Commit Graph

57 Commits

Author SHA1 Message Date
Damien George 0334058fa4 Rename "Micro Python" to "MicroPython" in REPL, help, readme's and misc. 2015-10-12 00:06:25 +01:00
Damien George 46a1102852 repl: Add paste mode to friendly REPL, entered via CTRL-E.
Use CTRL-E to enter paste mode.  Prompt starts with "===" and accepts
all characters verbatim, echoing them back.  Only control characters are
CTRL-C which cancels the input and returns to normal REPL, and CTRL-D
which ends the input and executes it.  The input is executed as though
it were a file.  The input is not added to the prompt history.
2015-10-11 23:30:22 +01:00
Damien George 58e0f4ac50 py: Allocate parse nodes in chunks to reduce fragmentation and RAM use.
With this patch parse nodes are allocated sequentially in chunks.  This
reduces fragmentation of the heap and prevents waste at the end of
individually allocated parse nodes.

Saves roughly 20% of RAM during parse stage.
2015-10-02 00:11:11 +01:00
Damien George c98c128fe8 pyexec: Make raw REPL work with event-driven version of pyexec.
esp8266 port now has working raw and friendly REPL, as well as working
soft reset (CTRL-D at REPL, or raise SystemExit).

tools/pyboard.py now works with esp8266 port.
2015-05-06 00:02:58 +01:00
Dave Hylands c3e37a0cde stmhal: Automatically re-enable IRQs on the USB REPL.
This allows errors to be seen and prevents hanging
the board from doing: pyb.disable_irq()
2015-04-29 08:27:38 +01:00
Damien George b7a4f15b34 mp-readline: Save "prompt" string in readline state. 2015-04-29 00:32:35 +01:00
Damien George 95f53461c2 py: Replace py-version.sh with makeversionhdr.py, written in Python.
Also rename py-version.h to mpversion.h for consistency with mpconfig.h.
2015-04-28 23:52:36 +01:00
Damien George f35b5d28db stmhal/pyexec.c: Make raw REPL mode 8-bit clean. 2015-04-19 21:30:49 +01:00
Damien George 7f9d1d6ab9 py: Overhaul and simplify printf/pfenv mechanism.
Previous to this patch the printing mechanism was a bit of a tangled
mess.  This patch attempts to consolidate printing into one interface.

All (non-debug) printing now uses the mp_print* family of functions,
mainly mp_printf.  All these functions take an mp_print_t structure as
their first argument, and this structure defines the printing backend
through the "print_strn" function of said structure.

Printing from the uPy core can reach the platform-defined print code via
two paths: either through mp_sys_stdout_obj (defined pert port) in
conjunction with mp_stream_write; or through the mp_plat_print structure
which uses the MP_PLAT_PRINT_STRN macro to define how string are printed
on the platform.  The former is only used when MICROPY_PY_IO is defined.

With this new scheme printing is generally more efficient (less layers
to go through, less arguments to pass), and, given an mp_print_t*
structure, one can call mp_print_str for efficiency instead of
mp_printf("%s", ...).  Code size is also reduced by around 200 bytes on
Thumb2 archs.
2015-04-16 14:30:16 +00:00
Damien George 0b32e50365 stmhal: Make pybstdio usable by other ports, and use it.
Now all ports can use pybstdio.c to provide sys.stdin/stdout/stderr, so
long as they implement mp_hal_stdin_* and mp_hal_stdout_* functions.
2015-02-13 15:04:53 +00:00
Damien George 5351a48185 stmhal: Change type of received chr from char to int. 2015-02-08 13:41:28 +00:00
Damien George 0bfc7638ba py: Protect mp_parse and mp_compile with nlr push/pop block.
To enable parsing constants more efficiently, mp_parse should be allowed
to raise an exception, and mp_compile can already raise a MemoryError.
So these functions need to be protected by an nlr push/pop block.

This patch adds that feature in all places.  This allows to simplify how
mp_parse and mp_compile are called: they now raise an exception if they
have an error and so explicit checking is not needed anymore.
2015-02-07 18:33:58 +00:00
Damien George 827b0f747b py: Change vstr_null_terminate -> vstr_null_terminated_str, returns str. 2015-01-29 13:57:23 +00:00
Damien George 0d3cb6726d py: Change vstr so that it doesn't null terminate buffer by default.
This cleans up vstr so that it's a pure "variable buffer", and the user
can decide whether they need to add a terminating null byte.  In most
places where vstr is used, the vstr did not need to be null terminated
and so this patch saves code size, a tiny bit of RAM, and makes vstr
usage more efficient.  When null termination is needed it must be
done explicitly using vstr_null_terminate.
2015-01-28 23:43:01 +00:00
Damien George 0ecd5988a2 stmhal: Remove unnecessary #include "systick.h" from pyexec.c.
Makes pyexec.c more re-usable for other ports.
2015-01-28 00:59:27 +00:00
Damien George 50912e7f5d py, unix, stmhal: Allow to compile with -Wshadow.
See issue #699.
2015-01-20 11:55:10 +00:00
Paul Sokolovsky 87bc8e2b3d pyexec: Add event-driven variant pyexec_friendly_repl().
pyexec_friendly_repl_process_char() and friends, useful for ports which
integrate into existing cooperative multitasking system.

