Commit Graph

1322 Commits

Author SHA1 Message Date
robert-hh c3305c49e4 stm32: Add definitions required for lwIP version of Wiznet NIC. 2022-08-23 14:58:13 +10:00
robert-hh 717924001d stm32: Switch Wiznet to use lib/wiznet5k and extmod/network_wiznet5k.
Instead of the old Wiznet driver in drivers/wiznet5k.
2022-08-23 14:57:54 +10:00
Damien George 8f4c108025 all: Remove MICROPY_PY_IO_FILEIO config option.
Since commit e65d1e69e8 there is no longer an
io.FileIO class, so this option is no longer needed.

This option also controlled whether or not files supported being opened in
binary mode (eg 'rb'), and could, if disabled, lead to confusion as to why
opening a file in binary mode silently did the wrong thing (it would just
open in text mode if MICROPY_PY_IO_FILEIO was disabled).

The various VFS implementations (POSIX, FAT, LFS) were the only places
where enabling this option made a difference, and in almost all cases where
one of these filesystems were enabled, MICROPY_PY_IO_FILEIO was also
enabled.  So it makes sense to just unconditionally enable this feature
(ability to open a file in binary mode) in all cases, and so just remove
this config option altogether.  That makes configuration simpler and means
binary file support always exists (and opening a file in binary mode is
arguably more fundamental than opening in text mode, so if anything should
be configurable then it should be the ability to open in text mode).

Signed-off-by: Damien George <damien@micropython.org>
2022-08-18 11:54:17 +10:00
Angus Gratton a16a330da5 nrf,stm32: Don't enable debug info by default if LTO is on.
It seems sometimes gcc with LTO will generate otherwise valid assembly
listings that cause 'as' to error out when generating DWARF debug info; see
https://sourceware.org/bugzilla/show_bug.cgi?id=29494

Therefore, don't enable -g by default if LTO is on.

Enabling LTO=1 DEBUG=1 is still possible but may result in random errors
at link time due to 'as' (the error in this case is "Error: unaligned
opcodes detected in executable segment", and the only other easy workaround
is CFLAGS+=-fno-jump-tables which may increase code size significantly).

Follows on from fdfe4eca74
2022-08-15 22:55:34 +10:00
Andrew Leech 6804b6f54f stm32/boards/NUCLEO_WB55: Add error handling to firmware update scripts.
In-the-field use of these FUS/WS firmware update scripts has exposed some
weak points, causing corrupted FUS/WS firmware to be flashed to the unit.

The problems are mostly caused with the ST GUI application, but sometimes
from un-recognised failures during bin file transfer to the WB55 prior to
running the rfcore_firmware.py script.  Other failures were caused by
incorrect load addresses being used, again both from user error copying the
address from the HTML release notes to the GUI tool, but also from
similarly not updating the address correctly in rfcore_firmware.py

To guard against these errors and make it easier to prepare different
versions, this commit adds a few features to the rfcore firmware update
tools:
- When creating the bin file, automatically parse the release note in the
  folder to get the correct address.
- Add a footer to the bin file containing the name, version, CRC, address
  etc.
- Before flashing rfcore, check if the same version is already installed.
- Verify the CRC and obfuscation key before flashing bin.
- Log the name and version of file being flashed.
2022-08-08 23:42:20 +10:00
David Lechner 10f85fee18 stm32/boards/LEGO_HUB_NO7: Add LEGO Hub No. 7 board definition.
This adds support for the LEGO Hub No. 7, aka LEGO Technic Small hub, aka
LEGO SPIKE Essential hub.  This board is largely similar to Hub No. 6:

- Same MCU (STM32F413 - different packaging with fewer pins).
- Same Bluetooth chip (TI CC2564).
- Same IMU chip.
- Similar external flash chip - 4MiB instead of 32MiB.
- 2 I/O ports instead of 6.
- No display - only status and battery LEDs.
- Different LED driver chip.
- Only 1 button which is also the power button.
- No speaker.

