Dan Halbert
ae64f9fd78
Merge pull request #6899 from BPI-STEAM/CircuitPython-main-BPI-BIT-S2-PR
...
Add BananaPi BPI-Bit-S2 .
2022-09-13 23:02:46 -04:00
Wind-stormger
6f4cc611ed
Add BananaPi BPI-Bit-S2 .
...
Adds support for the BananaPi BPI-Bit-S2 Boards.
Based on esp32s2 chip.
With 25 ws2812 LEDs, 1 buzzer, 2 photosensitive sensors, 1 thermosensitive sensor,
2 buttons on the front, 1 reset button and 1 boot button on the back.
2022-09-14 10:21:23 +08:00
Kong Wai Weng
c157f1cb39
Cast pin_number to int8_t so that it can be used with switch-case.
2022-09-12 18:56:15 +08:00
Kong Wai Weng
0ae015e4d9
Removed whitespaces.
2022-09-12 18:25:27 +08:00
Kong Wai Weng
aaa2be1200
Set the default pin state for GPIOs to pull down.
2022-09-12 18:19:33 +08:00
microDev
36221bd749
update board microdev_micro_c3
2022-09-11 13:31:38 +05:30
microDev
8cd4b9fc04
fix espressif run modes
2022-09-10 18:08:09 +05:30
Kong Wai Weng
2fbb3090e2
Changed the pins assignment.
2022-09-09 16:50:14 +08:00
Dan Halbert
dd37c81136
Merge pull request #6847 from dhalbert/status-bar-control
...
Allow enabling and disabling of status bar
2022-09-08 10:48:36 -04:00
Dan Halbert
58b00467c4
Merge pull request #6878 from dhalbert/weak-board-defs
...
Use MP_WEAK for default board.c routines
2022-09-08 10:47:08 -04:00
Dan Halbert
4cb69a51d5
Use MP_WEAK for default board.c routines
2022-09-08 07:36:50 -04:00
Seon Rozenblum
6c4f352533
Fixed incorrect IO naming for ProS3 and FeatherS3
2022-09-07 19:51:45 +10:00
Dan Halbert
14498f793d
Merge pull request #6859 from wemos/s3_cpython
...
Add LOLIN S3 ESP32-S3 board.
2022-09-04 13:10:52 -04:00
bill88t
ca7fb6dede
removal of sda-scl and add "GP" to 40,41
2022-09-04 18:05:50 +03:00
bill88t
e1891038c8
Forgor the one IO pin and sda-scl
2022-09-04 16:59:56 +03:00
wemos
3a18d285a2
Add LOLIN S3 ESP32-S3 board.
2022-09-03 11:06:51 +08:00
Dan Halbert
52080e24eb
status bar control
2022-08-30 15:23:44 -04:00
Jeff Epler
2c6f57be5e
Update ports/espressif/common-hal/esp32_camera/Camera.c
...
Co-authored-by: Mark <56205165+gamblor21@users.noreply.github.com>
2022-08-28 16:46:50 -05:00
Jeff Epler
dc27fb967d
error at runtime if no psram actually reserved
2022-08-26 09:27:50 -05:00
Jeff Epler
9f22e75e5e
error if camera is configured but no psram
2022-08-26 09:27:50 -05:00
Jeff Epler
8ed6a6135a
Disable camera on boards without psram
2022-08-26 09:27:50 -05:00
Scott Shawcroft
2f0e209eca
Merge pull request #6772 from dhalbert/esp32-touch-fix
...
Fix ESP32 touch; rework common code a bit
2022-08-17 10:24:22 -07:00
Dan Halbert
2bc8d73776
Fix ESP32 touch; rework common code a bit
2022-08-16 20:04:27 -04:00
Martin
528da05f54
Add Waveshare ESP32-S2-Pico-LCD
2022-08-15 16:46:14 +02:00
lady ada
2f2ccdddbf
pycam rev b pins
2022-08-13 23:41:35 -04:00
MicroDev
fa3e265bfb
Merge pull request #6753 from tannewt/esp_led_reset
...
Audit all boards with LED pins defined
2022-08-13 15:25:02 +05:30
Scott Shawcroft
df1435ae94
Audit all boards with LED pins defined
...
