9a8484b853
Update mpconfigboard.h
...
Removed ignore PA30 PA31 in order to allow using them as pinout
2020-10-31 11:06:56 +01:00
a7616808e9
Updated pinout
2020-10-31 10:12:49 +01:00
59b9ca409c
matrixportal ESP TX and RX pins were swapped
2020-10-28 20:33:10 -04:00
930cf14dce
Add check for invalid io, function to disable all alarms
2020-10-27 16:17:26 -07:00
e35938971a
Add description of alarm modules
2020-10-27 16:16:55 -07:00
54c0e98a37
Fix openbook build
2020-10-27 13:58:23 -07:00
fa4c4c2c10
Merge pull request #3587 from adafruit/6.0.x
...
Merge in two fixes from 6.0.x
2020-10-21 20:12:20 -05:00
1a677406bf
Merge pull request #3529 from jensechu/color-converter-transparency
...
displayio: Pass transparent_color to ColorConverter
2020-10-20 10:41:57 -07:00
8beb36c240
Use one lto partition
...
This leads to smaller code size at the expense of slower linking.
We can turn partitioning back on with GCC10 because it produces smaller code.
2020-10-20 09:24:03 -07:00
1eab0692b5
Fix missing `nproc` on macOS.
...
396979a
2020-10-20 16:39:32 +02:00
eb139c9bab
Correct pins to not reset.
...
They must have the PORT_ prefix otherwise they mask the wrong pins.
Fixes #3552
2020-10-19 17:41:16 -07:00
cc411f47eb
samd: Update peripherals submodule
...
(https://github.com/adafruit/samd-peripherals/pull/37 )
2020-10-17 20:08:32 -05:00
fb768dfc14
samd: AnalogOut: Better handle boards which IGNOREd analog pins
2020-10-17 20:08:32 -05:00
194d99f588
sparkfun_lumidrive: Can't IGNORE pins that are default bus pins
...
The SDA, SCL, and MISO pins were ignored. This error was not diagnosed
before now.
2020-10-17 20:08:32 -05:00
eb0b023dee
samd: extend IGNORE_PIN_foo to all sam e5x/e5x pins
2020-10-17 20:08:32 -05:00
4b9fc5de53
samd: update peripherals submodule
...
this is possible now that the undefined reference to pin_PA30 has been
resolved.
2020-10-17 20:08:32 -05:00
aa3c890ead
samd: pin: Fix 'undefined reference to pin_PA30'
...
.. when PA30 is IGNOREd
2020-10-17 20:08:32 -05:00
396979a67e
atmel-samd: parallelize lto linking
...
This decreases the link time, especially on desktop machines with many CPU
cores. However, it does come at a slight cost in binary size, making the flash
section about 200 bytes bigger for circuitplayground_express.
Before, linking build-circuitplayground_express/firmware.elf takes
8.8s elapsed time, leaving 3128 bytes free in flash.
After, linking build-circuitplayground_express/firmware.elf takes 2.8s elapsed
time, leaving 2924 bytes free in flash. (-6 seconds, -204 bytes free)
If necessary, we can make this per-board or even per-translation to squeeze full
builds.
2020-10-17 20:08:32 -05:00
878f2322e7
Merge pull request #3564 from BHDynamics/dynossat_edu
...
Add DynOSSAT-EDU boards
2020-10-16 11:30:42 -07:00
6631c8d393
Add USB VID&PID
2020-10-16 13:52:46 +02:00
12ed3fc72f
disable on winterbloom_sol and thunderpack
2020-10-15 18:48:28 -04:00
f51e75c1d2
cxd56 needed more precise include for __packed; needed SRC_C += on some ports
2020-10-15 15:24:24 -04:00
82b49afe43
enable CIRCUITPY_BLEIO_HCI on non-nRF boards where it will fit
2020-10-15 11:27:21 -04:00
97fae54659
Add DynOSSAT-EDU boards
2020-10-15 12:39:14 +02:00
f1e8f2b404
Merge pull request #3554 from gamblor21/move_ordereddict
...
Moved ORDEREDDICT define to central location
2020-10-14 22:39:04 -04:00
0a9bcc538b
Removed ordered dict for all SAMD21
2020-10-14 20:15:21 -05:00
852a91e1b7
boards/bdmicro_vina_d51/pins.c: Fix illegal QSTR name (hyphen).