Unlike readline() refactor before, this was implemented in less formal,
trial&error process, minor functionality regressions are still known
(like soft&hard reset support). So, original loop-based pyexec_friendly_repl()
is left intact, specific implementation selectable by config setting.
2015-01-16 01:30:42 +02:00
Damien George 2cf6dfa280 stmhal: Prefix includes with py/; remove need for -I../py. 2015-01-01 21:06:20 +00:00
Damien George 9ddbe291c4 py: Add include guards to mpconfig,misc,qstr,obj,runtime,parsehelper. 2014-12-29 01:02:19 +00:00
Paul Sokolovsky 4b60b45bfc stmhal: gccollect.h is superfluous in many places. 2014-12-21 00:58:06 +02:00
Paul Sokolovsky 6aaccc484c stmhal: Use gc_dump_info() function instead of adhoc code. 2014-12-21 00:26:10 +02:00
Paul Sokolovsky bf19586c53 stmhal: Include MICROPY_HAL_H only if defined.
Helps other ports.
2014-12-20 20:47:35 +02:00
Paul Sokolovsky 46c3ab2004 modsys: Add sys.print_exception(exc, file=sys.stdout) function.
The function is modeled after traceback.print_exception(), but unbloated,
and put into existing module to save overhead on adding another module.
Compliant traceback.print_exception() is intended to be implemented in
micropython-lib in terms of sys.print_exception().

This change required refactoring mp_obj_print_exception() to take pfenv_t
interface arguments.

Addresses #751.
2014-12-08 20:25:49 +00:00
Damien George a4c52c5a3d py: Optimise lexer by exposing lexer type.
mp_lexer_t type is exposed, mp_token_t type is removed, and simple lexer
functions (like checking current token kind) are now inlined.

This saves 784 bytes ROM on 32-bit unix, 348 bytes on stmhal, and 460
bytes on bare-arm.  It also saves a tiny bit of RAM since mp_lexer_t
is a bit smaller.  Also will run a bit more efficiently.
2014-12-05 19:35:18 +00:00
Damien George 5cbc9e0db0 stmhal: Reduce coupling between USB driver and readline.
This makes it easier to re-use readline.c and pyexec.c from stmhal in
other ports.
2014-11-27 16:58:31 +00:00
Damien George bc1488a05f stmhal: Improve REPL control codes; improve pyboard.py script.
Improvements are:

2 ctrl-C's are now needed to truly kill running script on pyboard, so
make CDC interface allow multiple ctrl-C's through at once (ie sending
b'\x03\x03' to pyboard now counts as 2 ctrl-C's).

ctrl-C in friendly-repl can now stop multi-line input.

In raw-repl mode, use ctrl-D to indicate end of running script, and also
end of any error message.  Thus, output of raw-repl is always at least 2
ctrl-D's and it's much easier to parse.

pyboard.py is now a bit faster, handles exceptions from pyboard better
(prints them and exits with exit code 1), prints out the pyboard output
while the script is running (instead of waiting till the end), and
allows to follow the output of a previous script when run with no
arguments.
2014-10-26 15:39:22 +00:00
Damien George 3be6984b8f stmhal: Don't return SystemExit value from parse_compile_execute.
There is no need, since we don't (currently) use the value.
2014-10-22 19:14:20 +01:00
Dave Hylands 8d62bbd46a Add pyb.hard_reset, and make sys.exit() or raise SystemExit do a soft reset. 2014-10-22 19:14:20 +01:00
Damien George d03c681608 stmhal: Use mp_uint_t where appropriate.
Found these by compiling stmhal with mp_uint_t of type uint32_t instead
of unsigned int.  This actually makes a difference to the code, but just
a curiosity.
2014-10-05 21:51:54 +01:00
Damien George a91ac2011f py: Make compiler return a proper exception on SyntaxError. 2014-10-05 19:01:34 +01:00
Damien George 52b5d76a6b py: Free non-interned strings in the parser when not needed.
mp_parse_node_free now frees the memory associated with non-interned
strings.  And the parser calls mp_parse_node_free when discarding a
non-used node (such as a doc string).

