ee5536386d
Merge remote-tracking branch 'adafruit/main' into rpi
2021-11-24 14:23:23 -08:00
a1052d5f73
Initial broadcom port for Raspberry Pi
...
This targets the 64-bit CPU Raspberry Pis. The BCM2711 on the Pi 4
and the BCM2837 on the Pi 3 and Zero 2W. There are 64-bit fixes
outside of the ports directory for it.
There are a couple other cleanups that were incidental:
* Use const mcu_pin_obj_t instead of omitting the const. The structs
themselves are const because they are in ROM.
* Use PTR <-> OBJ conversions in more places. They were found when
mp_obj_t was set to an integer type rather than pointer.
* Optimize submodule checkout because the Pi submodules are heavy
and unnecessary for the vast majority of builds.
Fixes #4314
2021-11-22 14:54:44 -08:00
d063bf2675
Initial commit for IS31
2021-11-20 13:46:11 -06:00
b01e2d6674
enable running asyncio
2021-11-10 16:00:38 -05:00
3e020a73a8
Disable gifio if no displayio & for small boards
...
Technically all gifio needs from displayio is the definition of
colorspaces, but let's just disable it for now.
2021-10-26 08:54:18 -05:00
c34b6f757f
Implement gifio.GifWriter
...
This involves:
* Adding a new "L8" colorspace for colorconverters
* factoring out displayio_colorconverter_convert_pixel
* Making a minimal "colorspace only" version of displayio for the
unix port (testing purposes)
* fixing an error message
I only tested writing B&W animated images, with the following script:
```python
import displayio
import gifio
with gifio.GifWriter("foo.gif", 64, 64, displayio.Colorspace.L8) as g:
for i in range(0, 256, 14):
data = bytes([i, 255-i] * 32 + [255-i, i] * 32) * 32
print("add_frame")
g.add_frame(data)
# expected to raise an error, buffer is not big enough
with gifio.GifWriter("/dev/null", 64, 64, displayio.Colorspace.L8) as g:
g.add_frame(bytes([3,3,3]))
```
2021-10-26 08:54:18 -05:00
53c5bde924
core: Enable new performance optimizations
...
These two optional optimzations take a little codespace but improve
bytecode performance:
* https://github.com/micropython/micropython/pull/7680
* https://github.com/micropython/micropython/pull/7688
2021-10-15 10:39:47 -05:00
973a90f2aa
Rename esp32s2 port to espressif
...
This is in preparation for ESP32-S3 support and potentially others.
Related to #4363
2021-09-13 16:44:55 -07:00
d526925d49
make aesio module full build dependent
2021-09-02 19:02:01 +05:30
7520feed1c
Move ParallelBus to its own module
2021-08-29 07:33:54 -05:00
25437dcb33
Merge branch 'main' into atexit
2021-08-20 09:45:54 +05:30
1c4a6c3667
atexit module refinements
...
- add test for atexit module
- add callback to gc collection
- fix callback memory allocation
- execute callback on both code and repl exit
2021-08-16 21:37:32 +05:30
de796e2304
Move OneWire to `onewireio` from `busio`
...
This will allow finer grained inclusion in 8.0.0
Fixes #5135
2021-08-12 10:47:14 -07:00
fb6b438580
Make `getpass` and `traceback` full build only
...
This leaves much more space on SAMD21 builds that aren't "full builds".
These are new APIs that we don't need to add to old boards.
Also, tweak two Arduino boards to save space on them.
2021-08-11 14:47:35 -07:00
0c1d6cef75
Merge remote-tracking branch 'adafruit/main' into fix_cp_irremote
2021-08-11 13:43:59 -07:00
083960ce90
Fix SAMD51 builds and Prox Trinkey
...
Adds CIRCUITPY_BUSIO_UART to disable UART by raising ValueError
that no pins work.
2021-08-11 11:53:26 -07:00
51f8603783
add getpass module
2021-08-09 17:50:28 +05:30
063e3946d6
Merge pull request #5094 from jepler/quirc
...
