Commit Graph

31 Commits

Author SHA1 Message Date
Scott Shawcroft 5bb8a7a7c6
Improve iMX RT performance
* Enable dcache for OCRAM where the VM heap lives.
* Add CIRCUITPY_SWO_TRACE for pushing program counters out over the
  SWO pin via the ITM module in the CPU. Exempt some functions from
  instrumentation to reduce traffic and allow inlining.
* Place more functions in ITCM to handle errors using code in RAM-only
  and speed up CP.
* Use SET and CLEAR registers for digitalio. The SDK does read, mask
  and write.
* Switch to 2MiB reserved for CircuitPython code. Up from 1MiB.
* Run USB interrupts during flash erase and write.
* Allow storage writes from CP if the USB drive is disabled.
* Get perf bench tests running on CircuitPython and increase timeouts
  so it works when instrumentation is active.
2023-03-14 12:30:58 -07:00
Scott Shawcroft 931c7c1c51
Add Bangle.js 2, JDI memory displays and ACeP epd
This 2-in-1 PR started with the goal of support the Bangle.js 2
smartwatch with *no USB*.
* Adds "secure" DFU build support with a committed private key.
* Adds 3-bit color support with one dummy bit for the JDI memory display
* Allows nrf boards to have a board_background_task() run in RUN_BACKGROUND_TASK.
  This is needed because the Bangle.js 2 uses the watchdog to reset.
* Renamed port_background_task() to port_background_tick() to indicate it
  runs on tick, not RUN_BACKGROUND_TASK.
* Marks serial connected when the display terminal is inited. This means
  that safe mode messages show up on the display.

ACep, 7-color epaper displays also pack 3 bits in 4. So, I added that
support as well.
* Adds 3-bit ACeP color support for 7-color e-paper displays. (Not
  watch related but similar due to color depth.)
* Allows a refresh sequence instead of a single int command. The 7" ACeP
  display requires a data byte for refresh.
* Adds optional delay after resetting the display. The ACeP displays
  need this. (Probably to load LUTs from flash.)
* Adds a cleaning phase for ACeP displays before the real refresh.

For both:
* Add dither support to Palette.
* Palette no longer converts colors when set. Instead, it caches
  converted colors at each index.
* ColorConverter now caches the last converted color. It should make
  conversions faster for repeated colors (not dithering.)
2023-02-15 15:03:40 -08:00
Dan Halbert 52080e24eb status bar control 2022-08-30 15:23:44 -04:00
Scott Shawcroft 167108a91f
Fix builds with displayio but not terminalio 2022-08-04 16:34:25 -07:00
Scott Shawcroft 3a2bcbc5c7
Enable title bar on all builds
* Tweak scroll area position so last line is complete and top is
  under the title bar.
* Pick Blinka size based on the font to minimize unused space in
  title bar. Related to #2791
* Update the title bar after terminal is started. Fixes #6078

Fixes #6668
2022-08-04 16:33:10 -07:00
Scott Shawcroft 4e70781c45
Remove extra glyph padding 2022-06-13 09:21:41 -07:00
Scott Shawcroft 6446010753
Wi-Fi autoconnect and title bar status
This adds support for CIRCUITPY_WIFI_SSID and CIRCUITPY_WIFI_PASSWORD
in `/.env`. When both are defined, CircuitPython will attempt to
connect to the network even when user code isn't running. If the
user code attempts to a network with the same SSID, it will return
immediately. Connecting to another SSID will disconnect from the
auto-connected network. If the user code initiates the connection,
then it will be shutdown after user code exits. (Should match <8
behavior.)

This PR also reworks the default displayio terminal. It now supports
a title bar TileGrid in addition to the (newly renamed) scroll area.
The default title bar is the top row of the display and is positioned
to the right of the Blinka logo when it is enabled. The scroll area
is now below the Blinka logo.

