4901bdceb7
synthio: disable on more boards where it stopped fitting
2023-05-17 18:49:45 -05:00
bd9aca2526
Merge pull request #7862 from jepler/synthio-envelope
...
Synthio envelope
2023-05-03 12:42:56 -05:00
38fd6aea02
Disable synthio on two boards where it doesn't fit
2023-04-25 12:05:54 -05:00
d5b747b305
Fix board inits
2023-04-21 13:23:01 -07:00
fecc1bdedb
fix typos (partial) detected by codepell
2023-03-18 22:17:02 +07:00
e2c6cf5929
fix: Increases drive strength of 32kHz external crystal, in line with calculations specified in ST AN2867 sections 3.3, 3.4, and STM32L4 datasheet DS12023 Table 58. LSE oscillator characteristics.
...
The drive strength RCC_LSEDRIVE_LOW is marginal for the 32kHz crystal oscillator stability, and RCC_LSEDRIVE_MEDIUMLOW meets the calculated drive strength with a small margin for parasitic capacitance.
2023-02-28 14:34:10 -08:00
d9d94eacca
run updated pre-commit
2023-02-01 13:38:41 +05:30
843d6b42f9
formatting(swan_r5): lexicographically sorted the board module names in the swan_r5 makefile include [ci-skip][skip-ci]. Skip CI since this is a cosmetic change only.
2022-11-08 12:04:30 -08:00
ad9db01f5f
Implements PDMIn for STM32L4 using the SAI peripheral and decimation/filtering in software.
2022-11-04 17:27:08 -07:00
96a83ecbfe
Update mpconfigboard.h
2022-09-26 19:58:33 +02:00
e626502fd2
Add USB VID and PID from STM.
2022-09-26 19:45:33 +02:00
2bd2406d13
Update license info and remove redundant board functions.
2022-09-26 19:39:07 +02:00
8754a6ec53
Add circuitpython support for STM Nucleo-F446RE.
2022-09-26 19:12:42 +02:00
4cb69a51d5
Use MP_WEAK for default board.c routines
2022-09-08 07:36:50 -04:00
02cc6c2aee
Merge remote-tracking branch 'adafruit/main' into remove-autobrightness
2022-08-10 08:35:53 -04:00
138c92f035
Merge pull request #6727 from dhalbert/restore-deleted-modules
...
restore rainbowio and onewireio to a number of boards
2022-08-09 21:44:26 -07:00
41bcd7b260
Remove support for auto-brightness
2022-08-09 22:40:21 -04:00
34b22eac2a
restore rainbowio and onewireio to a number of boards
2022-08-09 16:10:17 -04:00
84807cd6eb
Change I2C terminology from "peripheral" to "target"
2022-08-09 13:13:19 -04:00
6e5c818311
fix extensions for atmel and 2 boards, matching main
2022-07-26 18:15:59 +02:00
eabe8b971a
list extensions instead of macros names ("bin,uf2" not BIN_UF2)
...
the modules_support_matrix usees a dictionnary per board instead of a list
optionally include the frozen modules URLs in it
2022-07-26 18:15:59 +02:00
d021d9ae4a
Move build extensions to board directories
...
- define CIRCUITPY_BUILD_EXTENSIONS to predefined values
- set CIRCUITPY_BUILD_EXTENSIONS in port and board config
- reuse the support matrix "get_settings_from_makefile" to get it
- move the existing port and board specific values
- remove the C3 specific board values because it's not the default
- update build_release_files.py to use get_settings_from_makefile
2022-07-26 18:15:50 +02:00
8bb369cac5
refactor debug UART to console UART; get working on ESP32
2022-06-30 23:16:46 -04:00
562c73bcc7
Merge pull request #6458 from blues/swan_r5_3v3_enable
...
fix(swan_r5): 3v3 was enabled but then immediately reset.
2022-06-21 13:56:58 -07:00
019a160983
exposes `DigitalInOutPin` instances on the board, initialized and reserved.
2022-06-20 14:46:58 -07:00
a889638468
feat(swan_r5): adds a basic RTC implementation.
2022-06-10 17:37:32 -07:00
260994d16e
Merge branch 'main' into display_brightness_pwm
2022-06-04 11:32:15 -05:00
cbff9dd8e3
add new argument for all boards with built-in display
2022-06-04 11:08:20 -05:00
78e4b9446b
chore(swan_r5): pre-commit formatting
2022-06-03 15:12:41 -07:00
113b070e77
fix(swan_r5): 3v3 was enabled but then immediately reset. Moved initialization to `reset_board` which happens after `reset_all_pins`.