Add qrio: Decode QR codes with quirc lib
2021-08-07 09:30:20 +05:30
bd903f2f03
Add qrio: Decode QR codes with quirc lib
2021-08-04 09:16:00 -05:00
a3998d0626
add atexit module
2021-07-30 09:32:28 +05:30
f371c0a609
add traceback module
2021-07-28 18:06:23 +05:30
901a6c27c0
remove gamepad; deprecate gamepadshift
2021-07-26 22:15:09 -04:00
f84cb94819
Remove OSError(0) and old network modules
...
The newer modules are `socketpool` and `ssl`.
Fixes #3924 , related to #2021 , closes #1880 , closes #2273 , closes #2274
2021-07-21 17:33:40 -07:00
0fadf028ef
Create first BLE-only board, Micro:Bit v2
...
This fixes build issues with USB off, tweaks the README to allow
for BLE-only boards and adds the Micro:Bit v2 definition.
Fixes #4546
2021-07-14 09:55:51 -07:00
4579bf9b12
Rename rainbow to rainbowio
2021-07-12 14:40:01 -04:00
289575a811
Adding rainbow module.
2021-07-08 15:55:13 -04:00
3177973843
Add BLE serial service
2021-06-25 15:00:10 -07:00
04b69cde9b
turn off gamepad on most builds;turn off keypad where appropriate
2021-06-17 13:46:45 -04:00
7d23206018
Inital keypad work: Keys working: one pin per key
...
keypad.Buttons and keypad.State
Buttons -> Keys; further work
wip
wip
wip: compiles
about to try
keypad.Keys working
2021-06-08 20:27:31 -04:00
9752162508
Merge pull request #4765 from dhalbert/rotary-trinkey-rev-c-pins
...
Update various Trinkey pins and add _pixelbuf
2021-05-15 11:52:33 -04:00
1e2a945782
Make busio.SPI be NotImplementedError on proxlight to save space
2021-05-14 21:52:54 -04:00
fa6c06fb38
count in/out endpoints; allow more usb modules on low-endpoint boards
2021-05-13 21:59:02 -04:00
0651ef17dd
Fix endpoint checking; Clean up safe mode printing.
2021-05-12 15:53:52 -04:00
42f4065c8a
Merge remote-tracking branch 'adafruit/main' into merge_1.13
2021-05-06 11:17:53 -07:00
fc8e1c4c2e
address review comments
2021-05-05 12:35:12 -04:00
f0bb26d70f
Merge MicroPython 1.13 into CircuitPython
2021-05-04 18:06:33 -07:00
8bb3c6fd79
handle := defs in shared_bindings_matrix.py; update adafruit_hid
2021-05-04 18:07:01 -04:00
adc3d7d55e
update Python API according to review comments
2021-05-03 22:29:02 -04:00
d2b558993e
merge from main, including MicroPython 1.12 merge
2021-05-03 20:56:04 -04:00
96101016ec
Include pulseio only on CIRCUITPY_FULL_BUILD
2021-04-30 23:13:32 -04:00
8500e846c6
partially working
2021-04-27 23:53:23 -04:00
f98a54628b
wip: compiles
2021-04-27 14:37:36 -04:00
7a40b4daec
very much WIP
2021-04-26 23:54:01 -04:00
c26e49c2e6
wip: starting to try to compile
2021-04-25 23:17:41 -04:00
9d1fcc3b14
merge from main
2021-04-25 10:27:52 -04:00
2ba2574ebf
Merge pull request #4619 from tyomitch/microbit
...
[build] Allow USB to be set to 0
2021-04-24 10:31:29 -04:00
4e3c1d4a4c
[build] Allow USB to be set to 0
...
Unify USB-related makefile var and C def as CIRCUITPY_USB.
Always define it as 0 or 1, same as all other settings.
USB_AVAILABLE was conditionally defined in supervisor.mk,
but never actually used to #ifdef USB-related code.
Loosely related to #4546
2021-04-23 11:13:34 -04:00
51ccf8dc30
wip: revert usb_descriptor changes; use raw descriptors instead
2021-04-19 23:24:18 -04:00
fc4538f845
WIP: Implement 'ParallelImageCapture' for samd51
2021-04-16 17:18:59 -05:00
4a7e129287
wip: latent usb device enabling/disabling
2021-04-13 23:33:44 -04:00
Scott Shawcroft
Timon
gamblor21
Dan Halbert
Jeff Epler
microDev
Kattni Rembor
Limor "Ladyada" Fried
Dan Halbert
Artyom Skrobov