Signed-off-by: David Lechner <david@pybricks.com>
2022-08-06 00:01:31 +10:00
David Lechner 0f0f2351bb stm32/boards/LEGO_HUB_NO6/cc2564: Make timer configurable.
This adds configurable macros to define the timer and channel used to
provide the Bluetooth 32768 MHz clock.  This will allow code to be shared
with LEGO_HUB_NO7.

Signed-off-by: David Lechner <david@pybricks.com>
2022-08-06 00:01:28 +10:00
David Lechner f69af16619 stm32/boards/LEGO_HUB_NO6/spiflash: Pick command type at runtime.
This changes spiflash.py to read the flash chip ID at runtime to select the
read/write/erase commands.  This will allow the code to be shared with
LEGO_HUB_NO7 which doesn't use the 32-bit commands.

Also remove an unused constant while we are touching this.

Signed-off-by: David Lechner <david@pybricks.com>
2022-08-06 00:01:24 +10:00
David Lechner 9a51273d96 stm32/boards/LEGO_HUB_NO6/appupdate: Detect filesystem size at runtime.
This changes appupdate.py to get the filesystem size at runtime.  This will
allow the code to be shared with LEGO_HUB_NO7 which has a similar flash
chip with a different size.

Signed-off-by: David Lechner <david@pybricks.com>
2022-08-06 00:01:10 +10:00
David Lechner 7cc6df3303 stm32/boards/LEGO_HUB_NO6: Use named pins.
This changes all uses of pins to use the alias names of the pins.  This
makes the code easier to understand and will also allow sharing more code
with LEGO_HUB_NO7.

Signed-off-by: David Lechner <david@pybricks.com>
2022-08-05 23:57:35 +10:00
David Lechner 6152bbe3dd stm32/boards/LEGO_HUB_NO6: Fix typo in README.
This fixes a typo in the build directory path.

Signed-off-by: David Lechner <david@pybricks.com>
2022-08-05 23:57:15 +10:00
Angus Gratton fdfe4eca74 ports: Always include debug information in the ELF.
For bare metal ARM & xtensa targets, passing -g will make the ELF file
larger but doesn't change the binary size.  However, this means tools like
gdb, addr2line, etc can extract source-level information from the ELF.

Also standardise -ggdb to -g, these produce the exact same ELF file on
arm-none-eabi-gcc and will use DWARF format for all these ports.
2022-07-29 11:24:00 +10:00
Jim Mussared 092784da19 ports: Remove unused mp_type_{fileio/textio} macros in mpconfigport.h.
Signed-off-by: Jim Mussared <jim.mussared@gmail.com>
2022-07-26 18:07:22 +10:00
Tim Gates f736afb577 drivers,ports: Fix a few typos in comments.
Fixes:
- Should read `definitions` rather than `defintions`.
- Should read `resolution` rather than `resoultion`.
- Should read `inefficient` rather than `inefficent`.
- Should read `closed` rather than `closded`.

Signed-off-by: Tim Gates <tim.gates@iress.com>
2022-07-23 23:24:24 +10:00
robert-hh c781899438 stm32/softtimer: Switch to use softtimer code from shared/runtime. 2022-07-19 12:33:19 +10:00
Damien George b89422ceaa extmod: Always use custom mbedtls error message code.
All ports that use mbedtls use the custom error messages in
mp_mbedtls_errors.c.  This commit simplifies the build so that ports don't
need to explicitly add this file, it's now used by default when mbedtls is
enabled.

Signed-off-by: Damien George <damien@micropython.org>
2022-07-18 22:55:22 +10:00
Angus Gratton 1d23c01dd6 stm32/Makefile: Workaround LTO linker order bug in binutils <2.35.
Assembly files with weak symbols need to be linked first to avoid issues
with the weak symbols being incorrectly linked instead of strong ones.

See https://gcc.gnu.org/bugzilla/show_bug.cgi?id=83967 and
https://bugs.launchpad.net/gcc-arm-embedded/+bug/1747966

This is the workaround suggested in comment 10 of the gcc-arm-embedded bug.

