Rename "Micro Python" to "MicroPython" in REPL, help, readme's and misc.

ACKNOWLEDGEMENTS

@@ -1,4 +1,4 @@
-The Micro Python project was proudly and successfully crowdfunded
+The MicroPython project was proudly and successfully crowdfunded
 via a Kickstarter campaign which ended on 13th December 2013.  The
 project was supported by 1923 very generous backers, who pledged
 for a total of 2320 pyboards.

CODECONVENTIONS.md

@@ -41,12 +41,12 @@ Names:
 - Use CAPS_WITH_UNDERSCORE for enums and macros.
 - When defining a type use underscore_case and put '_t' after it.
 
-Integer types: Micro Python runs on 16, 32, and 64 bit machines, so it's
+Integer types: MicroPython runs on 16, 32, and 64 bit machines, so it's
 important to use the correctly-sized (and signed) integer types.  The
 general guidelines are:
 - For most cases use mp_int_t for signed and mp_uint_t for unsigned
   integer values.  These are guaranteed to be machine-word sized and
-  therefore big enough to hold the value from a Micro Python small-int
+  therefore big enough to hold the value from a MicroPython small-int
   object.
 - Use size_t for things that count bytes / sizes of objects.
 - You can use int/uint, but remember that they may be 16-bits wide.

README.md

@@ -8,19 +8,19 @@
 [istats-issue-img]: http://issuestats.com/github/micropython/micropython/badge/issue
 [istats-issue-repo]: http://issuestats.com/github/micropython/micropython
 
-The Micro Python project
-========================
+The MicroPython project
+=======================
 <p align="center">
   <img src="https://raw.githubusercontent.com/micropython/micropython/master/logo/upython-with-micro.jpg" alt="MicroPython Logo"/>
 </p>
 
-This is the Micro Python project, which aims to put an implementation
+This is the MicroPython project, which aims to put an implementation
 of Python 3.x on microcontrollers and small embedded systems.
 
 WARNING: this project is in beta stage and is subject to changes of the
 code-base, including project-wide name changes and API changes.
 
-Micro Python implements the entire Python 3.4 syntax (including exceptions,
+MicroPython implements the entire Python 3.4 syntax (including exceptions,
 "with", "yield from", etc.).  The following core datatypes are provided:
 str (including basic Unicode support), bytes, bytearray, tuple, list, dict,
 set, frozenset, array.array, collections.namedtuple, classes and instances.
@@ -33,19 +33,19 @@ Python board, the officially supported reference electronic circuit board.
 Major components in this repository:
 - py/ -- the core Python implementation, including compiler, runtime, and
   core library.
-- unix/ -- a version of Micro Python that runs on Unix.
-- stmhal/ -- a version of Micro Python that runs on the Micro Python board
+- unix/ -- a version of MicroPython that runs on Unix.
+- stmhal/ -- a version of MicroPython that runs on the MicroPython board
   with an STM32F405RG (using ST's Cube HAL drivers).
-- minimal/ -- a minimal Micro Python port. Start with this if you want
-  to port Micro Python to another microcontroller.
+- minimal/ -- a minimal MicroPython port. Start with this if you want
+  to port MicroPython to another microcontroller.
 
 Additional components:
-- bare-arm/ -- a bare minimum version of Micro Python for ARM MCUs. Used
+- bare-arm/ -- a bare minimum version of MicroPython for ARM MCUs. Used
   mostly to control code size.
-- teensy/ -- a version of Micro Python that runs on the Teensy 3.1
+- teensy/ -- a version of MicroPython that runs on the Teensy 3.1
   (preliminary but functional).
-- pic16bit/ -- a version of Micro Python for 16-bit PIC microcontrollers.
-- cc3200/ -- a version of Micro Python that runs on the CC3200 from TI.
+- pic16bit/ -- a version of MicroPython for 16-bit PIC microcontrollers.
+- cc3200/ -- a version of MicroPython that runs on the CC3200 from TI.
 - esp8266/ -- an experimental port for ESP8266 WiFi modules.
 - tests/ -- test framework and test scripts.
 - tools/ -- various tools, including the pyboard.py module.

cc3200/README.md

@@ -1,6 +1,6 @@
 # Build Instructions for the CC3200
 
-Currently the CC3200 port of Micro Python builds under Linux and OSX **but not under Windows**.
+Currently the CC3200 port of MicroPython builds under Linux and OSX **but not under Windows**.
 
 The tool chain required for the build can be found at <https://launchpad.net/gcc-arm-embedded>.
 
