66efed5ba5
fix AuthMode printing regression
2022-12-15 15:49:58 -05:00
297657ea9a
Refactor so that all sites of name lookup failure result in gaierror
2022-12-14 14:45:32 -06:00
398b7c26ca
Merge pull request #7321 from jepler/dotenv-becomes-toml
...
Dotenv becomes toml
2022-12-13 19:56:36 -05:00
d49af4d784
make wording a bit clearer
2022-12-13 08:11:47 -06:00
aa5b1e063f
Added new RP2040 board with integrated SD/Card reader and RTC
2022-12-13 13:34:28 +01:00
adff93c61a
Mark cyw43 pins "never reset" before reset_port
...
reset_port calls reset_all_pins, which disables the built-in pull
down. In theory, this could allow some CYW43 interfacing pin to float
to an inappropriate value. There's no proof of this! but the move can't
really hurt, either
2022-12-12 20:14:08 -06:00
90894014a2
Use the HW LED as status indicator
...
For me this made a rare startup failure stop, which is nonsense.
2022-12-12 19:43:10 -06:00
243ecc2502
remove debugging prints
2022-12-08 14:18:22 -06:00
1fe05cb8cd
pico w: re-use previous connection if ssid matches
2022-12-08 12:44:34 -06:00
ff8d051eff
Add an additional large delay time at start for pico w boards
2022-12-07 15:10:13 -06:00
d7874e65c2
Merge pull request #7299 from BooleanMattock/main
...
Fix to Issue #7224 - Servo update slow due to PWM channel duty cycle update busy-wait
2022-12-05 12:54:41 -08:00
afb5301cef
Fix to Issue #7224 - tested
2022-12-02 20:21:40 -05:00
4c064c263e
Merge pull request #7294 from tannewt/analogbufio_rework
...
Rework the analogbufio API.
2022-12-02 14:53:16 -08:00
f7504ff857
Tweaks based on review comments
2022-12-02 10:19:31 -08:00
255e997345
Rework the analogbufio API.
...
* read() is now readinto() and takes the buffer to write into.
* readinto() returns the number of valid samples.
* readinto() can be interrupted by ctrl-c.
* readinto() API doesn't support signed numbers because it never did.
* sample_rate is now required in the constructor because supported
values will vary per-port.
* 16 bit values are full range. 12 bit samples from RP2040 are stretched
in the same way they are for AnalogIn.
Fixes #7226
2022-12-01 17:46:07 -08:00
3fb4fd81e9
Revert "debug_dhcp to follow general debug"
2022-11-30 22:44:18 +02:00
0738d50834
debug_dhcp to follow general debug
2022-11-30 22:24:21 +02:00
f8070d2141
Change comment, and logic on dhcpserver
2022-11-30 21:51:50 +02:00
44d5326d4c
fix picow-ap
2022-11-30 19:36:00 +02:00
362018dcca
Merge branch 'main' into picow-ap
2022-11-30 19:11:03 +02:00
c13ca95da1
Add MDNS support to Pico W
...
This adds both cpy-MAC.local and circuitpython.local support.
Fixes #7214
2022-11-28 16:15:28 -08:00
ad2d190507
Merge pull request #7247 from tannewt/picow_web_workflow
...
Enable* web workflow for Pico W
2022-11-28 14:19:42 -08:00
30563655d7
Merge pull request #7249 from dhalbert/wifi-connect-ap-api
...
correct Radio.connect() and .start_ap() signatures; clean up some code
2022-11-23 10:29:05 -08:00
17be447c4b
correct Radio.connect() and .start_ap() signatures; clean up some code
2022-11-22 17:11:03 -05:00
6d022733b3
Merge pull request #7162 from rhooper/boards-list
...
add boards list to make error message
2022-11-21 23:18:37 -05:00
c3a96a63c0
Enable* web workflow for Pico W
...
* Except for circuitpython.local which depends on MDNS and will be
done in a follow up PR.
