Commit Graph

690 Commits

Author SHA1 Message Date
Paul Sokolovsky b4df3e74e1 docs/esp8266/quickref: Further improvements for SPI subsections.
Consistency and formatting.
2016-09-04 23:31:05 +03:00
Paul Sokolovsky 20da9064d7 docs/esp8266/quickref: Update information on SPI classes.
SPI(1) is not used for hardware SPI. Few more details are provided.
2016-09-04 21:13:55 +03:00
Damien George 76dcaddc0f docs/esp8266/quickref: Add internal links to docs for some modules. 2016-08-29 17:40:36 +10:00
Damien George efc904c41d docs/pyboard/quickref: Add section on "delay and timing" for utime mod.
And remove reference to deprecated pyb.delay() and pyb.millis().
2016-08-29 17:33:02 +10:00
Damien George 5c3a2f162e docs/pyboard/quickref: Add links to pinouts for other pyboard variants. 2016-08-29 17:32:38 +10:00
Philip Potter 0f8b1ba8a2 docs/library: Add reference for pyb.usb_mode and pyb.USB_HID. 2016-08-29 15:17:20 +10:00
Philip Potter f2da6467a9 docs/pyboard: Update USB mouse tutorial to use pyb.USB_HID(). 2016-08-29 15:16:51 +10:00
Philip Potter 57c92d90b0 docs/pyboard: Update USB mouse tutorial to use VCP instead of CDC. 2016-08-29 15:15:25 +10:00
Damien George 13c5a228c9 docs/esp8266: Update quickref and tutorial for OneWire/DS18X20 driver. 2016-08-29 12:52:50 +10:00
Radomir Dopieralski ed0a06a93f docs/esp8266/quickref: Fix and update the SPI docs
Use the `SPI` factory function in the examples, and use
proper baud rate of 80 000 000.
2016-08-28 23:14:45 +10:00
Radomir Dopieralski 8e7dfea803 esp8266/modpybhspi: Add a HSPI module for hardware SPI support
This module uses ESP8266's SPI hardware, which allows much higher
speeds. It uses a library from
https://github.com/MetalPhreak/ESP8266_SPI_Driver
2016-08-19 21:19:59 +03:00
Damien George 64c5a9435c docs/library/machine.WDT: Add note that WDT is only available on WiPy. 2016-08-17 14:22:39 +10:00
Paul Sokolovsky 5e01fb01b3 docs/esp8266/intro: Add command to install esptool.py 1.0.1 via pip.
It used a standard BootROM programming algo and may be useful as a
fallback.
2016-08-10 21:40:40 +03:00
Paul Sokolovsky 2146cdab5e docs/esp8266/tutorial/pins: Fix typo in commands for pin input mode. 2016-08-09 21:13:27 +03:00
Damien George e4e4526954 docs: Bump version to 1.8.3. 2016-08-09 23:49:25 +10:00
Paul Sokolovsky 5c73de0337 docs/uio: Mention seek()/flush() support for io.BytesIO. 2016-08-09 01:52:56 +03:00
Paul Sokolovsky 3e5534caf7 docs/esp8266/intro: Focus on hazards of unearthed power wrt electronics. 2016-08-07 22:41:34 +03:00
Paul Sokolovsky d2cab0b7be docs/esp8266/tutorial/intro: Add anchor for link from quickeref. 2016-08-07 22:16:40 +03:00
Paul Sokolovsky f84dda7111 docs/esp8266/quickref: Link to installation instructions. 2016-08-07 17:46:27 +03:00
Paul Sokolovsky a9923d190e docs/esp8266/intro: Add troubleshooting section.
Tries to summarize most of the issues we've seen so far.
2016-08-07 17:28:33 +03:00
Paul Sokolovsky 919c54f750 docs/esp8266/intro: Rename to "Getting started" from "Introduction".
People tend to skip introductions (everyone knows what esp8266 is, right?),
so try to do A/B testing with a title inviting to read it.
2016-08-07 17:28:23 +03:00
Paul Sokolovsky 1966745689 esp8266/tutorial/intro: Reword para abou -fm dio switch.
Not all NodeMCU boards require it.
2016-08-07 16:31:09 +03:00
Paul Sokolovsky fdb411a8c5 docs/library/index: Include array module in ToC. 2016-08-07 00:16:41 +03:00
Paul Sokolovsky 8a0b6f561c docs/array: Document array module. 2016-08-07 00:13:48 +03:00
Mike Causer ce166e6b68 docs: Spelling mistakes 2016-08-02 11:17:46 +03:00
Mike Causer b4564841b6 docs: Add DHT to ESP8266 Quick Ref and Tutorial 2016-08-01 14:39:57 +03:00
Damien George 1459a8d5c9 docs: Bump version to 1.8.2. 2016-07-10 12:46:50 +01:00
Martin Müller 047ac2044d docs/library: Fix typo in docs for usocket.listen(). 2016-06-26 12:38:20 +01:00
Paul Sokolovsky b2641b53e0 docs/conf.py: Exclude cmath from modindex for wipy. 2016-06-19 19:17:42 +03:00
Paul Sokolovsky 2b6dcdd3e4 docs/sys: print_exception: Fixes/clarifications. 2016-06-18 19:06:53 +03:00
Paul Sokolovsky 617e033e2f docs/select: Add an article. 2016-06-18 19:06:42 +03:00
Paul Sokolovsky 51805e4a3a docs: Rebuild docs from scratch, as required for proper only:: handling.
Docs are now by default rebuilt from scratch, as required to build
conditionalized (i.e. using only:: directive) docs across different
output types. We have pretty small docset, so that's still rather fast.
However, if that's a concern, incremental rebuilds can be used by
passing "FORCE=" (nothing after =) as a make parameter. This will work
when using the same output type (e.g. only "html").
2016-06-14 00:23:33 +03:00
Paul Sokolovsky 91031b60dc docs/conf.py: Active sphinx_selective_exclude extensions.
For modindex_exclude extension, per-port module excludes are also added.
With these changes, it's possible to generate docs for a particular port
devoid of any superfluous and unrelated content, including in indexes and
full-text search - with small caveat: when generating PDF docs after HTML,
or vice-versa cached internal doctree representation (build/*/doctrees/)
must be removed first.
2016-06-12 01:18:13 +03:00
Paul Sokolovsky f6d01b8b67 docs: Add sphinx_selective_exclude extension suite.
Designed specifically to workaround issues we were facing with generating
multiple conditionalized output docsets from a single master doctree.
Extensions were factored out into a separate project, based on the fact
that many other Sphinx users experience similar or related problems:
https://github.com/pfalcon/sphinx_selective_exclude

