Daniel Campora
af33ebb13b
cc3200: Increment telnet Tx retry delay on every try.
2015-07-09 17:30:17 +02:00
Daniel Campora
9220dc466a
cc3200: Correct udelay us to ticks calculation.
2015-07-08 13:13:37 +02:00
Daniel Campora
d18ced9cdd
cc3200: Use alternative HAL_Delay also when interrupts are disabled.
2015-07-08 12:48:35 +02:00
Daniel Campora
a0a3de60be
cc3200: Translate simplelink's socket error numbers to POSIX values.
2015-07-07 16:13:54 +02:00
Daniel Campora
5685b565c3
cc3200: Create /flash/sys and /flash/lib directories while booting.
2015-07-07 16:13:40 +02:00
Daniel Campora
76e52b5daf
cc3200: Make update-wipy.py more robust.
2015-07-07 16:11:48 +02:00
Daniel Campora
fa655ce196
cc3200: Improve interrupt handling and fix bug in HAL_Delay().
2015-07-07 16:11:05 +02:00
Daniel Campora
194c8c761e
cc3200: Increment interrupt stack size from 2K to 3K.
2015-07-07 16:10:10 +02:00
Daniel Campora
aaf7c5b35e
cc3200/README.md: Improve make deploy instructions.
2015-07-04 16:39:05 +02:00
Daniel Campora
c030e77861
cc3200: Enable base64 methods from modubinascii.
2015-07-04 16:33:54 +02:00
Daniel Campora
219a74c014
cc3200/README.md: Add notes about deploying a new software version.
2015-07-04 16:32:49 +02:00
Daniel Campora
31b40eebe8
cc3200: Fix socket recv and recvfrom return value type.
2015-07-02 23:17:22 +02:00
Daniel Campora
5161239c9f
cc3200: time.sleep() now receives seconds, like CPython.
2015-07-02 17:23:22 +02:00
Daniel Campora
9a65fa304c
cc3200: Add modussl, ssl sockets subclassed from normal sockets.
...
Stream methods were added to normal sockets as in the unix port.
2015-07-02 16:30:00 +02:00
Daniel Campora
7c1c9af5d4
cc3200: Code clean-up on pybpin.
2015-07-02 16:29:51 +02:00
Daniel Campora
4f8eeaedef
cc3200: Set WLAN date/time via the rtc.datetime method().
...
WLAN needs time info when validating certificates.
2015-07-02 16:29:43 +02:00
Daniel Campora
d680e28a11
cc3200: Optimize check for WLAN AP mode.
2015-07-02 16:15:59 +02:00
Daniel Campora
7fd538c1b6
cc3200: Raise an exception if trying to scan for networks in AP mode.
2015-07-02 15:03:58 +02:00
Daniel Campora
f522849a4d
cc3200: Add socket.timeout and socket.error exceptions.
2015-07-02 11:53:15 +02:00
Daniel Campora
70fc42cb28
cc3200: Add CA, certificate and key files to the updater list.
2015-06-30 22:11:15 +02:00
Daniel Campora
5ebf39784a
cc3200: Correct socket settimeout time format.
2015-06-29 11:01:11 +02:00
Daniel Campora
4f5b896a0b
cc3200: Adapt update-wipy.py timing to improve stability.
2015-06-28 14:14:24 +02:00
Daniel Campora
813b581127
cc3200: Add Pin.name() method.
2015-06-28 14:14:22 +02:00
Daniel Campora
778413168b
cc3200: Enable more features to improve compatibility with stmhal.
2015-06-28 14:14:20 +02:00
Daniel Campora
d02f671737
cc3200: Add deploy target and improve robustness of update-wipy.py.
2015-06-24 15:26:05 +02:00
Daniel Campora
e64afde073
cc3200: Create tools folder and add update-wipy.py script.
...
This script is used by Jenkins to update the WiPy with the newly
built firmware before running the tests. It's not placed in the
common tools folder because it is very WiPy specific.