Signed-off-by: Angus Gratton <angus@redyak.com.au>
2022-07-18 16:12:08 +10:00
David Lechner 7e4b205cb0 py/mpstate: Drop MICROPY_PORT_ROOT_POINTERS from mp_state_vm_t.
All in-tree uses of MICROPY_PORT_ROOT_POINTERS have been replaced with
MP_REGISTER_ROOT_POINTER(), so now we can remove both
MICROPY_PORT_ROOT_POINTERS and MICROPY_BOARD_ROOT_POINTERS from the code
and remaining config files.

Signed-off-by: David Lechner <david@pybricks.com>
2022-07-18 13:51:16 +10:00
David Lechner 816e4537f2 stm32: Use MP_REGISTER_ROOT_POINTER().
This uses MP_REGISTER_ROOT_POINTER() to register all port-specific root
pointers in the stm32 port.

Signed-off-by: David Lechner <david@pybricks.com>
2022-07-18 13:50:34 +10:00
David Lechner a3703584fe extmod/modnetwork: Use MP_REGISTER_ROOT_POINTER().
This uses MP_REGISTER_ROOT_POINTER() to register mod_network_nic_list and
removes the same from all mpconfigport.h.

Signed-off-by: David Lechner <david@pybricks.com>
2022-07-18 13:50:25 +10:00
David Lechner e531b72b56 extmod/nimble: Use MP_REGISTER_ROOT_POINTER().
This uses MP_REGISTER_ROOT_POINTER() to register bluetooth_nimble_memory
and bluetooth_nimble_root_pointers and removes the same from all
mpconfigport.h.

Signed-off-by: David Lechner <david@pybricks.com>
2022-07-18 13:50:14 +10:00
David Lechner 8fa6191f95 extmod/btstack: Use MP_REGISTER_ROOT_POINTER().
This uses MP_REGISTER_ROOT_POINTER() to register
bluetooth_btstack_root_pointers and removes the same from all
mpconfigport.h.

Signed-off-by: David Lechner <david@pybricks.com>
2022-07-18 13:49:51 +10:00
David Lechner 81dbea1ce3 shared/readline: Use MP_REGISTER_ROOT_POINTER().
This uses MP_REGISTER_ROOT_POINTER() to register the readline_history root
pointer array used by shared/readline.c and removes the registration from
all mpconfigport.h files.

This also required adding a new MICROPY_READLINE_HISTORY_SIZE config option
since not all ports used the same sized array.

Signed-off-by: David Lechner <david@pybricks.com>
2022-07-18 13:48:49 +10:00
David Lechner fc3d7ae11b py/make_root_pointers: Add MP_REGISTER_ROOT_POINTER parser/generator.
This adds new compile-time infrastructure to parse source code files for
`MP_REGISTER_ROOT_POINTER()` and generates a new `root_pointers.h` header
file containing the collected declarations.  This works the same as the
existing `MP_REGISTER_MODULE()` feature.

Signed-off-by: David Lechner <david@pybricks.com>
2022-07-18 13:48:23 +10:00
Damien George 1329155b96 stm32/sdram: Include boardctrl.h for fatal-error handler.
Signed-off-by: Damien George <damien@micropython.org>
2022-07-11 14:47:46 +10:00
Damien George 9af6a275dd stm32/boardctrl: Allow boards to override fatal-error handler.
To override it a board must define MICROPY_BOARD_FATAL_ERROR to a function
that takes a string message and does not return.

Signed-off-by: Damien George <damien@micropython.org>
2022-07-08 23:47:29 +10:00
Damien George d27e58449b stm32/mboot: Remove redundant code in mboot_state_change function.
This code was made redundant in 87fbceef26

Signed-off-by: Damien George <damien@micropython.org>
2022-07-05 23:47:54 +10:00
Jim Mussared 6519b1b95e stm32/Makefile: Fix setting of define that enables WIZNET5K driver.
Commit 9670a156da missed one renaming of
MICROPY_PY_WIZNET5K to MICROPY_PY_NETWORK_WIZNET5K which prevented the
Wiznet interface from being enabled.