Corresponds to the 182f4a8da57 upstream revision.
2016-06-12 01:13:39 +03:00
Paul Sokolovsky 9de5eb278d docs/sys: Detailed description of print_exception() diff from traceback module. 2016-06-10 23:06:56 +03:00
Paul Sokolovsky 343b5c1081 docs/uctypes: Improve documentation.
Seealso and Limitations sectiosn added, better formatting and grammar.
2016-06-09 05:02:55 +03:00
Paul Sokolovsky 79b40d1127 docs/machine*: Remove explicit targets and "machine." prefixes on classes.
With currentmodule:: set properly, none are needed. Extra "machine." prefix
produces wrong indexing data.
2016-06-09 03:03:53 +03:00
Paul Sokolovsky a0c296f6d5 docs/machine.Pin: Disambiguate object call method. 2016-06-09 02:58:15 +03:00
Paul Sokolovsky 1d3b903eb5 docs/library/index: Add builtins.rst. 2016-06-09 00:26:44 +03:00
Paul Sokolovsky 0cec4e9bb8 docs/builtins: Enumerate all builtin functions implemented.
Based on unix version. No descriptions so far.
2016-06-09 00:24:52 +03:00
Paul Sokolovsky f1eb672d88 docs/pyb.Pin: Sort .af() and .af_list() methods together. 2016-06-08 16:36:22 +03:00
Paul Sokolovsky a384a53130 docs/pyb.*: Use proper class case in method headers.
Class designator will be used as is in indexes, so must match actual class
name.
2016-06-08 16:21:28 +03:00
Paul Sokolovsky 585aafc27e docs/pyb.ExtInt,pyb.Pin: Mark up class methods as such. 2016-06-08 16:00:12 +03:00
Paul Sokolovsky 0d8c22b122 docs/pyb.Pin: af_list() is a normal method, not a class method. 2016-06-08 15:57:46 +03:00
Paul Sokolovsky 8171995ee9 docs/pyb.CAN: Mark CAN.initfilterbanks() as classmethod explicitly. 2016-06-08 15:49:30 +03:00
Paul Sokolovsky bba77a2d01 docs/machine.Pin: Add class designator to all constants.
This makes rendered docs to not provide incorrect information and
consistent with how it's down for other machine classes.
2016-06-08 01:37:03 +03:00
Paul Sokolovsky 7d7243f44c docs/machine.*: Use proper class case in method headers.
Class designator will be used as is in indexes, so must match actual class
name.
2016-06-08 01:33:49 +03:00
Paul Sokolovsky 93968bd6fb docs/machine.UART: Cleanup pyboard section. 2016-06-08 01:32:16 +03:00
Paul Sokolovsky 0a4361ca67 docs/machine.Pin: Remove explicit target.
With currentmodule:: support, all targets should be generated properly by
Sphinx.
2016-06-08 01:13:59 +03:00
Paul Sokolovsky 0a4cc24b2e docs/pyb.*: Add "currentmodule:: pyb" directive.
Makes sure that classes described in these separate files are properly
designated as belonging to "pyb" module in indexes.
2016-06-08 00:57:41 +03:00
Paul Sokolovsky c8b7628094 docs/machine.*: Add "currentmodule:: machine" directive.
Makes sure that classes described in these separate files are properly
designated as belonging to "machine" module in indexes.
2016-06-08 00:46:27 +03:00
Paul Sokolovsky 2c5fc681c8 docs/library/machine.Pin: Mention GPIO and cross-link .value() function. 2016-06-07 17:49:00 +03:00
Paul Sokolovsky 6e2fa5237d docs/usocket: There must be empty line after .only:: . 2016-06-07 17:41:21 +03:00
Paul Sokolovsky 9b18811951 docs/ure: Typo fix. 2016-06-07 08:53:54 +03:00
Paul Sokolovsky 753a965363 docs/esp.socket: Remove unused file. 2016-06-07 02:40:05 +03:00
Paul Sokolovsky 9487b80666 docs/library/network: wipy: Fix literal block indentation. 2016-06-07 02:07:08 +03:00
Damien George 2bf6eb9fe2 docs: Add link to PDF version of docs in sidebar.
Requires a link of the form: <BASEURL>/<lang>/<ver>/micropython-<port>.pdf
2016-06-06 11:37:40 +01:00
Ben Hagen 0b913bd09f docs/esp8266/tutorial/network_basics: Minor typo fix, ap becomes ap_if. 2016-06-06 10:08:30 +01:00
Damien George 9b39263b11 docs: Bump version to 1.8.1. 2016-06-03 15:45:43 +01:00
puuu 3f6ca4b22c docs/esp8266/general: Add note about RTC overflow. 2016-06-03 14:37:49 +01:00
Paul Sokolovsky d8cc51ea2b docs/esp8266/quickref: Update WebREPL section for 1.8.1 release.
WebREPL is much more stable now.
2016-06-02 20:11:40 +03:00
Damien George ed4e5d2583 docs/library/index: Fix grammar and spelling in intro paragraph. 2016-06-02 11:05:13 +01:00
Marcel Stör 0b9725812e docs/wipy/tutorial: Add note about screen key bindings on OS X. 2016-06-02 00:13:21 +03:00
Paul Sokolovsky e456b2cc94 docs/README: Add some hints for PDF docs generation. 2016-06-02 00:08:47 +03:00
Paul Sokolovsky 09f764dc04 docs/library/index: Add intro paragraph regarding availability of modules.
This introductions makes explicit the fact that whenever possible,
the documentation describes full MicroPython functionality, and arbitrary
functions/classes/modules may be missing in a paricular port or build.
2016-06-02 00:08:07 +03:00
Paul Sokolovsky 9a1a49ceec esp8266/general: Typo/grammar fixes. 2016-06-01 23:16:17 +03:00
Paul Sokolovsky fdf45a718b esp8266/quickref: Use local image of Adafruit Huzzah board.
Using remote image causes problems with tools (partly because the image
is semi-firewalled and can't be accessed by arbitrary tools).
2016-06-01 23:11:49 +03:00
Paul Sokolovsky c4ab8895e8 docs: math, cmath: Add port availability information. 2016-06-01 22:12:39 +03:00
Paul Sokolovsky 1a05a59116 docs/math: Typo fix. 2016-06-01 22:09:51 +03:00
Damien George 93a9c2e840 docs/library/machine: Add documentation for machine.time_pulse_us. 2016-05-31 14:06:33 +01:00
Peter Hinch 641300dccb stmhal/dac: DAC deinit() method added. 2016-05-31 13:10:35 +03:00
Tomas R 7d4fd8b6db docs/esp8266/general: Remove duplicate phrase. 2016-05-30 19:20:11 +03:00
Damien George a3dc2c6031 docs/machine: Make disable_irq and enable_irq docs available for all. 2016-05-26 15:47:47 +01:00
mad474 eaecc4c02e docs/esp8266/general: Grammar fixes. 2016-05-23 23:33:23 +03:00
Paul Sokolovsky 3e33aeb0db docs: esp8266: Include ussl module in the docs. 2016-05-22 23:57:26 +03:00
Paul Sokolovsky bca4c9e465 docs/ussl: Add basic description of axTLS-based modussl.
In particular, disclose the fact that server certificates are not
validated.
2016-05-22 23:56:22 +03:00
misterdanb a0a08b4be1 esp8266: Add APA102 serial individually controllable LEDs support.
APA102 is a new "smart LED", similar to WS2812 aka "Neopixel".
2016-05-19 22:29:11 +03:00
Paul Sokolovsky ca63c77073 docs/ustruct: Describe supported type codes. 2016-05-14 20:48:43 +03:00
Radomir Dopieralski ccb00b7724 docs/esp8266/quickstart: remove i2c examples with stop=False
Since the ``stop`` parameter has been dropped.
2016-05-14 00:02:02 +02:00
Damien George 9b4502b7e8 docs/esp8266/tutorial: Fix typo in do_connect() network example.
Fixes issue #2065.
2016-05-11 13:40:28 +01:00
Radomir Dopieralski e89413e9b0 docs/esp8266/quickref: New way to get MAC address 2016-05-10 00:31:57 +02:00
Paulus Schoutsen c156e89379 Fix ESP8266 Network tutorial
The socket should either connect to `addr` or `addr_info[0][-1]`. Not to `addr[0][-1]`.
2016-05-07 23:24:24 -07:00