@@ -25,7 +25,7 @@ make BTARGET=bootloader BTYPE=release BOARD=LAUNCHXL
 ```
 
 ## Regarding old revisions of the CC3200-LAUNCHXL
-First silicon (pre-release) revisions of the CC3200 had issues with the ram blocks, and Micro Python cannot run
+First silicon (pre-release) revisions of the CC3200 had issues with the ram blocks, and MicroPython cannot run
 there. Make sure to use a **v4.1 (or higer) LAUNCHXL board** when trying this port, otherwise it won't work.
 
 ## Flashing the CC3200

cc3200/misc/help.c

@@ -30,7 +30,7 @@
 #include "py/mpconfig.h"
 #include "py/obj.h"
 
-STATIC const char help_text[] = "Welcome to Micro Python!\n"
+STATIC const char help_text[] = "Welcome to MicroPython!\n"
                                 "For online help please visit http://micropython.org/help/.\n"
                                 "For further help on a specific object, type help(obj)\n";
 

cc3200/telnet/telnet.c

@@ -108,7 +108,7 @@ typedef struct {
  DECLARE PRIVATE DATA
  ******************************************************************************/
 static telnet_data_t telnet_data;
-static const char* telnet_welcome_msg       = "Micro Python " MICROPY_GIT_TAG " on " MICROPY_BUILD_DATE "; " MICROPY_HW_BOARD_NAME " with " MICROPY_HW_MCU_NAME "\r\n";
+static const char* telnet_welcome_msg       = "MicroPython " MICROPY_GIT_TAG " on " MICROPY_BUILD_DATE "; " MICROPY_HW_BOARD_NAME " with " MICROPY_HW_MCU_NAME "\r\n";
 static const char* telnet_request_user      = "Login as: ";
 static const char* telnet_request_password  = "Password: ";
 static const char* telnet_invalid_loggin    = "\r\nInvalid credentials, try again.\r\n";

esp8266/README.md

@@ -1,5 +1,5 @@
-Micro Python port to ESP8266
-============================
+MicroPython port to ESP8266
+===========================
 
 This is a highly experimental port of MicroPython for the WiFi modules based
 on Espressif ESP8266 chip.
@@ -31,7 +31,7 @@ The tool chain required for the build is the OpenSource ESP SDK, which can be
 found at <https://github.com/pfalcon/esp-open-sdk>.  Clone this repository and
 run `make` in its directory to build and install the SDK locally.
 
-Then, to build Micro Python for the ESP8266, just run:
+Then, to build MicroPython for the ESP8266, just run:
 ```bash
 $ make
 ```

stmhal/help.c

@@ -30,7 +30,7 @@
 #include "py/obj.h"
 
 STATIC const char *help_text =
-"Welcome to Micro Python!\n"
+"Welcome to MicroPython!\n"
 "\n"
 "For online help please visit http://micropython.org/help/.\n"
 "\n"

stmhal/main.c

@@ -150,7 +150,7 @@ static const char fresh_pybcdc_inf[] =
 ;
 
 static const char fresh_readme_txt[] =
-"This is a Micro Python board\r\n"
+"This is a MicroPython board\r\n"
 "\r\n"
 "You can get started right away by writing your Python code in 'main.py'.\r\n"
 "\r\n"

stmhal/pybcdc.inf_template

@@ -87,6 +87,6 @@ ServiceBinary=%12%\usbser.sys
 
 [Strings]
 MFGFILENAME="pybcdc"
-MFGNAME="Micro Python"
+MFGNAME="MicroPython"
 DESCRIPTION="Pyboard USB Comm Port"
 SERVICE="USB Serial Driver"

stmhal/pyexec.c

@@ -206,7 +206,7 @@ STATIC int pyexec_friendly_repl_process_char(int c) {
         } else if (ret == CHAR_CTRL_B) {
             // reset friendly REPL
             mp_hal_stdout_tx_str("\r\n");
-            mp_hal_stdout_tx_str("Micro Python " MICROPY_GIT_TAG " on " MICROPY_BUILD_DATE "; " MICROPY_HW_BOARD_NAME " with " MICROPY_HW_MCU_NAME "\r\n");
+            mp_hal_stdout_tx_str("MicroPython " MICROPY_GIT_TAG " on " MICROPY_BUILD_DATE "; " MICROPY_HW_BOARD_NAME " with " MICROPY_HW_MCU_NAME "\r\n");
             mp_hal_stdout_tx_str("Type \"help()\" for more information.\r\n");
             goto input_restart;
         } else if (ret == CHAR_CTRL_C) {
@@ -350,7 +350,7 @@ int pyexec_friendly_repl(void) {
 #endif
 
 friendly_repl_reset:
-    mp_hal_stdout_tx_str("Micro Python " MICROPY_GIT_TAG " on " MICROPY_BUILD_DATE "; " MICROPY_HW_BOARD_NAME " with " MICROPY_HW_MCU_NAME "\r\n");
+    mp_hal_stdout_tx_str("MicroPython " MICROPY_GIT_TAG " on " MICROPY_BUILD_DATE "; " MICROPY_HW_BOARD_NAME " with " MICROPY_HW_MCU_NAME "\r\n");
     mp_hal_stdout_tx_str("Type \"help()\" for more information.\r\n");
 