2022-06-03 14:19:47 -07:00
321163da1a
feat(swan_r5): blink the LED on startup. set VUSB_SELECT and DISCHARGE to floating to avoid any potential issues with them being outputs.
2022-05-25 14:22:19 -07:00
65a5ad09ab
feat(swan_r5): define an `ext` attribute on the board, which contains attributes for the extended set of castellated pins
2022-05-25 14:21:03 -07:00
5bbaa3b732
feat(swan_r5): the upper 1MB of flash (bank 2) is made available for the filesystem
2022-05-25 14:19:35 -07:00
b607631ae1
feat(swan_r5): UF2 support, with UF2 family IDs assigned to stm32 chipsets.
2022-05-25 14:18:37 -07:00
1fb210bd40
Merge pull request #5491 from pypewpew/remove-gamepadshift
...
Remove gamepadshift module
2022-05-25 13:58:06 -04:00
c0152e7dab
Remove gamepadshift module
...
Everything should be using the keypad module instead.
Note: there are several boards that still had gamepadshift enabled. I
did not contact their authors to make sure they already switched to
keypad in their code and documentation. We should probably wait with
merging this for their go ahead.
2022-05-25 00:48:55 +02:00
28b14e05e3
shrink thunderpack_v12
2022-05-13 15:45:12 -04:00
8ed7b114cd
Merge branch 'main' into uzlib-module
2022-04-03 11:48:37 -05:00
7b586e077c
Removed from small boards
2022-04-02 12:22:14 -05:00
4363361c87
Board definition clean up
...
Removes:
* AUTORESET_DELAY_MS which never did anything but was introduced
somehow.
* CIRCUITPY_BOOT_BUTTON in all but one ESP board because they all have
them. There is a default based on the strapping pins.
* BOARD_USER_SAFE_MODE_ACTION because it was all the same for boards
with boot buttons. Now the safe mode code manages the message.
2022-03-21 17:58:43 -07:00
dcc3ec171e
Merge remote-tracking branch 'adafruit/7.2.x' into merge_7.2.2
2022-03-15 13:56:11 -07:00
6465d81918
Update ports/stm/boards/stm32f411ce_blackpill_with_flash/mpconfigboard.h
...
whoopsies
Co-authored-by: Scott Shawcroft <scott@tannewt.org>
2022-03-09 13:33:54 -05:00
9b2e22a6df
Make autoreload checking more robust
...
- Add reset for autoreload. De-request ticks.
- Separate state a little more in autoreload.c
- Rename some routines.
- Remove redundant settings of CIRCUITPY_AUTORELOAD_DELAY_MS.
2022-03-09 11:07:55 -05:00
83593a1558
Start of USB host API
...
This allows you to list and explore connected USB devices. It
only stubs out the methods to communicate to endpoints. That will
come in a follow up once TinyUSB has it. (It's in progress.)
Related to #5986
2022-03-07 18:07:25 -08:00
661140ebcc
Add missing BOARD_DICT_STANDARD_ITEMS to two boards
2022-03-03 09:03:34 +11:00
edee8e3409
disable on some boards
2022-02-21 00:47:05 -06:00
b2c8fd3938
add board.STEMMA_I2C alias to some boards
2022-02-02 01:18:46 +01:00
7fea970379
Merge pull request #5597 from NathanY3G/add-board-sparkfun-thing-plus-stm32
...
Add board definition for SparkFun Thing Plus - STM32
2021-12-13 14:58:04 -08:00
ffd41cf2b7
Updated USB product name to remove duplication
...
Output from lsusb now reads: SparkFun Electronics Thing Plus - STM32
2021-12-13 18:01:07 +01:00
463d94475b
Use correct PID for SparkFun Thing Plus - STM32
...
This value was kindly provided by brhoff720.
2021-12-13 17:37:02 +01:00
Jeff Epler
Scott Shawcroft
hathach
Matthew McGowan
MicroDev
flom_84
flom84
Florin Maticu
Dan Halbert
Neradoc
foamyguy
Dan Halbert
Radomir Dopieralski
Mark
gamblor21
Michael Himing
Scott Shawcroft
Nathan Young