Radomir Dopieralski 0c86a9471a docs/machine.UART: Filter out unimplemented UART methods from esp8266 docs. 2016-05-07 20:20:04 +03:00
Damien George 2c2fc070ec docs: Bump version to 1.8. 2016-05-03 17:32:32 +01:00
Damien George 56fd33a6dd docs/esp8266/tutorial: Change name of ESP8266 firmware to match actual. 2016-05-03 16:42:52 +01:00
Paul Sokolovsky c68c327310 docs/esp8266/tutorial/repl: Reword description of initial WebREPL setup a bit. 2016-05-03 18:40:16 +03:00
Paul Sokolovsky 1f396c58d9 docs/esp8266/tutorial/repl: Suggest using hosted WebREPL client.
At http://micropython.org/webrepl .
2016-05-03 18:35:43 +03:00
Damien George 5d05993f10 esp8266/tutorial: Mention that esptool is available via pip. 2016-05-03 14:05:50 +01:00
Damien George 8af64bcf2b docs/esp8266/tutorial: Update pins tutorial to reflect changes in API. 2016-05-03 13:56:15 +01:00
Damien George 5036b6ad18 docs/library/machine.Pin: Update pin docs to reflect ESP8266 support. 2016-05-03 13:55:37 +01:00
Paul Sokolovsky 81a99eb388 docs/machine: idle() description generalization. 2016-05-03 12:53:57 +03:00
Paul Sokolovsky bb6458bf43 docs/machine: More generic description of sleep's, WiPy details to its genref. 2016-05-03 12:48:20 +03:00
Paul Sokolovsky db99ae00a2 docs/machine: Move WiPy-specific hardware details to its general reference. 2016-05-03 12:26:55 +03:00
Paul Sokolovsky 06ec96b47b docs/machine: Generalize docs from just WiPy to other ports. 2016-05-03 12:15:29 +03:00
Damien George 879bc4197a docs/esp8266: Add ESP8266 tutorial. 2016-05-03 01:39:04 +01:00
Paul Sokolovsky a6cf45864f docs/network: esp8266: MAC address is set via .config() method. 2016-05-03 01:04:40 +03:00
Paul Sokolovsky ae845f13de docs: Use getaddrinfo() result in easy way.
Instead of extracting 4th element, extact last. Much easier to remember!
2016-05-03 00:48:04 +03:00
Paul Sokolovsky 5302c3e8c4 docs/esp8266_contents: Referebce general and tutorial docs. 2016-05-02 17:45:42 +03:00
Paul Sokolovsky a22aa53ef1 docs/esp8266/general: Add "Boot process" section. 2016-05-02 17:41:08 +03:00
Paul Sokolovsky 12144e8fcd docs/esp8266/general: Add techspec section.
Link to vendor forum with datasheets, etc. is provided, as well as inline
TTX.
2016-05-02 17:12:25 +03:00
Paul Sokolovsky 0f682f1ee1 docs/esp8266/general: Fix list formatting. 2016-05-02 16:10:48 +03:00
Paul Sokolovsky 5aa4db0505 docs/esp8266/general: Add more points to "Multitude of boards" section. 2016-05-02 16:00:44 +03:00
Paul Sokolovsky 74c6363b97 docs/esp8266/general: WebREPL is described in quickref for now. 2016-05-02 15:26:40 +03:00
Damien George c816b89353 docs/library/machine.I2C: Update to reflect ESP8266 implementation.
This machine.I2C documentation is now closer to a more port-neutral
description, although there are still differences between WiPy and
ESP8266.
2016-05-02 12:31:17 +01:00
Paul Sokolovsky 621c644205 docs: _io and _collections were renamed to have standard "u" prefix. 2016-05-02 14:02:54 +03:00
Damien George 70ff7350e7 stmhal, cc3200: Change i2c.scan() method to scan addresses 0x08-0x77.
A standard I2C address is 7 bits but addresses 0b0000xxx and 0b1111xxx
are reserved.  The scan() method is changed to reflect this, along with
the docs.
2016-05-02 11:15:36 +01:00
Paul Sokolovsky 8ebdbcfb27 docs: Add _io module reference. 2016-05-02 00:39:36 +03:00
Paul Sokolovsky 348caaf940 docs: Add _collections module reference. 2016-05-02 00:36:58 +03:00
Paul Sokolovsky fd283eba64 docs/sys: Describe sys.platform is port-neutral manner. 2016-05-01 14:39:38 +03:00
Paul Sokolovsky e9b7610748 docs/sys: Describe sys.maxsize. 2016-05-01 14:31:08 +03:00
Paul Sokolovsky 59603a2e89 docs/sys: Describe sys.implementation. 2016-05-01 13:59:34 +03:00
Paul Sokolovsky 4fb9452bff docs/sys: Clean up print_exception() description. 2016-05-01 13:44:06 +03:00
Paul Sokolovsky ad2889c141 docs/sys: Clarify description of sys.exit(). 2016-05-01 13:42:36 +03:00
Paul Sokolovsky 8ad1659f68 docs/sys: Make module variable descriptions proper sentences. 2016-05-01 13:38:45 +03:00
Paul Sokolovsky 7781caf8d3 docs/sys: Remove port-specific details from description of stdin/out/err. 2016-05-01 13:37:28 +03:00
Paul Sokolovsky c468fe65c5 docs/ustruct: Fix argument formatting.
Per current CPython docs conventions, arguments are in italics. Follow
that.
2016-05-01 13:34:16 +03:00
Paul Sokolovsky a9ed42b3b4 docs/sys: Document sys.modules. 2016-05-01 13:32:15 +03:00
Paul Sokolovsky 6b6acc5b5d docs/ustruct: Document pack_into(), unpack_from(). 2016-05-01 13:17:07 +03:00
Paul Sokolovsky d46cd02d95 docs/esp8266/quickref: Add info about WebREPL. 2016-05-01 11:41:46 +03:00
Paul Sokolovsky 83e99f88cb docs/utime: Clarify module purpose. 2016-05-01 01:48:30 +03:00
Paul Sokolovsky 613fd0a1ca docs/library/utime: Elaborate on epochs and calendar time maintenance. 2016-05-01 00:16:47 +03:00
Damien George 348edad888 docs/esp8266: Update quickref to reflect changes to 1-wire and NeoPixel. 2016-04-28 14:31:37 +01:00
Damien George 37d5aa1377 docs: Make the short port names in the port/version sidebar lowercase.
To make it neater and simpler.
2016-04-28 12:34:59 +01:00
Paul Sokolovsky 6d8156ae28 docs/network: esp8266: Describe wlan.config() method. 2016-04-28 00:11:55 +03:00
Paul Sokolovsky 06deec9d35 docs/network: esp8266: Add wlan.ifconfig() method. 2016-04-28 00:10:29 +03:00
Paul Sokolovsky 1b45670c69 docs/ubinascii: Clean up grammar. 2016-04-27 15:47:33 +03:00
Paul Sokolovsky df4e1d1279 docs/library: Consistently use admonitions for CPython differences. 2016-04-27 15:43:48 +03:00
Paul Sokolovsky 31300b5144 docs/utime: Describe sleep() peculiarities in MicroPython.
Not all ports accept floating-point value.
2016-04-27 15:28:46 +03:00
Paul Sokolovsky c564169c8f docs/utime: Describe time() peculiarities in MicroPython. 2016-04-27 15:23:11 +03:00
Damien George 556e5dfd35 docs/library/utime: Add more time functions for unix and esp8266 ports. 2016-04-27 12:30:59 +01:00
Damien George e0f7e001e8 docs: Fix uos and utime heading underlines to be the correct length.
Otherwise Sphinx gives a warning.
2016-04-27 12:11:27 +01:00
Paul Sokolovsky 351ec6d4ab docs/library: "os" module is actually "uos". 2016-04-27 01:55:06 +03:00
Paul Sokolovsky f3f5e975e4 docs/Makefile: Default BUILDDIR based on MICROPY_PORT.
It doesn't make sense to duplicate both on command line, and MICROPY_PORT
is effectively mandatory to build docs.
2016-04-27 01:50:05 +03:00
Paul Sokolovsky 0df2ee0126 docs/library/index: Order sections from the most to least standard modules. 2016-04-27 01:38:59 +03:00
Paul Sokolovsky 492bf12499 docs/library/index: Make single section for "micro-ified" modules.
Even the modules whose names don't start with "u" prefix are micro-ified
anyway, i.e. provide only subset of CPython's functionality (and sometimes
extensions to it). So, it doesn't make much sense to devide them by