Progress on #7214
2022-11-21 16:24:05 -08:00
b40facd0b4
Error msg changes
2022-11-22 01:00:34 +02:00
1611cf98da
have clock start high in SPI mode 3
2022-11-18 18:27:38 -05:00
88bd9ef6b8
just change the ap error
2022-11-18 22:51:05 +02:00
c3c1717813
refactor common port specific Makefile code
2022-11-18 23:00:28 +05:30
e2a3597263
add awesome new make error message
...
Copied from initial implementation on atmel-samd
Co-authored-by: Rose Hooper <rhooper@toybox.ca>
Co-authored-by: Jeff Epler <jepler@gmail.com>
2022-11-18 11:27:23 +05:30
b8cd6c093f
picow-ap progress
2022-11-17 21:47:39 +02:00
a234b74e87
Merge branch 'adafruit:main' into picow-ap
2022-11-16 21:32:46 +02:00
6689b9ad09
Merge pull request #7208 from domdfcoding/weact_pico_16mb
...
Add support for the 16MB WeAct Studio Pico
2022-11-16 09:59:37 -08:00
ef34378b1d
Merge pull request #7201 from jepler/rp2040-light-sleep
...
raspberrypi: Make port_idle_until_interrupt work
2022-11-15 17:25:48 -06:00
ef93eda0a0
Merge pull request #7192 from bill88t/picow-debug
...
Fix pi cow debug compilation
2022-11-15 14:08:44 -06:00
6954e569b7
since it ain't leaving..
2022-11-15 00:05:01 +02:00
fde1c05e6d
Revert "remove lwip_src"
...
This reverts commit 398e9122a0
2022-11-14 20:03:41 +02:00
398e9122a0
remove lwip_src
2022-11-14 19:33:06 +02:00
6ad61a3fd1
Radio.c work
2022-11-14 19:31:18 +02:00
2e6dd1bf1f
Radio.c no longer needs ping.h
2022-11-14 18:36:42 +02:00
cdab078d9d
shared-bindings: Get rid of CYW43 special cases in shared-bindings
...
.. by moving it into a new weak function that can be replaced
just by the picow build.
2022-11-14 08:44:08 -06:00
e1046b1050
Add support for the 16MB WeAct Studio Pico
2022-11-14 14:04:07 +00:00
8f414eb4ee
Merge pull request #7179 from jepler/picow-voltage-monitor
...
Add ability to read VOLTAGE_MONITOR on Pico W
2022-11-13 22:40:54 -05:00
e4d620f055
make whitespace match
2022-11-12 09:17:52 -06:00
78fc43baab
raspberrypi: Make port_idle_until_interrupt work
...
This needs thorough testing before it's merged, as we tried
and reverted this once before (#5341 and #5356 ).
I think that besides checking for tinyusb having "something to do",
the fact that `port_interrupt_after_ticks` and `port_disable_tick`
weren't implemented that was causing a secondary problem.
I've tested this on a pico w over reboot-cycles and ctrl-c-cycles,
with and without drive automounting, with and without serial repl open,
and on a power-only connection.
I didn't notice the problem reported in #5356 after merely implementing
port_idle_until_interrupt; but I did notice that sleeps in general would
take over-long until "something" (like writing to the USB drive) happened;
I think "something" was probably calling port_enable_tick(). When this
problem was happening, sleeps would take a lot longer; for instance,
`sleep(.001)` would take about 1/20s and `sleep(.1)` would take about 1/7s.
2022-11-12 09:16:41 -06:00
983502d6e3
ignore pin changes before sleep
2022-11-11 15:31:49 -05:00
e6a4e2982f
Update ports/raspberrypi/common-hal/wifi/Radio.c
...
u32_t -> uint32_t
Co-authored-by: MicroDev <70126934+MicroDev1@users.noreply.github.com>
2022-11-11 14:40:47 +02:00
0bf9df232a
fix debug
2022-11-11 14:17:57 +02:00
11f1174658
picow: Change init to use country code routine.....place holder for future improvements to allow country code setting.
2022-11-10 17:24:09 +02:00
Dan Halbert
Jeff Epler
Dan Halbert
Pontus Oldberg
Scott Shawcroft
BooleanMattock
Bill Sideris
MicroDev
Dominic Davis-Foster
paul-1