2020-10-14 08:29:28 -04:00
e9c04bc1f0
Merge pull request #3550 from bd34n/bdmicro_vina_d51
...
Add new board to atmel-samd port: bdmicro_vina_d51
2020-10-13 23:15:25 -04:00
4270061db4
Moved ORDEREDDICT define to central location
2020-10-13 18:52:27 -05:00
2b33968a1e
Add new board to atmel-samd port: bdmicro_vina_d51
2020-10-13 16:46:25 -04:00
2bc40bcadf
Remove readreq when changing continuous
2020-10-13 10:15:34 -07:00
379e73af2e
Finer grained, per port tick locking
...
Fixes #3504 hopefully.
2020-10-12 18:43:21 -07:00
bb046f9983
Merge pull request #3540 from WarriorOfWire/async_syntax
...
__await__ magic method and async/await
2020-10-12 15:31:43 -07:00
10badd93c3
leftover newlines
2020-10-11 22:52:27 -07:00
94beeabc51
remove unnecessary board configuration and address feedback
2020-10-11 22:42:59 -07:00
3c46e3a6aa
Turn off async for circuitplayground express
...
Firmware too large
2020-10-11 08:16:36 -07:00
f5f1e29dc0
disable async/await on a several small ucontrollers
2020-10-10 15:43:12 -07:00
70a94c8d2d
fix for https://github.com/adafruit/circuitpython/issues/3534
2020-10-10 12:27:35 -04:00
3ccf644dd0
Fix autoreload on SAMD21
...
The issue was that a time.sleep() would set the RTC wake up
further into the future even if we wanted to tick every ms. Ticking
every ms is used to time the autoreload delay and without it,
autoreload doesn't work.
Fixes #3528
2020-10-09 12:53:00 -07:00
085d2a2274
Update submodule to merge commit
2020-10-07 14:09:26 -05:00
16ed875f4e
canio: remove unused fields
...
these relate to properties that were removed as well
2020-10-06 20:14:50 -05:00
d62ac24493
Merge pull request #3469 from jepler/noreturn
...
Add some NORETURN attributes
2020-10-01 11:18:36 -07:00
5ac3c36d64
Merge pull request #3450 from mdroberts1243/New_quirk_for_SH1107
...
New quirk for sh1107
2020-09-30 12:03:10 -07:00
c129c8f296
Merge remote-tracking branch 'origin/main' into canbus-api-changes
2020-09-29 20:15:11 -05:00
2bb44f6c4d
Merge pull request #3486 from microDev1/fixTranslate
...
Update make translate script
2020-09-29 14:32:49 -05:00
611f81ac1a
canio: actually drop the _error_count properties
...
thanks @tannewt
2020-09-29 14:25:53 -05:00
4c7d9e3aaf
Update make translate script
2020-09-29 11:14:30 +05:30
726dcdb60a
Add some NORETURN attributes
...
I have a function where it should be impossible to reach the end, so I put in a safe-mode reset at the bottom:
```
int find_unused_slot(void) {
// precondition: you already verified that a slot was available
for (int i=0; i<NUM_SLOTS; i++) {
if( slot_free(i)) {
return i;
}
}
safe_mode_reset(MICROPY_FATAL_ERROR);
}
```
However, the compiler still gave a diagnostic, because safe_mode_reset was not declared NORETURN.
So I started by teaching the compiler that reset_into_safe_mode never returned. This leads at least one level deeper due to reset_cpu needing to be a NORETURN function. Each port is a little different in this area. I also marked reset_to_bootloader as NORETURN.
Additional notes:
* stm32's reset_to_bootloader was not implemented, but now does a bare reset. Most stm32s are not fitted with uf2 bootloaders anyway.
* ditto cxd56
* esp32s2 did not implement reset_cpu at all. I used esp_restart(). (not tested)
* litex did not implement reset_cpu at all. I used reboot_ctrl_write. But notably this is what reset_to_bootloader already did, so one or the other must be incorrect (not tested). reboot_ctrl_write cannot be declared NORETURN, as it returns unless the special value 0xac is written), so a new unreachable forever-loop is added.
* cxd56's reset is via a boardctl() call which can't generically be declared NORETURN, so a new unreacahble "for(;;)" forever-loop is added.