criteria of having/not having "u" prefix.
2016-04-27 01:38:59 +03:00
Paul Sokolovsky 678f3a1e05 docs: Module "time" is actually "utime". 2016-04-27 01:38:59 +03:00
Paul Sokolovsky a119983328 docs/library/index: esp8266 has the same set of stdlibs as pyboard/unix. 2016-04-27 01:17:28 +03:00
Paul Sokolovsky 88ed518390 docs/library/index: Move WiPy "micro-libraries" under corresponding heading. 2016-04-27 01:14:16 +03:00
Paul Sokolovsky 8b8c32c09b docs/library: Group MicroPython-specific modules under separate heading. 2016-04-27 01:11:24 +03:00
Paul Sokolovsky 650df97c06 docs/network: esp8266: scan(): Add note that bssid is bytes object. 2016-04-26 01:09:11 +03:00
Paul Sokolovsky 0d10e5310a docs/usocket: Describe address format once at the beginning.
Different ports may have different formats.
2016-04-23 00:31:05 +03:00
Paul Sokolovsky 92497bff94 docs/usocket: socket.IPPROTO_SEC is WiPy-specific. 2016-04-23 00:17:34 +03:00
Paul Sokolovsky 955b8526f4 docs/usocket: Socket-specific exceptions are for WiPy only. 2016-04-23 00:17:09 +03:00
Paul Sokolovsky 71c6f93016 docs/library/usocket: Add link to CPython's socket module. 2016-04-23 00:08:43 +03:00
Paul Sokolovsky bbe5245028 docs: esp8266: Include usocket module reference. 2016-04-23 00:08:11 +03:00
Paul Sokolovsky 3bc9b571bb docs/ustruct: There's no complete "struct" module, only "ustruct" subset.
"ustruct" is good example of micro-ified module, so rather should belong
to the corresponding list.
2016-04-22 22:37:14 +03:00
Paul Sokolovsky 5c8147528e docs/esp8266/tutorial: Add tutorial placeholder page. 2016-04-22 22:37:02 +03:00
Damien George fcc9d43c6d docs/esp8266: Add info about using deep-sleep mode to quickref. 2016-04-21 12:01:50 +01:00
Paul Sokolovsky 2a51f72ed1 docs/esp8266/general: Start "General information" for esp8266. 2016-04-21 01:03:51 +03:00
Paul Sokolovsky f73d78394b docs/topindex.html: esp8266: Enable quickref/general on the main page. 2016-04-21 01:03:27 +03:00
Paul Sokolovsky 67ece47121 docs/machine: reset_cause() has been implemented for esp8266. 2016-04-17 17:40:08 +03:00
Paul Sokolovsky 53ac7830cb docs/speed_python: Add article. 2016-04-15 20:09:59 +03:00
Paul Sokolovsky 5801967496 docs/speed_python: Add many more details on memoryviews. 2016-04-15 18:18:18 +03:00
Paul Sokolovsky 47f9b10b30 docs/speed_python: Generalize "Floating point" subsection.
Don't describe just single port's peculiarities, note aboute possible
array of issues with floating-point.
2016-04-15 17:43:03 +03:00
Paul Sokolovsky 6c84f1e03a docs/speed_python: Clarify/generalize "Buffers" subsection. 2016-04-15 17:24:56 +03:00
Paul Sokolovsky f474e956d7 docs/machine: Start to update for esp8266 port. 2016-04-15 17:06:11 +03:00
Paul Sokolovsky b122ed0732 docs/esp: Enumerate flash access functions. 2016-04-15 14:01:22 +03:00
Peter Hinch 22cbcd55f0 stmhal: Properly handle RTS/CTS flow control for buf/unbuf transfers.
Fixes issues #1912 and #1913.  UART documentation is also updated.
2016-04-13 08:42:32 +01:00
Damien George 9b0a150bd6 docs: Bump version to 1.7. 2016-04-11 12:18:10 +01:00
Paul Sokolovsky 9c04299da1 docs: esp8266: Enable "machine" module docs.
The docs are still heavily biased towards WiPy, so will need a lot of
exclusions.
2016-04-07 16:44:10 +03:00
Paul Sokolovsky 5e7fa7c80c docs/ubinascii: Document non-standard "sep" argument to hexlify(). 2016-04-07 12:39:00 +03:00
Paul Sokolovsky e4cb7c6158 docs/esp8266/quickref: Add note about physical vs logical pin numbers. 2016-04-05 16:30:51 +03:00
Paul Sokolovsky f81ea6307c docs/ubinascii: Document a2b_base64(), b2a_base64(). 2016-04-05 14:00:12 +03:00
Paul Sokolovsky 28d4b94dce docs/machine: Change wording to be a bit more port-neutral. 2016-04-03 20:49:29 +03:00
Paul Sokolovsky 69b702276b docs/os: Change wording to be a bit more port-neutral. 2016-04-03 20:49:25 +03:00
Paul Sokolovsky e24674d44e docs: esp8266: esp.socket is deprecated, remove from docs. 2016-04-03 20:19:39 +03:00
Paul Sokolovsky 254a5646c1 docs: Update copyright notice. 2016-04-03 00:05:23 +03:00
Paul Sokolovsky f50d9477c1 docs: network: esp8266: .scan() is now synchronous and returns result list. 2016-03-30 11:56:20 +03:00
Paul Sokolovsky d7019d0628 docs: network: esp8266: status is WLAN object method. 2016-03-30 11:53:45 +03:00
danicampora 193795398d docs: Correct pin interrupt example code for the WiPy. 2016-03-28 13:12:58 +02:00
Paul Sokolovsky 87c783b454 docs/esp8266: esp.mac() replaced with network.WLAN.mac(). 2016-03-27 06:59:39 +03:00
Paul Sokolovsky 679fe0abae docs/esp8266: esp.wifi_mode() replaced with network.WLAN.active(). 2016-03-27 06:59:00 +03:00
Paul Sokolovsky eda8746324 docs/esp8266: phy_mode() moved to network module. 2016-03-27 06:58:06 +03:00
Paul Sokolovsky 0cb10b5220 docs/esp8266/quickref: Add note about GPIO16. 2016-03-25 16:48:15 +02:00
Paul Sokolovsky 159f1aaca8 docs/esp8266/quickref: Note that timers supported are virtual ones. 2016-03-25 16:44:13 +02:00
Paul Sokolovsky e589cddcd4 docs/esp: Remove getaddrinfo(), now in socket module as expected. 2016-03-25 16:39:18 +02:00
Paul Sokolovsky 6e6488530e docs: More standard modules for esp8266. 2016-03-25 16:33:05 +02:00
Paul Sokolovsky 4b5606bc09 docs/network: esp8266: Update docs on WLAN constructor. 2016-03-25 16:30:06 +02:00
Paul Sokolovsky ee6fcc6f91 docs: Add standard modules list for esp8266. 2016-03-25 15:17:55 +02:00
Paul Sokolovsky 96a644076d docs/topindex.html: Refer to "pyb" module only for pyboard. 2016-03-25 15:12:26 +02:00
Peter Hinch 2b302dad51 docs: Update pyb.UART.any() to mention that it returns character count. 2016-03-17 20:19:36 +00:00
Peter Hinch 6d5a549067 docs: Mention that pyb.SPI constructor accepts "X" and "Y" arguments. 2016-03-17 20:19:08 +00:00
Peter Hinch b8133c4c0f docs: Update pyb.I2C constructor to reflect changes in Pyboard Lite. 2016-03-17 20:18:36 +00:00
Peter Hinch 4a6cac4643 docs: Update asm tutorial, maximum number of allowed args is now 4. 2016-03-17 20:17:40 +00:00
Damien George 2466cb67f8 docs/esp8266: Update quick reference: i2c.readfrom and neopixel example. 2016-03-16 13:37:39 +00:00
Peter Hinch 21b74604f9 docs: Add Python speed optimisation guide, including minimal viper ref. 2016-03-11 16:33:36 +00:00
Peter Hinch 85d3b6165a docs: Update details on using ADCAll object for vref/vbat channels. 2016-03-11 16:33:09 +00:00
Peter Hinch 70f32f0f73 docs: Update asm_thumb2_hints_tips re return type of asm funcs. 2016-03-11 16:32:42 +00:00
Damien George 6b80ebe32e docs/esp8266: Fix indent errors, typos, and add info about REPL UART. 2016-03-09 13:01:32 +00:00
Damien George 42ef5a1567 docs: Allow list of versions to be specified by environment variable. 2016-03-09 12:43:22 +00:00
Damien George 5b74bba3a3 docs: Add versions.html template and support code for a version sidebar. 2016-03-09 12:15:47 +00:00