     // to test ctrl-C

stmhal/usbd_desc.c

@@ -38,7 +38,7 @@
 #define USBD_VID                      0xf055
 #define USBD_PID                      0x9800
 #define USBD_LANGID_STRING            0x409
-#define USBD_MANUFACTURER_STRING      "Micro Python"
+#define USBD_MANUFACTURER_STRING      "MicroPython"
 #define USBD_PRODUCT_HS_STRING        "Pyboard Virtual Comm Port in HS Mode"
 #define USBD_SERIALNUMBER_HS_STRING   "000000000010"
 #define USBD_PRODUCT_FS_STRING        "Pyboard Virtual Comm Port in FS Mode"

teensy/README.md

@@ -1,6 +1,6 @@
 # Build Instructions for Teensy 3.1
 
-Currently the Teensy 3.1 port of Micro Python builds under Linux and not under Windows.
+Currently the Teensy 3.1 port of MicroPython builds under Linux and not under Windows.
 
 The tool chain required for the build can be found at <https://launchpad.net/gcc-arm-embedded>.
 

teensy/help.c

@@ -29,7 +29,7 @@
 #include "py/obj.h"
 
 STATIC const char *help_text =
-"Welcome to Micro Python!\n"
+"Welcome to MicroPython!\n"
 "\n"
 "For online help please visit http://micropython.org/help/.\n"
 "\n"

tests/cmdline/repl_basic.py.exp

@@ -1,4 +1,4 @@
-Micro Python \.\+ version
+MicroPython \.\+ version
 >>> # basic REPL tests
 >>> print(1)
 1

tests/cmdline/repl_cont.py.exp

@@ -1,4 +1,4 @@
-Micro Python \.\+ version
+MicroPython \.\+ version
 >>> # check REPL allows to continue input
 >>> 1 \\\\
 ... + 2

tests/cmdline/repl_emacs_keys.py.exp

@@ -1,4 +1,4 @@
-Micro Python \.\+ version
+MicroPython \.\+ version
 >>> # REPL tests of GNU-ish readline navigation
 >>> # history buffer navigation
 >>> 1

tests/feature_check/repl_emacs_check.py.exp

@@ -1,4 +1,4 @@
-Micro Python \.\+ version
+MicroPython \.\+ version
 >>> # Check for emacs keys in REPL
 >>> t = \.\+
 >>> t == 2

tests/run-bench-tests

@@ -58,7 +58,7 @@ def run_tests(pyb, test_dict):
     return True
 
 def main():
-    cmd_parser = argparse.ArgumentParser(description='Run tests for Micro Python.')
+    cmd_parser = argparse.ArgumentParser(description='Run tests for MicroPython.')
     cmd_parser.add_argument('--pyboard', action='store_true', help='run the tests on the pyboard')
     cmd_parser.add_argument('files', nargs='*', help='input test files')
     args = cmd_parser.parse_args()

tests/run-tests

@@ -311,7 +311,7 @@ def run_tests(pyb, tests, args):
     return True
 
 def main():
-    cmd_parser = argparse.ArgumentParser(description='Run tests for Micro Python.')
+    cmd_parser = argparse.ArgumentParser(description='Run tests for MicroPython.')
     cmd_parser.add_argument('--target', default='unix', help='the target platform')
     cmd_parser.add_argument('--device', default='/dev/ttyACM0', help='the serial device or the IP address of the pyboard')
     cmd_parser.add_argument('-b', '--baudrate', default=115200, help='the baud rate of the serial device')
@@ -319,7 +319,7 @@ def main():
     cmd_parser.add_argument('-p', '--password', default='python', help='the telnet login password')
     cmd_parser.add_argument('-d', '--test-dirs', nargs='*', help='input test directories (if no files given)')
     cmd_parser.add_argument('--write-exp', action='store_true', help='save .exp files to run tests w/o CPython')
-    cmd_parser.add_argument('--emit', default='bytecode', help='Micro Python emitter to use (bytecode or native)')
+    cmd_parser.add_argument('--emit', default='bytecode', help='MicroPython emitter to use (bytecode or native)')
     cmd_parser.add_argument('files', nargs='*', help='input test files')
     args = cmd_parser.parse_args()
 

tools/gen-changelog.sh

@@ -1,6 +1,6 @@
 #!/bin/sh
 
-echo "Micro Python change log"
+echo "MicroPython change log"
 
 for t in $(git tag | grep -v v1.0-rc1 | sort -rV); do
     echo ''

unix/main.c

@@ -153,7 +153,7 @@ STATIC char *strjoin(const char *s1, int sep_char, const char *s2) {
 #endif
 
 STATIC int do_repl(void) {
-    mp_hal_stdout_tx_str("Micro Python " MICROPY_GIT_TAG " on " MICROPY_BUILD_DATE "; " MICROPY_PY_SYS_PLATFORM " version\n");
+    mp_hal_stdout_tx_str("MicroPython " MICROPY_GIT_TAG " on " MICROPY_BUILD_DATE "; " MICROPY_PY_SYS_PLATFORM " version\n");
 
     #if MICROPY_USE_READLINE == 1