* In several places, NVIC_SystemReset is redeclared with NORETURN applied. This is accepted just fine by gcc. I chose this as preferable to editing the multiple copies of CMSIS headers where it is normally declared.
* the stub safe_mode reset simply aborts. This is used in mpy-cross.
2020-09-28 18:55:56 -05:00
b1e1237887
Merge branch 'main' into New_quirk_for_SH1107
2020-09-28 19:40:47 -04:00
f4e36fc7f6
CAN: Use mp_obj_t insteaed of canio_message_obj_t, get rid of rtr field
2020-09-28 17:22:00 -05:00
3e97e9c4be
canio: Listener: shuffle function declarations around
2020-09-28 17:22:00 -05:00
48bda589b8
Listerner: read -> receive, drop readinto
...
This prepares for creating a separate RemoteTransmissionRequest class
2020-09-28 17:22:00 -05:00
79ca430ddf
Match: address -> id
2020-09-28 17:22:00 -05:00
96323ac3ac
Default power on Wio Terminal's 40 Pin
2020-09-27 10:21:25 +08:00
791d20f16c
give qtpy haxpress its own USB PID
2020-09-26 11:45:53 -05:00
9944935fde
qtpy haxpress: enable RTC
2020-09-26 11:33:10 -05:00
22a7696fac
Changes take 2: missed ugame10 board
2020-09-25 22:17:59 -04:00
b921543571
Requested changes take 1
2020-09-25 21:27:29 -04:00
eadb4de144
qtpy_m0_haxpress: add
2020-09-24 16:58:24 -05:00
bcabf5e019
Merge pull request #3457 from ladyada/qtpy_m0
...
fix pins for rev C
2020-09-23 11:31:28 -07:00
9db7625717
neopix is default on!
2020-09-23 11:19:01 -04:00
5384479a61
fix pins for rev C
2020-09-22 23:28:23 -04:00
59580d0f2d
canio: Fix implementation bugs in atmel-sam
2020-09-22 09:36:29 -05:00
4869dbdc67
canio: rename from _canio
...
This reflects our belief that the API is stable enough to avoid incompatible changes during 6.x.
2020-09-21 16:44:26 -05:00
9e8f1820c8
canio.CAN: switch rx/tx, make both mandatory, move declarations around
2020-09-21 16:44:26 -05:00
4e4853dcb2
common.template.ld: remove unneeded line
2020-09-21 16:44:26 -05:00
df379b84cb
remove unneeded symbols
2020-09-21 16:44:26 -05:00
7fd6cab2ac
canio: Make both tx and rx (but not both) optional
...
.. loopback and silent come from the (optional) constructor parameters
not guessing based on the pin specification
.. docstring & comment improvements
2020-09-21 16:44:26 -05:00
09f8a83a75
samd: template.ld: put canram in its own output section
2020-09-21 16:44:26 -05:00
a76119afcb
add _canio to Feather M4 CAN
2020-09-21 16:44:26 -05:00
67d8f108bb
Add CAN to SAM E51 clock config
2020-09-21 16:44:26 -05:00
44c5b2bbb1
Respond to review comments
...
Thanks @tannewt!
2020-09-21 16:44:26 -05:00
58b920ed97
fix whitespace
2020-09-21 16:44:26 -05:00
27cbb690e5
_canio: Add listener matching
...
Lightly tested:
* no matches (catch-all)
* standard address single address matches (even and odd positions)
* standard address mask matches
* only tested that extended doesn't match non-extended
2020-09-21 16:44:26 -05:00
635fcadb59
_canio.CAN: add error handling & bus state
2020-09-21 16:44:26 -05:00
a2e1867f69
_canio: Minimal implementation for SAM E5x MCUs
...
Tested & working:
* Send standard packets
* Receive standard packets (1 FIFO, no filter)
Interoperation between SAM E54 Xplained running this tree and
MicroPython running on STM32F405 Feather with an external
transceiver was also tested.
Many other aspects of a full implementation are not yet present,
such as error detection and recovery.
2020-09-21 16:44:26 -05:00
183649aad8
samd: move mcu_find_pin_function to header
...
.. it'll be used in can as well as sdio
2020-09-21 16:44:07 -05:00
9cc803eb95
Merge pull request #3432 from bd34n/rename-bdmicro-vina-m0-d21
...