Damien George 4b6077b3fe docs/esp8266: Minor tweaks to quickref, Timer and I2C classes. 2016-03-09 11:02:38 +00:00
Damien George 809fbeefb7 docs: Add esp8266 quick reference page, with basic info. 2016-03-08 23:06:15 +00:00
Noah Rosamilia 6bb9d3ea3e docs/uctypes.rst: Fix typo (steamlined -> streamlined). 2016-03-02 00:25:10 +02:00
danicampora 57b96a7be2 docs: Correct machine.Timer code examples related to duty cycle. 2016-02-23 20:22:26 +01:00
danicampora 8e1fdf2eb3 docs: Add note on machine.Timer class regarding PWM output pins. 2016-02-23 19:53:59 +01:00
danicampora add930c4b5 cc3200: Rename 'server' class to 'Server' for consistency. 2016-02-22 22:54:34 +01:00
danicampora 12547ce737 docs: Minor change to improve clarity in machine.Timer docs. 2016-02-22 19:16:30 +01:00
danicampora 0d210a0be8 docs: Correct WiPy Timer docs. 2016-02-21 21:53:20 +01:00
danicampora 73c9f85b4c cc3200: Simplify the Timer API and correct the documents.
Make the PWM duty cycle configurable from 0.00 to 100.00 by
accepting values from 0 to 10000.
Add automatic Pin assignment when operating in PWM mode.
2016-02-21 21:53:16 +01:00
Damien George 331a48195d docs: Bump version to 1.6. 2016-01-31 23:22:41 +00:00
Damien George 0f87a010e3 docs: Update to say that Timer(3) is free, and detail LED intensity. 2016-01-29 23:06:13 +00:00
Peter Hinch c13b2f2d00 docs: Several minor changes: network, pyb, ADCAll and inline asm. 2016-01-13 21:53:26 +00:00
Damien George ea8be373a9 py/inlinethumb: Remove 30-bit restriction on movwt instruction.
movwt can now move a full 32-bit constant into a register.
2016-01-07 16:34:11 +00:00
Henrik Sölver 67f40fb237 docs: Include extra functions in time documentation for pyboard. 2016-01-04 22:57:21 +00:00
Damien George 1d191fdf03 docs: Add link from pyboard switch tutorial to ISR rules document. 2016-01-04 16:18:44 +00:00
Paul Sokolovsky 824f83fd20 docs: Set author as 'Damien P. George and contributors'. 2016-01-03 22:17:00 +02:00
Paul Sokolovsky 275a0f25d3 docs: Fix readthedocs build by updating Latex params. 2016-01-03 22:15:07 +02:00
Damien George ed584e2ffd docs: Bump version to 1.5.2. 2015-12-31 14:43:19 +00:00
Peter Hinch 521759ee18 docs: Add discussion on interrupt handlers incl uPy specific techniques. 2015-12-31 00:02:09 +00:00
danicampora 67a5bfc6d8 docs/library: Add network server example. 2015-12-16 22:35:14 +01:00
Damien George 4dea24e105 docs: Bump version to 1.5.1. 2015-11-23 21:27:33 +00:00
Chris Liechti 426f326d35 docs/wipy: Make wifi/wlan naming consistent with tutorial.rst. 2015-11-18 20:02:07 +01:00
Jason Hildebrand 9142179f81 docs/wipy: Add warning about losing wlan connection when changing mode.
Also provide workarounds, link to other revelant sections,
and fix some typos.
2015-11-18 19:55:55 +01:00
Noah 00960133c2 docs: Update docs for WiPy wlan.connect().
- The link establishment timeout is infinite by default
- Fix typo in notes about the auth kwarg
2015-11-18 19:47:40 +01:00
Dave Hylands f3308daa6f docs/wipy: Fixed some typos in the WiPy's tutorials. 2015-11-18 19:40:29 +01:00
Dave Hylands 3551368424 docs: Fix a typo in the REPL documentation. 2015-11-10 22:19:20 +02:00
Paul Sokolovsky 549c79d11e docs/select: Document POLLIN/OUT/ERR/HUP. 2015-11-09 22:10:32 +02:00
Damien George b7ca945877 lib/mp-readline: Make it easy to exit auto-indent mode by pressing enter.
This patch allows you to stop auto-indent by pressing enter on a second
blank line.  Easier than having to use backspace, and prevents new users
from getting stuck in auto-indent mode.
2015-11-07 13:07:43 +00:00
Dave Hylands a9f3030371 docs: Add docs about REPL paste-mode and Control-C 2015-11-03 23:28:53 +00:00
Dave Hylands 98fb0bf68a docs: Move instructions on generating the documentation to docs/README.md 2015-11-03 23:28:27 +00:00
Paul Sokolovsky 43efb46328 docs/library/index.rst: Minimally adapt for unix port. 2015-10-31 01:15:25 +03:00
Paul Sokolovsky c6bc5b69c2 docs: Actually add unix port indexes, so docs for it could be generated. 2015-10-31 01:00:03 +03:00
Paul Sokolovsky 98b6d35c4f docs: select: Describe poll.poll() return value in detail. 2015-10-29 22:08:10 +03:00
danicampora 9011815d86 docs/wipy: Fix bug in example code and add note regarding OTA. 2015-10-26 23:51:27 +01:00
Martijn Koster a13d22f921 docs/wipy: Fix several typos and change some pyboard to WiPy. 2015-10-26 23:36:51 +01:00
Martijn Koster c773053f58 docs/wipy: Fix several typos. 2015-10-25 21:32:18 +01:00
danicampora 359a8aa760 docs/wipy: Fix error in WLAN quickref. 2015-10-25 21:31:42 +01:00
Paul Sokolovsky b7ab70c71c docs: USB_VCP: Always in non-blocking mode, clarify stream method returns.
They return None if no data available.
2015-10-25 13:24:29 +03:00
Paul Sokolovsky cf6daa0966 docs: Explicitly specify behavior of UART stream protocol methods on timeout. 2015-10-25 08:25:34 +03:00
danicampora ee7bebc94f docs: Correct machine.RTC examples. 2015-10-22 20:23:28 +02:00
danicampora 4efed58df1 docs: Fix typos on wipy docs. 2015-10-22 16:35:04 +02:00
danicampora 9273cca432 docs/wipy: Correct typo in safe boot description. 2015-10-22 00:31:22 +02:00
danicampora 126373ac70 docs/wipy: Remove windows instructions that refer to the pyboard. 2015-10-21 23:22:16 +02:00
danicampora e954604ae0 docs: Add remark about ssl sockets and standard sockets. 2015-10-21 22:52:36 +02:00
Damien George fe08e3a54f docs: Bump version to 1.5. 2015-10-21 16:58:52 +01:00
danicampora 3b24e83731 docs/wipy: Fix formatting indentation. 2015-10-21 15:43:02 +02:00
danicampora bb489066e8 docs/wipy: Remove incorrect references to usb configuration. 2015-10-21 15:41:36 +02:00
danicampora 109b363ddc docs/wipy: Add more tutorials and examples. 2015-10-21 15:30:57 +02:00
danicampora ee0058d174 docs: Remove remaining references to 'af', which is now 'alt'. 2015-10-21 15:30:57 +02:00
danicampora ceb169008d docs: Several corrections to the classes in the machine module. 2015-10-21 15:30:56 +02:00
danicampora 04db848dc7 docs: Add usocket and ussl modules' documentation. 2015-10-21 15:30:56 +02:00
danicampora 9c72c71c05 cc3200: WLAN class can retrieve the existing instance. 2015-10-19 21:17:15 +02:00
danicampora 8faf2dc75b docs/wipy: Add wipy tutorials section. 2015-10-19 21:17:15 +02:00
danicampora 36ae417c9f docs: Add wipy and network.server documentation. 2015-10-19 21:17:15 +02:00
danicampora 020386b61c docs: In top index fix machine module link for the WiPy. 2015-10-18 00:31:12 +02:00
danicampora 4542643025 docs: Update all WiPy docs to reflect the new API. 2015-10-17 23:29:04 +02:00
Damien George d6442407f5 docs: Fix formatting of DAC code examples. 2015-10-13 14:44:00 +01:00
Damien George b5c43be135 stmhal: Allow to set bits resolution for DAC; 8 is default, can have 12.
This patch allows to configure the DAC resolution in the constructor and
in the init function, eg:

dac = DAC(1, bits=12).

The default resolution is 8 bits for backwards compatibility.  The bits
sets the maximum value accepted by write and write_timed methods, being
2**bits - 1.

When using write_timed with 12-bit resolution, the input buffer is
treated as an unsigned half-word array, typecode 'H'.

See PR #1130 for discussion.
2015-10-13 14:33:04 +01:00
Damien George 845b5a2a58 docs: Describe properly how MCU can be woken from pyb.standby() state. 2015-10-10 00:03:14 +01:00
Radomir Dopieralski 37ab061f4d docs: Update esp8266 documentation to match the code.
* Move the esp.status() to network module.
* Describe the wifi.isconnected() method.
* Describe esp.mac(), esp.wifi_mode(), esp.phy_mode(), esp.sleep_type(),
  esp.deepsleep(), and esp.flash_id() functions.
2015-10-06 23:25:35 +01:00
Damien George 5572f735b6 docs: Bump version to 1.4.6. 2015-09-23 17:16:22 +01:00
Daniel Campora dffa9f6da6 cc3200: New SD and RTC API plus os and time modules' extensions. 2015-09-21 22:30:32 +02:00
Daniel Campora 861fad5819 docs: Adapt WiPy's ADC doc and quickref to the new API. 2015-09-16 10:10:40 +02:00
Daniel Campora aba75e1233 cc3200: New SPI API. 2015-09-16 10:10:33 +02:00
Daniel Campora 624cdeacc4 docs/wipy: Add pins to the I2C constructor. 2015-09-16 10:10:31 +02:00
Daniel Campora 41f6948545 cc3200: New WDT API. 2015-09-16 10:10:29 +02:00
Daniel Campora 8332044f75 cc3200: Add UART.ODD and UART.EVEN to select parity. 2015-09-16 10:10:26 +02:00
Daniel Campora d5ec336eef cc3200: Replace Pin.PULL_NONE with None. 2015-09-16 10:10:24 +02:00
Daniel Campora f38d16483a docs: Update I2C and UART docs to match the new API. 2015-09-16 10:10:22 +02:00
Daniel Campora f91f212d9f cc3200: New UART API plus related test. 2015-09-10 07:59:47 +02:00
Daniel Campora 36821d095a cc3200: Add alternate functions list to Pin object.
Also remove pin.high() and pin.low() methods.
2015-09-10 07:59:41 +02:00
Daniel Campora d5e256486e cc3200: Re-work Pin class according to the new API.
Also add relevant test.
2015-09-10 07:59:35 +02:00
Daniel Campora aa8e8acb7d cc3200: Change HeartBeat period from 5 to 4 seconds. 2015-08-16 20:18:09 +02:00
Daniel Campora 11d21081b4 cc3200: Rework SD API. Increase heap to avoid malloc failures. 2015-08-16 20:17:58 +02:00
Daniel Campora 34c290b678 cc3200: Rename SPI nss param to cs.
The nss param in the pyboard has a different meaning that doesn't
apply to the WiPy.
2015-08-16 20:17:55 +02:00
Daniel Campora ea5061e409 cc3200: Improve callback API.
Rename "wakes" param to "wake_from" and make "value" an object
instead of an integer.
2015-08-16 20:17:52 +02:00
Damien George 032b0e9369 docs: Bump version to 1.4.5. 2015-08-11 13:42:30 +01:00
Daniel Campora 7027fd5343 cc3200: Make ADC API compatible with the pyboard. 2015-08-10 23:42:05 +02:00
Daniel Campora 31f6a6fa70 cc3200: Enable bootloader safe boot on latest firmware.
The first safe boot level executes the latest firmware but skips
'main.py' and 'boot.py'.
2015-08-09 19:22:19 +02:00
Daniel Campora e54a4f1f48 cc3200: Improve support for WEP security.
Key is always entered as a string, but if security is WEP, the key
is converted automatically to hex before connecting or configuring
the device as an AP.
2015-08-09 19:22:16 +02:00
Daniel Campora d43019163d docs: Add i2c keywork arguments only indication. 2015-08-09 19:22:14 +02:00
Daniel Campora 00c4d6562e cc3200: Add nic.iwconfig() to set/get WLAN configuration.
Changes are based on this post:
https://github.com/micropython/micropython/issues/876#issuecomment-115255551