2015-06-24 12:36:38 +02:00
Daniel Campora
92d95cc9d3
cc3200: Remove --specs=nano.specs linker flag.
2015-06-18 09:01:37 +02:00
Daniel Campora
ea2cc2b907
docs: Add more documentation for the CC3200 in the pyb module.
2015-06-16 15:45:24 +02:00
Daniel Campora
cdfa11f550
cc3200: In Timer.callback() only use value param if in edge count mode.
2015-06-16 15:34:46 +02:00
Daniel Campora
f28ed55aeb
cc3200/README.md: Specify the board name in the build command.
2015-06-11 09:26:36 +02:00
Daniel Campora
b630de1103
cc3200: Rename os.mkdisk() to os.mkfs().
2015-06-10 23:35:45 +02:00
Daniel Campora
1811c6bccf
cc3200: Remove Timer.AB constant.
...
Timer.A and Timer.B can be ORed for this purpose.
2015-06-10 23:35:43 +02:00
Daniel Campora
e2dc7ac2a9
cc3200: Clarify notes about the extended functionality of uhashlib.
2015-06-10 23:35:41 +02:00
Daniel Campora
95cc1ff542
cc3200: Re-name pyb.hard_reset() to pyb.reset().
2015-06-10 23:35:40 +02:00
Daniel Campora
330e21c986
cc3200: Use the pull up/down resistors on the antenna selection pins.
2015-06-10 23:35:38 +02:00
Daniel Campora
f960d753e4
cc3200: Fix bootloader build error.
2015-06-10 23:35:36 +02:00
Daniel Campora
3319780e96
cc3200: Add sendbreak method to the UART.
2015-06-10 23:35:35 +02:00
Daniel Campora
8a6d93aeed
cc3200: Make UART API more similar to stmhal.
2015-06-10 23:35:33 +02:00
Daniel Campora
640d00ea9d
cc3200: Change MP_OBJ_NULL for mp_const_none in params default value.
2015-06-10 23:35:32 +02:00
Daniel Campora
071d47fa3b
cc3200: Only kick the WDT if it's actually running.
2015-06-10 23:35:30 +02:00
Daniel Campora
6148f8b7d2
cc3200: Add contructor to the HeartBeat class.
2015-06-10 23:35:28 +02:00
Daniel Campora
371f4ba6b3
cc3200: Wrap antenna_init0() with #if MICROPY_HW_ANTENNA_DIVERSITY.
2015-06-08 10:38:19 +02:00
Daniel Campora
491c321720
cc3200: Re-config antenna selection when waking from suspended mode.
2015-06-07 13:28:47 +02:00
Daniel Campora
b4a41a8f70
cc3200: Add missing antenna diversity source files.
2015-06-07 00:42:40 +02:00
Daniel Campora
a3acaa000c
cc3200: Add antenna selection feature to WLAN.
2015-06-07 00:06:27 +02:00
Daniel Campora
a3cf4ea2f6
cc3200: Do not kick the watchdog inside the idle task.
2015-06-04 10:13:55 +02:00
Daniel Campora
71f85cc330
cc3200: Close ftp and telnet server sockets if listening fails.
2015-06-04 10:13:53 +02:00
Daniel Campora
cc20482aa9
cc3200: Add method to configure the servers timeout.
...
With network.server_timeout(secs) the timeout can be changed.
The default value is 300 secs. Minimmum accpeted is 5 secs.
Without params the function returns the current configured timeout.
2015-06-03 17:31:21 +02:00
Daniel Campora
2ffb6e1b15
cc3200: Fix 'MP_QSTR_sd' undeclared error when building for the LAUNCHXL.
2015-06-02 13:11:01 +02:00
Daniel Campora
84d11b5e53
cc3200: Add period set method to the Timer class.
2015-05-29 15:54:46 +02:00