Add them as MICROPY_HW_LED_STATUS so that we can share reset code
for them. They aren't actually used for the status if another RGB
option is available. (But maybe they should be.)
Fixes #6717
2022-08-11 14:41:20 -07:00
Scott Shawcroft
5823bcc744
Merge branch 'main' into c3_short_send
2022-08-11 12:45:02 -07:00
Scott Shawcroft
f1053fb963
Introduce port_yield()
...
This allows the web workflow send code to yield briefly when
waiting for more room to send in a socket. Waiting for an "interrupt"
could wait forever because the select task only waits for read and
error. Adding wait on write is tricky because much of the time we
don't care if the sockets are ready to write. Using yield avoids
this trickiness.
2022-08-11 11:25:34 -07:00
Scott Shawcroft
f9d724c09e
Fix retries after successful connection.
...
We may have set retries to 0 to enforce a timeout but the connect
succeeded. When it succeeds, we want to allow retries later in
case we lose signal briefly. (The callback will do this too but
the connect function will override it after.)
Also, remove extra code from websocket that is leftover from
debugging.
2022-08-10 15:24:08 -07:00
Jeff Epler
c2a45c1f27
Merge pull request #6739 from jepler/qrio-esp32camera
...
Enable qrio to work with rgb565 data, including byte-swapped data
2022-08-10 13:54:40 -05:00
Scott Shawcroft
7a5d2e81fc
Merge pull request #6734 from dhalbert/remove-autobrightness
...
Remove support for auto-brightness
2022-08-10 10:22:53 -07:00
Jeff Epler
86f9d98a5d
fix documentation of framebuffer_count
2022-08-10 11:12:54 -05:00
Dan Halbert
af64faae1e
switch back one I2C message
2022-08-10 12:06:43 -04:00
Dan Halbert
198c8fea11
merge from upstream and fix espressif_esp32s3_eye
2022-08-10 08:43:08 -04:00
Dan Halbert
02cc6c2aee
Merge remote-tracking branch 'adafruit/main' into remove-autobrightness
2022-08-10 08:35:53 -04:00
Dan Halbert
41bcd7b260
Remove support for auto-brightness
2022-08-09 22:40:21 -04:00
Scott Shawcroft
59b4353282
Merge pull request #6713 from tannewt/exception_filename
...
Add exception filename to title bar
2022-08-09 16:59:12 -07:00
Jeff Epler
5040e1b7a5
Merge pull request #6684 from jepler/espressif-camera-2
...
Rewrite camera support for the Espressif port
2022-08-09 18:50:25 -05:00
Scott Shawcroft
db837e2b48
Merge pull request #6725 from dhalbert/esp-stack-size-16kB
...
increase main task stack size from 8kB to 16kB
2022-08-09 16:40:16 -07:00
Scott Shawcroft
554063a817
Merge branch 'main' into espressif-camera-2
2022-08-09 14:07:14 -07:00
Scott Shawcroft
5084de1b73
Merge pull request #6708 from strid3r21/main
...
Added Smart Bee Design Boards
2022-08-09 14:06:11 -07:00
Dan Halbert
c4db71d12e
Merge pull request #6721 from dhalbert/i2c-target
...
Change I2C terminology from "peripheral" to "target"
2022-08-09 16:12:17 -04:00
Dan Halbert
4021b44a39
increase main task stack size from 8kB to 16kB
2022-08-09 15:00:01 -04:00
Scott Shawcroft
b3b27a1d80
Remove extra leading spaces
2022-08-09 10:45:47 -07:00
Scott Shawcroft
556d01a685
Remove extra newline at end of file
2022-08-09 10:44:57 -07:00
Scott Shawcroft
ce1273be7a
Pull Feather S2 TFT LED down on reset
2022-08-09 10:42:56 -07:00
Jeff Epler
c74746f052
Cross references in documentation always help
2022-08-09 12:20:02 -05:00
Dan Halbert
84807cd6eb
Change I2C terminology from "peripheral" to "target"
2022-08-09 13:13:19 -04:00
Jeff Epler
5a85b8ab95
improve docstrings based on my best sleuthing
2022-08-09 11:42:19 -05:00