Rename board bdmicro_vina_m0 to bdmicro_vina_d21 and update boardfiles.
2020-09-19 13:41:21 -04:00
5116375604
Merge pull request #3436 from jepler/fix-spi-sercom4
...
samd: SPI: improve conditional code
2020-09-18 19:14:39 -04:00
23dd7c7c96
Merge pull request #3435 from jepler/fix-sdhc1
...
sdioio: fix code for the case where there is no SDHC1
2020-09-18 17:10:59 -04:00
550b42e4d3
Merge pull request #3434 from jepler/same54-disable-cpu-voltage
...
sam e54: disable microcontroller.cpu.voltage
2020-09-18 15:20:43 -04:00
45eec5b5a5
samd: SPI: improve conditional code
...
I recently misdiagnosed a "maybe-uninitialized" diagnostic as a bug in
asf4. However, the problem was in our SPI code.
A special case for samr21 MCUs was being applied to same54p20a and possibly
other D5x/E5x MCUs, since the check was simply for pin PC19 existing at all.
Change the check to use the macro PIN_PC19F_SERCOM4_PAD0 which is only
defined if special function F of pin PC19 is SERCOM4 PAD0.
Reorganize the code a little bit so that brace-matching in editors is
not confused by the conditionalized code, including an unrelated change
for APA102_SCK's condition.
Revert the change to the Makefile that incorrectly attempted to silence
the diagnostic.
2020-09-17 18:30:22 -05:00
c73182803d
sdioio: fix code for the case where there is no SDHC1
...
.. it doesn't really make a difference (the old code created an empty
else{} statement) but this is more correct.
2020-09-17 18:29:31 -05:00
1b29ceaf1a
sam e54: disable microcontroller.cpu.voltage
...
This hangs, and the usual workarounds didn't work.
2020-09-17 18:27:43 -05:00
4b827b25ad
Merge pull request #2966 from sommersoft/ci_check_vid_pid
...
Automate USB VID/PID Uniqueness Check
2020-09-17 11:48:46 -07:00
81ee874531
pins.c: fix trailing whitespace
2020-09-16 16:40:04 -04:00
847d609ddc
rename board bdmicro_vina_m0 to bdmicro_vina_d21 and update boardfiles appropriately
2020-09-16 16:27:24 -04:00
1fc797132a
Merge pull request #3237 from DavePutz/issue3216
...
Issue#3216 - Needed an alternate way to check if background tasks were run
2020-09-16 08:47:33 -05:00
95e27bb8bf
Add more PIDs for unique boards
2020-09-15 13:43:35 -07:00
3c6af94fb3
Merge pull request #3384 from jepler/feather_m4_can
...
atmel-samd: add same51, feather_m4_can
2020-09-14 23:57:51 -04:00
067a975875
update submodules to merge commits
2020-09-14 17:22:30 -05:00
2a2a8d6457
Merge pull request #28 from adafruit/main
...
Merge from adafruit/main
2020-09-14 16:50:40 -05:00
2eca4ee902
Update PulseIn.c
2020-09-14 11:04:45 -05:00
c014ac3089
Reworked check for input taking too long
2020-09-14 10:54:57 -05:00
af24c8ae06
Merge remote-tracking branch 'origin/main' into implicit-fallthrough-diagnostic
...
Conflict in locale/circuitpython.pot resolved with 'make translate'
2020-09-13 14:21:21 -05:00
73ad78ed1b
Merge pull request #3395 from microDev1/safeMode
...
Add esp32s2 safe mode support & fix user_safe_mode output
2020-09-13 14:18:59 -05:00
90f7340bfc
move implicit-fallthrough warning enable to defns.mk
2020-09-13 13:13:09 -05:00
36da92075b
Update safe mode reason
2020-09-13 22:57:24 +05:30
5deac8d249
Update board specific safe mode message
2020-09-13 18:22:40 +05:30
2fac4851a5
fix typo, tested hardware, neopixel doesnt work tho
2020-09-12 19:56:13 -04:00
ITACA Innovation S.R.L
Dan Halbert
microDev
Scott Shawcroft
Jeff Epler
Scott Shawcroft
Christian Walther
Jeff Epler
Enrique Casado
Dan Halbert
gamblor21
Brian Dean
Limor "Ladyada" Fried
Kenny
Kenny
mdroberts1243
Anson He
DavePutz