The constructor can optionally take the same params of iwconfig in
order to configure WiFi when creating the object. Params are
keyworkd only. The WiPy accepts:

- mode (int -> WLAN.AP or WLAN.STA)
- ssdi (string)
- security (int -> WLAN.OPEN, WLAN.WEP, WLAN.WPA, WLAN.WPA2)
- key (string)
- channel (int (1-11))
- antenna (int -> WLAN.INTERNAL, WLAN.EXTERNAL)
2015-08-09 19:22:12 +02:00
Daniel Campora c6926c374d cc3200: Make I2C and SPI API the same as in stmhal. 2015-08-02 20:22:15 +02:00
Daniel Campora aa58c7ec74 cc3200: Append last 2 bytes of the MAC address to the default SSID. 2015-07-30 00:43:16 +02:00
Daniel Campora da33b31c7d docs/wipy: Correct nic.ifconfig() quickref example. 2015-07-30 00:43:11 +02:00
Daniel Campora 007878781c cc3200: Rename pins from GPIO to just GP.
This is how the names will be printed on the sticker that goes on top
of the EMI shield. The shorter names also help saving a few bytes of
RAM and ROM.
2015-07-30 00:43:08 +02:00
Damien George 7693ef3bd6 stmhal: Allow ADC.read_timed to take Timer object in place of freq.
This allows a user-specified Timer for the triggering of the ADC read,
mirroring the new behaviour of DAC.write_timed.

Addresses issue #1129.
2015-07-22 19:41:13 +01:00
Damien George abc24c1876 stmhal: Allow DAC.write_timed to take Timer object in place of freq.
This allows the DAC to use a user-specified Timer for the triggering
(instead of the default Timer(6)), while still supporting original
behaviour.

Addresses issues #1129 and #1388.
2015-07-21 23:39:49 +01:00
Daniel Campora e955089da0 cc3200: Implement new OTA mechanism with 2 firmware update slots. 2015-07-15 14:25:28 +02:00
Damien George 7463442e58 docs: Update pyb.Accel doc to reflect changes and explain filtered_xyz. 2015-07-08 11:10:51 +01:00
Daniel Campora 5161239c9f cc3200: time.sleep() now receives seconds, like CPython. 2015-07-02 17:23:22 +02:00
Daniel Campora bdf958df30 docs/wipy: Update safe boot comments to match actual behaviour. 2015-06-30 22:27:50 +02:00
Daniel Campora 813b581127 cc3200: Add `Pin.name()` method. 2015-06-28 14:14:22 +02:00
Damien George fa1cdb09fc docs: Fix duplicate label error for network.WLAN. 2015-06-27 13:42:00 +01:00
Damien George 8cc8f280eb docs: Make index link point to "index.html" irrespective of port. 2015-06-27 13:41:24 +01:00
Damien George abfd4da287 docs: Add link from pyboard asm tutorial to asm reference. 2015-06-26 12:35:17 +01:00
Damien George 0d3e309ebc docs: Add link in references index to Thumb2 assembler docs. 2015-06-25 00:24:19 +01:00
Damien George 2110dc5a6d docs: Add reference for Thumb2 inline assembler.
Thanks to Peter Hinch for contributing this.
2015-06-25 00:21:35 +01:00
Damien George aef3846c13 docs: Add "reference" directory for putting docs about the language. 2015-06-25 00:20:57 +01:00
Bill Owens 7c61249ae6 esp8266: Updated documentation for scan() and moved to network 2015-06-17 23:16:28 +03:00
Daniel Campora ea2cc2b907 docs: Add more documentation for the CC3200 in the pyb module. 2015-06-16 15:45:24 +02:00
Damien George e78a8c94b6 docs: Bump version to 1.4.4. 2015-06-15 23:54:22 +01:00
Radomir Dopieralski 05c6fbcae6 esp8266: Fix the documentation for esp.connect() and esp.disconnect()
Since the commit that moved those two functions failed to update
the documentation, this is a fix for that.
2015-06-13 23:03:06 +03:00
Daniel Campora cfcf47c064 docs: Add initial draft documentation for the WiPy.
This makes all common files "port-aware" using the .. only directive.
2015-06-10 23:37:56 +02:00
Paul Sokolovsky 06e85ecfa6 docs/uctype: Update for constructor argument order changes.
Also, other small cleanups/improvements.
2015-06-06 22:58:04 +03:00
Damien George 3eece29807 docs: Change "Micro Python" to "MicroPython" in all places in docs. 2015-06-04 23:53:26 +01:00
Damien George 601cfea6a3 docs: Update license date range to include 2015. 2015-06-04 23:47:10 +01:00
Daniel Campora 7ca1bd314b docs: Generate a separate docs build for each port.
Using Damien's approach where conf.py and topindex.html are
shared by all ports.
2015-06-04 23:44:35 +01:00
Paul Sokolovsky 32ce72cb9e docs/uctypes: Typo fix. 2015-06-02 10:35:06 +03:00
Paul Sokolovsky f8bce131c0 docs/uctypes: Fix API description errors.
"Structure class" is its descriptor, encoded as a dictionary. Then,
uctypes.struct() instantiates an actual object, and thus requires memory
address.
2015-06-02 10:30:01 +03:00
Radomir Dopieralski 78ccb44a90 docs: Document esp module for ESP8266.
I document as much as I could guess from experiments and reading the
code for the ``esp`` module for the ESP8266 port of Micropython.

For now the tag has to be set manually with -t option when building,
when we have properly split documentation, there will be a separate
config file for esp8266 with that the tag "port_esp8266" set.

