9c1466a330
Update Sparkfun Thing Plus RP2040 pins to match board
...
This fixes some missing and incorrectly-assigned pins for the SparkFun Thing Plus RP2040 protoboard so that they actually match what the board says. This also changes the default SPI pins from the SD card pins to the breakout pins on the side of the board.
2021-04-30 09:37:37 -04:00
36edc4bb89
Improve Winbond naming and correct board settings
2021-03-23 09:06:48 -07:00
7867632a81
Merge remote-tracking branch 'adafruit/main' into rp2040_flash
2021-03-22 15:29:43 -07:00
36ae69ab6f
qtpy is more of a button than a switch! add itsybitsy rev C files
2021-03-21 18:44:32 -04:00
ebd6011633
add USBBOOT switch, move RX pin, re-enable UART (tested)
2021-03-21 14:58:18 -04:00
5d2b60cbf6
Redo RP2040 flash settings
...
This switches stage2 to C and uses Jinja to change the C code based
on flash settings from https://github.com/adafruit/nvm.toml . It
produces the fastest settings for the given set of external flashes.
Flash size is no longer hard coded so switching flashes with similar
capabilities but different sizes should *just work*.
This PR also places "ITCM" code in RAM to save the XIP cache for
code execution. Further optimization is possible. A blink code.py
still requires a number of flash fetches every blink.
Fixes #4041
2021-03-18 16:55:42 -07:00
11e510a06a
Merge pull request #4419 from spe2/main
...
Add board definition for Sparkfun Pro Micro RP2040
2021-03-17 18:17:24 -07:00
719e8710f2
Merge pull request #4411 from mintakka/thingplus-rp2040
...
added board configuration for Sparkfun ThingPlus RP2040
2021-03-17 16:23:55 -05:00
337727ba0c
renamed board folder to match board name in boards.yml
2021-03-16 21:10:10 -04:00
dcd9a8ab91
Update ports/raspberrypi/boards/sparkfun_pro_micro_rp2040/mpconfigboard.mk
...
Co-authored-by: Scott Shawcroft <scott@tannewt.org>
2021-03-16 10:54:20 -07:00
5bc132a209
Update ports/raspberrypi/boards/sparkfun_pro_micro_rp2040/mpconfigboard.h
...
Co-authored-by: Scott Shawcroft <scott@tannewt.org>
2021-03-16 10:54:15 -07:00
b5333f2bdf
Update ports/raspberrypi/boards/sparkfun_thingplus_rp2040/mpconfigboard.h
...
Co-authored-by: Scott Shawcroft <scott@tannewt.org>
2021-03-16 13:47:33 -04:00
3d15877639
Update ports/raspberrypi/boards/sparkfun_thingplus_rp2040/mpconfigboard.mk
...
Co-authored-by: Scott Shawcroft <scott@tannewt.org>
2021-03-16 13:47:21 -04:00
9de40f56f3
Add board config files
2021-03-15 22:08:19 -06:00
c9427780b3
Create pins.c
2021-03-15 22:07:24 -06:00
49baa94446
added sparkfun_thingplus_rp2040 to .github/workflows/boards.yml and renamed board folder to include chip
2021-03-15 23:00:24 -04:00
288415f867
Update ports/raspberrypi/boards/sparkfun_thingplus/mpconfigboard.h
...
Co-authored-by: Scott Shawcroft <scott@tannewt.org>
2021-03-15 21:07:31 -04:00
30a74b3d92
Update ports/raspberrypi/boards/sparkfun_thingplus/mpconfigboard.mk
...
Co-authored-by: Scott Shawcroft <scott@tannewt.org>
2021-03-15 21:07:24 -04:00
0567d06936
added board configuration for Sparkfun ThingPlus RP2040
2021-03-15 10:27:21 -04:00
a52eb88031
run code formatting script
2021-03-15 19:27:36 +05:30
b0fca4fcda
feather rp2040: enable default board.UART
2021-03-03 13:13:06 -06:00
b27afad9cb
move LED to the right spot in the file
2021-03-02 19:02:38 -06:00
8bfd308d37
feather rp2040: add board.LED
2021-03-02 13:16:09 -06:00
f560b5f3a3
raspberry: switch pico back to the boot2 for W25Q16
...
Presumably, switching it to generic hurt performance a bit.
I verified that the build-raspberry_pi_pico/boot2_padded_checksummed.S
built file has the same checksum as the old
bs2_default_padded_checksummed.S
2021-03-02 08:08:41 -06:00
af9dfccab1
Update QT Py flash size
2021-03-01 10:34:25 -08:00
dac047db61
Update Feather RP2040 to 8MB
2021-03-01 10:33:04 -08:00
f0432b9d6f
Remove neopixel power
2021-02-25 16:37:34 -08:00
80f7972f72
Update RP2040 Feather pinout for production rev
2021-02-25 14:46:08 -08:00
001d7299b2
Merge pull request #4228 from ZodiusInfuser/rp2040-boards
...
Added definitions for Pimoroni RP2040-based boards
2021-02-23 10:00:19 -08:00
1a0bf4c33f
Added flash size for PicoSystem
2021-02-23 11:04:20 +00:00
a9951c9b6c
Added flash size for Keybow2040
2021-02-23 11:01:40 +00:00
ca9b7debe0
Added flash size for Tiny2040
2021-02-23 10:43:35 +00:00
863981a5b8
Parens
2021-02-22 18:31:45 -08:00
0aafeac209
Board specific flash sizes for RP2040
...
Stop-gap solution for #4041 . Comment is there to provide info
needed in the future. (We currently run the generic "safe" settings.)
2021-02-22 17:19:18 -08:00
52f2fd6d53
Removed trailing white space
2021-02-20 17:25:26 +00:00
417173b752
Removed trailing white space
2021-02-20 17:24:26 +00:00
9a4b8c5ed9
Removed trailing white space
2021-02-20 17:23:23 +00:00
dea498a51f
Added new line
2021-02-20 17:20:28 +00:00
9fbeb0baea
Added new line
2021-02-20 17:20:06 +00:00
03577ec81c
Added new line
2021-02-20 17:19:45 +00:00
dac81ea545
Added new line
2021-02-20 17:19:31 +00:00
0a00f91979
Added new line
2021-02-20 17:15:42 +00:00
f1df07002f
Added new line
2021-02-20 17:15:20 +00:00
27bc5492f5
Added other files for PicoSystem
2021-02-20 13:37:08 +00:00
e9c7af1dee
Added board.c for PicoSystem
2021-02-20 13:36:46 +00:00
fb7cce6503
Added other files for Keybow2040
2021-02-20 13:35:27 +00:00
7ac20bfb8b
Added board.c for Keybow2040
2021-02-20 13:35:06 +00:00
66dd74cd12
Added other files for Tiny2040
2021-02-20 13:33:54 +00:00
ad8916499d
Added board.c for Tiny2040
2021-02-20 13:32:54 +00:00
ee5a48fece
Delete pimoroni_tiny2040
2021-02-19 18:30:29 +00:00
nm3210
Scott Shawcroft
lady ada
Scott Shawcroft
Jeff Epler
mintakka
spe2
microDev
Jeff Epler
ZodiusInfuser