The Wi-Fi auto-connect code now uses the title bar to show its
state including the IP address when connected. It does this through
the "standard" OSC control sequence `ESC ] 0 ; <s> ESC \` where <s>
is the title bar string. This is commonly supported by terminals
so it should work over USB and UART as well.

Related to #6174
2022-06-09 14:55:54 -07:00
Timon a1052d5f73
Initial broadcom port for Raspberry Pi
This targets the 64-bit CPU Raspberry Pis. The BCM2711 on the Pi 4
and the BCM2837 on the Pi 3 and Zero 2W. There are 64-bit fixes
outside of the ports directory for it.

There are a couple other cleanups that were incidental:
* Use const mcu_pin_obj_t instead of omitting the const. The structs
  themselves are const because they are in ROM.
* Use PTR <-> OBJ conversions in more places. They were found when
  mp_obj_t was set to an integer type rather than pointer.
* Optimize submodule checkout because the Pi submodules are heavy
  and unnecessary for the vast majority of builds.

Fixes #4314
2021-11-22 14:54:44 -08:00
James Carr 3e543264a5
Convert all_characters to a list before using extend() 2021-08-31 15:26:28 +01:00
Scott Shawcroft 1e225610cc
Add ability to disable BLE workflow
Call `supervisor.disable_ble_workflow()` and the BLE workflow will
be disabled until the chip is reset.

This also includes a couple fixes:
1. Terminals can now be deinit by setting the tilegrid to NULL. This
  prevents using the tilegrid before display is init.
2. Fix BLE serial send amount when sending more than a single packet.

Fixes #5049
2021-08-02 18:37:19 -07:00
Jeff Epler 35f1da4c1a gen_display_resources: Always treat the sample file as utf-8.
This may help resolve the build problems reported at
#4750.
2021-05-11 21:48:06 -05:00
microDev a52eb88031
run code formatting script 2021-03-15 19:27:36 +05:30
foamyguy 5c3371bd1a fix bitmap_font path in display resource gen 2021-02-05 18:05:37 -06:00
Jeff Epler 5056027238 gen_display_resources: report missing character count, if any 2020-08-18 19:25:09 -05:00
Jeff Epler 880fe1a694 gen_display_resources: silence 'missing character' message
Since we made the decision to allow translations which do not have coverage in
the terminal font, these routinely occur and are expected.  The message is
unhelpful and due to their voume make it harder to find relevant information
particularly in github actions results.
2020-08-16 20:58:24 -05:00
Diego Elio Pettenò 34b4993d63 Add license to some obvious files. 2020-07-06 19:16:25 +01:00
Jeff Epler a93475707e gen_display_resources: speed it up
It was intended that the `f.load_glyphs` line was fast and did most of
the work.  However, it actually didn't, because it's necessary to pass
in a code point by number, not by string.

Additionally, a little light layer violation is needed to make the check
for missing characters fast.  This used to be less important, as no
fonts had missing characters.  However, it would take an appreciable
length of time on the Korean translation when failing to find hundreds
of different code points.

Testing performed: built
build-circuitplayground_express_displayio/autogen_display_resources.c with ko
translation before and after change.  verified the file content was identical.
Time went from about 7s on my machine to way under 1 second.
2019-12-19 16:26:01 -06:00
Scott Shawcroft 949f8761b8
Add .hidden to TileGrid and Group
This allows for one to preserve ordering within a Group while
hiding something temporarily.

Fixes #1688
2019-09-03 16:15:27 -07:00
Scott Shawcroft 70680d5b22
EPaper displays work mostly. 2019-08-22 14:08:33 -07:00
Scott Shawcroft 26f64dd8ec
Merge remote-tracking branch 'adafruit/4.1.x' into merge_in_410 2019-08-05 17:53:08 -07:00
Scott Shawcroft 6797ec6ed3
Add support for grayscale displays that are < 8 bit depth.
This also improves Palette so it stores the original RGB888 colors.

