Andrew Scheller
902d9552c5
Replace some Makefile commands with variables in py/mkenv.mk
2014-04-07 01:35:45 +01:00
Damien George
a12be917a4
stmhal: Add timer module; move servo PWM from TIM2 to TIM5.
...
As per issue #257 , servo is better on TIM5 because TIM2 is connected to
more GPIO.
2014-04-02 15:09:36 +01:00
Damien George
09d207785c
stmhal: Unify naming of HW config; make SD detect configurable.
...
All board config macros now begin with MICROPY_HW_.
Renamed PYBv10 to PYBV10, since macros should be all uppercase.
Made SDCARD_DETECT configurable in mpconfigport.h, so that the SD
detect pin can be easily configured.
2014-03-30 12:30:35 +01:00
Damien George
038df43183
stmhal: Implement selector for USB device mode; improve boot up.
...
Can now choose at boot up whether the USB device is CDC+MSC or CDC+HID.
Choice is made by an option in boot.py, with default being CDC+MSC.
HID+MSC is not currently supported, but should be easy to implement.
Boot up now has ability to change the reset mode: hold down USR switch
while booting and LEDs will count from 1 to 7 to indicate the boot mode.
Release USR when correct mode is selected. Current modes are 1 (normal
boot), 2 (safe mode), 3 (reset FS mode).
2014-03-30 00:00:15 +00:00
Damien George
c9fd6645b0
stmhal: Factor out stdio and readline to separate files.
...
Adds readline_init() to clear readline history on soft reset. Addresses
issue #387 .
2014-03-29 14:20:05 +00:00
Damien George
6cfda3084d
stmhal: Add I2C support; change accel driver to use new I2C.
2014-03-25 23:26:14 +00:00
Damien George
caac542b23
Proper support for registering builtin modules in ROM.
...
Comes with some refactoring of code and renaming of files. All modules
are now named mod*.[ch].
2014-03-25 14:18:18 +00:00
Dave Hylands
1403298a65
stmhal - fixed up adc stuff
...
Added support for the ADC channels and mappings to make_pins.py
I'm not sure if the hal properly deals with the channel 16/18 differences
between the 40x and 42x. It seems to deal with it partially. This particular
aspect will need testing on a 42x or 43x.
2014-03-24 11:16:35 -07:00
Damien George
b13492f8ad
stmhal: Add DAC driver.
2014-03-24 15:15:33 +00:00
Damien George
5fd2ebbbdd
stmhal: Update help function.
2014-03-24 11:27:56 +00:00
Damien George
02fa035800
stmhal: Add input() and pyb.input() functions.
2014-03-22 23:53:50 +00:00
Damien George
626f6b8133
stmhal: Add servo driver.
2014-03-22 15:52:33 +00:00
Damien George
d311655655
stmhal: Add time module with sleep function.
2014-03-22 15:06:29 +00:00
Damien George
ad7b84a7b9
stmhal: Add os module with a few basic functions.
2014-03-22 14:56:32 +00:00
Damien George
684164a8cf
stmhal: Add PYBv10 config; add RNG support.
2014-03-22 13:41:02 +00:00
Damien George
fb25c2d95f
stmhal: USB CDC and MSC device work together.
2014-03-22 12:32:54 +00:00
Damien George
8913c04831
stmhal: Add support for USB MSC device.
...
This gives a functioning, independent MSC device.
2014-03-21 23:32:01 +00:00
Damien George
f78d9b1a72
stmhal: Add accelerometer driver; fix bug with LFN.
2014-03-20 23:33:30 +00:00
Damien George
494600bc99
stmhal: Add lcd.c to Makefile, and init LCD in main.
2014-03-19 13:12:30 +00:00
Damien George
b92d3e1fde
stmhal: Add fatfs support, working with flash and SD card.
2014-03-17 14:04:19 +00:00
Damien George
9e5ea4d768
stmhal: Add flash write support and flash storage driver.
2014-03-17 13:31:35 +00:00
Damien George
fb431bf556
stmhal: Add SD card support.
...
Just low-level read/write support. No filesystem yet.
2014-03-17 13:03:41 +00:00
Damien George
8b96af6907
stmhal: Get RTC working.
2014-03-15 12:54:48 +00:00
Damien George
e285511a23
stmhal: Get USB CDC REPL working.
...
New USB HAL is quite a bit improved over previous one. Now has better
callbacks and flow control.
REPL over USB CDC now works as before, except for soft-reset (since USB
driver uses malloc...).
2014-03-15 11:52:29 +00:00
Dave Hylands
ca5444e6cd
stmhal - add pin mapping, gpio, exti, usrsw
2014-03-14 23:41:28 -07:00
Damien George
b30c02afa0
stmhal: Get USB enumerating a CDC device.
...
Enumerates CDC device over USB, but doesn't transmit/receive yet.
2014-03-14 00:30:37 +00:00
Dave Hylands
ef39f2d9ca
Cleanup systick for stmhal
2014-03-13 14:40:49 -07:00
Dave Hylands
f14b92b9e1
REPl working on UART6 with STMHAL
2014-03-12 18:15:55 -07:00
Damien George
4ef1dbcbf6
stmhal: Get SysTick and HSE working.
2014-03-12 21:59:33 +00:00
Dave Hylands
dd38d90724
Initial checkin with STM HAL
...
This compiles and links, but hasn't been tested on a board
yet and even if it was run, it doesn't currently do anything.
2014-03-11 23:55:41 -07:00
