-10-26 17:14:23 -04:00
Limor "Ladyada" Fried
037d893923
Update ports/espressif/boards/adafruit_feather_esp32s2/pins.c
...
Co-authored-by: Dan Halbert <halbert@halwitz.org>
2021-10-26 15:55:18 -04:00
Limor "Ladyada" Fried
ccb6c5e5a9
Update ports/espressif/boards/adafruit_feather_esp32s2/mpconfigboard.h
...
Co-authored-by: Dan Halbert <halbert@halwitz.org>
2021-10-26 15:55:11 -04:00
Limor "Ladyada" Fried
5e59fa65ec
Update ports/espressif/boards/adafruit_feather_esp32s2/mpconfigboard.mk
...
Co-authored-by: Dan Halbert <halbert@halwitz.org>
2021-10-26 15:54:49 -04:00
lady ada
613f314857
will delete later
2021-10-26 15:09:05 -04:00