To build use:

make SPHINXOPTS="-t port_esp8266" html
2015-05-30 12:49:58 +01:00
Dave Hylands 3ad94d6072 extmod: Add ubinascii.unhexlify
This also pulls out hex_digit from py/lexer.c and makes unichar_hex_digit
2015-05-20 09:29:22 +01:00
Damien George d7b7d5f6ee docs: Bump version to 1.4.3. 2015-05-16 21:26:43 +01:00
Damien George 0bfc57022d docs: Document USB_VCP file-like methods. 2015-05-13 20:42:12 +01:00
Steve Zatz c7df9c6c47 stmhal: Add os.rename function. 2015-05-12 23:43:11 +01:00
blmorris 5df81de7af sthmal/rtc.c: Add calibration() method to get/set RTC fine-tuning value. 2015-05-11 23:48:39 +01:00
Damien George dea853d3a3 docs: Document pyb.stop, pyb.standby and pyb.RTC.wakeup. 2015-04-21 22:35:17 +01:00
Damien George 43d56f9ba9 docs: Bump version to 1.4.2. 2015-04-21 12:51:14 +00:00
Henrik e3cd154317 stmhal: Add support for sending and receiving CAN RTR messages. 2015-04-18 14:53:00 +01:00
Damien George 7d5e34287c stmhal: Allow sending CAN messages with timeout=0.
Thanks to Henrik Sölver for this patch.
2015-04-16 23:52:43 +01:00
Damien George feff00e1a5 Add .gitattributes file to force text line endings to LF.
Some files are excluded, otherwise a whole lot of files need converting.
2015-04-16 22:23:56 +01:00
Damien George e97dddcdca docs: Document pyb.main function to set main script. 2015-04-09 10:08:25 +01:00
Damien George 0f6424efda docs: Bump version to 1.4.1. 2015-04-04 17:41:11 +01:00
Paul Sokolovsky 344057ac50 docs: uctypes: Bullet list formatting fixes. 2015-03-31 01:29:07 +03:00
Paul Sokolovsky 9d2c0c231c docs: uctypes: Describe how to instantiate struct objects. 2015-03-31 01:16:14 +03:00
Ivan Pejić e178ef2520 docs: Add additional example/note for Timer's callback usage.
Add example: using named function for the Timer's callback.
Add note: improving traceback inside interrupt timers.
2015-03-30 00:43:04 +01:00
Damien George 47098efbda docs: Provide initial documentation for micropython module. 2015-03-30 00:32:29 +01:00
Damien George 64e8b62291 docs: Bump version to 1.4. 2015-03-29 18:01:19 +01:00
Paul Sokolovsky c260836beb docs: uctypes: Describe bytes_at(), bytearray_at(). 2015-03-27 00:19:23 +02:00
Paul Sokolovsky ec1b1cf834 docs: uctypes: Describe couple more functions. 2015-03-24 22:42:54 +02:00
Dave Hylands b4c9a25eab stmhal: Add support for quadrature encoder mode to pyb.TimerChannel. 2015-03-09 13:23:14 +00:00
Peter Hinch b57b56f293 docs: Update pyb.Timer.rst to fix pulse widths that exceed the period. 2015-03-09 12:14:32 +00:00
Damien George 4fddbe5ab6 docs: Correct the documentation for math.frexp. 2015-02-23 22:15:11 +00:00
Damien George 1babb6d0c7 docs: Update timer tutorial to reflect new behaviour of timer. 2015-02-23 22:14:54 +00:00
Paul Sokolovsky 3527085587 pyb.UART.rst: Clean up note about stream protocol support. 2015-02-22 13:36:35 +02:00
Damien George 77fc276c08 stmhal: For UART, check that baudrate is within 5% of desired value.
Also includes documentation about minimum baudrate.

Addresses issue #1090.
2015-02-22 00:26:49 +00:00
Henrik Sölver f80f1a7077 stmhal: Add support for CAN rx callbacks. 2015-02-15 03:10:53 +00:00
Damien George baafb290ad stmhal: Add uart.sendbreak() method, to send a break condition. 2015-02-13 19:04:24 +00:00
Damien George d39c7aa517 stmhal: Add Python-configurable USB HID mode.
Different HID modes can be configured in Python.  You can either use
predefined mouse or keyboard, or write your own report descriptor.
2015-02-13 14:02:51 +00:00
Damien George 79dc0a0886 docs: Bump version to 1.3.10. 2015-02-13 13:26:44 +00:00
Damien George 552f7c40a0 docs: Bump version to 1.3.9. 2015-01-25 00:10:07 +00:00
Damien George 73533247cb docs: Fix frequency info for DAC.triangle. 2015-01-20 23:56:10 +00:00
Damien George 3990dcfcd7 docs: Add note about maximum frequency of busses. 2015-01-08 22:54:26 +00:00
Paul Sokolovsky 7a0636e80a docs: Add initial "uctypes" modules docs. WIP. 2015-01-08 00:17:10 +02:00
Damien George b27c9876ea docs: For Windows USB CDC driver setup, add link to existing PDF guide. 2015-01-06 16:09:49 +00:00
Damien George ddbcc79550 docs: Add quickref info about Servo; improve Servo docs. 2015-01-01 18:00:45 +00:00
Radomir Dopieralski ce5b5caf8c Add a command for converting the WAV files
Add a command for converting the WAV files to the amp skin tutorial, so that people can use their own files easily.
2015-01-01 17:56:05 +00:00
Damien George 96e22154d7 docs: Bump version to 1.3.8.
Should have done it before tagging...
2014-12-29 00:04:59 +00:00
Damien George 7690b13953 stmhal: Add ability to mount custom block device. 2014-12-27 20:20:51 +00:00
Dave Hylands 90cd6cd987 docs: Add mention about using USB charger when resetting the filesystem.
It seems the Mac will happily wipe out at least some of the data on
a freshly reset filesytem, if the filesystem was reset while plugged
into the Mac.
2014-12-23 13:22:32 +00:00
Damien George a37656c132 docs: Make admonition for CPy-difference use "attention" class.
This renders it in yellow/orange box on RTD server.
2014-12-22 13:42:30 +00:00
Damien George 7b80d908bf docs: Add RTD local_settings file, to add custom templates. 2014-12-21 11:21:06 +00:00
Damien George 9b561a7c0d docs: Add custom CSS file, with code for admonition. 2014-12-21 00:22:49 +00:00
Damien George 6d3ae569cf docs: Add CPy diff note for print_exception; embellish sys.platform. 2014-12-19 22:10:38 +00:00
Gregory 5cf7ac7309 Fix leds.rst
N (mod 4) is 0..3
2014-12-18 00:06:48 +03:00
Damien George 9642846d71 docs: Define more clearly the behaviour of LED methods.
Addresses issue #1006.
2014-12-16 11:55:46 +00:00
Paul Sokolovsky 6c3fc74656 docs: Add sys.print_exception(). 2014-12-10 20:31:38 +02:00
Damien George b66a31c42c stmhal: Allow SPI.init to specify prescaler directly; improve SPI docs. 2014-12-08 21:34:07 +00:00
Damien George 008251180d stmhal: Enhance pyb.freq to configure bus (AHB, APB1, APB2) freqs.
This is useful if you need precise control over the speed of
peripherals (eg SPI clock).
2014-12-08 21:32:55 +00:00