Signed-off-by: Jim Mussared <jim.mussared@gmail.com>
2022-07-02 00:21:36 +10:00
Angus Gratton dd77dbd4f7 stm32/boards: Enable LTO by default on boards with smaller flash size.
Signed-off-by: Angus Gratton <gus@projectgus.com>
2022-06-28 10:32:39 +10:00
Angus Gratton e76d88b531 stm32/Makefile: Enable link-time-optimisation via LTO=1 make option.
When tested, this reduces default MP binary sizes by approx 2-2.5%, and
very marginally increases performance in benchmarks. Build times seem very
similar to non-LTO when using gcc 12.

See #8733 for further discussion.

Signed-off-by: Angus Gratton <gus@projectgus.com>
2022-06-28 10:31:32 +10:00
Angus Gratton 2c015375d1 stm32: Use a separate symbol name for the bootloader state pointer.
Prerequisite for enabling Link Time Optimisation.

The _bl_state address is the same as _estack, but _estack is referred to as
a uint32_t elsewhere in the code. LTO doesn't like it when the same symbol
has two different types.

Signed-off-by: Angus Gratton <gus@projectgus.com>
2022-06-28 10:25:08 +10:00
Koen De Vleeschauwer 432b65f178 stm32/usb: Expose USB HID device instance via usbd_hid_get().
This is needed to implement a HID device in user C modules.
2022-06-24 18:33:26 +10:00
iabdalkader 6c1495b5fe stm32/usbd_cdc_interface: Add support for Arduino 1200bps touch.
If the serial port is closed with baudrate at 1200 then the board will
enter its bootloader.
2022-06-23 14:30:07 +10:00
David Lechner c118b5d0e4 extmod/extmod.mk: Separate out extmod file list from py.mk to extmod.mk.
This separates extmod source files from `py.mk`.  Previously, `py.mk`
assumed that every consumer of the py/ directory also wanted to include
extmod/.  However, this is not the case.  For example, building mpy-cross
uses py/ but doesn't need extmod/.

This commit moves all extmod-specific items from `py.mk` to `extmod.mk` and
explicitly includes `extmod.mk` in ports that use it.

Signed-off-by: David Lechner <david@pybricks.com>
2022-06-21 00:14:34 +10:00
Damien George 1842efbdd9 stm32/Makefile: Set CSUPEROPT to -Os for F0 and G0 MCUs to save space.
Saves 1804 bytes on NUCLEO_F091RC, and 1080 bytes on NUCLEO_G0B1RE.

Signed-off-by: Damien George <damien@micropython.org>
2022-06-20 23:37:38 +10:00
chrismas9 868f23b362 stm32/boards/NUCLEO_F091RC: Enable LFS1 filesystem.
And disable some less common features to make space for it.

Signed-off-by: Chris Mason <c.mason@inchipdesign.com.au>
2022-06-17 21:27:41 +10:00
chrismas9 fdbca3c143 stm32/boards/stm32f091xc.ld: Allocate space for a small filesystem.
Signed-off-by: Chris Mason <c.mason@inchipdesign.com.au>
2022-06-17 21:27:32 +10:00
Damien George d8e7ecd231 stm32/modmachine: Factor out mboot enter code to a function.
Signed-off-by: Damien George <damien@micropython.org>
2022-06-17 13:57:47 +10:00
iabdalkader 0adf0dd3d7 stm32/modmachine: Allow boards to provide custom bootloader code.
And expose the machine_bootloader() C function so it can be used elsewhere.
2022-06-17 13:36:55 +10:00
Damien George 096954337f stm32/mboot: Only include UI code if at least one board LED is defined.
Otherwise the board must provide dummy definitions of MBOOT_LED1.