Also, the compiler now frees the parse tree explicitly just before it
exits (as opposed to relying on the caller to do this).

Addresses issue #708 as best we can.
2014-09-23 15:31:56 +00:00
Damien George 951ed9d02f stmhal: Fix REPL printing by cooking output sent to stdout_obj.
Recent changes to builtin print meant that print was printing to the
mp_sys_stdout_obj, which was sending data raw to the USB CDC device.
The data should be cooked so that \n turns into \r\n.
2014-07-20 13:57:43 +01:00
Damien George 7a37f647a5 Merge branch 'teensy-new' of github.com:dhylands/micropython into dhylands-teensy-new
Conflicts:
	stmhal/pin_named_pins.c
	stmhal/readline.c

Renamed HAL_H to MICROPY_HAL_H.  Made stmhal/mphal.h which intends to
define the generic Micro Python HAL, which in stmhal sits above the ST
HAL.
2014-07-02 13:42:37 +01:00
mux a75e382a9b Change MCU name config micro 2014-06-27 00:35:53 +02:00
mux fe81eea967 Add MICROPY_HW_MICRO_NAME to boards config 2014-06-19 14:40:57 +02:00
Dave Hylands 4f1b7fec9f Updated teensy to build.
Refactored some stmhal files which are shared with teensy.
2014-06-15 22:48:05 -07:00
Damien George b0edec61ac stmhal: Improve handling of out-of-memory in REPL.
Addresses issue #558, but it's likely that other out-of-memory errors
could crash the pyboard.  Reason is that qstrs use m_new and can raise
an exception within the parser.
2014-05-10 17:48:46 +01:00
Damien George 04b9147e15 Add license header to (almost) all files.
Blanket wide to all .c and .h files.  Some files originating from ST are
difficult to deal with (license wise) so it was left out of those.

Also merged modpyb.h, modos.h, modstm.h and modtime.h in stmhal/.
2014-05-03 23:27:38 +01:00
Damien George 6ec835dfef Don't print git hash as well as git tag in banner. 2014-05-03 19:08:02 +01:00
Damien George 977a0ce287 py: Print tag/version/git describe in uPy banner. 2014-05-03 19:02:14 +01:00
Damien George 5874c1c92b stmhal: Remove #include <stdint.h> from mpconfigport.h.
Make include dependencies neater, and adheres to the coding convention
that headers should not include headers.
2014-05-03 13:24:21 +01:00
Paul Sokolovsky 9b71b16a94 unix,stmhal: Make "mpconfig.h" be first included, as other headers depend on it. 2014-05-02 18:08:16 +03:00
Damien George d553be5982 build: Simplify build directory layout by putting all headers in genhdr.
Any generated headers go in $(BUILD)/genhdr/, and are #included as
'genhdr/xxx.h'.
2014-04-17 18:03:27 +01:00
Damien George 6d983539bc stmhal: Improve flash storage cache management.
Internal flash used for the filesystem is now written (from the cache)
only after a 5s delay, or when a file is closed, or when the drive is
unmounted from the host.  This delay means that multiple writes can
accumulate in the cache, and leads to less writes to the flash, making
it last longer.

It's implemented by a high-priority interrupt that takes care of flash
erase and write, and flushing the cache.

This is still only an interim solution for the flash filesystem.  It
eventually needs to be replaced with something that uses less RAM for
the cache, something that can use more of the flash, and something that
does proper wear levelling.
2014-04-16 23:08:36 +01:00
Damien George 97790455fe Improve REPL detecting when input needs to continue.
Full CPython compatibility with this requires actually parsing the
input so far collected, and if it fails parsing due to lack of tokens,
then continue collecting input.  It's not worth doing it this way.  Not
having compatibility at this level does not hurt the goals of Micro
Python.
2014-04-08 11:04:29 +00:00
Damien George 65cad12d38 py: Add option to compiler to specify default code emitter.
Also add command line option to unix port to select emitter.
2014-04-06 11:48:15 +01:00
Dave Hylands bf7d690e36 Add the git version to the banner 2014-04-03 16:55:15 -07:00
Damien George d8b47d3e02 stmhal: Fix raw REPL so that it passes through more ASCII chars. 2014-04-03 22:11:43 +01:00
Damien George d17926db71 Rename rt_* to mp_*.
Mostly just a global search and replace.  Except rt_is_true which
becomes mp_obj_is_true.

Still would like to tidy up some of the names, but this will do for now.
2014-03-30 13:35:08 +01:00
Damien George c9fd6645b0 stmhal: Factor out stdio and readline to separate files.
Adds readline_init() to clear readline history on soft reset.  Addresses
issue #387.
2014-03-29 14:20:05 +00:00