Lastly, it adds I2CDisplay as a display bus to talk over I2C. Particularly
useful for the SSD1306.

Fixes #1828. Fixes #1956
2019-07-19 16:06:11 -07:00
Scott Shawcroft 4a6bdb6fe4
Track a dirty area for in-memory bitmaps
This fixes the bug that bitmap changes do not cause screen updates
and optimizes the refresh when the bitmap is simply shown on the
screen. If the bitmap is used in tiles, then changing it will
cause all TileGrids using it to do a full refresh.

Fixes #1981
2019-07-18 16:47:28 -07:00
Radomir Dopieralski 7c908b08ee Use FONTBOUNDINGBOX for font metrics
Instead of iterating over all the glyphs and calculating the maximum
width and height, use the FONTBOUNDINGBOX to determine the size of a
tile for terminalio.

This works better with fonts such as generated by FontForge, that don't
include the empty space in the glyph bitmap itself. It also lets the
font author specify vertical spacing they want.

I only tested this with the default font and with one I generated with
FontForge.
2019-06-30 01:10:47 +02:00
Scott Shawcroft eb21fc3e31
Add partial display update support.
Different operations to the display tree have different costs. Be
aware of these costs when optimizing your code.
* Changing tiles indices in a TileGrid will update an area
covering them all.
* Changing a palette will refresh every object that references it.
* Moving a TileGrid will update both where it was and where it moved to.
* Adding something to a Group will refresh each individual area it
covers.
* Removing things from a Group will refresh one area that covers all
previous locations. (Not separate areas like add.)
* Setting a new top level Group will refresh the entire display.

Only TileGrid moves are optimized for overlap. All other overlaps
cause sending of duplicate pixels.

This also adds flip_x, flip_y and transpose_xy to TileGrid. They
change the direction of the pixels but not the location.

Fixes #1169. Fixes #1705. Fixes #1923.
2019-06-12 11:32:39 -07:00
Scott Shawcroft 3fad7de8db
Rework the pixel computation to use areas
This changes the displayio pixel computation from per-pixel to
per-area. This is precursor work to updating portions of the screen
(#1169). It should provide mild speedups because bounds checks are
done once per area rather than once per pixel. Filling by area also
allows TileGrid to maintain a row-associative fill pattern even when
the display's refresh is orthogonal to it.
2019-05-21 17:41:06 -07:00
Scott Shawcroft 6fcda1dec4
Support multi-byte values with Bitmap
It also corrects the behavior of single byte values.

Fixes #1744
2019-04-04 12:50:35 -07:00
Scott Shawcroft 5e2fec714c
Move Glyph and BuiltinFont into fontio
It was confusing in displayio.

Fixes #1662
2019-03-19 16:22:09 -07:00
Scott Shawcroft c17f147be9
A variety of displayio improvements
This changes a number of things in displayio:
* Introduces BuiltinFont and Glyph so the built in font can be used by libraries. For boards with
  a font it is available as board.TERMINAL_FONT. Fixes #1172
* Remove _load_row from Bitmap in favor of bitmap[] access. Index can be x/y tuple or overall index. Fixes #1191
* Add width and height properties to Bitmap.
* Add insert and [] access to Group. Fixes #1518
* Add index param to pop on Group.
* Terminal no longer takes unicode character info. It takes a BuiltinFont instead.
* Fix Terminal's handling of [###D vt100 commands used when up arrowing into repl history.
* Add x and y positions to Group plus scale as well.
* Add bitmap accessor for BuiltinFont
2019-02-11 20:55:05 -08:00
Scott Shawcroft ec03887040
Fix hallowing and nrf builds 2019-01-31 11:42:15 -08:00
Scott Shawcroft 1a1dbef992
Hook up the terminal based on the first display. 2019-01-31 11:42:14 -08:00
Scott Shawcroft 590e029198
Begin font parsing and packing for terminal 2019-01-31 11:42:13 -08:00