Signed-off-by: Damien George <damien@micropython.org>
2022-06-16 14:31:09 +10:00
Damien George 3452ee58d3 stm32/boards/LEGO_HUB_NO6: Add comment to readme about powering off.
Signed-off-by: Damien George <damien@micropython.org>
2022-06-09 13:24:08 +10:00
Damien George 45a0c6da5b stm32/mboot: Remove MP_WEAK on led funcs and make some of them static.
Both led_init and led_state are configurable via MBOOT_BOARD_LED_INIT and
MBOOT_BOARD_LED_STATE respectively, so don't need to be MP_WEAK.

Furthermore, led_state and led0_state are private to ui.c so can be made
static.

Signed-off-by: Damien George <damien@micropython.org>
2022-06-09 13:24:08 +10:00
Damien George bd5152c928 stm32/mboot: Add board-configurable SysTick hook.
Signed-off-by: Damien George <damien@micropython.org>
2022-06-09 13:24:08 +10:00
Clayton Mills 767f2ce9a7 stm32/usbd_conf: Remove disable of SYSCFG clock.
System config block contains hardware unrelated to USB.  So calling
`__SYSCFG_CLK_DISABLE()` during `HAL_PCD_MspDeInit()` has an adverse effect
on other system functionality.

Removing call to `__SYSCFG_CLK_DISABLE()` to rectify this issue.

This call was there since the beginning of the USB CDC code, added in
b30c02afa0.
2022-06-07 18:09:58 +10:00
Clayton Mills 0d8d911950 stm32/powerctrl: Disable sys tick interrupt in stop mode on some STM32s.
According to ST Errata ES0206 Rev 18, Section 2.2.1, on STM32F427x,
STM32F437x, STM32F429x and STM32F439x.

If the system tick interrupt is enabled during stop mode while certain
bits are set in the DBGMCU_CR, then the system will immediately wake
from stop mode.

Suggested workaround is to disable system tick timer interrupt when
entering stop mode.

According to ST Errate ES0394 Rev 11, Section 2.2.17, on STM32WB55Cx and
STM32WB35Cx.

If the system tick interrupt is enabled during stop 0, stop 1 or stop 2
while certain bits are set in DBGMCU_CR, then system will immediately
wake from stop mode but the system remains in low power state. The CPU
therefore fetches incorrect data from inactive Flash, which can cause a
hard fault.

Suggested workaround is to disable system tick timer interrupt when
entering stop mode.
2022-06-07 18:08:02 +10:00
Damien George 14105ff5b1 stm32/machine_i2c: Enable timingr constructor keyword on H7 MCUs.
Signed-off-by: Damien George <damien@micropython.org>
2022-06-07 17:05:05 +10:00
Damien George a0dae1dda2 stm32/flash: Remove FLASH_OPTR_DBANK condition in L4, H7 get_bank func.
This was added by mistake in 8f68e26f79 when
adding support for G4 MCUs, which does not using this get_bank() function.

FLASH_OPTR_DBANK is only defined on G4 and L4 MCUs, so on H7 this
FLASH_BANK_2 code was being wrongly excluded.

Signed-off-by: Damien George <damien@micropython.org>
2022-06-07 16:55:18 +10:00
Damien George 9670a156da all: Rename MICROPY_PY_WIZNET5K to MICROPY_PY_NETWORK_WIZNET5K.
To match MICROPY_PY_NETWORK_CYW43 and MICROPY_PY_NETWORK_NINAW10.

Signed-off-by: Damien George <damien@micropython.org>
2022-06-07 16:55:18 +10:00
Andrew Leech 8fb01be6cf stm32/rfcore: Remove extra layer of buffering on BLE IPCC.
Whole packets are now pushed up to the higher layer of the BLE stack,
instead of buffering the packets so individual bytes can be requested.
2022-06-03 11:58:43 +10:00
Damien George efe23aca71 all: Remove third argument to MP_REGISTER_MODULE.
It's no longer needed because this macro is now processed after
preprocessing the source code via cpp (in the qstr extraction stage), which
means unused MP_REGISTER_MODULE's are filtered out by the preprocessor.

Signed-off-by: Damien George <damien@micropython.org>
2022-06-02 16:31:37 +10:00